Merge with /home/sr/git/u-boot/cfi-flash
diff --git a/CHANGELOG b/CHANGELOG
index 4c5b62c..5040a6b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -29,6 +29,46 @@
factor of 1000)
Patch by Anders Larsen, 31 Mar 2006
+* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+
+ 405 SDRAM: - The SDRAM parameters can now be defined in the board
+ config file and the 405 SDRAM controller values will
+ be calculated upon bootup (see PPChameleonEVB).
+ When those settings are not defined in the board
+ config file, the register setup will be as it is now,
+ so this implementation should not break any current
+ design using this code.
+
+ Thanks to Andrea Marson from DAVE for this patch.
+
+ 440 DDR: - Added function sdram_tr1_set to auto calculate the
+ TR1 value for the DDR.
+ - Added ECC support (see p3p440).
+
+ Patch by Stefan Roese, 17 Mar 2006
+
+* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
+ Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
+
+* Add support for ymodem protocol download
+ Patch by Stefano Babic, 29 Mar 2006
+
+* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
+ Merge from Markus Klotzbücher's repo, 01 Apr 2006
+
+* GCC-4.x fixes: clean up global data pointer initialization for all
+ boards
+
+* Update for Delta board:
+ - redundant NAND environment
+ - misc Monahans cleanups (remove dead code etc.)
+ - DA9030 Initialization; some minimal changes to PXA I2C driver to
+ make it work with the Monahans.
+ - Make Monahans clock frequency configurable using
+ CFG_MONAHANS_RUN_MODE_OSC_RATIO and
+ CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
+ Merge from Markus Klotzbücher's repo, 25 Mar 2006
+
* Enable Quad UART om MCC200 board.
* Cleanup MCC200 board configuration; omit non-existent stuff.
diff --git a/README b/README
index 38fbfbf..ae9e10f 100644
--- a/README
+++ b/README
@@ -246,6 +246,7 @@
CONFIG_SA1110
CONFIG_ARM7
CONFIG_PXA250
+ CONFIG_CPU_MONAHANS
MicroBlaze based CPUs:
----------------------
@@ -304,13 +305,13 @@
-----------------
CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
- CONFIG_CSB637, CONFIG_DNP1110, CONFIG_EP7312,
- CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7,
- CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_KB9202,
- CONFIG_LART, CONFIG_LPD7A400, CONFIG_LUBBOCK,
- CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON,
- CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410,
- CONFIG_TRAB, CONFIG_VCMA9
+ CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110,
+ CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
+ CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+ CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400,
+ CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
+ CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400,
+ CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9
MicroBlaze based boards:
------------------------
@@ -379,6 +380,20 @@
that this requires a (stable) reference clock (32 kHz
RTC clock or CFG_8XX_XIN)
+- Intel Monahans options:
+ CFG_MONAHANS_RUN_MODE_OSC_RATIO
+
+ Defines the Monahans run mode to oscillator
+ ratio. Valid values are 8, 16, 24, 31. The core
+ frequency is this value multiplied by 13 MHz.
+
+ CFG_MONAHANS_TURBO_RUN_MODE_RATIO
+
+ Defines the Monahans turbo mode to oscillator
+ ratio. Valid values are 1 (default if undefined) and
+ 2. The core frequency as calculated above is multiplied
+ by this value.
+
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
@@ -1969,6 +1984,17 @@
These two #defines specify the offset and size of the environment
area within the first NAND device.
+ - CFG_ENV_OFFSET_REDUND
+
+ This setting describes a second storage area of CFG_ENV_SIZE
+ size used to hold a redundant copy of the environment data,
+ so that there is a valid backup copy in case there is a
+ power failure during a "saveenv" operation.
+
+ Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned
+ to a block boundary, and CFG_ENV_SIZE must be a multiple of
+ the NAND devices block size.
+
- CFG_SPI_INIT_OFFSET
Defines offset to the initial SPI buffer area in DPRAM. The
@@ -3283,6 +3309,8 @@
==> U-Boot will use R8 to hold a pointer to the global data
+NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope,
+or current versions of GCC may "optimize" the code too much.
Memory Management:
------------------
diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
index 0934e1b..40f41c7 100644
--- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
+++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c
@@ -1,6 +1,7 @@
/*
* (C) Copyright 2002
* Hyperion Entertainment, ThomasF@hyperion-entertainment.com
+ * (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -88,8 +89,6 @@
void after_reloc (ulong dest_addr, gd_t *gd)
{
-/* HJF: DECLARE_GLOBAL_DATA_PTR; */
-
board_init_r (gd, dest_addr);
}
diff --git a/board/MAI/AmigaOneG3SE/articiaS.c b/board/MAI/AmigaOneG3SE/articiaS.c
index a4dad64..3901b80 100644
--- a/board/MAI/AmigaOneG3SE/articiaS.c
+++ b/board/MAI/AmigaOneG3SE/articiaS.c
@@ -29,6 +29,8 @@
#include "smbus.h"
#include "via686.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#undef DEBUG
struct dimm_bank {
@@ -82,7 +84,6 @@
long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks)
{
- DECLARE_GLOBAL_DATA_PTR;
int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR;
uint32 busclock = gd->bus_clk;
uint32 memclock = busclock;
@@ -394,8 +395,6 @@
long articiaS_ram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
register uint32 i;
register uint32 value1;
register uint32 value2;
diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c
index d2e9f29..480dae5 100644
--- a/board/MAI/AmigaOneG3SE/articiaS_pci.c
+++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c
@@ -26,6 +26,8 @@
#include "memio.h"
#include "articiaS.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#undef ARTICIA_PCI_DEBUG
#ifdef ARTICIA_PCI_DEBUG
@@ -493,8 +495,6 @@
int articiaS_init_vga (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
extern void shutdown_bios(void);
pci_dev_t dev = ~0;
int busnr = 0;
diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c
index 3e2835a..143bba2 100644
--- a/board/MAI/AmigaOneG3SE/cmd_boota.c
+++ b/board/MAI/AmigaOneG3SE/cmd_boota.c
@@ -3,6 +3,7 @@
#include "../disk/part_amiga.h"
#include <asm/cache.h>
+DECLARE_GLOBAL_DATA_PTR;
#undef BOOTA_DEBUG
@@ -108,8 +109,6 @@
s = getenv ("autostart");
if (s && strcmp (s, "yes") == 0) {
- DECLARE_GLOBAL_DATA_PTR;
-
void (*boot) (bd_t *, char *, block_dev_desc_t *);
char *args;
diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c
index e83fb46..b6f57c7 100644
--- a/board/MAI/AmigaOneG3SE/serial.c
+++ b/board/MAI/AmigaOneG3SE/serial.c
@@ -4,6 +4,8 @@
#include "memio.h"
#include "articiaS.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#ifndef CFG_NS16550
static uint32 ComPort1;
@@ -150,8 +152,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint32 clock_divisor = 115200 / gd->baudrate;
NS16550_init (Com0, clock_divisor);
@@ -239,8 +239,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint32 clock_divisor = 115200 / gd->baudrate;
NS16550_init (Com0, clock_divisor);
diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c
index c797e47..3606db8 100644
--- a/board/MAI/AmigaOneG3SE/via686.c
+++ b/board/MAI/AmigaOneG3SE/via686.c
@@ -28,6 +28,8 @@
#include "via686.h"
#include "i8259.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#undef VIA_DEBUG
#ifdef VIA_DEBUG
@@ -226,33 +228,31 @@
extern unsigned long via_calibrate_time_base(void);
-void via_calibrate_bus_freq(void)
+void via_calibrate_bus_freq (void)
{
- DECLARE_GLOBAL_DATA_PTR;
+ unsigned long tb;
- unsigned long tb;
+ /* This is 20 microseconds */
+#define CALIBRATE_TIME 28636
- /* This is 20 microseconds */
- #define CALIBRATE_TIME 28636
+ /* Enable the timer (and disable speaker) */
+ unsigned char c;
+ c = in_byte (0x61);
+ out_byte (0x61, ((c & ~0x02) | 0x01));
- /* Enable the timer (and disable speaker) */
- unsigned char c;
- c = in_byte(0x61);
- out_byte(0x61, ((c & ~0x02) | 0x01));
+ /* Set timer 2 to low/high writing */
+ out_byte (0x43, 0xb0);
+ out_byte (0x42, CALIBRATE_TIME & 0xff);
+ out_byte (0x42, CALIBRATE_TIME >> 8);
- /* Set timer 2 to low/high writing */
- out_byte(0x43, 0xb0);
- out_byte(0x42, CALIBRATE_TIME & 0xff);
- out_byte(0x42, CALIBRATE_TIME >>8);
+ /* Read the time base */
+ tb = via_calibrate_time_base ();
- /* Read the time base */
- tb = via_calibrate_time_base();
-
- if (tb >= 700000)
- gd->bus_clk = 133333333;
- else
- gd->bus_clk = 100000000;
+ if (tb >= 700000)
+ gd->bus_clk = 133333333;
+ else
+ gd->bus_clk = 100000000;
}
diff --git a/board/MAI/AmigaOneG3SE/video.c b/board/MAI/AmigaOneG3SE/video.c
index 36e3c62..f6327f7 100644
--- a/board/MAI/AmigaOneG3SE/video.c
+++ b/board/MAI/AmigaOneG3SE/video.c
@@ -26,6 +26,8 @@
#include "memio.h"
#include <part.h>
+DECLARE_GLOBAL_DATA_PTR;
+
unsigned char *cursor_position;
unsigned int cursor_row;
unsigned int cursor_col;
@@ -480,7 +482,6 @@
void video_banner(void)
{
block_dev_desc_t *ide;
- DECLARE_GLOBAL_DATA_PTR;
int i;
char *s;
int maxdev;
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 9d0d213..6a1d4d7 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -45,13 +45,13 @@
#include "ns16550.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_MPSC
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
int clock_divisor = 230400 / gd->baudrate;
#endif
@@ -88,8 +88,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
}
@@ -97,8 +95,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = 230400 / gd->baudrate;
#ifdef CFG_INIT_CHAN1
@@ -130,8 +126,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = 230400 / gd->baudrate;
#ifdef CFG_INIT_CHAN1
diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c
index ccb3adc..d8acd31 100644
--- a/board/Marvell/db64360/mpsc.c
+++ b/board/Marvell/db64360/mpsc.c
@@ -42,6 +42,8 @@
#include "../include/memory.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* Define this if you wish to use the MPSC as a register based UART.
* This will force the serial port to not use the SDMA engine at all.
*/
@@ -114,9 +116,7 @@
/* Clear the CFR (CHR4) */
/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
- temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&". Assuming "= &"
-
-REG_GAP));
+ temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
temp &= 0xffffff00;
temp |= BIT29;
GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
@@ -158,7 +158,6 @@
* global variables [josh] */
int mpsc_putchar_early (char ch)
{
- DECLARE_GLOBAL_DATA_PTR;
int mpsc = CHANNEL;
int temp =
GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -511,7 +510,6 @@
int galbrg_set_baudrate (int channel, int rate)
{
- DECLARE_GLOBAL_DATA_PTR;
int clock;
galbrg_disable (channel); /*ok */
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
index 3c5dee7..e5a87ad 100644
--- a/board/Marvell/db64360/mv_eth.c
+++ b/board/Marvell/db64360/mv_eth.c
@@ -732,6 +732,7 @@
pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
pkt_info.byte_cnt = dataSize;
pkt_info.buf_ptr = (unsigned int) dataPtr;
+ pkt_info.return_info = 0;
status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c
index d2635f8..f04aaf9 100644
--- a/board/Marvell/db64360/sdram_init.c
+++ b/board/Marvell/db64360/sdram_init.c
@@ -42,6 +42,8 @@
#include "64360.h"
#include "mv_regs.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#undef DEBUG
#define MAP_PCI
@@ -246,8 +248,6 @@
/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long spd_checksum;
#ifdef ZUMA_NTL
diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c
index 33fbc49..b783aff 100644
--- a/board/Marvell/db64460/mpsc.c
+++ b/board/Marvell/db64460/mpsc.c
@@ -42,6 +42,8 @@
#include "../include/memory.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* Define this if you wish to use the MPSC as a register based UART.
* This will force the serial port to not use the SDMA engine at all.
*/
@@ -114,9 +116,7 @@
/* Clear the CFR (CHR4) */
/* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */
- temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&". Assuming "= &"
-
-REG_GAP));
+ temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP));
temp &= 0xffffff00;
temp |= BIT29;
GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP),
@@ -158,7 +158,6 @@
* global variables [josh] */
int mpsc_putchar_early (char ch)
{
- DECLARE_GLOBAL_DATA_PTR;
int mpsc = CHANNEL;
int temp =
GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -511,7 +510,6 @@
int galbrg_set_baudrate (int channel, int rate)
{
- DECLARE_GLOBAL_DATA_PTR;
int clock;
galbrg_disable (channel); /*ok */
diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
index ec5d581..b2c7835 100644
--- a/board/Marvell/db64460/mv_eth.c
+++ b/board/Marvell/db64460/mv_eth.c
@@ -731,6 +731,7 @@
pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
pkt_info.byte_cnt = dataSize;
pkt_info.buf_ptr = (unsigned int) dataPtr;
+ pkt_info.return_info = 0;
status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c
index 8cfe84c..1762202 100644
--- a/board/Marvell/db64460/sdram_init.c
+++ b/board/Marvell/db64460/sdram_init.c
@@ -42,6 +42,8 @@
#include "64460.h"
#include "mv_regs.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#undef DEBUG
#define MAP_PCI
@@ -246,8 +248,6 @@
/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long spd_checksum;
#ifdef ZUMA_NTL
diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c
index 5e770e9..c430d63 100644
--- a/board/adsvix/adsvix.c
+++ b/board/adsvix/adsvix.c
@@ -30,6 +30,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/*
@@ -38,8 +40,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -62,8 +62,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c
index a2595ee..dcafac9 100644
--- a/board/amcc/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -28,6 +28,8 @@
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
+DECLARE_GLOBAL_DATA_PTR;
+
long int fixed_sdram(void);
int board_early_init_f(void)
@@ -107,7 +109,7 @@
long dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram(0);
+ dram_size = spd_sdram();
#else
dram_size = fixed_sdram();
#endif
@@ -235,8 +237,6 @@
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index c6b79a9..06a57f6c 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -28,6 +28,7 @@
#include <spd_sdram.h>
#include "epld.h"
+DECLARE_GLOBAL_DATA_PTR;
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
@@ -291,8 +292,6 @@
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index d1a29c5..3f6d204 100644
--- a/board/amcc/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -30,6 +30,8 @@
#include <spd_sdram.h>
#include <ppc4xx_enet.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define BOOT_SMALL_FLASH 32 /* 00100000 */
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
@@ -204,7 +206,7 @@
long dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram (0);
+ dram_size = spd_sdram ();
#else
dram_size = fixed_sdram ();
#endif
@@ -334,8 +336,6 @@
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
index f1a96a6..292e026 100644
--- a/board/amcc/walnut/walnut.c
+++ b/board/amcc/walnut/walnut.c
@@ -99,7 +99,7 @@
*/
long int initdram(int board_type)
{
- return spd_sdram(0);
+ return spd_sdram();
}
int testdram(void)
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 8ddf910..20965c8 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -24,6 +24,8 @@
#include <asm/processor.h>
#include <spd_sdram.h>
+DECLARE_GLOBAL_DATA_PTR;
+
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
int board_early_init_f(void)
@@ -136,7 +138,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
uint pbcr;
int size_val = 0;
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 509d8e4..392d0dc 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -24,6 +24,8 @@
#include <asm/processor.h>
#include <spd_sdram.h>
+DECLARE_GLOBAL_DATA_PTR;
+
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
int board_early_init_f(void)
@@ -132,7 +134,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
uint pbcr;
int size_val = 0;
diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c
index 39c4157..c6ee772 100644
--- a/board/amirix/ap1000/serial.c
+++ b/board/amirix/ap1000/serial.c
@@ -27,9 +27,7 @@
#include <ns16550.h>
-#if 0
-#include "serial.h"
-#endif
+DECLARE_GLOBAL_DATA_PTR;
const NS16550_t COM_PORTS[] =
{ (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 };
@@ -40,8 +38,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
(void) NS16550_init (COM_PORTS[0], clock_divisor);
@@ -71,8 +67,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
#ifdef CFG_INIT_CHAN1
diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c
index de04c66..ca5bd1d 100644
--- a/board/armadillo/armadillo.c
+++ b/board/armadillo/armadillo.c
@@ -28,6 +28,8 @@
#include <common.h>
#include <clps7111.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
@@ -37,8 +39,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Activate LED flasher */
IO_LEDFLSH = 0x40;
@@ -53,8 +53,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c
index d3ccbb5..4f84a58 100644
--- a/board/assabet/assabet.c
+++ b/board/assabet/assabet.c
@@ -27,6 +27,8 @@
#include <common.h>
#include <SA-1100.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/*
@@ -99,8 +101,6 @@
int
board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_arch_number = MACH_TYPE_ASSABET;
gd->bd->bi_boot_params = 0xc0000100;
@@ -112,8 +112,6 @@
int
dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c
index 9016776..002981a 100644
--- a/board/at91rm9200dk/at91rm9200dk.c
+++ b/board/at91rm9200dk/at91rm9200dk.c
@@ -27,6 +27,8 @@
#include <at91rm9200_net.h>
#include <dm9161.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations
@@ -34,8 +36,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Enable Ctrlc */
console_init_f ();
@@ -56,8 +56,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
return 0;
diff --git a/board/bmw/serial.c b/board/bmw/serial.c
index f36a41b..712a95b 100644
--- a/board/bmw/serial.c
+++ b/board/bmw/serial.c
@@ -24,6 +24,8 @@
#include <common.h>
#include "ns16550.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#if CONFIG_CONS_INDEX == 1
static struct NS16550 *console =
(struct NS16550 *) (CFG_EUMB_ADDR + 0x4500);
@@ -38,8 +40,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = gd->bus_clk / 16 / gd->baudrate;
NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor);
@@ -75,8 +75,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate;
NS16550_reinit (console, clock_divisor);
diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c
index cc1bc16..307894f 100644
--- a/board/cerf250/cerf250.c
+++ b/board/cerf250/cerf250.c
@@ -27,6 +27,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
@@ -36,8 +38,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -60,8 +60,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c
index 4d2013b..d34737c 100644
--- a/board/cm4008/cm4008.c
+++ b/board/cm4008/cm4008.c
@@ -31,6 +31,8 @@
#include <common.h>
#include <asm/arch/platform.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
@@ -75,8 +77,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of CM4008 */
gd->bd->bi_arch_number = 624;
@@ -92,8 +92,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c
index 65eaa94..02d05af 100644
--- a/board/cm41xx/cm41xx.c
+++ b/board/cm41xx/cm41xx.c
@@ -31,6 +31,8 @@
#include <common.h>
#include <asm/arch/platform.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
@@ -75,8 +77,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of CM41xx */
gd->bd->bi_arch_number = 672;
@@ -92,8 +92,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c
index 14168e6..9ae3c42 100644
--- a/board/cmc_pu2/cmc_pu2.c
+++ b/board/cmc_pu2/cmc_pu2.c
@@ -33,6 +33,8 @@
#include <at91rm9200_net.h>
#include <dm9161.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations
@@ -45,7 +47,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
AT91PS_PIO piob = AT91C_BASE_PIOB;
AT91PS_PIO pioc = AT91C_BASE_PIOC;
@@ -109,8 +110,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
return 0;
diff --git a/board/cogent/serial.c b/board/cogent/serial.c
index 4c20017..2b595a8 100644
--- a/board/cogent/serial.c
+++ b/board/cogent/serial.c
@@ -6,6 +6,8 @@
#include <common.h>
#include <board/cogent/serial.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR)
#if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \
@@ -25,76 +27,65 @@
int serial_init (void)
{
-/* DECLARE_GLOBAL_DATA_PTR; */
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+ cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */
+ serial_setbrg ();
+ cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
+ cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */
+ cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
- cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */
- serial_setbrg ();
- cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
- cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */
- cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
-
- return (0);
+ return (0);
}
-void
-serial_setbrg (void)
+void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
+ unsigned int divisor;
+ unsigned char lcr;
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
- unsigned int divisor;
- unsigned char lcr;
+ if ((divisor = br_to_div (gd->baudrate)) == 0)
+ divisor = DEFDIV;
- if ((divisor = br_to_div(gd->baudrate)) == 0)
- divisor = DEFDIV;
-
- lcr = cma_mb_reg_read(&mbsp->ser_lcr);
- cma_mb_reg_write(&mbsp->ser_lcr, lcr|0x80);/* Access baud rate(set DLAB)*/
- cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff);
- cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff);
- cma_mb_reg_write(&mbsp->ser_lcr, lcr); /* unset DLAB */
+ lcr = cma_mb_reg_read (&mbsp->ser_lcr);
+ cma_mb_reg_write (&mbsp->ser_lcr, lcr | 0x80); /* Access baud rate(set DLAB) */
+ cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
+ cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
+ cma_mb_reg_write (&mbsp->ser_lcr, lcr); /* unset DLAB */
}
-void
-serial_putc(const char c)
+void serial_putc (const char c)
{
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
- if (c == '\n')
- serial_putc('\r');
+ if (c == '\n')
+ serial_putc ('\r');
- while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0)
- ;
+ while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
- cma_mb_reg_write(&mbsp->ser_thr, c);
+ cma_mb_reg_write (&mbsp->ser_thr, c);
}
-void
-serial_puts(const char *s)
+void serial_puts (const char *s)
{
- while (*s != '\0')
- serial_putc(*s++);
+ while (*s != '\0')
+ serial_putc (*s++);
}
-int
-serial_getc(void)
+int serial_getc (void)
{
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
