| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2015 |
| * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * Based on: |
| * Copyright (C) 2012 Freescale Semiconductor, Inc. |
| * |
| * Configuration settings for the Freescale i.MX6DL aristainetos2 board. |
| */ |
| #ifndef __ARISTAINETOS2_CONFIG_H |
| #define __ARISTAINETOS2_CONFIG_H |
| |
| #define CONFIG_HOSTNAME "aristainetos2" |
| |
| #define CONFIG_MXC_UART_BASE UART2_BASE |
| #define CONSOLE_DEV "ttymxc1" |
| |
| #define CONFIG_FEC_XCV_TYPE RGMII |
| |
| /* Framebuffer */ |
| #define CONFIG_SYS_LDB_CLOCK 28341000 |
| #define CONFIG_LG4573 |
| |
| #include "mx6_common.h" |
| |
| #define CONFIG_MACH_TYPE 4501 |
| #define CONFIG_MMCROOT "/dev/mmcblk0p1" |
| |
| /* MMC Configs */ |
| #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR |
| |
| #define IMX_FEC_BASE ENET_BASE_ADDR |
| #define CONFIG_ETHPRIME "FEC" |
| #define CONFIG_FEC_MXC_PHYADDR 0 |
| |
| #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN |
| |
| #ifdef CONFIG_IMX_HAB |
| #define HAB_EXTRA_SETTINGS \ |
| "hab_check_addr=" \ |
| "if hab_auth_img ${check_addr} ${filesize} ; then " \ |
| "true;" \ |
| "else " \ |
| "echo \"HAB checks ${hab_check_filetype} " \ |
| "failed!\"; " \ |
| "false; " \ |
| "fi;\0" \ |
| "hab_check_file_fit=" \ |
| "if env exists enable_hab_check && test " \ |
| "${enable_hab_check} -eq 1 ; then " \ |
| "setenv hab_check_filetype \"FIT file on SD card " \ |
| "or eMMC\";" \ |
| "env set check_addr ${fit_addr_r};" \ |
| "run hab_check_addr;" \ |
| "else " \ |
| "true; "\ |
| "fi;\0" \ |
| "hab_check_file_bootscript=" \ |
| "if env exists enable_hab_check && test " \ |
| "${enable_hab_check} -eq 1 ; then " \ |
| "setenv hab_check_filetype \"Bootscript file\";" \ |
| "env set check_addr ${loadaddr};" \ |
| "run hab_check_addr;" \ |
| "else " \ |
| "true; "\ |
| "fi;\0" \ |
| "hab_check_flash_fit=" \ |
| "if env exists enable_hab_check && test " \ |
| "${enable_hab_check} -eq 1 ; then " \ |
| "setenv hab_check_filetype \"FIT files on flash\";" \ |
| "env set check_addr ${fit_addr_r};" \ |
| "run hab_check_addr;" \ |
| "else " \ |
| "true; "\ |
| "fi;\0" \ |
| "enable_hab_check=1\0" |
| #else |
| #define HAB_EXTRA_SETTINGS \ |
| "hab_check_file_fit=echo HAB check FIT file always returns " \ |
| "true;true\0" \ |
| "hab_check_flash_fit=echo HAB check flash FIT always returns " \ |
| "true;true\0" \ |
| "hab_check_file_bootscript=echo HAB check bootscript always " \ |
| "returns true;true\0" \ |
| "enable_hab_check=0\0" |
| #endif |
| |
| #if (CONFIG_SYS_BOARD_VERSION == 3) |
| #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ |
| "dead=led led_red on\0" \ |
| "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \ |
| "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ |
| "-(ubi-nor);gpmi-nand:-(ubi)\0" \ |
| "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ |
| "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ |
| "mainboot=echo Booting from SD-card ...; " \ |
| "run mainargs addmtd addmisc;" \ |
| "if test -n ${addmiscM}; then run addmiscM;fi;" \ |
| "if test -n ${addmiscC}; then run addmiscC;fi;" \ |
| "if test -n ${addmiscD}; then run addmiscD;fi;" \ |
| "run boot_board_type;" \ |
| "bootm ${fit_addr_r}\0" \ |
| "mainargs=setenv bootargs console=${console},${baudrate} " \ |
| "root=${mmcroot}\0" \ |
| "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ |
| "${fit_file}\0" \ |
| "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ |
| "${fit_addr_r} ${rescue_fit_file}\0" |
| #elif (CONFIG_SYS_BOARD_VERSION == 4) |
| #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ |
| "dead=led led_red on;led led_red2 on;\0" \ |
| "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \ |
| "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ |
| "-(ubi-nor);gpmi-nand:-(ubi)\0" \ |
| "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ |
| "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ |
| "mainboot=echo Booting from SD-card ...; " \ |
| "run mainargs addmtd addmisc;" \ |
| "if test -n ${addmiscM}; then run addmiscM;fi;" \ |
| "if test -n ${addmiscC}; then run addmiscC;fi;" \ |
| "if test -n ${addmiscD}; then run addmiscD;fi;" \ |
| "run boot_board_type;" \ |
| "bootm ${fit_addr_r}\0" \ |
| "mainargs=setenv bootargs console=${console},${baudrate} " \ |
| "root=${mmcroot}\0" \ |
| "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ |
| "${fit_file}\0" \ |
| "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ |
| "${fit_addr_r} ${rescue_fit_file}\0" |
| #elif (CONFIG_SYS_BOARD_VERSION == 5) |
| #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ |
| "emmcpart=1\0" \ |
| "emmc_rescue_part=3\0" \ |
| "emmcdev=1\0" \ |
| "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \ |
| "dead=led led_red on\0" \ |
| "mtdids=nor0=spi0.0\0" \ |
| "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ |
| "-(ubi-nor)\0" \ |
| "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ |
| "bootmode=${bootmode} mmcpart=${mmcpart} " \ |
| "emmcpart=${emmcpart}\0" \ |
| "mainboot=echo Booting from eMMC ...; " \ |
| "run mainargs addmtd addmisc;" \ |
| "if test -n ${addmiscM}; then run addmiscM;fi;" \ |
| "if test -n ${addmiscC}; then run addmiscC;fi;" \ |
| "if test -n ${addmiscD}; then run addmiscD;fi;" \ |
| "run boot_board_type;" \ |
| "bootm ${fit_addr_r}\0" \ |
| "mainargs=setenv bootargs console=${console},${baudrate} " \ |
| "root=${emmcroot} rootfstype=ext4\0 " \ |
| "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ |
| "${fit_file}; " \ |
| "imi ${fit_addr_r}\0 " \ |
| "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \ |
| "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0" |
| #else |
| #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ |
| "dead=led led_red on\0" \ |
| "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \ |
| "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \ |
| "-(ubi-nor);gpmi-nand:-(ubi)\0" \ |
| "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ |
| "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ |
| "mainboot=echo Booting from SD-card ...; " \ |
| "run mainargs addmtd addmisc;" \ |
| "if test -n ${addmiscM}; then run addmiscM;fi;" \ |
| "if test -n ${addmiscC}; then run addmiscC;fi;" \ |
| "if test -n ${addmiscD}; then run addmiscD;fi;" \ |
| "run boot_board_type;" \ |
| "bootm ${fit_addr_r}\0" \ |
| "mainargs=setenv bootargs console=${console},${baudrate} " \ |
| "root=${mmcroot}\0" \ |
| "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ |
| "${fit_file}\0" \ |
| "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ |
| "${fit_addr_r} ${rescue_fit_file}\0" |
| #endif |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "disable_giga=yes\0" \ |
| "usb_pgood_delay=2000\0" \ |
| "nor_bootdelay=-2\0" \ |
| "script=u-boot.scr\0" \ |
| "fit_file=/boot/system.itb\0" \ |
| "rescue_fit_file=/boot/rescue.itb\0" \ |
| "loadaddr=0x12000000\0" \ |
| "fit_addr_r=0x14000000\0" \ |
| "uboot=/boot/u-boot.imx\0" \ |
| "uboot_sz=d0000\0" \ |
| "panel=lb07wv8\0" \ |
| "splashpos=m,m\0" \ |
| "console=" CONSOLE_DEV "\0" \ |
| "fdt_high=0xffffffff\0" \ |
| "initrd_high=0xffffffff\0" \ |
| "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ |
| "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \ |
| "get_env=mw ${loadaddr} 0 0x20000;" \ |
| "mmc rescan;" \ |
| "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} env.txt;" \ |
| "env import -t ${loadaddr}\0" \ |
| "default_env=gpio set wp_spi_nor.gpio-hog;" \ |
| "sf probe;" \ |
| "sf protect unlock 0 0x1000000;" \ |
| "mw ${loadaddr} 0 0x20000;" \ |
| "env export -t ${loadaddr} serial# ethaddr " \ |
| "board_type panel addmisc addmiscM addmiscC addmiscD;" \ |
| "env default -a;" \ |
| "env import -t ${loadaddr}\0" \ |