- while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0)
- ;
+ while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
- return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f);
+ return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
}
-int
-serial_tstc(void)
+int serial_tstc (void)
{
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
- return ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) != 0);
+ return ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) != 0);
}
#endif /* CONS_NONE */
@@ -118,71 +109,63 @@
#error CONFIG_KGDB_INDEX must be configured for Cogent motherboard serial
#endif
-void
-kgdb_serial_init(void)
+void kgdb_serial_init (void)
{
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
- unsigned int divisor;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
+ unsigned int divisor;
- if ((divisor = br_to_div(CONFIG_KGDB_BAUDRATE)) == 0)
- divisor = DEFDIV;
+ if ((divisor = br_to_div (CONFIG_KGDB_BAUDRATE)) == 0)
+ divisor = DEFDIV;
- cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */
- cma_mb_reg_write(&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB)*/
- cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff);
- cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff);
- cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
- cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */
- cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
+ cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */
+ cma_mb_reg_write (&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB) */
+ cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff);
+ cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff);
+ cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */
+ cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */
+ cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */
- printf("[on cma10x serial port B] ");
+ printf ("[on cma10x serial port B] ");
}
-void
-putDebugChar(int c)
+void putDebugChar (int c)
{
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
- while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0)
- ;
+ while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0);
- cma_mb_reg_write(&mbsp->ser_thr, c & 0xff);
+ cma_mb_reg_write (&mbsp->ser_thr, c & 0xff);
}
-void
-putDebugStr(const char *str)
+void putDebugStr (const char *str)
{
- while (*str != '\0') {
- if (*str == '\n')
- putDebugChar('\r');
- putDebugChar(*str++);
- }
+ while (*str != '\0') {
+ if (*str == '\n')
+ putDebugChar ('\r');
+ putDebugChar (*str++);
+ }
}
-int
-getDebugChar(void)
+int getDebugChar (void)
{
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
- while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0)
- ;
+ while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0);
- return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f);
+ return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f);
}
-void
-kgdb_interruptible(int yes)
+void kgdb_interruptible (int yes)
{
- cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE;
+ cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE;
- if (yes == 1) {
- printf("kgdb: turning serial ints on\n");
- cma_mb_reg_write(&mbsp->ser_ier, 0xf);
- }
- else {
- printf("kgdb: turning serial ints off\n");
- cma_mb_reg_write(&mbsp->ser_ier, 0x0);
- }
+ if (yes == 1) {
+ printf ("kgdb: turning serial ints on\n");
+ cma_mb_reg_write (&mbsp->ser_ier, 0xf);
+ } else {
+ printf ("kgdb: turning serial ints off\n");
+ cma_mb_reg_write (&mbsp->ser_ier, 0x0);
+ }
}
#endif /* KGDB && KGDB_NONE */
diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c
index 6f65f32..6d8d555 100644
--- a/board/cradle/cradle.c
+++ b/board/cradle/cradle.c
@@ -28,6 +28,8 @@
#include <asm/arch/pxa-regs.h>
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
@@ -181,8 +183,6 @@
board_init (void)
/**********************************************************/
{
- DECLARE_GLOBAL_DATA_PTR;
-
led_code (0xf, YELLOW);
/* arch number of HHP Cradle */
@@ -209,8 +209,6 @@
dram_init (void)
/**********************************************************/
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index c99a715..80caf8b 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -26,6 +26,8 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
#else
@@ -65,8 +67,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -88,8 +88,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c
index 6100a53..aeb1a13 100644
--- a/board/csb637/csb637.c
+++ b/board/csb637/csb637.c
@@ -26,6 +26,8 @@
#include <at91rm9200_net.h>
#include <bcm5221.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations
@@ -33,8 +35,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Enable Ctrlc */
console_init_f ();
@@ -51,8 +51,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
return 0;
diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c
index 5844a5c..3edd27a 100644
--- a/board/cu824/cu824.c
+++ b/board/cu824/cu824.c
@@ -2,7 +2,7 @@
* (C) Copyright 2001
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
- * (C) Copyright 2001, 2002
+ * (C) Copyright 2001-2006
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
* See file CREDITS for list of people who contributed to this
@@ -29,12 +29,12 @@
#include <asm/processor.h>
#include <pci.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define BOARD_REV_REG 0xFE80002B
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char revision = *(volatile char *)(BOARD_REV_REG);
char buf[32];
diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c
index 29676b8..64fe948 100644
--- a/board/dave/B2/B2.c
+++ b/board/dave/B2/B2.c
@@ -27,13 +27,14 @@
#include <common.h>
#include <asm/hardware.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Miscelaneous platform dependent initialization
*/
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
u32 temp;
/* Configuration Port Control Register*/
@@ -119,8 +120,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c
index 52055b8..e8302d9 100644
--- a/board/dave/PPChameleonEVB/PPChameleonEVB.c
+++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c
@@ -29,6 +29,8 @@
#include <command.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/* Prototypes */
@@ -81,8 +83,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* adjust flash start and size as well as the offset */
gd->bd->bi_flashstart = 0 - flash_info[0].size;
gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN;
diff --git a/board/delta/config.mk b/board/delta/config.mk
index 9564625..c72e956 100644
--- a/board/delta/config.mk
+++ b/board/delta/config.mk
@@ -2,7 +2,7 @@
#TEXT_BASE = 0xa1700000
#TEXT_BASE = 0xa3080000
#TEXT_BASE = 0x9ffe0000
-TEXT_BASE = 0xa3008000
+TEXT_BASE = 0x83008000
# Compile the new NAND code (needed iff #ifdef CONFIG_NEW_NAND_CODE)
BOARDLIBS = drivers/nand/libnand.a
diff --git a/board/delta/delta.c b/board/delta/delta.c
index 3ffcc2a..b7671dd 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -26,9 +26,15 @@
*/
#include <common.h>
+#include <i2c.h>
+#include <da9030.h>
+#include <asm/arch/pxa-regs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */
+static void init_DA9030(void);
/*
* Miscelaneous platform dependent initialisations
@@ -36,8 +42,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -54,14 +58,13 @@
{
setenv("stdout", "serial");
setenv("stderr", "serial");
+ init_DA9030();
return 0;
}
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
@@ -73,3 +76,81 @@
return 0;
}
+
+void i2c_init_board()
+{
+ CKENB |= (CKENB_4_I2C);
+
+ /* setup I2C GPIO's */
+ GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */
+ GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */
+}
+
+/* initialize the DA9030 Power Controller */
+static void init_DA9030()
+{
+ uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
+
+ CKENB |= CKENB_7_GPIO;
+ udelay(100);
+
+ /* Rising Edge on EXTON to reset DA9030 */
+ GPIO17 = 0x8800; /* configure GPIO17, no pullup, -down */
+ GPDR0 |= (1<<17); /* GPIO17 is output */
+ GSDR0 = (1<<17);
+ GPCR0 = (1<<17); /* drive GPIO17 low */
+ GPSR0 = (1<<17); /* drive GPIO17 high */
+
+#if CFG_DA9030_EXTON_DELAY
+ udelay((unsigned long) CFG_DA9030_EXTON_DELAY); /* wait for DA9030 */
+#endif
+ GPCR0 = (1<<17); /* drive GPIO17 low */
+
+ /* reset the watchdog and go active (0xec) */
+ val = (SYS_CONTROL_A_HWRES_ENABLE |
+ (0x6<<4) |
+ SYS_CONTROL_A_WDOG_ACTION |
+ SYS_CONTROL_A_WATCHDOG);
+ if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) {
+ printf("Error accessing DA9030 via i2c.\n");
+ return;
+ }
+
+ i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
+ i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */
+ i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */
+ i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */
+ i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */
+ i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */
+ i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */
+ i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */
+ i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */
+ i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */
+ i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */
+ i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */
+ i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */
+ i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */
+ i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */
+ i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */
+ i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */
+
+ val = i2c_reg_read(addr, STATUS);
+ if(val & STATUS_CHDET)
+ printf("Charger detected, turning on LED.\n");
+ else {
+ printf("No charger detetected.\n");
+ /* undervoltage? print error and power down */
+ }
+}
+
+
+#if 0
+/* reset the DA9030 watchdog */
+void hw_watchdog_reset(void)
+{
+ uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
+ val = i2c_reg_read(addr, SYS_CONTROL_A);
+ val |= SYS_CONTROL_A_WATCHDOG;
+ i2c_reg_write(addr, SYS_CONTROL_A, val);
+}
+#endif
diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S
index 498cf7f..f059db5 100644
--- a/board/delta/lowlevel_init.S
+++ b/board/delta/lowlevel_init.S
@@ -1,10 +1,5 @@
/*
- * Most of this taken from Redboot hal_platform_setup.h with cleanup
- *
- * NOTE: I haven't clean this up considerably, just enough to get it
- * running. See hal_platform_setup.h for the source. See
- * board/cradle/lowlevel_init.S for another PXA250 setup that is
- * much cleaner.
+ * (C) Copyright 2006 DENX Software Engineering
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -31,14 +26,6 @@
DRAM_SIZE: .long CFG_DRAM_SIZE
-/* wait for coprocessor write complete */
-.macro CPWAIT reg
- mrc p15,0,\reg,c2,c0,0
- mov \reg,\reg
- sub pc,pc,#4
-.endm
-
-
.macro wait time
ldr r2, =OSCR
mov r3, #0
@@ -49,13 +36,9 @@
bls 0b
.endm
-/*
- * Memory setup
- */
-
.globl lowlevel_init
lowlevel_init:
- /* Set up GPIO pins first ----------------------------------------- */
+ /* Set up GPIO pins first */
mov r10, lr
/* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */
@@ -73,22 +56,7 @@
bic r1, r1, #0x80000000
str r1, [r0]
- /* ---------------------------------------------------------------- */
- /* Enable memory interface */
- /* ---------------------------------------------------------------- */
-
- /* ---------------------------------------------------------------- */
- /* Step 1: Wait for at least 200 microsedonds to allow internal */
- /* clocks to settle. Only necessary after hard reset... */
- /* FIXME: can be optimized later */
- /* ---------------------------------------------------------------- */
-; wait #300
-
mem_init:
-
-#define NEW_SDRAM_INIT 1
-#ifdef NEW_SDRAM_INIT
-
/* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */
ldr r0, =ACCR
ldr r1, [r0]
@@ -99,7 +67,7 @@
/* 2. Programm MDCNFG, leaving DMCEN de-asserted */
ldr r0, =MDCNFG
ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13)
- /* ldr r1, =0x80000403 */
+ /* ldr r1, =0x80000403 */
str r1, [r0]
ldr r1, [r0] /* delay until written */
@@ -140,121 +108,6 @@
orr r1, r1, #MDCNFG_DMCEN
str r1, [r0]
-
-#else /* NEW_SDRAM_INIT */
-
- /* configure the MEMCLKCFG register */
- ldr r1, =MEMCLKCFG
- ldr r2, =0x00010001
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
- /* set CSADRCFG[0] to data flash SRAM mode */
- ldr r1, =CSADRCFG0
- ldr r2, =0x00320809
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
- /* set CSADRCFG[1] to data flash SRAM mode */
- ldr r1, =CSADRCFG1
- ldr r2, =0x00320809
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
- /* set MSC 0 register for SRAM memory */
- ldr r1, =MSC0
- ldr r2, =0x11191119
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
- /* set CSADRCFG[2] to data flash SRAM mode */
- ldr r1, =CSADRCFG2
- ldr r2, =0x00320809
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
- /* set CSADRCFG[3] to VLIO mode */
- ldr r1, =CSADRCFG3
- ldr r2, =0x0032080B
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
- /* set MSC 1 register for VLIO memory */
- ldr r1, =MSC1
- ldr r2, =0x123C1119
- str r2, [r1] @ WRITE
- ldr r2, [r1] @ DELAY UNTIL WRITTEN
-
-#if 0
- /* This does not work in Zylonite. -SC */
- ldr r0, =0x15fffff0
- ldr r1, =0xb10b
- str r1, [r0]
- str r1, [r0, #4]
-#endif
-
- /* Configure ACCR Register */
- ldr r0, =ACCR @ ACCR
- ldr r1, =0x0180b108
- str r1, [r0]
- ldr r1, [r0]
-
- /* Configure MDCNFG Register */
- ldr r0, =MDCNFG @ MDCNFG
- ldr r1, =0x403
- str r1, [r0]
- ldr r1, [r0]
-
- /* Perform Resistive Compensation by configuring RCOMP register */
- ldr r1, =RCOMP @ RCOMP
- ldr r2, =0x000000ff
- str r2, [r1]
- ldr r2, [r1]
-
- /* Configure MDMRS Register for SDCS0 */
- ldr r1, =MDMRS @ MDMRS
- ldr r2, =0x60000023
- ldr r3, [r1]
- orr r2, r2, r3
- str r2, [r1]
- ldr r2, [r1]
-
- /* Configure MDMRS Register for SDCS1 */
- ldr r1, =MDMRS @ MDMRS
- ldr r2, =0xa0000023
- ldr r3, [r1]
- orr r2, r2, r3
- str r2, [r1]
- ldr r2, [r1]
-
- /* Configure MDREFR */
- ldr r1, =MDREFR @ MDREFR
- ldr r2, =0x00000006
- str r2, [r1]
- ldr r2, [r1]
-
- /* Configure EMPI */
- ldr r1, =EMPI @ EMPI
- ldr r2, =0x80000000
- str r2, [r1]
- ldr r2, [r1]
-
- /* Hardware DDR Read-Strobe Delay Calibration */
- ldr r0, =DDR_HCAL @ DDR_HCAL
- ldr r1, =0x803ffc07 @ the offset is correct? -SC
- str r1, [r0]
- wait #5
- ldr r1, [r0]
-
- /* Here we assume the hardware calibration alwasy be successful. -SC */
- /* Set DMCEN bit in MDCNFG Register */
- ldr r0, =MDCNFG @ MDCNFG
- ldr r1, [r0]
- orr r1, r1, #0x40000000 @ enable SDRAM for Normal Access
- str r1, [r0]
-
-#endif /* NEW_SDRAM_INIT */
-
#ifndef CFG_SKIP_DRAM_SCRUB
/* scrub/init SDRAM if enabled/present */
ldr r8, =CFG_DRAM_BASE /* base address of SDRAM (CFG_DRAM_BASE) */
@@ -290,96 +143,4 @@
mcr p14,0,r0,c10,c0,0 /* dcsr */
endlowlevel_init:
-
mov pc, lr
-
-
-/*
-@********************************************************************************
-@ DDR calibration
-@
-@ This function is used to calibrate DQS delay lines.
-@ Monahans supports three ways to do it. One is software
-@ calibration. Two is hardware calibration. Three is hybrid
-@ calibration.
-@
-@ TBD
-@ -SC
-ddr_calibration:
-
- @ Case 1: Write the correct delay value once
- @ Configure DDR_SCAL Register
- ldr r0, =DDR_SCAL @ DDR_SCAL
-q ldr r1, =0xaf2f2f2f
- str r1, [r0]
- ldr r1, [r0]
-*/
-/* @ Case 2: Software Calibration
- @ Write test pattern to memory
- ldr r5, =0x0faf0faf @ Data Pattern
- ldr r4, =0xa0000000 @ DDR ram
- str r5, [r4]
-
- mov r1, =0x0 @ delay count
- mov r6, =0x0
- mov r7, =0x0
-ddr_loop1:
- add r1, r1, =0x1
- cmp r1, =0xf
- ble end_loop
- mov r3, r1
- mov r0, r1, lsl #30
- orr r3, r3, r0
- mov r0, r1, lsl #22
- orr r3, r3, r0
- mov r0, r1, lsl #14
- orr r3, r3, r0
- orr r3, r3, =0x80000000
- ldr r2, =DDR_SCAL
- str r3, [r2]
-
- ldr r2, [r4]
- cmp r2, r5
- bne ddr_loop1
- mov r6, r1
-ddr_loop2:
- add r1, r1, =0x1
- cmp r1, =0xf
- ble end_loop
- mov r3, r1
- mov r0, r1, lsl #30
- orr r3, r3, r0
- mov r0, r1, lsl #22
- orr r3, r3, r0
- mov r0, r1, lsl #14
- orr r3, r3, r0
- orr r3, r3, =0x80000000
- ldr r2, =DDR_SCAL
- str r3, [r2]
-
- ldr r2, [r4]
- cmp r2, r5
- be ddr_loop2
- mov r7, r2
-
- add r3, r6, r7
- lsr r3, r3, =0x1
- mov r0, r1, lsl #30
- orr r3, r3, r0
- mov r0, r1, lsl #22
- orr r3, r3, r0
- mov r0, r1, lsl #14
- orr r3, r3, r0
- orr r3, r3, =0x80000000
- ldr r2, =DDR_SCAL
-
-end_loop:
-
- @ Case 3: Hardware Calibratoin
- ldr r0, =DDR_HCAL @ DDR_HCAL
- ldr r1, =0x803ffc07 @ the offset is correct? -SC
- str r1, [r0]
- wait #5
- ldr r1, [r0]
- mov pc, lr
-*/
diff --git a/board/delta/nand.c b/board/delta/nand.c
index c4df6e5..5d2cd65 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -293,11 +293,6 @@
{
unsigned long ndsr=0, event=0;
- /* mk@tbd set appropriate timeouts */
- /* if (state == FL_ERASING) */
- /* timeo = CFG_HZ * 400; */
- /* else */
- /* timeo = CFG_HZ * 20; */
if(state == FL_WRITING) {
event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
} else if(state == FL_ERASING) {
@@ -563,13 +558,12 @@
/* wait 10 us due to cmd buffer clear reset */
- /* wait(10); */
+ /* wait(10); */
nand->hwcontrol = dfc_hwcontrol;
-/* nand->dev_ready = dfc_device_ready; */
+/* nand->dev_ready = dfc_device_ready; */
nand->eccmode = NAND_ECC_SOFT;
- nand->chip_delay = NAND_DELAY_US;
nand->options = NAND_BUSWIDTH_16;
nand->waitfunc = dfc_wait;
nand->read_byte = dfc_read_byte;
diff --git a/board/dnp1110/dnp1110.c b/board/dnp1110/dnp1110.c
index 24c3e00..ab8e7be 100644
--- a/board/dnp1110/dnp1110.c
+++ b/board/dnp1110/dnp1110.c
@@ -24,8 +24,8 @@
#include <common.h>
#include <SA-1100.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -33,25 +33,21 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
/* arch number of DNP1110-Board */
gd->bd->bi_arch_number = MACH_TYPE_DNP1110;
- /* flash vpp on */
- PPDR |= 0x80; /* assumes LCD controller is off */
- PPSR |= 0x80;
+ /* flash vpp on */
+ PPDR |= 0x80; /* assumes LCD controller is off */
+ PPSR |= 0x80;
return 0;
}
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c
index fc48ed5..555475e 100644
--- a/board/eltec/bab7xx/bab7xx.c
+++ b/board/eltec/bab7xx/bab7xx.c
@@ -31,6 +31,8 @@
#include <ns87308.h>
#include <video_fb.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*---------------------------------------------------------------------------*/
/*
* Get Bus clock frequency
@@ -169,8 +171,6 @@
void after_reloc (ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*
* Jump to the main U-Boot board init code
*/
diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c
index a9dbeb2..108adb1 100644
--- a/board/eltec/elppc/elppc.c
+++ b/board/eltec/elppc/elppc.c
@@ -26,6 +26,8 @@
#include <mpc106.h>
#include <video_fb.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
int checkboard (void)
@@ -137,8 +139,6 @@
void after_reloc (ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*
* Jump to the main U-Boot board init code
*/
diff --git a/board/ep7312/ep7312.c b/board/ep7312/ep7312.c
index 11eab23..6968a5d 100644
--- a/board/ep7312/ep7312.c
+++ b/board/ep7312/ep7312.c
@@ -25,8 +25,7 @@
#include <common.h>
#include <clps7111.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -34,8 +33,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Activate LED flasher */
IO_LEDFLSH = 0x40;
@@ -50,8 +47,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c
index 4b2b07a..078df00 100644
--- a/board/esd/apc405/apc405.c
+++ b/board/esd/apc405/apc405.c
@@ -26,7 +26,7 @@
#include <command.h>
#include <malloc.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#if 0
#define FPGA_DEBUG
@@ -166,8 +166,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile unsigned short *fpga_mode =
(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
volatile unsigned short *fpga_ctrl2 =
@@ -301,8 +299,6 @@
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c
index 3aac3c6..dfead33 100644
--- a/board/esd/ar405/ar405.c
+++ b/board/esd/ar405/ar405.c
@@ -26,6 +26,8 @@
#include <asm/processor.h>
#include <command.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
extern void lxt971_no_sleep(void);
@@ -53,8 +55,6 @@
int board_early_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int index, len, i;
int status;
@@ -151,8 +151,6 @@
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int index;
int len;
char str[64];
diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c
index 2ced6cb..055a397 100644
--- a/board/esd/canbt/canbt.c
+++ b/board/esd/canbt/canbt.c
@@ -26,6 +26,7 @@
#include <asm/processor.h>
#include <command.h>
+DECLARE_GLOBAL_DATA_PTR;
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -50,8 +51,6 @@
int board_early_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long cntrl0Reg;
int index, len, i;
int status;
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
index e283a92..cb04710 100644
--- a/board/esd/cms700/cms700.c
+++ b/board/esd/cms700/cms700.c
@@ -26,10 +26,10 @@
#include <command.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
extern void lxt971_no_sleep(void);
-
/* fpga configuration data - not compressed, generated by bin2c */
const unsigned char fpgadata[] =
{
@@ -87,8 +87,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index 1a27ca0..36bf329 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -26,6 +26,8 @@
#include <command.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int board_early_init_f (void)
{
unsigned long cntrl0Reg;
@@ -74,7 +76,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned long cntrl0Reg;
/* adjust flash start and offset */
diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c
index 2ab9673..f803610 100644
--- a/board/esd/cpci405/cpci405.c
+++ b/board/esd/cpci405/cpci405.c
@@ -27,7 +27,8 @@
#include <malloc.h>
#include <net.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
+
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/
#if 0
#define FPGA_DEBUG
@@ -100,8 +101,6 @@
#endif
#ifdef FPGA_DEBUG
- DECLARE_GLOBAL_DATA_PTR;
-
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
@@ -126,8 +125,6 @@
if (status != 0) {
/* booting FPGA failed */
#ifndef FPGA_DEBUG
- DECLARE_GLOBAL_DATA_PTR;
-
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
@@ -268,7 +265,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned long cntrl0Reg;
/* adjust flash start and offset */
@@ -707,8 +703,6 @@
*/
int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd = gd->bd;
char *buf;
ulong crc;
diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c
index 52398b2..25c10e0 100644
--- a/board/esd/cpci750/mpsc.c
+++ b/board/esd/cpci750/mpsc.c
@@ -42,6 +42,8 @@
#include "../../Marvell/include/memory.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* Define this if you wish to use the MPSC as a register based UART.
* This will force the serial port to not use the SDMA engine at all.
*/
@@ -157,7 +159,6 @@
* global variables [josh] */
int mpsc_putchar_early (char ch)
{
- DECLARE_GLOBAL_DATA_PTR;
int mpsc = CHANNEL;
int temp =
GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP));
@@ -510,7 +511,6 @@
int galbrg_set_baudrate (int channel, int rate)
{
- DECLARE_GLOBAL_DATA_PTR;
int clock;
galbrg_disable (channel); /*ok */
diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c
index be176dc..bc84ef0 100644
--- a/board/esd/cpci750/mv_eth.c
+++ b/board/esd/cpci750/mv_eth.c
@@ -733,6 +733,7 @@
pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */
pkt_info.byte_cnt = dataSize;
pkt_info.buf_ptr = (unsigned int) dataPtr;
+ pkt_info.return_info = 0;
status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info);
if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) {
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index db545ef..6bdfc1d 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -45,6 +45,7 @@
#include "64360.h"
#include "mv_regs.h"
+DECLARE_GLOBAL_DATA_PTR;
#undef DEBUG
/* #define DEBUG */
@@ -250,8 +251,6 @@
/* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */
static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long spd_checksum;
uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c
index 44de052..ba32ac1 100644
--- a/board/esd/cpci750/serial.c
+++ b/board/esd/cpci750/serial.c
@@ -38,13 +38,12 @@
#include "../../Marvell/include/memory.h"
#include "serial.h"
-
#include "mpsc.h"
+DECLARE_GLOBAL_DATA_PTR;
+
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
mpsc_init (gd->baudrate);
return (0);
@@ -70,8 +69,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
}
diff --git a/board/esd/cpciiser4/cpciiser4.c b/board/esd/cpciiser4/cpciiser4.c
index 7bf7bb5..fcb8cbb 100644
--- a/board/esd/cpciiser4/cpciiser4.c
+++ b/board/esd/cpciiser4/cpciiser4.c
@@ -26,6 +26,8 @@
#include <asm/processor.h>
#include <command.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -55,8 +57,6 @@
int board_early_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int index, len, i;
volatile unsigned char dummy;
int status;
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
index fd51f7f..240ab78 100644
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -26,6 +26,7 @@
#include <command.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
/* fpga configuration data - not compressed, generated by bin2c */
const unsigned char fpgadata[] =
@@ -84,8 +85,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
index 26e8341..a019ce4 100644
--- a/board/esd/du405/du405.c
+++ b/board/esd/du405/du405.c
@@ -28,6 +28,8 @@
#include <405gp_i2c.h>
#include <command.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -55,8 +57,6 @@
int board_early_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int index, len, i;
int status;
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 99fd556..ea344c0 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -34,6 +34,8 @@
#include <pci.h>
#include <sm501.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_VIDEO_SM501
#define SWAP32(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
@@ -358,8 +360,6 @@
int cf_enable(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
volatile unsigned short *fpga_ctrl =
@@ -391,8 +391,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile unsigned short *fpga_ctrl =
(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
volatile unsigned short *lcd_contrast =
@@ -628,8 +626,6 @@
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
@@ -673,8 +669,6 @@
#ifdef CONFIG_IDE_RESET
void ide_set_reset(int on)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile unsigned short *fpga_mode =
(unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
volatile unsigned short *fpga_status =
@@ -788,8 +782,6 @@
*/
void video_get_info_str (int line_number, char *info)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char str[64];
char str2[64];
int i = getenv_r("serial#", str2, sizeof(str));
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
index 0c6771f..1e0accb 100644
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -26,10 +26,10 @@
#include <command.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
extern void lxt971_no_sleep(void);
-
int board_revision(void)
{
unsigned long osrl_reg;
@@ -110,8 +110,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
@@ -208,8 +206,6 @@
*/
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 4be4d7e..e5d2273 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -30,6 +30,7 @@
#include "pci405.h"
+DECLARE_GLOBAL_DATA_PTR;
/* Prototypes */
int gunzip(void *, int, unsigned char *, unsigned long *);
@@ -111,8 +112,6 @@
unsigned long fpga_done_state(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->board_type < 2) {
return FPGA_DONE_STATE_V11;
} else {
@@ -123,8 +122,6 @@
unsigned long fpga_init_state(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->board_type < 2) {
return FPGA_INIT_STATE_V11;
} else {
@@ -320,8 +317,6 @@
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c
index f9e4d43..7499671 100644
--- a/board/esd/pmc405/pmc405.c
+++ b/board/esd/pmc405/pmc405.c
@@ -29,10 +29,10 @@
#include <command.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
extern void lxt971_no_sleep(void);
-
/* fpga configuration data - not compressed, generated by bin2c */
const unsigned char fpgadata[] =
{
@@ -100,8 +100,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c
index bc5fa7c..8be552e 100644
--- a/board/esd/vom405/vom405.c
+++ b/board/esd/vom405/vom405.c
@@ -26,10 +26,10 @@
#include <command.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
extern void lxt971_no_sleep(void);
-
/* fpga configuration data - not compressed, generated by bin2c */
const unsigned char fpgadata[] =
{
@@ -81,8 +81,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* adjust flash start and offset */
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
gd->bd->bi_flashoffset = 0;
diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c
index 93c502c..08ed635 100644
--- a/board/etin/debris/debris.c
+++ b/board/etin/debris/debris.c
@@ -26,6 +26,8 @@
#include <pci.h>
#include <i2c.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int checkboard (void)
{
/*TODO: Check processor type */
@@ -170,8 +172,6 @@
int misc_init_r(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Write ethernet addr in NVRAM for VxWorks */
nvram_write(CFG_ENV_ADDR + CFG_NVRAM_VXWORKS_OFFS,
(char*)&gd->bd->bi_enetaddr[0], 6);
diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c
index dba3c11..eb58b5d 100644
--- a/board/etx094/etx094.c
+++ b/board/etx094/etx094.c
@@ -24,6 +24,8 @@
#include <common.h>
#include <mpc8xx.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
@@ -90,8 +92,6 @@
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char *s = getenv ("serial#");
char *e;
diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c
index 0008e5a..13abbb7 100644
--- a/board/evb4510/evb4510.c
+++ b/board/evb4510/evb4510.c
@@ -25,6 +25,8 @@
#include <asm/hardware.h>
#include <command.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_EVB4510
/* ------------------------------------------------------------------------- */
@@ -35,8 +37,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
icache_enable();
/* address for the kernel command line */
@@ -52,7 +52,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
#if CONFIG_NR_DRAM_BANKS == 2
diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c
index 6a9d164..ab59941 100644
--- a/board/evb64260/evb64260.c
+++ b/board/evb64260/evb64260.c
@@ -37,6 +37,9 @@
#include "mpsc.h"
#include "i2c.h"
#include "64260.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_ZUMA_V2
extern void zuma_mbox_init(void);
#endif
@@ -323,8 +326,6 @@
void
after_reloc(ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* check to see if we booted from the sram. If so, move things
* back to the way they should be. (we're running from main
* memory at this point now */
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
index ee623ca..98ac7f6 100644
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -32,6 +32,8 @@
#include <malloc.h>
#include "mpsc.h"
+DECLARE_GLOBAL_DATA_PTR;
+
int (*mpsc_putchar)(char ch) = mpsc_putchar_early;
static volatile unsigned int *rx_desc_base=NULL;
@@ -115,7 +117,6 @@
int
mpsc_putchar_early(char ch)
{
- DECLARE_GLOBAL_DATA_PTR;
int mpsc=CHANNEL;
int temp=GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
galmpsc_set_tcschar(mpsc,ch);
@@ -177,79 +178,82 @@
return 0;
}
-char
-mpsc_getchar(void)
+char mpsc_getchar (void)
{
- DECLARE_GLOBAL_DATA_PTR;
- static unsigned int done = 0;
- volatile char ch;
- unsigned int len=0, idx=0, temp;
+ static unsigned int done = 0;
+ volatile char ch;
+ unsigned int len = 0, idx = 0, temp;
- volatile unsigned int *p;
+ volatile unsigned int *p;
- do {
- p=&rx_desc_base[rx_desc_index*8];
+ do {
+ p = &rx_desc_base[rx_desc_index * 8];
- INVALIDATE_DCACHE(&p[0], &p[1]);
- /* Wait for character */
- while (p[1] & DESC_OWNER){
- udelay(100);
- INVALIDATE_DCACHE(&p[0], &p[1]);
- }
+ INVALIDATE_DCACHE (&p[0], &p[1]);
+ /* Wait for character */
+ while (p[1] & DESC_OWNER) {
+ udelay (100);
+ INVALIDATE_DCACHE (&p[0], &p[1]);
+ }
- /* Handle error case */
- if (p[1] & (1<<15)) {
- printf("oops, error: %08x\n", p[1]);
+ /* Handle error case */
+ if (p[1] & (1 << 15)) {
+ printf ("oops, error: %08x\n", p[1]);
- temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,CHANNEL,GALMPSC_REG_GAP);
- temp |= (1 << 23);
- GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2, CHANNEL,GALMPSC_REG_GAP, temp);
+ temp = GTREGREAD_MIRROR (GALMPSC_CHANNELREG_2,
+ CHANNEL, GALMPSC_REG_GAP);
+ temp |= (1 << 23);
+ GT_REG_WRITE_MIRROR (GALMPSC_CHANNELREG_2, CHANNEL,
+ GALMPSC_REG_GAP, temp);
- /* Can't poll on abort bit, so we just wait. */
- udelay(100);
+ /* Can't poll on abort bit, so we just wait. */
+ udelay (100);
- galsdma_enable_rx();
- }
+ galsdma_enable_rx ();
+ }
- /* Number of bytes left in this descriptor */
- len = p[0] & 0xffff;
+ /* Number of bytes left in this descriptor */
+ len = p[0] & 0xffff;
- if (len) {
- /* Where to look */
- idx = 5;
- if (done > 3) idx = 4;
- if (done > 7) idx = 7;
- if (done > 11) idx = 6;
+ if (len) {
+ /* Where to look */
+ idx = 5;
+ if (done > 3)
+ idx = 4;
+ if (done > 7)
+ idx = 7;
+ if (done > 11)
+ idx = 6;
- INVALIDATE_DCACHE(&p[idx], &p[idx+1]);
- ch = p[idx] & 0xff;
- done++;
- }
+ INVALIDATE_DCACHE (&p[idx], &p[idx + 1]);
+ ch = p[idx] & 0xff;
+ done++;
+ }
- if (done < len) {
- /* this descriptor has more bytes still
- * shift down the char we just read, and leave the
- * buffer in place for the next time around
- */
- p[idx] = p[idx] >> 8;
- FLUSH_DCACHE(&p[idx], &p[idx+1]);
- }
+ if (done < len) {
+ /* this descriptor has more bytes still
+ * shift down the char we just read, and leave the
+ * buffer in place for the next time around
+ */
+ p[idx] = p[idx] >> 8;
+ FLUSH_DCACHE (&p[idx], &p[idx + 1]);
+ }
- if (done == len) {
- /* nothing left in this descriptor.
- * go to next one
- */
- p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
- p[0] = 0x00100000;
- FLUSH_DCACHE(&p[0], &p[1]);
- /* Next descriptor */
- rx_desc_index = (rx_desc_index + 1) % RX_DESC;
- done = 0;
- }
- } while (len==0); /* galileo bug.. len might be zero */
+ if (done == len) {
+ /* nothing left in this descriptor.
+ * go to next one
+ */
+ p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST;
+ p[0] = 0x00100000;
+ FLUSH_DCACHE (&p[0], &p[1]);
+ /* Next descriptor */
+ rx_desc_index = (rx_desc_index + 1) % RX_DESC;
+ done = 0;
+ }
+ } while (len == 0); /* galileo bug.. len might be zero */
- return ch;
+ return ch;
}
int
@@ -266,8 +270,6 @@
int
mpsc_init(int baud)
{
- DECLARE_GLOBAL_DATA_PTR;
-
memset(MIRROR_HACK, 0, sizeof(struct _tag_mirror_hack));
MIRROR_HACK->GALMPSC_ROUTING_REGISTER_M=0x3fffffff;
@@ -382,7 +384,6 @@
int
galbrg_set_baudrate(int channel, int rate)
{
- DECLARE_GLOBAL_DATA_PTR;
int clock;
galbrg_disable(channel);
@@ -410,7 +411,6 @@
static int
galbrg_set_CDV(int channel, int value)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
@@ -424,7 +424,6 @@
static int
galbrg_enable(int channel)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
@@ -437,7 +436,6 @@
static int
galbrg_disable(int channel)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP);
@@ -450,7 +448,6 @@
static int
galbrg_set_clksrc(int channel, int value)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP);
@@ -583,7 +580,6 @@
static int
galmpsc_connect(int channel, int connect)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR_G(GALMPSC_ROUTING_REGISTER);
@@ -629,7 +625,6 @@
static int
galmpsc_route_rx_clock(int channel, int brg)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR_G(GALMPSC_RxC_ROUTE);
@@ -647,7 +642,6 @@
static int
galmpsc_route_tx_clock(int channel, int brg)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR_G(GALMPSC_TxC_ROUTE);
@@ -688,7 +682,6 @@
static int
galmpsc_config_channel_regs(int mpsc)
{
- DECLARE_GLOBAL_DATA_PTR;
GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, 0);
GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, 0);
GT_REG_WRITE(GALMPSC_CHANNELREG_3+(mpsc*GALMPSC_REG_GAP), 1);
@@ -709,7 +702,6 @@
static int
galmpsc_set_brkcnt(int mpsc, int value)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
@@ -723,7 +715,6 @@
static int
galmpsc_set_tcschar(int mpsc, int value)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP);
@@ -737,7 +728,6 @@
static int
galmpsc_set_char_length(int mpsc, int value)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
@@ -751,7 +741,6 @@
static int
galmpsc_set_stop_bit_length(int mpsc, int value)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP);
@@ -764,7 +753,6 @@
static int
galmpsc_set_parity(int mpsc, int value)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int temp;
temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
@@ -784,7 +772,6 @@
static int
galmpsc_enter_hunt(int mpsc)
{
- DECLARE_GLOBAL_DATA_PTR;
int temp;
temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP);
@@ -802,7 +789,6 @@
static int
galmpsc_shutdown(int mpsc)
{
- DECLARE_GLOBAL_DATA_PTR;
#if 0
unsigned int temp;
diff --git a/board/evb64260/sdram_init.c b/board/evb64260/sdram_init.c
index 8d63c6f..fae6d10 100644
--- a/board/evb64260/sdram_init.c
+++ b/board/evb64260/sdram_init.c
@@ -35,6 +35,8 @@
#include "i2c.h"
#include "64260.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* #define DEBUG */
#define MAP_PCI
@@ -199,7 +201,6 @@
* the array which is passed in with the relevant information */
static int check_dimm (uchar slot, sdram_info_t * info)
{
- DECLARE_GLOBAL_DATA_PTR;
uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR;
int ret;
uchar rows, cols, sdram_banks, supp_cal, width, cal_val;
diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c
index d9c7a15..191445c 100644
--- a/board/evb64260/serial.c
+++ b/board/evb64260/serial.c
@@ -39,6 +39,8 @@
#include "mpsc.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1,
(NS16550_t) CFG_NS16550_COM2 };
@@ -48,8 +50,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
#endif
@@ -90,8 +90,6 @@
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
galbrg_set_baudrate(CONFIG_MPSC_PORT, gd->baudrate);
}
@@ -99,8 +97,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
#ifdef CFG_INIT_CHAN1
@@ -137,8 +133,6 @@
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
#ifdef CFG_INIT_CHAN1
diff --git a/board/ezkit533/ezkit533.c b/board/ezkit533/ezkit533.c
index f8ee900..8d6c8de 100644
--- a/board/ezkit533/ezkit533.c
+++ b/board/ezkit533/ezkit533.c
@@ -30,6 +30,8 @@
#include "psd4256.h"
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
int checkboard(void)
{
printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28);
@@ -41,7 +43,6 @@
long int initdram(int board_type)
{
- DECLARE_GLOBAL_DATA_PTR;
#ifdef DEBUG
int brate;
char *tmp = getenv("baudrate");
diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c
index 261e894..829b597 100644
--- a/board/gcplus/gcplus.c
+++ b/board/gcplus/gcplus.c
@@ -26,7 +26,8 @@
#include <common.h>
#include <SA-1100.h>
-/* ------------------------------------------------------------------------- */
+
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -35,8 +36,6 @@
int
board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_arch_number = MACH_TYPE_GRAPHICSCLIENT;
gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */
@@ -62,8 +61,6 @@
int
dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index 37788d5..2ba7e0e 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -32,6 +32,8 @@
#include <command.h>
#include "fpga.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#if (CONFIG_FPGA)
#if 0
@@ -189,8 +191,6 @@
*/
int gen860t_init_fpga (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index b7a1b56..eb73221 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -30,6 +30,8 @@
#include "fpga.h"
#include "ioport.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
@@ -126,8 +128,6 @@
*/
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char *s;
char buf[64];
int i;
@@ -305,5 +305,3 @@
return 0; /* No hotkeys supported */
}
#endif
-
-/* vim: set ts=4 sw=4 tw=78 : */
diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c
index e95d9ee..a523db1 100644
--- a/board/hermes/hermes.c
+++ b/board/hermes/hermes.c
@@ -32,6 +32,8 @@
# define SHOW_BOOT_PROGRESS(arg)
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
@@ -105,8 +107,6 @@
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char *s = getenv ("serial#");
char *e;
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
index 0596fa4..6868f26 100644
--- a/board/hymod/bsp.c
+++ b/board/hymod/bsp.c
@@ -28,6 +28,8 @@
#include <net.h>
#include <asm/iopin_8260.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*-----------------------------------------------------------------------
* Board Special Commands: FPGA load/store, EEPROM erase
*/
@@ -75,8 +77,6 @@
int
fpga_load (int mezz, uchar *addr, ulong size)
{
- DECLARE_GLOBAL_DATA_PTR;
-
hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
xlx_info_t *fp;
xlx_iopins_t *fpgaio;
diff --git a/board/hymod/env.c b/board/hymod/env.c
index f9e1421..062553b 100644
--- a/board/hymod/env.c
+++ b/board/hymod/env.c
@@ -23,6 +23,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* imports from fetch.c */
extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
@@ -32,8 +34,6 @@
static int
env_callback (uchar *name, uchar *value)
{
- DECLARE_GLOBAL_DATA_PTR;
-
hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
char ov[CFG_CBSIZE], nv[CFG_CBSIZE], *p, *q, *nn, c, *curver, *newver;
int override = 1, append = 0, remove = 0, nnl, ovl, nvl;
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
index dea0a70..5e98e9e 100644
--- a/board/hymod/hymod.c
+++ b/board/hymod/hymod.c
@@ -30,6 +30,8 @@
#include <i2c.h>
#include <asm/iopin_8260.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/* imports from eeprom.c */
@@ -424,8 +426,6 @@
int
last_stage_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
int rc;
diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c
index 081ef65..7b9a83d 100644
--- a/board/ids8247/ids8247.c
+++ b/board/ids8247/ids8247.c
@@ -25,6 +25,8 @@
#include <ioports.h>
#include <mpc8260.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* I/O Port configuration table
*
@@ -295,8 +297,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_flashstart = 0xff800000;
}
diff --git a/board/impa7/impa7.c b/board/impa7/impa7.c
index e496923..3230dd4 100644
--- a/board/impa7/impa7.c
+++ b/board/impa7/impa7.c
@@ -25,6 +25,8 @@
#include <common.h>
#include <clps7111.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
@@ -34,8 +36,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Activate LED flasher */
IO_LEDFLSH = 0x40;
@@ -50,8 +50,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index ae5402e..7f8f47c 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -27,6 +27,8 @@
#include <asm/arch/pxa-regs.h>
#include <asm/mach-types.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