| "loadbootscript=" \ |
| "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ |
| "${script};\0" \ |
| "loadbootscriptUSB=" \ |
| "ext4load usb 0 ${loadaddr} ${script};\0" \ |
| "loadbootscriptUSBf=" \ |
| "fatload usb 0 ${loadaddr} ${script};\0" \ |
| "bootscriptUSB=echo Running bootscript from usb-stick ...; " \ |
| "source\0" \ |
| "bootscript=echo Running bootscript from mmc ...; " \ |
| "source\0" \ |
| "mmcpart=1\0" \ |
| "mmcrescuepart=3\0" \ |
| "mmcdev=0\0" \ |
| "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ |
| "mmcargs=setenv bootargs console=${console},${baudrate} " \ |
| "root=${mmcroot}\0" \ |
| "mmcboot=echo Booting from mmc ...; " \ |
| "run mmcargs addmtd addmisc;" \ |
| "if test -n ${addmiscM}; then run addmiscM;fi;" \ |
| "if test -n ${addmiscC}; then run addmiscC;fi;" \ |
| "if test -n ${addmiscD}; then run addmiscD;fi;" \ |
| "run boot_board_type;" \ |
| "bootm ${fit_addr_r}\0" \ |
| "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ |
| "${fit_file}\0" \ |
| "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ |
| "${uboot}\0" \ |
| "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ |
| "${fit_addr_r} ${rescue_fit_file}\0" \ |
| "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ |
| "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ |
| "setexpr uboot_maxsize ${uboot_sz} - 400;" \ |
| "mw.b ${cmp_buf} 0x00 ${uboot_sz};" \ |
| "run mmc_load_uboot;sf probe;sf erase 0 ${uboot_sz};" \ |
| "sf write ${loadaddr} 400 ${filesize};" \ |
| "sf read ${cmp_buf} 400 ${uboot_sz};" \ |
| "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ |
| "rescueargs=setenv bootargs console=${console},${baudrate} " \ |
| "root=/dev/ram rw\0 " \ |
| "rescueboot=echo Booting rescue system ...; " \ |
| "run rescueargs addmtd addmisc;" \ |
| "if test -n ${rescue_reason}; then run rescue_reason;fi;" \ |
| "if test -n ${addmiscM}; then run addmiscM;fi;" \ |
| "if test -n ${addmiscC}; then run addmiscC;fi;" \ |
| "if test -n ${addmiscD}; then run addmiscD;fi;" \ |
| "run boot_board_type;" \ |
| "if bootm ${fit_addr_r}; then ; " \ |
| "else " \ |
| "run dead; " \ |
| "fi; \0" \ |
| "r_reason_syserr=setenv rescue_reason setenv bootargs " \ |
| "\\\\${bootargs} " \ |
| "rescueReason=18\0 " \ |
| "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \ |
| "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \ |
| "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \ |
| "${rescue_fit_file}\0" \ |
| "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \ |
| "${rescue_fit_file}\0" \ |
| "usbroot=/dev/sda1 rootwait rw\0" \ |
| "usbboot=echo Booting from usb-stick ...; " \ |
| "run usbargs addmtd addmisc;" \ |
| "if test -n ${addmiscM}; then run addmiscM;fi;" \ |
| "if test -n ${addmiscC}; then run addmiscC;fi;" \ |
| "if test -n ${addmiscD}; then run addmiscD;fi;" \ |
| "run boot_board_type;" \ |
| "bootm ${fit_addr_r}\0" \ |
| "usbargs=setenv bootargs console=${console},${baudrate} " \ |
| "root=${usbroot}\0" \ |
| "mmc_rescue_boot=" \ |
| "run r_reason_syserr;" \ |
| "if run mmc_rescue_load_fit hab_check_file_fit; then " \ |
| "run rescueboot; " \ |
| "else " \ |
| "run dead; " \ |
| "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \ |
| "fi;\0" \ |
| "main_rescue_boot=" \ |
| "if run main_load_fit hab_check_flash_fit; then " \ |
| "if run mainboot; then ; " \ |
| "else " \ |
| "run r_reason_syserr;" \ |
| "if run rescue_load_fit hab_check_file_fit;" \ |
| "then run rescueboot; " \ |
| "else " \ |
| "run dead; " \ |
| "echo RESCUE SYSTEM BOOT FAILURE;" \ |
| "fi; " \ |
| "fi; " \ |
| "else " \ |
| "run r_reason_syserr;" \ |
| "if run rescue_load_fit hab_check_file_fit; then " \ |
| "run rescueboot; " \ |
| "else " \ |
| "run dead; " \ |
| "echo RESCUE SYSTEM BOOT FAILURE;" \ |
| "fi; " \ |
| "fi;\0" \ |
| "usb_mmc_rescue_boot=" \ |
| "usb start;" \ |
| "if usb storage; then " \ |