#else
@@ -95,8 +97,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -116,8 +116,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c
index d4f61d6..e659907 100644
--- a/board/integratorap/integratorap.c
+++ b/board/integratorap/integratorap.c
@@ -39,6 +39,8 @@
#include <pci.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
void flash__init (void);
void ether__init (void);
void peripheral_power_enable (void);
@@ -65,8 +67,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of Integrator Board */
gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR;
@@ -480,8 +480,6 @@
******************************/
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/integratorcp/integratorcp.c b/board/integratorcp/integratorcp.c
index 216876b..d6d6e13 100644
--- a/board/integratorcp/integratorcp.c
+++ b/board/integratorcp/integratorcp.c
@@ -35,6 +35,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void flash__init (void);
void ether__init (void);
void peripheral_power_enable (void);
@@ -54,8 +56,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of Integrator Board */
gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
@@ -105,8 +105,6 @@
******************************/
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c
index c04626a..aa96591 100644
--- a/board/ixdp425/ixdp425.c
+++ b/board/ixdp425/ixdp425.c
@@ -28,11 +28,7 @@
#include <asm/arch/ixp425.h>
#include <common.h>
-/* ------------------------------------------------------------------------- */
-
-
-/* local prototypes */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -49,8 +45,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of IXDP */
gd->bd->bi_arch_number = MACH_TYPE_IXDP425;
@@ -64,8 +58,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c
index 4a7cf77..ec51dca 100644
--- a/board/kb9202/kb9202.c
+++ b/board/kb9202/kb9202.c
@@ -31,7 +31,8 @@
#include <at91rm9200_net.h>
#include <lxt971a.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Miscelaneous platform dependent initialisations
*/
@@ -42,8 +43,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Enable Ctrlc */
console_init_f ();
@@ -60,8 +59,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
return 0;
diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c
index e621c43..4e377a1 100644
--- a/board/kup/kup4k/kup4k.c
+++ b/board/kup/kup4k/kup4k.c
@@ -29,6 +29,8 @@
#include "s1d13706.h"
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#undef DEBUG
#ifdef DEBUG
# define debugk(fmt,args...) printf(fmt ,##args)
@@ -44,10 +46,6 @@
/* ------------------------------------------------------------------------- */
-#if 0
-static long int dram_size (long int, long int *, long int);
-#endif
-
#ifdef CONFIG_KUP4K_LOGO
void lcd_logo(bd_t *bd);
#endif
@@ -235,62 +233,8 @@
/* ------------------------------------------------------------------------- */
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-#if 0
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- volatile long int *addr;
- ulong cnt, val;
- ulong save[32]; /* to make test non-destructive */
- unsigned char i = 0;
-
- memctl->memc_mamr = mamr_value;
-
- for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
- addr = base + cnt; /* pointer arith! */
-
- save[i++] = *addr;
- *addr = ~cnt;
- }
-
- /* write 0 to base address */
- addr = base;
- save[i] = *addr;
- *addr = 0;
-
- /* check at base address */
- if ((val = *addr) != 0) {
- *addr = save[i];
- return (0);
- }
-
- for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
-
- val = *addr;
- *addr = save[--i];
-
- if (val != (~cnt)) {
- return (cnt * sizeof (long));
- }
- }
- return (maxsize);
-}
-#endif
-
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#ifdef CONFIG_STATUS_LED
volatile immap_t *immap = (immap_t *) CFG_IMMR;
#endif
diff --git a/board/lart/lart.c b/board/lart/lart.c
index 66b730d..8d534c8 100644
--- a/board/lart/lart.c
+++ b/board/lart/lart.c
@@ -24,6 +24,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
@@ -33,8 +35,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -49,7 +49,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
bd->bi_dram[0].start = PHYS_SDRAM_1;
diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c
index 95634ac..14fd28f 100644
--- a/board/logodl/logodl.c
+++ b/board/logodl/logodl.c
@@ -25,6 +25,8 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/**
* board_init: - setup some data structures
*
@@ -33,8 +35,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -57,8 +57,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
index 4c373ee..e12bbf0 100644
--- a/board/lpd7a40x/lpd7a40x.c
+++ b/board/lpd7a40x/lpd7a40x.c
@@ -37,14 +37,14 @@
#include <lpd7a400_cpld.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Miscellaneous platform dependent initialisations
*/
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* set up the I/O ports */
/* enable flash programming */
@@ -74,8 +74,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c
index e618ab9..5829170 100644
--- a/board/lubbock/lubbock.c
+++ b/board/lubbock/lubbock.c
@@ -27,8 +27,7 @@
#include <common.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -36,8 +35,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -60,8 +57,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index a174b57..9e8ea2d 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -45,6 +45,8 @@
#include <linux/types.h>
#include <linux/string.h> /* for strdup */
+DECLARE_GLOBAL_DATA_PTR;
+
/*------------------------ Local prototypes ---------------------------*/
static long int dram_size (long int, long int *, long int);
static void kbd_init (void);
@@ -455,8 +457,6 @@
***********************************************************************/
int board_postclk_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
kbd_init();
#ifdef CONFIG_MODEM_SUPPORT
@@ -471,15 +471,11 @@
struct serial_device * default_serial_console (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device;
}
static void kbd_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uchar kbd_data[KEYBD_DATALEN];
uchar tmp_data[KEYBD_DATALEN];
uchar val, errcd;
@@ -571,8 +567,6 @@
***********************************************************************/
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uchar kbd_data[KEYBD_DATALEN];
char keybd_env[2 * KEYBD_DATALEN + 1];
uchar kbd_init_status = gd->kbd_status >> 8;
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index d1c99fd..456411d 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -30,6 +30,8 @@
#include "mt48lc8m32b2-6-7.h"
+DECLARE_GLOBAL_DATA_PTR;
+
extern flash_info_t flash_info[]; /* FLASH chips info */
ulong flash_get_size (ulong base, int banknum);
@@ -190,8 +192,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*
* Adjust flash start and offset to detected values
*/
diff --git a/board/ml2/serial.c b/board/ml2/serial.c
index 92baba9..74687f1 100644
--- a/board/ml2/serial.c
+++ b/board/ml2/serial.c
@@ -29,70 +29,59 @@
#include <ns16550.h>
#endif
-#if 0
-#include "serial.h"
-#endif
+DECLARE_GLOBAL_DATA_PTR;
#if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2)
const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1,
- (NS16550_t) CFG_NS16550_COM2 };
+ (NS16550_t) CFG_NS16550_COM2
+};
#endif
-int
-serial_init (void)
+int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
- int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+ int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
#ifdef CFG_INIT_CHAN1
- (void)NS16550_init(COM_PORTS[0], clock_divisor);
+ (void) NS16550_init (COM_PORTS[0], clock_divisor);
#endif
#ifdef CFG_INIT_CHAN2
- (void)NS16550_init(COM_PORTS[1], clock_divisor);
+ (void) NS16550_init (COM_PORTS[1], clock_divisor);
#endif
- return 0;
+ return 0;
}
-void
-serial_putc(const char c)
+void serial_putc (const char c)
{
- if (c == '\n')
- NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r');
+ if (c == '\n')
+ NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r');
- NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c);
+ NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c);
}
-int
-serial_getc(void)
+int serial_getc (void)
{
- return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]);
}
-int
-serial_tstc(void)
+int serial_tstc (void)
{
- return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]);
+ return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]);
}
-void
-serial_setbrg (void)
+void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
- int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
+ int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate;
#ifdef CFG_INIT_CHAN1
- NS16550_reinit(COM_PORTS[0], clock_divisor);
+ NS16550_reinit (COM_PORTS[0], clock_divisor);
#endif
#ifdef CFG_INIT_CHAN2
- NS16550_reinit(COM_PORTS[1], clock_divisor);
+ NS16550_reinit (COM_PORTS[1], clock_divisor);
#endif
}
-void
-serial_puts (const char *s)
+void serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
@@ -100,32 +89,27 @@
}
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-void
-kgdb_serial_init(void)
+void kgdb_serial_init (void)
{
}
-void
-putDebugChar (int c)
+void putDebugChar (int c)
{
serial_putc (c);
}
-void
-putDebugStr (const char *str)
+void putDebugStr (const char *str)
{
serial_puts (str);
}
-int
-getDebugChar (void)
+int getDebugChar (void)
{
- return serial_getc();
+ return serial_getc ();
}
-void
-kgdb_interruptible (int yes)
+void kgdb_interruptible (int yes)
{
return;
}
-#endif /* CFG_CMD_KGDB */
+#endif /* CFG_CMD_KGDB */
diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c
index 448c623..4544069 100644
--- a/board/modnet50/modnet50.c
+++ b/board/modnet50/modnet50.c
@@ -24,8 +24,7 @@
#include <common.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -33,7 +32,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
/* address for the kernel command line */
gd->bd->bi_boot_params = 0x800;
return 0;
@@ -41,7 +39,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
if (CONFIG_NR_DRAM_BANKS == 2) {
diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c
index e75be1e..486d44c 100644
--- a/board/mp2usb/mp2usb.c
+++ b/board/mp2usb/mp2usb.c
@@ -31,15 +31,14 @@
#include <dm9161.h>
#include <asm/mach-types.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Miscelaneous platform dependent initialisations
*/
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Enable Ctrlc */
console_init_f ();
@@ -56,8 +55,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM;
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
return 0;
diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c
index 505acbc..9841298 100644
--- a/board/mpc8349ads/mpc8349ads.c
+++ b/board/mpc8349ads/mpc8349ads.c
@@ -64,7 +64,7 @@
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
- msize = spd_sdram(NULL);
+ msize = spd_sdram();
#else
msize = fixed_sdram();
#endif
diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c
index c559424..319e35c 100644
--- a/board/mpc8349ads/pci.c
+++ b/board/mpc8349ads/pci.c
@@ -26,6 +26,8 @@
#include <asm/mpc8349_pci.h>
#include <i2c.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_PCI
/* System RAM mapped to PCI space */
@@ -127,7 +129,6 @@
void
pci_init_board(void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t * immr;
volatile clk8349_t * clk;
volatile law8349_t * pci_law;
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index b331d6e..06d021a 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -42,6 +42,9 @@
#include "../mip405/mip405.h"
#include <405gp_pci.h>
#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_PATI)
#define FIRM_START 0xFFF00000
#endif
@@ -584,7 +587,6 @@
void video_get_info_str (int line_number, char *info)
{
/* init video info strings for graphic console */
- DECLARE_GLOBAL_DATA_PTR;
PPC405_SYS_INFO sys_info;
char rev;
int i,boot;
diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c
index 2c77d37..ff1190a 100644
--- a/board/mpl/common/memtst.c
+++ b/board/mpl/common/memtst.c
@@ -50,13 +50,15 @@
#include <asm/processor.h>
#include <405gp_i2c.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define FALSE 0
#define TRUE 1
-#define TEST_QUIET 8
+#define TEST_QUIET 8
#define TEST_SHOW_PROG 4
#define TEST_SHOW_ERR 2
-#define TEST_SHOW_ALL 1
+#define TEST_SHOW_ALL 1
#define TESTPAT1 0xAA55AA55
#define TESTPAT2 0x55AA55AA
@@ -468,7 +470,6 @@
void mem_test_reloc(void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned long addr;
int i;
for (i=0; i< TEST_STAGES; i++) {
diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c
index 692930b..bde14be 100644
--- a/board/mpl/common/pci.c
+++ b/board/mpl/common/pci.c
@@ -32,7 +32,7 @@
#ifdef CONFIG_405GP
#ifdef CONFIG_PCI
-#undef DEBUG
+DECLARE_GLOBAL_DATA_PTR;
#include "piix4_pci.h"
#include "pci_parts.h"
@@ -94,7 +94,6 @@
static void reloc_pci_cfg_table(struct pci_config_table *table)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned long addr;
for (; table && table->vendor; table++) {
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 9c469b0..34f3289 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -70,6 +70,9 @@
#include "../common/common_util.h"
#include <i2c.h>
#include <rtc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
extern block_dev_desc_t * scsi_get_dev(int dev);
extern block_dev_desc_t * ide_get_dev(int dev);
@@ -189,8 +192,6 @@
void SDRAM_err (const char *s)
{
#ifndef SDRAM_DEBUG
- DECLARE_GLOBAL_DATA_PTR;
-
(void) get_clocks ();
gd->baudrate = 9600;
serial_init ();
@@ -241,8 +242,6 @@
int init_sdram (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long tmp, baseaddr;
unsigned short i;
unsigned char trp_clocks,
@@ -681,7 +680,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
/* adjust flash start and size as well as the offset */
gd->bd->bi_flashstart=0-flash_info[0].size;
gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index a398362..3828608 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -31,6 +31,8 @@
#include "../common/isa.h"
#include "../common/common_util.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#undef SDRAM_DEBUG
#define FALSE 0
@@ -134,8 +136,6 @@
void SDRAM_err (const char *s)
{
#ifndef SDRAM_DEBUG
- DECLARE_GLOBAL_DATA_PTR;
-
(void) get_clocks ();
gd->baudrate = 9600;
serial_init ();
@@ -191,9 +191,6 @@
trc_clocks, tctp_clocks;
unsigned char cal_index, cal_val, spd_version, spd_chksum;
unsigned char buf[8];
-#ifdef SDRAM_DEBUG
- DECLARE_GLOBAL_DATA_PTR;
-#endif
/* set up the config port */
mtdcr (ebccfga, pb7ap);
mtdcr (ebccfgd, CONFIG_PORT_AP);
@@ -613,8 +610,6 @@
long int initdram (int board_type)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long bank_reg[4], tmp, bank_size;
int i, ds;
unsigned long TotalSize;
@@ -666,7 +661,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
/* adjust flash start and size as well as the offset */
gd->bd->bi_flashstart=0-flash_info[0].size;
gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN;
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index ffdba5d..0d2003d 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -32,7 +32,7 @@
#include "vcma9.h"
#include "../common/common_util.h"
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#define FCLK_SPEED 1
@@ -71,7 +71,6 @@
int board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
@@ -275,8 +274,6 @@
int dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = Get_SDRAM_ChipSize() * Get_SDRAM_ChipNr();
diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c
index 20a551d..ee8f3e3 100644
--- a/board/mvblue/mvblue.c
+++ b/board/mvblue/mvblue.c
@@ -14,6 +14,8 @@
#include <pci.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
u32 get_BoardType (void);
#define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \
@@ -50,7 +52,6 @@
}
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong busfreq = get_bus_freq (0);
char buf[32];
u32 BoardType = get_BoardType ();
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index 5c33ba3..913f95c 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -27,7 +27,7 @@
/*#include <mc9328.h>*/
#include <asm/arch/imx-regs.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#define FCLK_SPEED 1
@@ -55,10 +55,11 @@
#if 0
-static inline void delay (unsigned long loops) {
+static inline void delay (unsigned long loops)
+{
__asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
+ "subs %0, %1, #1\n"
+ "bne 1b":"=r" (loops):"0" (loops));
}
#endif
@@ -67,62 +68,58 @@
* Miscellaneous platform dependent initialisations
*/
-void SetAsynchMode(void) {
- __asm__ (
- "mrc p15,0,r0,c1,c0,0 \n"
- "mov r2, #0xC0000000 \n"
- "orr r0,r2,r0 \n"
- "mcr p15,0,r0,c1,c0,0 \n"
- );
+void SetAsynchMode (void)
+{
+ __asm__ ("mrc p15,0,r0,c1,c0,0 \n"
+ "mov r2, #0xC0000000 \n"
+ "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n");
}
static u32 mc9328sid;
-int board_init (void) {
+int board_init (void)
+{
+ volatile unsigned int tmp;
- DECLARE_GLOBAL_DATA_PTR;
+ mc9328sid = SIDR;
- volatile unsigned int tmp;
+ GPCR = 0x000003AB; /* I/O pad driving strength */
- mc9328sid = SIDR;
-
- GPCR = 0x000003AB; /* I/O pad driving strength */
-
-/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
+ /* MX1_CS1U = 0x00000A00; *//* SRAM initialization */
/* MX1_CS1L = 0x11110601; */
- MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
+ MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
* BCLK divider to 2 (i.e. BCLK to 48 MHz)
*/
- CSCR = 0xAF000403;
+ CSCR = 0xAF000403;
- CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */
- CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */
+ CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */
+ CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */
/* setup cs4 for cs8900 ethernet */
- CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */
- CS4L = 0x00001501;
+ CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */
+ CS4L = 0x00001501;
- GIUS(0) &= 0xFF3FFFFF;
- GPR(0) &= 0xFF3FFFFF;
+ GIUS (0) &= 0xFF3FFFFF;
+ GPR (0) &= 0xFF3FFFFF;
- tmp = *(unsigned int *)(0x1500000C);
- tmp = *(unsigned int *)(0x1500000C);
+ tmp = *(unsigned int *) (0x1500000C);
+ tmp = *(unsigned int *) (0x1500000C);
- SetAsynchMode();
+ SetAsynchMode ();
gd->bd->bi_arch_number = MACH_TYPE_MX1ADS;
- gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */
+ gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */
- icache_enable();
- dcache_enable();
+ icache_enable ();
+ dcache_enable ();
/* set PERCLKs */
- PCDR = 0x00000055; /* set PERCLKS */
+ PCDR = 0x00000055; /* set PERCLKS */
/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
* PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
@@ -135,34 +132,38 @@
return 0;
}
-int board_late_init(void) {
+int board_late_init (void)
+{
- setenv("stdout", "serial");
- setenv("stderr", "serial");
+ setenv ("stdout", "serial");
+ setenv ("stderr", "serial");
- switch (mc9328sid) {
- case 0x0005901d :
- printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid);
- break;
- case 0x04d4c01d :
- printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid);
- break;
- case 0x00d4c01d :
- printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid);
- break;
+ switch (mc9328sid) {
+ case 0x0005901d:
+ printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",
+ mc9328sid);
+ break;
+ case 0x04d4c01d:
+ printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",
+ mc9328sid);
+ break;
+ case 0x00d4c01d:
+ printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",
+ mc9328sid);
+ break;
- default :
- printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid);
- break;
+ default:
+ printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",
+ mc9328sid);
+ break;
}
return 0;
}
-int dram_init (void) {
- DECLARE_GLOBAL_DATA_PTR;
-
+int dram_init (void)
+{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
}
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
index 9e7a06c..1c026f0 100644
--- a/board/mx1fs2/mx1fs2.c
+++ b/board/mx1fs2/mx1fs2.c
@@ -19,9 +19,10 @@
*/
#include <common.h>
-
#include <asm/arch/imx-regs.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
extern void imx_gpio_mode(int gpio_mode);
@@ -79,8 +80,6 @@
int
board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_arch_number = MACH_TYPE_MX1FS2;
gd->bd->bi_boot_params = 0x08000100;
serial_init();
@@ -91,8 +90,6 @@
int
dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#if ( CONFIG_NR_DRAM_BANKS > 0 )
gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
diff --git a/board/nc650/flash.c b/board/nc650/flash.c
index ce2f83b..8d7c172 100644
--- a/board/nc650/flash.c
+++ b/board/nc650/flash.c
@@ -32,6 +32,8 @@
#include <common.h>
#include <mpc8xx.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
#define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
OR_SCY_2_CLK | OR_EHTR | OR_BI)
@@ -95,8 +97,6 @@
#ifdef CFG_OR_TIMING_FLASH_AT_50MHZ
int scy, trlx, flash_or_timing, clk_diff;
- DECLARE_GLOBAL_DATA_PTR;
-
scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
trlx = OR_TRLX;
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
index 62615e5..4b7eba1 100644
--- a/board/netstar/netstar.c
+++ b/board/netstar/netstar.c
@@ -22,10 +22,10 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of NetStar board */
/* TODO: use define from asm/mach-types.h */
gd->bd->bi_arch_number = 692;
@@ -38,8 +38,6 @@
int dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c
index ea00d5a..1dd348a 100644
--- a/board/ns9750dev/ns9750dev.c
+++ b/board/ns9750dev/ns9750dev.c
@@ -41,6 +41,8 @@
# include <./ns9750_bbus.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
void flash__init( void );
void ether__init( void );
@@ -60,8 +62,6 @@
int board_init( void )
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Active BBUS modules */
*get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0;
@@ -114,8 +114,6 @@
******************************/
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c
index 65d45c1..4a426ec 100644
--- a/board/nx823/nx823.c
+++ b/board/nx823/nx823.c
@@ -28,12 +28,10 @@
#include <malloc.h>
#include <mpc8xx.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
static long int dram_size (long int, long int *, long int);
-/* ------------------------------------------------------------------------- */
-
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] = {
@@ -366,8 +364,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char tmp[50];
u_char *e = gd->bd->bi_enetaddr;
@@ -387,8 +383,6 @@
void load_sernum_ethaddr (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
bd_t *bd = gd->bd;
diff --git a/board/omap1510inn/omap1510innovator.c b/board/omap1510inn/omap1510innovator.c
index f037f42..8941209 100644
--- a/board/omap1510inn/omap1510innovator.c
+++ b/board/omap1510inn/omap1510innovator.c
@@ -31,6 +31,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static void flash__init (void);
static void ether__init (void);
@@ -47,8 +49,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of OMAP 1510-Board */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
@@ -122,8 +122,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c
index 7842518..8dbe686 100644
--- a/board/omap1610inn/omap1610innovator.c
+++ b/board/omap1610inn/omap1610innovator.c
@@ -36,6 +36,8 @@
#include <./configs/omap1510.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_CS_AUTOBOOT
unsigned long omap_flash_base;
#endif
@@ -60,8 +62,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (machine_is_omap_h2())
gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2;
else if (machine_is_omap_innovator())
@@ -153,8 +153,6 @@
******************************/
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c
index 2387176..f7f75e0 100644
--- a/board/omap2420h4/omap2420h4.c
+++ b/board/omap2420h4/omap2420h4.c
@@ -36,7 +36,9 @@
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
#endif
- void wait_for_command_complete(unsigned int wd_base);
+DECLARE_GLOBAL_DATA_PTR;
+
+void wait_for_command_complete(unsigned int wd_base);
/*******************************************************
* Routine: delay
@@ -54,8 +56,6 @@
*****************************************/
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gpmc_init(); /* in SRAM or SDRM, finish GPMC */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */
@@ -195,7 +195,6 @@
**********************************************/
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned int size0=0,size1=0;
u32 mtype, btype, rev, cpu;
u8 chg_on = 0x5; /* enable charge of back up battery */
diff --git a/board/omap5912osk/omap5912osk.c b/board/omap5912osk/omap5912osk.c
index 1faa084..e9e6b0e 100644
--- a/board/omap5912osk/omap5912osk.c
+++ b/board/omap5912osk/omap5912osk.c
@@ -38,6 +38,8 @@
#include <./configs/omap1510.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
void flash__init (void);
void ether__init (void);
void set_muxconf_regs (void);
@@ -58,8 +60,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK;
/* adress of boot parameters */
@@ -136,8 +136,6 @@
******************************/
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/omap730p2/omap730p2.c b/board/omap730p2/omap730p2.c
index 256c6a6..309d667 100644
--- a/board/omap730p2/omap730p2.c
+++ b/board/omap730p2/omap730p2.c
@@ -34,6 +34,8 @@
#include <./configs/omap730.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
int test_boot_mode(void);
void spin_up_leds(void);
void flash__init (void);
@@ -84,8 +86,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of OMAP 730 P2 Board - Same as the Innovator! */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_PERSEUS2;
@@ -180,8 +180,6 @@
******************************/
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c
index fa7ff02..6cc3cc5 100644
--- a/board/oxc/oxc.c
+++ b/board/oxc/oxc.c
@@ -26,6 +26,8 @@
#include <pci.h>
#include <i2c.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int checkboard (void)
{
puts ( "Board: OXC8240\n" );
@@ -184,8 +186,6 @@
#ifdef CFG_OXC_GENERATE_IP
{
- DECLARE_GLOBAL_DATA_PTR;
-
char str[32];
unsigned long ip = CFG_OXC_IPMASK;
bd_t *bd = gd->bd;
diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c
index 579bfc7..5f89d9b 100644
--- a/board/pcippc2/fpga_serial.c
+++ b/board/pcippc2/fpga_serial.c
@@ -29,6 +29,8 @@
#include "hardware.h"
#include "pcippc2.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* 8 data, 1 stop, no parity
*/
#define LCRVAL 0x03
@@ -92,8 +94,6 @@
void fpga_serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int clock_divisor = 115200 / gd->baudrate;
fpga_serial_wait ();
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index 231b505..a216c55 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -34,6 +34,8 @@
#include "sconsole.h"
#include "fpga_serial.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_WATCHDOG)
static int pcippc2_wdt_init_done = 0;
@@ -108,8 +110,6 @@
void after_reloc (ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Jump to the main U-Boot board init code
*/
board_init_r ((gd_t *)gd, dest_addr);
diff --git a/board/pcippc2/sconsole.c b/board/pcippc2/sconsole.c
index a9f2b29..3b19069 100644
--- a/board/pcippc2/sconsole.c
+++ b/board/pcippc2/sconsole.c
@@ -26,6 +26,8 @@
#include "sconsole.h"
+DECLARE_GLOBAL_DATA_PTR;
+
void (*sconsole_putc) (char) = 0;
void (*sconsole_puts) (const char *) = 0;
int (*sconsole_getc) (void) = 0;
@@ -34,8 +36,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
sconsole_buffer_t *sb = SCONSOLE_BUFFER;
sb->pos = 0;
@@ -104,8 +104,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (sconsole_setbrg) {
(*sconsole_setbrg) ();
} else {
diff --git a/board/pleb2/pleb2.c b/board/pleb2/pleb2.c
index ce9245c..dc6fac4 100644
--- a/board/pleb2/pleb2.c
+++ b/board/pleb2/pleb2.c
@@ -28,8 +28,7 @@
#include <common.h>
#include <asm-arm/mach-types.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -37,8 +36,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -61,8 +58,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index d4cc5cb..65c5291 100644
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -34,6 +34,8 @@
#include "mt48lc16m16a2-75.h"
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#ifndef CFG_RAMBOOT
static void sdram_start (int hi_addr)
{
@@ -281,7 +283,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
/* adjust flash start */
gd->bd->bi_flashstart = flash_info[0].start[0];
return (0);
diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c
index 377aaa8..b2f348d 100644
--- a/board/pn62/pn62.c
+++ b/board/pn62/pn62.c
@@ -26,6 +26,7 @@
#include "pn62.h"
+DECLARE_GLOBAL_DATA_PTR;
static int get_serial_number (char *string, int size);
static int get_mac_address (int id, u8 * mac, char *string, int size);
@@ -122,8 +123,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char str[20];
u8 mac[6];
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
index d42a643..2f28e9d 100644
--- a/board/prodrive/p3p440/p3p440.c
+++ b/board/prodrive/p3p440/p3p440.c
@@ -29,6 +29,8 @@
#include "p3p440.h"
+DECLARE_GLOBAL_DATA_PTR;
+
void set_led(int color)
{
switch (color) {
@@ -141,8 +143,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*
* Adjust flash start and offset to detected values
*/
@@ -206,8 +206,6 @@
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index d5b993a..5765c55 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -33,8 +33,7 @@
#include <common.h>
#include <command.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -42,8 +41,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -86,8 +83,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c
index 2861bc3..afa6e11 100644
--- a/board/quantum/quantum.c
+++ b/board/quantum/quantum.c
@@ -170,14 +170,14 @@
memctl->memc_mamr = mamr_value;
for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
- addr = base + cnt; /* pointer arith! */
+ addr = (volatile ulong *)(base + cnt); /* pointer arith! */
save[i++] = *addr;
*addr = ~cnt;
}
/* write 0 to base address */
- addr = base;
+ addr = (volatile ulong *)base;
save[i] = *addr;
*addr = 0;
@@ -194,7 +194,7 @@
}
for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
+ addr = (volatile ulong *)(base + cnt); /* pointer arith! */
val = *addr;
*addr = save[--i];
diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c
index c27929d..6d530f6 100644
--- a/board/rbc823/kbd.c
+++ b/board/rbc823/kbd.c
@@ -33,6 +33,8 @@
#include <devices.h>
#include <lcd.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define SMC_INDEX 0
#define PROFF_SMC PROFF_SMC1
#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
@@ -46,8 +48,6 @@
void smc1_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c
index ea4c65d..edb775d 100644
--- a/board/sacsng/clkinit.c
+++ b/board/sacsng/clkinit.c
@@ -30,6 +30,8 @@
#include "clkinit.h"
+DECLARE_GLOBAL_DATA_PTR;
+
int Daq64xSampling = 0;
@@ -257,7 +259,6 @@
uint Daq_BRG_Rate(uint brg)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *)CFG_IMMR;
uint *brg_ptr;
uint brg_cnt;
@@ -295,7 +296,6 @@
void Daq_Init_Clocks(int sample_rate, int sample_64x)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */);
uint mclk_divisor; /* MCLK divisor */
int flag; /* Interrupt state */
diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c
index 3530416..7816472 100644
--- a/board/sandburst/common/sb_common.c
+++ b/board/sandburst/common/sb_common.c
@@ -29,6 +29,8 @@
#include "ppc440gx_i2c.h"
#include "sb_common.h"
+DECLARE_GLOBAL_DATA_PTR;
+
long int fixed_sdram (void);
/*************************************************************************
@@ -203,7 +205,7 @@
long dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram (0);
+ dram_size = spd_sdram ();
#else
dram_size = fixed_sdram ();
#endif
@@ -341,8 +343,6 @@
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
diff --git a/board/sbc405/sbc405.c b/board/sbc405/sbc405.c
index cad5873..0ae6d0b 100644
--- a/board/sbc405/sbc405.c
+++ b/board/sbc405/sbc405.c
@@ -98,7 +98,7 @@
long int initdram (int board_type)
{
- return spd_sdram (0);
+ return spd_sdram ();
}
/* ------------------------------------------------------------------------- */
diff --git a/board/sbc8240/sbc8240.c b/board/sbc8240/sbc8240.c
index a6d3bab..8a52f67 100644
--- a/board/sbc8240/sbc8240.c
+++ b/board/sbc8240/sbc8240.c
@@ -29,12 +29,12 @@
#include <asm/processor.h>
#include <pci.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define BOARD_REV_REG 0xFE80002B
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char revision = *(volatile char *)(BOARD_REV_REG);
char buf[32];
diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c
index cd52324..b6add59 100644
--- a/board/sc520_cdp/sc520_cdp.c
+++ b/board/sc520_cdp/sc520_cdp.c
@@ -30,6 +30,8 @@
#include <asm/ic/ali512x.h>
#include <spi.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#undef SC520_CDP_DEBUG
#ifdef SC520_CDP_DEBUG
@@ -481,8 +483,6 @@
int board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
init_sc520();
bus_init();
irq_init();
diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c
index e7a7d51..ed226fd 100644
--- a/board/sc520_spunk/sc520_spunk.c
+++ b/board/sc520_spunk/sc520_spunk.c
@@ -29,9 +29,7 @@
#include <asm/pci.h>
#include <asm/ic/sc520.h>
-
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Theory:
@@ -483,8 +481,6 @@
int board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
init_sc520();
bus_init();
irq_init();
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
index 3ed8753..3f6831b 100644
--- a/board/scb9328/scb9328.c
+++ b/board/scb9328/scb9328.c
@@ -20,42 +20,41 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
#else
# define SHOW_BOOT_PROGRESS(arg)
#endif
-int board_init( void ){
- DECLARE_GLOBAL_DATA_PTR;
+int board_init (void)
+{
+ gd->bd->bi_arch_number = MACH_TYPE_SCB9328;
+ gd->bd->bi_boot_params = 0x08000100;
- gd->bd->bi_arch_number = MACH_TYPE_SCB9328;
- gd->bd->bi_boot_params = 0x08000100;
-
- return 0;
+ return 0;
}
-int dram_init( void ){
- DECLARE_GLOBAL_DATA_PTR;
-
+int dram_init (void)
+{
#if ( CONFIG_NR_DRAM_BANKS > 0 )
- gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
- gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE;
+ gd->bd->bi_dram[0].start = SCB9328_SDRAM_1;
+ gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE;
#endif
#if ( CONFIG_NR_DRAM_BANKS > 1 )
- gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
- gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE;
+ gd->bd->bi_dram[1].start = SCB9328_SDRAM_2;
+ gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE;
#endif
#if ( CONFIG_NR_DRAM_BANKS > 2 )
- gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
- gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE;
+ gd->bd->bi_dram[2].start = SCB9328_SDRAM_3;
+ gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE;
#endif
#if ( CONFIG_NR_DRAM_BANKS > 3 )
- gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
- gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE;
+ gd->bd->bi_dram[3].start = SCB9328_SDRAM_4;
+ gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE;
#endif
-
- return 0;
+ return 0;
}
/**
diff --git a/board/shannon/shannon.c b/board/shannon/shannon.c
index 0d9f146..8cd1fc3 100644
--- a/board/shannon/shannon.c
+++ b/board/shannon/shannon.c
@@ -24,8 +24,7 @@
#include <common.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -33,8 +32,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* but if we use InfernoLoader, we must do some inits here */
@@ -75,7 +72,6 @@
{
#if defined(PHYS_SDRAM_1) || defined(PHYS_SDRAM_2) || \
defined(PHYS_SDRAM_3) || defined(PHYS_SDRAM_4)
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
#endif
diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c
index d20688d..8783aaf 100644
--- a/board/siemens/SCM/scm.c
+++ b/board/siemens/SCM/scm.c
@@ -27,6 +27,8 @@
#include "scm.h"
+DECLARE_GLOBAL_DATA_PTR;
+
static void config_scoh_cs(void);
extern int fpga_init(void);
@@ -300,8 +302,6 @@
*/
int power_on_reset (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Test Reset Status Register */
return gd->reset_status & RSR_CSRS ? 0 : 1;
}
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
index a25dffd..a4cb4dc 100644
--- a/board/sixnet/sixnet.c
+++ b/board/sixnet/sixnet.c
@@ -38,6 +38,8 @@
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#define ORMASK(size) ((-size) & OR_AM_MSK)
static long ram_size(ulong *, long);
@@ -256,8 +258,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
char* s;
diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c
index cb70218..4d1f1a6 100644
--- a/board/smdk2400/smdk2400.c
+++ b/board/smdk2400/smdk2400.c
@@ -28,7 +28,7 @@
#include <common.h>
#include <s3c2400.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_MODEM_SUPPORT
static int key_pressed(void);
@@ -45,7 +45,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
@@ -94,8 +93,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/smdk2410/smdk2410.c b/board/smdk2410/smdk2410.c
index 9623aef..802348d 100644
--- a/board/smdk2410/smdk2410.c
+++ b/board/smdk2410/smdk2410.c
@@ -28,7 +28,7 @@
#include <common.h>
#include <s3c2410.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#define FCLK_SPEED 1
@@ -67,7 +67,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
@@ -117,8 +116,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/stamp/stamp.c b/board/stamp/stamp.c
index 3fe0134..7e3af20 100644
--- a/board/stamp/stamp.c
+++ b/board/stamp/stamp.c
@@ -29,6 +29,8 @@
#include <asm/mem_init.h>
#include "stamp.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define STATUS_LED_OFF 0
#define STATUS_LED_ON 1
@@ -49,7 +51,6 @@
long int initdram (int board_type)
{
- DECLARE_GLOBAL_DATA_PTR;
#ifdef DEBUG
printf ("SDRAM attributes:\n");
printf (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; "
diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c
index e45f6ae..aaef76e 100644
--- a/board/sx1/sx1.c
+++ b/board/sx1/sx1.c
@@ -27,6 +27,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static void flash__init (void);
static void ether__init (void);
@@ -43,8 +45,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* arch number of SX1 Board */
gd->bd->bi_arch_number = MACH_TYPE_SX1;
@@ -116,8 +116,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
index dada673..b5c12e3 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqm834x/tqm834x.c
@@ -32,6 +32,8 @@
#include <asm-ppc/mmu.h>
#include <pci.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define IOSYNC asm("eieio")
#define ISYNC asm("isync")
#define SYNC asm("sync")
@@ -142,7 +144,6 @@
puts("Board: TQM834x\n");
#ifdef CONFIG_PCI
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t * immr;
u32 w, f;
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index c03b60d..69b9101 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -36,6 +36,8 @@
#include <spd.h>
#include <flash.h>
+DECLARE_GLOBAL_DATA_PTR;
+
extern flash_info_t flash_info[]; /* FLASH chips info */
void local_bus_init (void);
@@ -257,7 +259,6 @@
int misc_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_lbc_t *memctl = &immap->im_lbc;
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index 97bb5c3..ab57ee5 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -31,6 +31,8 @@
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
# ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
# define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
@@ -63,8 +65,6 @@
#ifdef CFG_OR_TIMING_FLASH_AT_50MHZ
int scy, trlx, flash_or_timing, clk_diff;
- DECLARE_GLOBAL_DATA_PTR;
-
scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
trlx = OR_TRLX;
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index 017bdf9..520bea8 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -31,12 +31,10 @@
#include <ps2mult.h>
#endif
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
static long int dram_size (long int, long int *, long int);
-/* ------------------------------------------------------------------------- */
-
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] =
@@ -104,8 +102,6 @@
int checkboard (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char *s = getenv ("serial#");
puts ("Board: ");
diff --git a/board/trab/memory.c b/board/trab/memory.c
index 9104413..4097892 100644
--- a/board/trab/memory.c
+++ b/board/trab/memory.c
@@ -454,10 +454,11 @@
}
#if 0
+DECLARE_GLOBAL_DATA_PTR;
+
int memory_post_test (int flags)
{
int ret = 0;
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
unsigned long memsize = (bd->bi_memsize >= 256 << 20 ?