| "if run loadbootscriptUSB " \ |
| "hab_check_file_bootscript;" \ |
| "then run bootscriptUSB; " \ |
| "fi; " \ |
| "if run loadbootscriptUSBf " \ |
| "hab_check_file_bootscript;" \ |
| "then run bootscriptUSB; " \ |
| "fi; " \ |
| "if run usb_load_fit hab_check_file_fit; then " \ |
| "run usbboot; " \ |
| "fi; " \ |
| "if run usb_load_fitf hab_check_file_fit; then " \ |
| "run usbboot; " \ |
| "fi; "\ |
| "if run usb_load_rescuefit hab_check_file_fit;" \ |
| "then run r_reason_syserr rescueboot;" \ |
| "fi; " \ |
| "if run usb_load_rescuefitf hab_check_file_fit;" \ |
| "then run r_reason_syserr rescueboot;" \ |
| "fi; " \ |
| "run mmc_rescue_boot;" \ |
| "fi; "\ |
| "run mmc_rescue_boot;\0" \ |
| "rescue_xload_boot=" \ |
| "run r_reason_syserr;" \ |
| "if test ${bootmode} -ne 0 ; then " \ |
| "mmc dev ${mmcdev};" \ |
| "if mmc rescan; then " \ |
| "if run mmc_rescue_load_fit " \ |
| "hab_check_file_fit; then " \ |
| "run rescueboot; " \ |
| "else " \ |
| "usb start;" \ |
| "if usb storage; then " \ |
| "if run usb_load_rescuefit " \ |
| "hab_check_file_fit;"\ |
| "then " \ |
| "run rescueboot;" \ |
| "fi; " \ |
| "if run usb_load_rescuefitf "\ |
| "hab_check_file_fit;"\ |
| "then " \ |
| "run rescueboot;" \ |
| "fi; " \ |
| "fi;" \ |
| "fi;" \ |
| "run dead; " \ |
| "echo RESCUE SYSTEM ON SD OR " \ |
| "USB BOOT FAILURE;" \ |
| "else " \ |
| "usb start;" \ |
| "if usb storage; then " \ |
| "if run usb_load_rescuefit " \ |
| "hab_check_file_fit; then " \ |
| "run rescueboot;" \ |
| "fi; " \ |
| "if run usb_load_rescuefitf " \ |
| "hab_check_file_fit; then " \ |
| "run rescueboot;" \ |
| "fi; " \ |
| "fi;" \ |
| "run dead; " \ |
| "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \ |
| "fi; " \ |
| "else "\ |
| "if run rescue_load_fit hab_check_file_fit; then " \ |
| "run rescueboot; " \ |
| "else " \ |
| "run dead; " \ |
| "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \ |
| "fi; " \ |
| "fi;\0" \ |
| "ari_boot=if test ${bootmode} -ne 0 ; then " \ |
| "mmc dev ${mmcdev};" \ |
| "if mmc rescan; then " \ |
| "if run loadbootscript hab_check_file_bootscript;" \ |
| "then run bootscript; " \ |
| "fi; " \ |
| "if run mmc_load_fit hab_check_file_fit; then " \ |
| "if run mmcboot; then ; " \ |
| "else " \ |
| "run mmc_rescue_boot;" \ |
| "fi; " \ |
| "else " \ |
| "run usb_mmc_rescue_boot;" \ |
| "fi; " \ |
| "else " \ |
| "run usb_mmc_rescue_boot;" \ |
| "fi; " \ |
| "else "\ |
| "run main_rescue_boot;" \ |
| "fi; \0"\ |
| HAB_EXTRA_SETTINGS \ |
| CONFIG_EXTRA_ENV_BOARD_SETTINGS |
| |
| #define CONFIG_ARP_TIMEOUT 200UL |
| |
| /* Physical Memory Map */ |
| #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM |
| #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR |
| #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE |
| |
| #define CONFIG_SYS_INIT_SP_OFFSET \ |
| (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
| #define CONFIG_SYS_INIT_SP_ADDR \ |
| (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) |
| |
| #define CONFIG_SYS_FSL_USDHC_NUM 2 |
| |
| /* NAND stuff */ |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #define CONFIG_SYS_NAND_BASE 0x40000000 |
| #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| |
| /* DMA stuff, needed for GPMI/MXS NAND support */ |
| |
| /* USB Configs */ |
| #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */ |
| #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) |
| #define CONFIG_MXC_USB_FLAGS 0 |
| |
| /* UBI support */ |
| |
| /* Framebuffer */ |
| /* check this console not needed, after test remove it */ |
| #define CONFIG_SPLASH_SCREEN |
| #define CONFIG_SPLASH_SCREEN_ALIGN |
| #define CONFIG_IMX_VIDEO_SKIP |
| #define CONFIG_VIDEO_LOGO |
| #define CONFIG_VIDEO_BMP_LOGO |
| #define CONFIG_BMP_16BPP |
| #define CONFIG_VIDEO_BMP_RLE8 |
| |
| #define CONFIG_IMX6_PWM_PER_CLK 66000000 |
| |
| #endif /* __ARISTAINETOS2_CONFIG_H */ |