256 << 20 : bd->bi_memsize) - (1 << 20);
diff --git a/board/trab/trab.c b/board/trab/trab.c
index e8dfd2c..868a899 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -28,7 +28,7 @@
#include <s3c2400.h>
#include <command.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#ifdef CFG_BRIGHTNESS
static void spi_init(void);
@@ -52,8 +52,6 @@
#define KBD_MDELAY 5000
static void udelay_no_timer (int usec)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
int delay = usec * 3;
@@ -70,7 +68,6 @@
#if defined(CONFIG_VFD)
extern int vfd_init_clocks(void);
#endif
- DECLARE_GLOBAL_DATA_PTR;
S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
@@ -141,8 +138,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return 0;
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index f510ee5..cea8b0b 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -39,6 +39,8 @@
#include <devices.h>
#include <s3c2400.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_VFD
/************************************************************************/
@@ -86,7 +88,6 @@
*/
void init_grid_ctrl(void)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong adr, grid_cycle;
unsigned int bit, display;
unsigned char temp, bit_nr;
@@ -172,7 +173,6 @@
*/
void create_vfd_table(void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned long vfd_table[112][18][2][4][2];
unsigned int x, y, color, display, entry, pixel;
unsigned int x_abcdef = 0;
@@ -280,7 +280,6 @@
unsigned char color, unsigned char display,
unsigned char value)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong adr;
unsigned char bit_nr, temp;
@@ -435,8 +434,6 @@
static int vfd_init_done = 0;
int vfd_inv_data = 0;
- DECLARE_GLOBAL_DATA_PTR;
-
if (vfd_init_done != 0)
return (0);
vfd_init_done = 1;
diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c
index 0274027..9d1a25e 100644
--- a/board/versatile/versatile.c
+++ b/board/versatile/versatile.c
@@ -35,6 +35,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void flash__init (void);
void ether__init (void);
void peripheral_power_enable (void);
@@ -61,9 +63,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
-
/*
* set clock frequency:
* VERSATILE_REFCLK is 32KHz
diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c
index 7a2d243..04093d1 100644
--- a/board/voiceblue/voiceblue.c
+++ b/board/voiceblue/voiceblue.c
@@ -21,10 +21,10 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
*((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
/* arch number of VoiceBlue board */
@@ -39,8 +39,6 @@
int dram_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
*((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
/* Take the Ethernet controller out of reset and wait
diff --git a/board/wepep250/wepep250.c b/board/wepep250/wepep250.c
index 56cb855..fe4b6a9 100644
--- a/board/wepep250/wepep250.c
+++ b/board/wepep250/wepep250.c
@@ -23,45 +23,45 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
-int board_init( void ){
- DECLARE_GLOBAL_DATA_PTR;
+DECLARE_GLOBAL_DATA_PTR;
- gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250;
- gd->bd->bi_boot_params = 0xa0000000;
+int board_init (void)
+{
+ gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250;
+ gd->bd->bi_boot_params = 0xa0000000;
/*
* Setup GPIO stuff to get serial working
*/
#if defined( CONFIG_FFUART )
- GPDR1 = 0x80;
- GAFR1_L = 0x8010;
+ GPDR1 = 0x80;
+ GAFR1_L = 0x8010;
#elif defined( CONFIG_BTUART )
- GPDR1 = 0x800;
- GAFR1_L = 0x900000;
+ GPDR1 = 0x800;
+ GAFR1_L = 0x900000;
#endif
- PSSR = 0x20;
+ PSSR = 0x20;
- return 0;
+ return 0;
}
-int dram_init( void ){
- DECLARE_GLOBAL_DATA_PTR;
-
+int dram_init (void)
+{
#if ( CONFIG_NR_DRAM_BANKS > 0 )
- gd->bd->bi_dram[0].start = WEP_SDRAM_1;
- gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE;
+ gd->bd->bi_dram[0].start = WEP_SDRAM_1;
+ gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE;
#endif
#if ( CONFIG_NR_DRAM_BANKS > 1 )
- gd->bd->bi_dram[1].start = WEP_SDRAM_2;
- gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE;
+ gd->bd->bi_dram[1].start = WEP_SDRAM_2;
+ gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE;
#endif
#if ( CONFIG_NR_DRAM_BANKS > 2 )
- gd->bd->bi_dram[2].start = WEP_SDRAM_3;
- gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE;
+ gd->bd->bi_dram[2].start = WEP_SDRAM_3;
+ gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE;
#endif
#if ( CONFIG_NR_DRAM_BANKS > 3 )
- gd->bd->bi_dram[3].start = WEP_SDRAM_4;
- gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE;
+ gd->bd->bi_dram[3].start = WEP_SDRAM_4;
+ gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE;
#endif
- return 0;
+ return 0;
}
diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c
index 26fb312..9baa457 100644
--- a/board/xaeniax/xaeniax.c
+++ b/board/xaeniax/xaeniax.c
@@ -30,8 +30,7 @@
#include <common.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -39,8 +38,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -63,8 +60,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
/* gd->bd->bi_dram[1].start = PHYS_SDRAM_2;*/
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
index 19bcc6f..c204b88 100644
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@@ -43,6 +43,8 @@
#include <configs/ml300.h>
#include "xparameters.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define USE_CHAN1 \
((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1))
#define USE_CHAN2 \
@@ -64,7 +66,6 @@
serial_init(void)
{
#if USE_CHAN1
- DECLARE_GLOBAL_DATA_PTR;
int clock_divisor;
clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
@@ -103,7 +104,6 @@
serial_setbrg(void)
{
#if USE_CHAN1
- DECLARE_GLOBAL_DATA_PTR;
int clock_divisor;
clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate;
diff --git a/board/xm250/xm250.c b/board/xm250/xm250.c
index ef5e9da..528d323 100644
--- a/board/xm250/xm250.c
+++ b/board/xm250/xm250.c
@@ -28,6 +28,8 @@
#include <asm/arch/pxa-regs.h>
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/* local prototypes */
@@ -61,7 +63,6 @@
board_init (void)
/**********************************************************/
{
- DECLARE_GLOBAL_DATA_PTR;
/* arch number of MicroSys XM250 */
gd->bd->bi_arch_number = MACH_TYPE_XM250;
@@ -76,8 +77,6 @@
dram_init (void)
/**********************************************************/
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c
index bb36c96..a569b53 100644
--- a/board/xpedite1k/xpedite1k.c
+++ b/board/xpedite1k/xpedite1k.c
@@ -26,6 +26,8 @@
#include <spd_sdram.h>
#include <i2c.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define BOOT_SMALL_FLASH 32 /* 00100000 */
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
@@ -107,7 +109,7 @@
long dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram (0);
+ dram_size = spd_sdram ();
#else
dram_size = fixed_sdram ();
#endif
@@ -238,8 +240,6 @@
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller * hose )
{
- DECLARE_GLOBAL_DATA_PTR;
-
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
diff --git a/board/xsengine/xsengine.c b/board/xsengine/xsengine.c
index a9919db..23d56c4 100644
--- a/board/xsengine/xsengine.c
+++ b/board/xsengine/xsengine.c
@@ -27,14 +27,14 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Miscelaneous platform dependent initialisations
*/
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -56,8 +56,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
diff --git a/board/zylonite/zylonite.c b/board/zylonite/zylonite.c
index e618ab9..5829170 100644
--- a/board/zylonite/zylonite.c
+++ b/board/zylonite/zylonite.c
@@ -27,8 +27,7 @@
#include <common.h>
-/* ------------------------------------------------------------------------- */
-
+DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
@@ -36,8 +35,6 @@
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
@@ -60,8 +57,6 @@
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
diff --git a/common/Makefile b/common/Makefile
index 7dbf84a..eb0b5da 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -51,7 +51,7 @@
memsize.o miiphybb.o miiphyutil.o \
s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \
usb.o usb_kbd.o usb_storage.o \
- virtex2.o xilinx.o
+ virtex2.o xilinx.o crc16.o xyzModem.o
OBJS = $(AOBJS) $(COBJS)
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 40e28dd..04fa4fa 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -28,6 +28,7 @@
#include <command.h>
#include <net.h> /* for print_IPaddr */
+DECLARE_GLOBAL_DATA_PTR;
#if (CONFIG_COMMANDS & CFG_CMD_BDI)
static void print_num(const char *, ulong);
@@ -39,8 +40,6 @@
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
bd_t *bd = gd->bd;
char buf[32];
@@ -127,8 +126,6 @@
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
bd_t *bd = gd->bd;
@@ -153,8 +150,6 @@
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
bd_t *bd = gd->bd;
@@ -187,8 +182,6 @@
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
bd_t *bd = gd->bd;
@@ -215,8 +208,6 @@
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i;
bd_t *bd = gd->bd;
diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c
index cdb379d..48086a6 100644
--- a/common/cmd_bedbug.c
+++ b/common/cmd_bedbug.c
@@ -11,187 +11,183 @@
#include <bedbug/regs.h>
#include <bedbug/ppc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
#ifndef MAX
#define MAX(a,b) ((a) > (b) ? (a) : (b))
#endif
-extern void show_regs __P((struct pt_regs*));
-extern int run_command __P((const char*, int));
+extern void show_regs __P ((struct pt_regs *));
+extern int run_command __P ((const char *, int));
extern char console_buffer[];
-ulong dis_last_addr = 0; /* Last address disassembled */
-ulong dis_last_len = 20; /* Default disassembler length */
-CPU_DEBUG_CTX bug_ctx; /* Bedbug context structure */
-
+ulong dis_last_addr = 0; /* Last address disassembled */
+ulong dis_last_len = 20; /* Default disassembler length */
+CPU_DEBUG_CTX bug_ctx; /* Bedbug context structure */
+
/* ======================================================================
* U-Boot's puts function does not append a newline, so the bedbug stuff
* will use this for the output of the dis/assembler.
* ====================================================================== */
-int bedbug_puts(const char *str)
+int bedbug_puts (const char *str)
{
- /* -------------------------------------------------- */
+ /* -------------------------------------------------- */
- printf( "%s\r\n", str );
- return 0;
-} /* bedbug_puts */
-
-
+ printf ("%s\r\n", str);
+ return 0;
+} /* bedbug_puts */
+
+
/* ======================================================================
* Initialize the bug_ctx structure used by the bedbug debugger. This is
* specific to the CPU since each has different debug registers and
* settings.
* ====================================================================== */
-void bedbug_init( void )
+void bedbug_init (void)
{
- /* -------------------------------------------------- */
+ /* -------------------------------------------------- */
#if defined(CONFIG_4xx)
- void bedbug405_init( void );
- bedbug405_init();
+ void bedbug405_init (void);
+
+ bedbug405_init ();
#elif defined(CONFIG_8xx)
- void bedbug860_init( void );
- bedbug860_init();
+ void bedbug860_init (void);
+
+ bedbug860_init ();
#endif
#if defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260)
- /* Processors that are 603e core based */
- void bedbug603e_init( void );
+ /* Processors that are 603e core based */
+ void bedbug603e_init (void);
- bedbug603e_init();
+ bedbug603e_init ();
#endif
- return;
-} /* bedbug_init */
-
-
+ return;
+} /* bedbug_init */
+
+
/* ======================================================================
* Entry point from the interpreter to the disassembler. Repeated calls
* will resume from the last disassembled address.
* ====================================================================== */
-int do_bedbug_dis (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- ulong addr; /* Address to start disassembly from */
- ulong len; /* # of instructions to disassemble */
- /* -------------------------------------------------- */
+ ulong addr; /* Address to start disassembly from */
+ ulong len; /* # of instructions to disassemble */
- /* Setup to go from the last address if none is given */
- addr = dis_last_addr;
- len = dis_last_len;
+ /* -------------------------------------------------- */
- if (argc < 2)
- {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ /* Setup to go from the last address if none is given */
+ addr = dis_last_addr;
+ len = dis_last_len;
- if(( flag & CMD_FLAG_REPEAT ) == 0 )
- {
- /* New command */
- addr = simple_strtoul( argv[1], NULL, 16 );
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
- /* If an extra param is given then it is the length */
- if( argc > 2 )
- len = simple_strtoul( argv[2], NULL, 16 );
- }
+ if ((flag & CMD_FLAG_REPEAT) == 0) {
+ /* New command */
+ addr = simple_strtoul (argv[1], NULL, 16);
- /* Run the disassembler */
- disppc( (unsigned char *)addr, 0, len, bedbug_puts, F_RADHEX );
+ /* If an extra param is given then it is the length */
+ if (argc > 2)
+ len = simple_strtoul (argv[2], NULL, 16);
+ }
- dis_last_addr = addr + (len * 4);
- dis_last_len = len;
- return 0;
-} /* do_bedbug_dis */
-U_BOOT_CMD(
- ds, 3, 1, do_bedbug_dis,
- "ds - disassemble memory\n",
- "ds <address> [# instructions]\n"
-);
+ /* Run the disassembler */
+ disppc ((unsigned char *) addr, 0, len, bedbug_puts, F_RADHEX);
+
+ dis_last_addr = addr + (len * 4);
+ dis_last_len = len;
+ return 0;
+} /* do_bedbug_dis */
+
+U_BOOT_CMD (ds, 3, 1, do_bedbug_dis,
+ "ds - disassemble memory\n",
+ "ds <address> [# instructions]\n");
/* ======================================================================
* Entry point from the interpreter to the assembler. Assembles
* instructions in consecutive memory locations until a '.' (period) is
* entered on a line by itself.
* ====================================================================== */
-int do_bedbug_asm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- long mem_addr; /* Address to assemble into */
- unsigned long instr; /* Machine code for text */
- char prompt[ 15 ]; /* Prompt string for user input */
- int asm_err; /* Error code from the assembler*/
- /* -------------------------------------------------- */
- int rcode = 0;
+ long mem_addr; /* Address to assemble into */
+ unsigned long instr; /* Machine code for text */
+ char prompt[15]; /* Prompt string for user input */
+ int asm_err; /* Error code from the assembler */
- if (argc < 2)
- {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ /* -------------------------------------------------- */
+ int rcode = 0;
- printf( "\nEnter '.' when done\n" );
- mem_addr = simple_strtoul( argv[ 1 ], NULL, 16 );
+ if (argc < 2) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
- while( 1 )
- {
- putc( '\n' );
- disppc( (unsigned char *)mem_addr, 0, 1, bedbug_puts, F_RADHEX );
+ printf ("\nEnter '.' when done\n");
+ mem_addr = simple_strtoul (argv[1], NULL, 16);
- sprintf( prompt, "%08lx: ", mem_addr );
- readline( prompt );
+ while (1) {
+ putc ('\n');
+ disppc ((unsigned char *) mem_addr, 0, 1, bedbug_puts,
+ F_RADHEX);
- if( console_buffer[ 0 ] && strcmp( console_buffer, "." ))
- {
- if(( instr = asmppc( mem_addr, console_buffer, &asm_err )) != 0 )
- {
- *(unsigned long *)mem_addr = instr;
- mem_addr += 4;
- }
- else
- {
- printf( "*** Error: %s ***\n", asm_error_str( asm_err ));
- rcode = 1;
- }
- }
- else
- {
- break;
- }
- }
- return rcode;
-} /* do_bedbug_asm */
-U_BOOT_CMD(
- as, 2, 0, do_bedbug_asm,
- "as - assemble memory\n",
- "as <address>\n"
-);
+ sprintf (prompt, "%08lx: ", mem_addr);
+ readline (prompt);
+
+ if (console_buffer[0] && strcmp (console_buffer, ".")) {
+ if ((instr =
+ asmppc (mem_addr, console_buffer,
+ &asm_err)) != 0) {
+ *(unsigned long *) mem_addr = instr;
+ mem_addr += 4;
+ } else {
+ printf ("*** Error: %s ***\n",
+ asm_error_str (asm_err));
+ rcode = 1;
+ }
+ } else {
+ break;
+ }
+ }
+ return rcode;
+} /* do_bedbug_asm */
+
+U_BOOT_CMD (as, 2, 0, do_bedbug_asm,
+ "as - assemble memory\n", "as <address>\n");
/* ======================================================================
* Used to set a break point from the interpreter. Simply calls into the
* CPU-specific break point set routine.
* ====================================================================== */
-int do_bedbug_break (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- /* -------------------------------------------------- */
- if( bug_ctx.do_break )
- (*bug_ctx.do_break)( cmdtp, flag, argc, argv );
- return 0;
+ /* -------------------------------------------------- */
+ if (bug_ctx.do_break)
+ (*bug_ctx.do_break) (cmdtp, flag, argc, argv);
+ return 0;
-} /* do_bedbug_break */
-U_BOOT_CMD(
- break, 3, 0, do_bedbug_break,
- "break - set or clear a breakpoint\n",
- " - Set or clear a breakpoint\n"
- "break <address> - Break at an address\n"
- "break off <bp#> - Disable breakpoint.\n"
- "break show - List breakpoints.\n"
-);
+} /* do_bedbug_break */
+
+U_BOOT_CMD (break, 3, 0, do_bedbug_break,
+ "break - set or clear a breakpoint\n",
+ " - Set or clear a breakpoint\n"
+ "break <address> - Break at an address\n"
+ "break off <bp#> - Disable breakpoint.\n"
+ "break show - List breakpoints.\n");
/* ======================================================================
* Called from the debug interrupt routine. Simply calls the CPU-specific
@@ -200,16 +196,16 @@
void do_bedbug_breakpoint (struct pt_regs *regs)
{
- /* -------------------------------------------------- */
+ /* -------------------------------------------------- */
- if( bug_ctx.break_isr )
- (*bug_ctx.break_isr)( regs );
+ if (bug_ctx.break_isr)
+ (*bug_ctx.break_isr) (regs);
- return;
-} /* do_bedbug_breakpoint */
-
-
+ return;
+} /* do_bedbug_breakpoint */
+
+
/* ======================================================================
* Called from the CPU-specific breakpoint handling routine. Enter a
* mini main loop until the stopped flag is cleared from the breakpoint
@@ -218,81 +214,77 @@
* This handles the parts of the debugger that are common to all CPU's.
* ====================================================================== */
-void bedbug_main_loop( unsigned long addr, struct pt_regs *regs )
+void bedbug_main_loop (unsigned long addr, struct pt_regs *regs)
{
- int len; /* Length of command line */
- int flag; /* Command flags */
- int rc = 0; /* Result from run_command*/
- char prompt_str[ 20 ]; /* Prompt string */
- static char lastcommand[ CFG_CBSIZE ] = {0}; /* previous command */
- /* -------------------------------------------------- */
+ int len; /* Length of command line */
+ int flag; /* Command flags */
+ int rc = 0; /* Result from run_command */
+ char prompt_str[20]; /* Prompt string */
+ static char lastcommand[CFG_CBSIZE] = { 0 }; /* previous command */
+ /* -------------------------------------------------- */
- if( bug_ctx.clear )
- (*bug_ctx.clear)( bug_ctx.current_bp );
+ if (bug_ctx.clear)
+ (*bug_ctx.clear) (bug_ctx.current_bp);
- printf( "Breakpoint %d: ", bug_ctx.current_bp );
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
+ printf ("Breakpoint %d: ", bug_ctx.current_bp);
+ disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
- bug_ctx.stopped = 1;
- bug_ctx.regs = regs;
+ bug_ctx.stopped = 1;
+ bug_ctx.regs = regs;
- sprintf( prompt_str, "BEDBUG.%d =>", bug_ctx.current_bp );
+ sprintf (prompt_str, "BEDBUG.%d =>", bug_ctx.current_bp);
- /* A miniature main loop */
- while( bug_ctx.stopped )
- {
- len = readline( prompt_str );
+ /* A miniature main loop */
+ while (bug_ctx.stopped) {
+ len = readline (prompt_str);
- flag = 0; /* assume no special flags for now */
+ flag = 0; /* assume no special flags for now */
- if (len > 0)
- strcpy( lastcommand, console_buffer );
- else if( len == 0 )
- flag |= CMD_FLAG_REPEAT;
+ if (len > 0)
+ strcpy (lastcommand, console_buffer);
+ else if (len == 0)
+ flag |= CMD_FLAG_REPEAT;
- if (len == -1)
- printf ("<INTERRUPT>\n");
- else
- rc = run_command( lastcommand, flag );
+ if (len == -1)
+ printf ("<INTERRUPT>\n");
+ else
+ rc = run_command (lastcommand, flag);
- if (rc <= 0) {
- /* invalid command or not repeatable, forget it */
- lastcommand[0] = 0;
- }
- }
+ if (rc <= 0) {
+ /* invalid command or not repeatable, forget it */
+ lastcommand[0] = 0;
+ }
+ }
- bug_ctx.regs = NULL;
- bug_ctx.current_bp = 0;
+ bug_ctx.regs = NULL;
+ bug_ctx.current_bp = 0;
- return;
-} /* bedbug_main_loop */
-
-
+ return;
+} /* bedbug_main_loop */
+
+
/* ======================================================================
* Interpreter command to continue from a breakpoint. Just clears the
* stopped flag in the context so that the breakpoint routine will
* return.
* ====================================================================== */
-int do_bedbug_continue (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-
+int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- /* -------------------------------------------------- */
+ /* -------------------------------------------------- */
- if( ! bug_ctx.stopped )
- {
- printf( "Not at a breakpoint\n" );
- return 1;
- }
+ if (!bug_ctx.stopped) {
+ printf ("Not at a breakpoint\n");
+ return 1;
+ }
- bug_ctx.stopped = 0;
- return 0;
-} /* do_bedbug_continue */
-U_BOOT_CMD(
- continue, 1, 0, do_bedbug_continue,
- "continue- continue from a breakpoint\n",
- " - continue from a breakpoint.\n"
-);
+ bug_ctx.stopped = 0;
+ return 0;
+} /* do_bedbug_continue */
+
+U_BOOT_CMD (continue, 1, 0, do_bedbug_continue,
+ "continue- continue from a breakpoint\n",
+ " - continue from a breakpoint.\n");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping into
@@ -300,31 +292,30 @@
* the address passes control to the CPU-specific set breakpoint routine
* for the current breakpoint number.
* ====================================================================== */
-int do_bedbug_step (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- unsigned long addr; /* Address to stop at */
- /* -------------------------------------------------- */
+ unsigned long addr; /* Address to stop at */
- if( ! bug_ctx.stopped )
- {
- printf( "Not at a breakpoint\n" );
- return 1;
- }
+ /* -------------------------------------------------- */
- if( !find_next_address( (unsigned char *)&addr, FALSE, bug_ctx.regs ))
- return 1;
+ if (!bug_ctx.stopped) {
+ printf ("Not at a breakpoint\n");
+ return 1;
+ }
- if( bug_ctx.set )
- (*bug_ctx.set)( bug_ctx.current_bp, addr );
+ if (!find_next_address ((unsigned char *) &addr, FALSE, bug_ctx.regs))
+ return 1;
- bug_ctx.stopped = 0;
- return 0;
-} /* do_bedbug_step */
-U_BOOT_CMD(
- step, 1, 1, do_bedbug_step,
- "step - single step execution.\n",
- " - single step execution.\n"
-);
+ if (bug_ctx.set)
+ (*bug_ctx.set) (bug_ctx.current_bp, addr);
+
+ bug_ctx.stopped = 0;
+ return 0;
+} /* do_bedbug_step */
+
+U_BOOT_CMD (step, 1, 1, do_bedbug_step,
+ "step - single step execution.\n",
+ " - single step execution.\n");
/* ======================================================================
* Interpreter command to continue to the next instruction, stepping over
@@ -332,105 +323,97 @@
* the address passes control to the CPU-specific set breakpoint routine
* for the current breakpoint number.
* ====================================================================== */
-int do_bedbug_next (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- unsigned long addr; /* Address to stop at */
- /* -------------------------------------------------- */
+ unsigned long addr; /* Address to stop at */
- if( ! bug_ctx.stopped )
- {
- printf( "Not at a breakpoint\n" );
- return 1;
- }
+ /* -------------------------------------------------- */
- if( !find_next_address( (unsigned char *)&addr, TRUE, bug_ctx.regs ))
- return 1;
+ if (!bug_ctx.stopped) {
+ printf ("Not at a breakpoint\n");
+ return 1;
+ }
- if( bug_ctx.set )
- (*bug_ctx.set)( bug_ctx.current_bp, addr );
+ if (!find_next_address ((unsigned char *) &addr, TRUE, bug_ctx.regs))
+ return 1;
- bug_ctx.stopped = 0;
- return 0;
-} /* do_bedbug_next */
-U_BOOT_CMD(
- next, 1, 1, do_bedbug_next,
- "next - single step execution, stepping over subroutines.\n",
- " - single step execution, stepping over subroutines.\n"
-);
+ if (bug_ctx.set)
+ (*bug_ctx.set) (bug_ctx.current_bp, addr);
+
+ bug_ctx.stopped = 0;
+ return 0;
+} /* do_bedbug_next */
+
+U_BOOT_CMD (next, 1, 1, do_bedbug_next,
+ "next - single step execution, stepping over subroutines.\n",
+ " - single step execution, stepping over subroutines.\n");
/* ======================================================================
* Interpreter command to print the current stack. This assumes an EABI
* architecture, so it starts with GPR R1 and works back up the stack.
* ====================================================================== */
-int do_bedbug_stack (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
+ unsigned long sp; /* Stack pointer */
+ unsigned long func; /* LR from stack */
+ int depth; /* Stack iteration level */
+ int skip = 1; /* Flag to skip the first entry */
+ unsigned long top; /* Top of memory address */
- unsigned long sp; /* Stack pointer */
- unsigned long func; /* LR from stack */
- int depth; /* Stack iteration level */
- int skip = 1; /* Flag to skip the first entry */
- unsigned long top; /* Top of memory address */
- /* -------------------------------------------------- */
+ /* -------------------------------------------------- */
- if( ! bug_ctx.stopped )
- {
- printf( "Not at a breakpoint\n" );
- return 1;
- }
+ if (!bug_ctx.stopped) {
+ printf ("Not at a breakpoint\n");
+ return 1;
+ }
- top = gd->bd->bi_memstart + gd->bd->bi_memsize;
- depth = 0;
+ top = gd->bd->bi_memstart + gd->bd->bi_memsize;
+ depth = 0;
- printf( "Depth PC\n" );
- printf( "----- --------\n" );
- printf( "%5d %08lx\n", depth++, bug_ctx.regs->nip );
+ printf ("Depth PC\n");
+ printf ("----- --------\n");
+ printf ("%5d %08lx\n", depth++, bug_ctx.regs->nip);
- sp = bug_ctx.regs->gpr[ 1 ];
- func = *(unsigned long *)(sp+4);
+ sp = bug_ctx.regs->gpr[1];
+ func = *(unsigned long *) (sp + 4);
- while(( func < top ) && ( sp < top ))
- {
- if( !skip )
- printf( "%5d %08lx\n", depth++, func );
- else
- --skip;
+ while ((func < top) && (sp < top)) {
+ if (!skip)
+ printf ("%5d %08lx\n", depth++, func);
+ else
+ --skip;
- sp = *(unsigned long *)sp;
- func = *(unsigned long *)(sp+4);
- }
- return 0;
-} /* do_bedbug_stack */
-U_BOOT_CMD(
- where, 1, 1, do_bedbug_stack,
- "where - Print the running stack.\n",
- " - Print the running stack.\n"
-);
+ sp = *(unsigned long *) sp;
+ func = *(unsigned long *) (sp + 4);
+ }
+ return 0;
+} /* do_bedbug_stack */
+
+U_BOOT_CMD (where, 1, 1, do_bedbug_stack,
+ "where - Print the running stack.\n",
+ " - Print the running stack.\n");
/* ======================================================================
* Interpreter command to dump the registers. Calls the CPU-specific
* show registers routine.
* ====================================================================== */
-int do_bedbug_rdump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- /* -------------------------------------------------- */
+ /* -------------------------------------------------- */
- if( ! bug_ctx.stopped )
- {
- printf( "Not at a breakpoint\n" );
- return 1;
- }
+ if (!bug_ctx.stopped) {
+ printf ("Not at a breakpoint\n");
+ return 1;
+ }
- show_regs( bug_ctx.regs );
- return 0;
-} /* do_bedbug_rdump */
-U_BOOT_CMD(
- rdump, 1, 1, do_bedbug_rdump,
- "rdump - Show registers.\n",
- " - Show registers.\n"
-);
+ show_regs (bug_ctx.regs);
+ return 0;
+} /* do_bedbug_rdump */
+
+U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
+ "rdump - Show registers.\n", " - Show registers.\n");
/* ====================================================================== */
-#endif /* CFG_CMD_BEDBUG */
+#endif /* CFG_CMD_BEDBUG */
/*
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index 5b58d4e..e68f16f 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -28,14 +28,12 @@
#include <command.h>
#include <net.h>
-
-/* -------------------------------------------------------------------- */
+#if defined(CONFIG_I386)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#if defined(CONFIG_I386)
- DECLARE_GLOBAL_DATA_PTR;
-#endif
ulong addr, rc;
int rcode = 0;
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index aeb7842..fdf7180 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -38,6 +38,8 @@
#include <ft_build.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -469,7 +471,6 @@
static void
fixup_silent_linux ()
{
- DECLARE_GLOBAL_DATA_PTR;
char buf[256], *start, *end;
char *cmdline = getenv ("bootargs");
@@ -512,8 +513,6 @@
ulong *len_ptr,
int verify)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong sp;
ulong len, checksum;
ulong initrd_start, initrd_end;
@@ -856,8 +855,6 @@
ulong *len_ptr,
int verify)
{
- DECLARE_GLOBAL_DATA_PTR;
-
image_header_t *hdr = &header;
void (*loader)(bd_t *, image_header_t *, char *, char *);
@@ -941,7 +938,6 @@
ulong *len_ptr,
int verify)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong top;
char *s, *cmdline;
char **fwenv, **ss;
@@ -1370,7 +1366,6 @@
do_bootm_rtems (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong *len_ptr, int verify)
{
- DECLARE_GLOBAL_DATA_PTR;
image_header_t *hdr = &header;
void (*entry_point)(bd_t *);
diff --git a/common/cmd_date.c b/common/cmd_date.c
index a569d78..84932f7 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -28,6 +28,8 @@
#include <command.h>
#include <rtc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if (CONFIG_COMMANDS & CFG_CMD_DATE)
const char *weekdays[] = {
@@ -40,7 +42,6 @@
int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
struct rtc_time tm;
int rcode = 0;
diff --git a/common/cmd_elf.c b/common/cmd_elf.c
index eccf2e9..1d92bb3 100644
--- a/common/cmd_elf.c
+++ b/common/cmd_elf.c
@@ -19,6 +19,9 @@
#include <net.h>
#include <elf.h>
+#if defined(CONFIG_WALNUT) || defined(CFG_VXWORKS_MAC_PTR)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
#if (CONFIG_COMMANDS & CFG_CMD_ELF)
@@ -78,11 +81,6 @@
* ====================================================================== */
int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#if defined(CONFIG_WALNUT) || \
- defined(CFG_VXWORKS_MAC_PTR)
- DECLARE_GLOBAL_DATA_PTR;
-#endif
-
unsigned long addr; /* Address of image */
unsigned long bootaddr; /* Address to put the bootline */
char *bootline; /* Text of the bootline */
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index b67d35a..41621ba 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -60,6 +60,10 @@
# define SHOW_BOOT_PROGRESS(arg)
#endif
+#ifdef CONFIG_IDE_8xx_DIRECT
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
#ifdef __PPC__
# define EIEIO __asm__ volatile ("eieio")
# define SYNC __asm__ volatile ("sync")
@@ -498,7 +502,6 @@
{
#ifdef CONFIG_IDE_8xx_DIRECT
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
#endif
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 559d7b4..fa79b45 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -41,6 +41,10 @@
#include <asm/iopin_8260.h>
#endif
+#if defined(CONFIG_8xx) || defined(CONFIG_8260)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
static void
unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -450,10 +454,8 @@
uint div16 = (val & CPM_BRG_DIV16) != 0;
#if defined(CONFIG_8xx)
- DECLARE_GLOBAL_DATA_PTR;
ulong clock = gd->cpu_clk;
#elif defined(CONFIG_8260)
- DECLARE_GLOBAL_DATA_PTR;
ulong clock = gd->brg_clk;
#endif
diff --git a/common/cmd_load.c b/common/cmd_load.c
index 7498497..31fef81 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -29,10 +29,13 @@
#include <s_record.h>
#include <net.h>
#include <exports.h>
+#include <xyzModem.h>
+DECLARE_GLOBAL_DATA_PTR;
#if (CONFIG_COMMANDS & CFG_CMD_LOADS)
static ulong load_serial (ulong offset);
+static ulong load_serial_ymodem (ulong offset);
static int read_record (char *buf, ulong len);
# if (CONFIG_COMMANDS & CFG_CMD_SAVES)
static int save_serial (ulong offset, ulong size);
@@ -53,7 +56,6 @@
char *env_echo;
int rcode = 0;
#ifdef CFG_LOADS_BAUD_CHANGE
- DECLARE_GLOBAL_DATA_PTR;
int load_baudrate, current_baudrate;
load_baudrate = current_baudrate = gd->baudrate;
@@ -213,7 +215,6 @@
static int
read_record (char *buf, ulong len)
{
- DECLARE_GLOBAL_DATA_PTR;
char *p;
char c;
@@ -256,7 +257,6 @@
ulong offset = 0;
ulong size = 0;
#ifdef CFG_LOADS_BAUD_CHANGE
- DECLARE_GLOBAL_DATA_PTR;
int save_baudrate, current_baudrate;
save_baudrate = current_baudrate = gd->baudrate;
@@ -433,8 +433,6 @@
int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong offset = 0;
ulong addr;
int load_baudrate, current_baudrate;
@@ -475,21 +473,31 @@
}
}
- printf ("## Ready for binary (kermit) download "
- "to 0x%08lX at %d bps...\n",
- offset,
- load_baudrate);
- addr = load_serial_bin (offset);
+ if (strcmp(argv[0],"loady")==0) {
+ printf ("## Ready for binary (ymodem) download "
+ "to 0x%08lX at %d bps...\n",
+ offset,
+ load_baudrate);
- if (addr == ~0) {
- load_addr = 0;
- printf ("## Binary (kermit) download aborted\n");
- rcode = 1;
+ addr = load_serial_ymodem (offset);
+
} else {
- printf ("## Start Addr = 0x%08lX\n", addr);
- load_addr = addr;
- }
+ printf ("## Ready for binary (kermit) download "
+ "to 0x%08lX at %d bps...\n",
+ offset,
+ load_baudrate);
+ addr = load_serial_bin (offset);
+
+ if (addr == ~0) {
+ load_addr = 0;
+ printf ("## Binary (kermit) download aborted\n");
+ rcode = 1;
+ } else {
+ printf ("## Start Addr = 0x%08lX\n", addr);
+ load_addr = addr;
+ }
+ }
if (load_baudrate != current_baudrate) {
printf ("## Switch baudrate to %d bps and press ESC ...\n",
current_baudrate);
@@ -963,6 +971,66 @@
}
return ((ulong) os_data_addr - (ulong) bin_start_address);
}
+
+static int getcxmodem(void) {
+ if (tstc())
+ return (getc());
+ return -1;
+}
+static ulong load_serial_ymodem (ulong offset)
+{
+ int size;
+ char buf[32];
+ int err;
+ int res;
+ connection_info_t info;
+ char ymodemBuf[1024];
+ ulong store_addr = ~0;
+ ulong addr = 0;
+
+ size=0;
+ info.mode=xyzModem_ymodem;
+ res=xyzModem_stream_open(&info, &err);
+ if (!res) {
+
+ while ((res=xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0 ){
+ store_addr = addr + offset;
+ size+=res;
+ addr+=res;
+#ifndef CFG_NO_FLASH
+ if (addr2info(store_addr)) {
+ int rc;
+
+ rc = flash_write((char *)ymodemBuf,store_addr,res);
+ if (rc != 0) {
+ flash_perror (rc);
+ return (~0);
+ }
+ } else
+#endif
+ {
+ memcpy ((char *)(store_addr), ymodemBuf, res);
+ }
+
+ }
+ }
+ else {
+ printf ("%s\n",xyzModem_error(err));
+ }
+
+ xyzModem_stream_close(&err);
+ xyzModem_stream_terminate(false,&getcxmodem);
+
+
+ flush_cache (offset, size);
+
+ printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
+ sprintf(buf, "%X", size);
+ setenv("filesize", buf);
+
+ return offset;
+}
+
#endif /* CFG_CMD_LOADB */
/* -------------------------------------------------------------------- */
@@ -1022,6 +1090,14 @@
" with offset 'off' and baudrate 'baud'\n"
);
+U_BOOT_CMD(
+ loady, 3, 0, do_load_serial_bin,
+ "loady - load binary file over serial line (ymodem mode)\n",
+ "[ off ] [ baud ]\n"
+ " - load binary file over serial line"
+ " with offset 'off' and baudrate 'baud'\n"
+);
+
#endif /* CFG_CMD_LOADB */
/* -------------------------------------------------------------------- */
diff --git a/common/cmd_log.c b/common/cmd_log.c
index efc9689..042a403 100644
--- a/common/cmd_log.c
+++ b/common/cmd_log.c
@@ -46,6 +46,8 @@
#include <post.h>
#include <logbuff.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_LOGBUFFER)
/* Local prototypes */
@@ -73,7 +75,6 @@
in linux/kernel/printk */
void logbuff_init_ptrs (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned long *ext_tag;
unsigned long post_word;
char *s;
@@ -139,8 +140,6 @@
void logbuff_log(char *msg)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if ((gd->post_log_word & LOGBUFF_INITIALIZED)) {
logbuff_printk (msg);
} else {
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index ecf1db4..6257fbd 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -50,6 +50,8 @@
#include <net.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#if !defined(CFG_ENV_IS_IN_NVRAM) && \
!defined(CFG_ENV_IS_IN_EEPROM) && \
!defined(CFG_ENV_IS_IN_FLASH) && \
@@ -152,8 +154,6 @@
int _do_setenv (int flag, int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i, len, oldval;
int console = -1;
uchar *env, *nxt = NULL;
diff --git a/common/console.c b/common/console.c
index 3c535d2..e9f23be 100644
--- a/common/console.c
+++ b/common/console.c
@@ -27,6 +27,8 @@
#include <console.h>
#include <exports.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_AMIGAONEG3SE
int console_changed = 0;
#endif
@@ -48,7 +50,6 @@
static int console_setfile (int file, device_t * dev)
{
- DECLARE_GLOBAL_DATA_PTR;
int error = 0;
if (dev == NULL)
@@ -161,8 +162,6 @@
int getc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->flags & GD_FLG_DEVINIT) {
/* Get from the standard input */
return fgetc (stdin);
@@ -174,8 +173,6 @@
int tstc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->flags & GD_FLG_DEVINIT) {
/* Test the standard input */
return ftstc (stdin);
@@ -187,8 +184,6 @@
void putc (const char c)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#ifdef CONFIG_SILENT_CONSOLE
if (gd->flags & GD_FLG_SILENT)
return;
@@ -205,8 +200,6 @@
void puts (const char *s)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#ifdef CONFIG_SILENT_CONSOLE
if (gd->flags & GD_FLG_SILENT)
return;
@@ -258,8 +251,6 @@
static int ctrlc_was_pressed = 0;
int ctrlc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (!ctrlc_disabled && gd->have_console) {
if (tstc ()) {
switch (getc ()) {
@@ -370,8 +361,6 @@
/* Called before relocation - use serial functions */
int console_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->have_console = 1;
#ifdef CONFIG_SILENT_CONSOLE
@@ -407,7 +396,6 @@
/* Called after the relocation - use desired console functions */
int console_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
char *stdinname, *stdoutname, *stderrname;
device_t *inputdev = NULL, *outputdev = NULL, *errdev = NULL;
#ifdef CFG_CONSOLE_ENV_OVERWRITE
@@ -499,8 +487,6 @@
/* Called after the relocation - use desired console functions */
int console_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
device_t *inputdev = NULL, *outputdev = NULL;
int i, items = ListNumItems (devlist);
diff --git a/common/crc16.c b/common/crc16.c
new file mode 100644
index 0000000..d571405
--- /dev/null
+++ b/common/crc16.c
@@ -0,0 +1,106 @@
+//==========================================================================
+//
+// crc16.c
+//
+// 16 bit CRC with polynomial x^16+x^12+x^5+1
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+// Copyright (C) 2002 Gary Thomas
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): gthomas
+// Contributors: gthomas,asl
+// Date: 2001-01-31
+// Purpose:
+// Description:
+//
+// This code is part of eCos (tm).
+//
+//####DESCRIPTIONEND####
+//
+//==========================================================================
+
+#include "crc.h"
+
+// Table of CRC constants - implements x^16+x^12+x^5+1
+static const uint16_t crc16_tab[] = {
+ 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
+ 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
+ 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
+ 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
+ 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
+ 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
+ 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
+ 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
+ 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
+ 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
+ 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
+ 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
+ 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
+ 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
+ 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
+ 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
+ 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
+ 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
+ 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
+ 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
+ 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
+ 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
+ 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
+ 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
+ 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
+ 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
+ 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
+ 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
+ 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
+ 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
+ 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
+ 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
+};
+
+uint16_t
+cyg_crc16(unsigned char *buf, int len)
+{
+ int i;
+ uint16_t cksum;
+
+ cksum = 0;
+ for (i = 0; i < len; i++) {
+ cksum = crc16_tab[((cksum>>8) ^ *buf++) & 0xFF] ^ (cksum << 8);
+ }
+ return cksum;
+}
+
diff --git a/common/devices.c b/common/devices.c
index bd4dfa0..ddf8f8e 100644
--- a/common/devices.c
+++ b/common/devices.c
@@ -34,6 +34,8 @@
#include <i2c.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
list_t devlist = 0;
device_t *stdio_devices[] = { NULL, NULL, NULL };
char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
@@ -160,8 +162,6 @@
int devices_init (void)
{
#ifndef CONFIG_ARM /* already relocated for current ARM implementation */
- DECLARE_GLOBAL_DATA_PTR;
-
ulong relocation_offset = gd->reloc_off;
int i;
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index 0c04872..20c2069 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -949,6 +949,8 @@
#endif /* 0 */ /* Moved to malloc.h */
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
Emulation of sbrk for WIN32
All code within the ifdef WIN32 is untested by me.
@@ -1493,8 +1495,6 @@
void malloc_bin_reloc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long *p = (unsigned long *)(&av_[2]);
int i;
for (i=2; i<(sizeof(av_)/sizeof(mbinptr)); ++i) {
diff --git a/common/env_common.c b/common/env_common.c
index 3201135..eb33422 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -37,6 +37,8 @@
# define SHOW_BOOT_PROGRESS(arg)
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_AMIGAONEG3SE
extern void enable_nvram(void);
extern void disable_nvram(void);
@@ -150,7 +152,6 @@
static uchar env_get_char_init (int index)
{
- DECLARE_GLOBAL_DATA_PTR;
uchar c;
/* if crc was bad, use the default environment */
@@ -167,7 +168,6 @@
#ifdef CONFIG_AMIGAONEG3SE
uchar env_get_char_memory (int index)
{
- DECLARE_GLOBAL_DATA_PTR;
uchar retval;
enable_nvram();
if (gd->env_valid) {
@@ -181,8 +181,6 @@
#else
uchar env_get_char_memory (int index)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->env_valid) {
return ( *((uchar *)(gd->env_addr + index)) );
} else {
@@ -193,8 +191,6 @@
uchar *env_get_addr (int index)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->env_valid) {
return ( ((uchar *)(gd->env_addr + index)) );
} else {
@@ -204,8 +200,6 @@
void env_relocate (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__,
gd->reloc_off);
diff --git a/common/env_dataflash.c b/common/env_dataflash.c
index 8834da0..93fff29 100644
--- a/common/env_dataflash.c
+++ b/common/env_dataflash.c
@@ -26,6 +26,8 @@
#include <linux/stddef.h>
#include <dataflash.h>
+DECLARE_GLOBAL_DATA_PTR;
+
env_t *env_ptr = NULL;
char * env_name_spec = "dataflash";
@@ -68,8 +70,6 @@
*/
int env_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong crc, len, new;
unsigned off;
uchar buf[64];
diff --git a/common/env_eeprom.c b/common/env_eeprom.c
index 50c623e..2adc129 100644
--- a/common/env_eeprom.c
+++ b/common/env_eeprom.c
@@ -32,6 +32,8 @@
#include <environment.h>
#include <linux/stddef.h>
+DECLARE_GLOBAL_DATA_PTR;
+
env_t *env_ptr = NULL;
char * env_name_spec = "EEPROM";
@@ -75,8 +77,6 @@
*/
int env_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong crc, len, new;
unsigned off;
uchar buf[64];
diff --git a/common/env_flash.c b/common/env_flash.c
index a2ea9c4..1674b30 100644
--- a/common/env_flash.c
+++ b/common/env_flash.c
@@ -35,6 +35,8 @@
#include <linux/stddef.h>
#include <malloc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if ((CONFIG_COMMANDS&(CFG_CMD_ENV|CFG_CMD_FLASH)) == (CFG_CMD_ENV|CFG_CMD_FLASH))
#define CMD_SAVEENV
#elif defined(CFG_ENV_ADDR_REDUND)
@@ -89,8 +91,6 @@
uchar env_get_char_spec (int index)
{
- DECLARE_GLOBAL_DATA_PTR;
-
return ( *((uchar *)(gd->env_addr + index)) );
}
@@ -98,7 +98,6 @@
int env_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
int crc1_ok = 0, crc2_ok = 0;
uchar flag1 = flash_addr->flags;
@@ -260,7 +259,6 @@
int env_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_OMAP2420H4
int flash_probe(void);
@@ -358,8 +356,6 @@
{
#if !defined(ENV_IS_EMBEDDED) || defined(CFG_ENV_ADDR_REDUND)
#ifdef CFG_ENV_ADDR_REDUND
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->env_addr != (ulong)&(flash_addr->data)) {
env_t * etmp = flash_addr;
ulong ltmp = end_addr;
diff --git a/common/env_nand.c b/common/env_nand.c
index dd27f7b..0a05b09 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -36,21 +36,19 @@
#include <command.h>
#include <environment.h>
#include <linux/stddef.h>
+#include <malloc.h>
#include <nand.h>
#if ((CONFIG_COMMANDS&(CFG_CMD_ENV|CFG_CMD_NAND)) == (CFG_CMD_ENV|CFG_CMD_NAND))
#define CMD_SAVEENV
+#elif defined(CFG_ENV_OFFSET_REDUND)
+#error Cannot use CFG_ENV_OFFSET_REDUND without CFG_CMD_ENV & CFG_CMD_NAND
#endif
-#if defined(CFG_ENV_SIZE_REDUND)
-#error CFG_ENV_SIZE_REDUND not supported yet
+#if defined(CFG_ENV_SIZE_REDUND) && (CFG_ENV_SIZE_REDUND != CFG_ENV_SIZE)
+#error CFG_ENV_SIZE_REDUND should be the same as CFG_ENV_SIZE
#endif
-#if defined(CFG_ENV_ADDR_REDUND)
-#error CFG_ENV_ADDR_REDUND and CFG_ENV_IS_IN_NAND not supported yet
-#endif
-
-
#ifdef CONFIG_INFERNO
#error CONFIG_INFERNO not supported yet
#endif
@@ -80,11 +78,10 @@
/* local functions */
static void use_default(void);
+DECLARE_GLOBAL_DATA_PTR;
uchar env_get_char_spec (int index)
{
- DECLARE_GLOBAL_DATA_PTR;
-
return ( *((uchar *)(gd->env_addr + index)) );
}
@@ -97,9 +94,7 @@
*/
int env_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
- gd->env_addr = (ulong)&default_environment[0];
+ gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = 1;
return (0);
@@ -110,6 +105,41 @@
* The legacy NAND code saved the environment in the first NAND device i.e.,
* nand_dev_desc + 0. This is also the behaviour using the new NAND code.
*/
+#ifdef CFG_ENV_OFFSET_REDUND
+int saveenv(void)
+{
+ ulong total;
+ int ret = 0;
+
+ env_ptr->flags++;
+ total = CFG_ENV_SIZE;
+
+ if(gd->env_valid == 1) {
+ puts ("Erasing redundant Nand...");
+ if (nand_erase(&nand_info[0],
+ CFG_ENV_OFFSET_REDUND, CFG_ENV_SIZE))
+ return 1;
+ puts ("Writing to redundant Nand... ");
+ ret = nand_write(&nand_info[0], CFG_ENV_OFFSET_REDUND, &total,
+ (u_char*) env_ptr);
+ } else {
+ puts ("Erasing Nand...");
+ if (nand_erase(&nand_info[0],
+ CFG_ENV_OFFSET, CFG_ENV_SIZE))
+ return 1;
+
+ puts ("Writing to Nand... ");
+ ret = nand_write(&nand_info[0], CFG_ENV_OFFSET, &total,
+ (u_char*) env_ptr);
+ }
+ if (ret || total != CFG_ENV_SIZE)
+ return 1;
+
+ puts ("done\n");
+ gd->env_valid = (gd->env_valid == 2 ? 1 : 2);
+ return ret;
+}
+#else /* ! CFG_ENV_OFFSET_REDUND */
int saveenv(void)
{
ulong total;
@@ -128,9 +158,63 @@
puts ("done\n");
return ret;
}
+#endif /* CFG_ENV_OFFSET_REDUND */
#endif /* CMD_SAVEENV */
+#ifdef CFG_ENV_OFFSET_REDUND
+void env_relocate_spec (void)
+{
+#if !defined(ENV_IS_EMBEDDED)
+ ulong total;
+ int crc1_ok = 0, crc2_ok = 0;
+ env_t *tmp_env1, *tmp_env2;
+ total = CFG_ENV_SIZE;
+
+ tmp_env1 = (env_t *) malloc(CFG_ENV_SIZE);
+ tmp_env2 = (env_t *) malloc(CFG_ENV_SIZE);
+
+ nand_read(&nand_info[0], CFG_ENV_OFFSET, &total,
+ (u_char*) tmp_env1);
+ nand_read(&nand_info[0], CFG_ENV_OFFSET_REDUND, &total,
+ (u_char*) tmp_env2);
+
+ crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc);
+ crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
+
+ if(!crc1_ok && !crc2_ok)
+ return use_default();
+ else if(crc1_ok && !crc2_ok)
+ gd->env_valid = 1;
+ else if(!crc1_ok && crc2_ok)
+ gd->env_valid = 2;
+ else {
+ /* both ok - check serial */
+ if(tmp_env1->flags == 255 && tmp_env2->flags == 0)
+ gd->env_valid = 2;
+ else if(tmp_env2->flags == 255 && tmp_env1->flags == 0)
+ gd->env_valid = 1;
+ else if(tmp_env1->flags > tmp_env2->flags)
+ gd->env_valid = 1;
+ else if(tmp_env2->flags > tmp_env1->flags)
+ gd->env_valid = 2;
+ else /* flags are equal - almost impossible */
+ gd->env_valid = 1;
+
+ }
+
+ free(env_ptr);
+ if(gd->env_valid == 1) {
+ env_ptr = tmp_env1;
+ free(tmp_env2);
+ } else {
+ env_ptr = tmp_env2;
+ free(tmp_env1);
+ }
+
+#endif /* ! ENV_IS_EMBEDDED */
+}
+#else /* ! CFG_ENV_OFFSET_REDUND */
/*
* The legacy NAND code saved the environment in the first NAND device i.e.,
* nand_dev_desc + 0. This is also the behaviour using the new NAND code.
@@ -149,16 +233,14 @@
if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc)
return use_default();
#endif /* ! ENV_IS_EMBEDDED */
-
}
+#endif /* CFG_ENV_OFFSET_REDUND */
static void use_default()
{
- DECLARE_GLOBAL_DATA_PTR;
-
puts ("*** Warning - bad CRC or NAND, using default environment\n\n");
- if (default_environment_size > CFG_ENV_SIZE){
+ if (default_environment_size > CFG_ENV_SIZE){
puts ("*** Error - default environment is too large\n\n");
return;
}
@@ -168,7 +250,7 @@
default_environment,
default_environment_size);
env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE);
- gd->env_valid = 1;
+ gd->env_valid = 1;
}
diff --git a/common/env_nowhere.c b/common/env_nowhere.c
index ee4237c..17ecc77 100644
--- a/common/env_nowhere.c
+++ b/common/env_nowhere.c
@@ -32,6 +32,8 @@
#include <environment.h>
#include <linux/stddef.h>
+DECLARE_GLOBAL_DATA_PTR;
+
env_t *env_ptr = NULL;
extern uchar default_environment[];
@@ -44,8 +46,6 @@
uchar env_get_char_spec (int index)
{
- DECLARE_GLOBAL_DATA_PTR;
-
return ( *((uchar *)(gd->env_addr + index)) );
}
@@ -56,8 +56,6 @@
*/
int env_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = 0;
diff --git a/common/env_nvram.c b/common/env_nvram.c
index a406e42..7c18896 100644
--- a/common/env_nvram.c
+++ b/common/env_nvram.c
@@ -42,6 +42,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CFG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */
#include <command.h>
@@ -74,7 +76,6 @@
return c;
#else
- DECLARE_GLOBAL_DATA_PTR;
uchar retval;
enable_nvram();
retval = *((uchar *)(gd->env_addr + index));
@@ -92,8 +93,6 @@
return c;
#else
- DECLARE_GLOBAL_DATA_PTR;
-
return *((uchar *)(gd->env_addr + index));
#endif
}
@@ -135,7 +134,6 @@
*/
int env_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_AMIGAONEG3SE
enable_nvram();
#endif
diff --git a/common/exports.c b/common/exports.c
index 9858217..ef25338 100644
--- a/common/exports.c
+++ b/common/exports.c
@@ -1,6 +1,8 @@
#include <common.h>
#include <exports.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static void dummy(void)
{
}
@@ -12,7 +14,6 @@
void jumptable_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
int i;
gd->jt = (void **) malloc (XF_MAX * sizeof (void *));
diff --git a/common/hush.c b/common/hush.c
index bb5041a..feb5627 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -138,6 +138,8 @@
#endif
#ifdef __U_BOOT__
+DECLARE_GLOBAL_DATA_PTR;
+
#define EXIT_SUCCESS 0
#define EOF -1
#define syntax() syntax_err()
@@ -3272,7 +3274,6 @@
#ifdef __U_BOOT__
static void u_boot_hush_reloc(void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned long addr;
struct reserved_combo *r;
diff --git a/common/lcd.c b/common/lcd.c
index e64972f..0be1912 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -50,7 +50,6 @@
#include <lcdvideo.h>
#endif
-
#ifdef CONFIG_LCD
/************************************************************************/
@@ -68,6 +67,8 @@
# endif
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
ulong lcd_setmem (ulong addr);
static void lcd_drawchars (ushort x, ushort y, uchar *str, int count);
@@ -339,8 +340,6 @@
int drv_lcd_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
device_t lcddev;
int rc;
@@ -682,8 +681,6 @@
static void *lcd_logo (void)
{
#ifdef CONFIG_LCD_INFO
- DECLARE_GLOBAL_DATA_PTR;
-
char info[80];
char temp[32];
#endif /* CONFIG_LCD_INFO */
diff --git a/common/lynxkdi.c b/common/lynxkdi.c
index ed1b595..76a271b 100644
--- a/common/lynxkdi.c
+++ b/common/lynxkdi.c
@@ -20,13 +20,14 @@
#if defined(CONFIG_LYNXKDI)
#include <lynxkdi.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_MPC8260) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
void lynxkdi_boot ( image_header_t *hdr )
{
void (*lynxkdi)(void) = (void(*)(void)) ntohl(hdr->ih_ep);
lynxos_bootparms_t *parms = (lynxos_bootparms_t *)0x0020;
bd_t *kbd;
- DECLARE_GLOBAL_DATA_PTR;
u32 *psz = (u32 *)(ntohl(hdr->ih_load) + 0x0204);
memset( parms, 0, sizeof(*parms));
diff --git a/common/main.c b/common/main.c
index 445cb18..758ef8d 100644
--- a/common/main.c
+++ b/common/main.c
@@ -36,6 +36,10 @@
#include <post.h>
+#ifdef CONFIG_SILENT_CONSOLE
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
#if defined(CONFIG_BOOT_RETRY_TIME) && defined(CONFIG_RESET_TO_RETRY)
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* for do_reset() prototype */
#endif
@@ -105,14 +109,10 @@
u_int i;
#ifdef CONFIG_SILENT_CONSOLE
- {
- DECLARE_GLOBAL_DATA_PTR;
-
- if (gd->flags & GD_FLG_SILENT) {
- /* Restore serial console */
- console_assign (stdout, "serial");
- console_assign (stderr, "serial");
- }
+ if (gd->flags & GD_FLG_SILENT) {
+ /* Restore serial console */
+ console_assign (stdout, "serial");
+ console_assign (stderr, "serial");
}
#endif
@@ -195,17 +195,13 @@
# endif
#ifdef CONFIG_SILENT_CONSOLE
- {
- DECLARE_GLOBAL_DATA_PTR;
-
- if (abort) {
- /* permanently enable normal console output */
- gd->flags &= ~(GD_FLG_SILENT);
- } else if (gd->flags & GD_FLG_SILENT) {
- /* Restore silent console */
- console_assign (stdout, "nulldev");
- console_assign (stderr, "nulldev");
- }
+ if (abort) {
+ /* permanently enable normal console output */
+ gd->flags &= ~(GD_FLG_SILENT);
+ } else if (gd->flags & GD_FLG_SILENT) {
+ /* Restore silent console */
+ console_assign (stdout, "nulldev");
+ console_assign (stderr, "nulldev");
}
#endif
@@ -223,14 +219,10 @@
int abort = 0;
#ifdef CONFIG_SILENT_CONSOLE
- {
- DECLARE_GLOBAL_DATA_PTR;
-
- if (gd->flags & GD_FLG_SILENT) {
- /* Restore serial console */
- console_assign (stdout, "serial");
- console_assign (stderr, "serial");
- }
+ if (gd->flags & GD_FLG_SILENT) {
+ /* Restore serial console */
+ console_assign (stdout, "serial");
+ console_assign (stderr, "serial");
}
#endif
@@ -279,17 +271,13 @@
putc ('\n');
#ifdef CONFIG_SILENT_CONSOLE
- {
- DECLARE_GLOBAL_DATA_PTR;
-
- if (abort) {
- /* permanently enable normal console output */
- gd->flags &= ~(GD_FLG_SILENT);
- } else if (gd->flags & GD_FLG_SILENT) {
- /* Restore silent console */
- console_assign (stdout, "nulldev");
- console_assign (stderr, "nulldev");
- }
+ if (abort) {
+ /* permanently enable normal console output */
+ gd->flags &= ~(GD_FLG_SILENT);
+ } else if (gd->flags & GD_FLG_SILENT) {
+ /* Restore silent console */
+ console_assign (stdout, "nulldev");
+ console_assign (stderr, "nulldev");
}
#endif
diff --git a/common/serial.c b/common/serial.c
index 22d8fd0..2acbd08 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -25,6 +25,8 @@
#include <serial.h>
#include <devices.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_SERIAL_MULTI)
static struct serial_device *serial_devices = NULL;
@@ -49,8 +51,6 @@
static int serial_register (struct serial_device *dev)
{
- DECLARE_GLOBAL_DATA_PTR;
-
dev->init += gd->reloc_off;
dev->setbrg += gd->reloc_off;
dev->getc += gd->reloc_off;
@@ -131,8 +131,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
struct serial_device *dev = default_serial_console ();
@@ -144,8 +142,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
struct serial_device *dev = default_serial_console ();
@@ -158,8 +154,6 @@
int serial_getc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
struct serial_device *dev = default_serial_console ();
@@ -171,8 +165,6 @@
int serial_tstc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
struct serial_device *dev = default_serial_console ();
@@ -184,8 +176,6 @@
void serial_putc (const char c)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
struct serial_device *dev = default_serial_console ();
@@ -198,8 +188,6 @@
void serial_puts (const char *s)
{
- DECLARE_GLOBAL_DATA_PTR;
-
if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
struct serial_device *dev = default_serial_console ();
diff --git a/common/soft_i2c.c b/common/soft_i2c.c
index b3642da..bffcd44 100644
--- a/common/soft_i2c.c
+++ b/common/soft_i2c.c
@@ -39,6 +39,10 @@
/* #define DEBUG_I2C */
+#ifdef DEBUG_I2C
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/*-----------------------------------------------------------------------
* Definitions
@@ -53,7 +57,6 @@
#ifdef DEBUG_I2C
#define PRINTD(fmt,args...) do { \
- DECLARE_GLOBAL_DATA_PTR; \
if (gd->have_console) \
printf (fmt ,##args); \
} while (0)
diff --git a/common/xyzModem.c b/common/xyzModem.c
new file mode 100644
index 0000000..3c86b13
--- /dev/null
+++ b/common/xyzModem.c
@@ -0,0 +1,739 @@
+//==========================================================================
+//
+// xyzModem.c
+//
+// RedBoot stream handler for xyzModem protocol
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+// Copyright (C) 2002 Gary Thomas
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): gthomas
+// Contributors: gthomas, tsmith, Yoshinori Sato
+// Date: 2000-07-14
+// Purpose:
+// Description:
+//
+// This code is part of RedBoot (tm).
+//
+//####DESCRIPTIONEND####
+//
+//==========================================================================
+#include <common.h>
+#include <xyzModem.h>
+#include <stdarg.h>
+#include <crc.h>
+
+// Assumption - run xyzModem protocol over the console port
+
+// Values magic to the protocol
+#define SOH 0x01
+#define STX 0x02
+#define EOT 0x04
+#define ACK 0x06
+#define BSP 0x08
+#define NAK 0x15
+#define CAN 0x18
+#define EOF 0x1A // ^Z for DOS officionados
+
+#define USE_YMODEM_LENGTH
+
+// Data & state local to the protocol
+static struct {
+#ifdef REDBOOT
+ hal_virtual_comm_table_t* __chan;
+#else
+ int *__chan;
+#endif
+ unsigned char pkt[1024], *bufp;
+ unsigned char blk,cblk,crc1,crc2;
+ unsigned char next_blk; // Expected block
+ int len, mode, total_retries;
+ int total_SOH, total_STX, total_CAN;
+ bool crc_mode, at_eof, tx_ack;
+#ifdef USE_YMODEM_LENGTH
+ unsigned long file_length, read_length;
+#endif
+} xyz;
+
+#define xyzModem_CHAR_TIMEOUT 2000 // 2 seconds
+#define xyzModem_MAX_RETRIES 20
+#define xyzModem_MAX_RETRIES_WITH_CRC 10
+#define xyzModem_CAN_COUNT 3 // Wait for 3 CAN before quitting
+
+
+#ifndef REDBOOT //SB
+typedef int cyg_int32;
+int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) {
+#define DELAY 20
+ unsigned long counter=0;
+ while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) {
+ udelay(DELAY);
+ counter++;
+ }
+ if (tstc()) {
+ *c=getc();
+ return 1;
+ }
+ return 0;
+}
+
+void CYGACC_COMM_IF_PUTC(char x,char y) {
+ putc(y);
+}
+
+// Validate a hex character
+__inline__ static bool
+_is_hex(char c)
+{
+ return (((c >= '0') && (c <= '9')) ||
+ ((c >= 'A') && (c <= 'F')) ||
+ ((c >= 'a') && (c <= 'f')));
+}
+
+// Convert a single hex nibble
+__inline__ static int
+_from_hex(char c)
+{
+ int ret = 0;
+
+ if ((c >= '0') && (c <= '9')) {
+ ret = (c - '0');
+ } else if ((c >= 'a') && (c <= 'f')) {
+ ret = (c - 'a' + 0x0a);
+ } else if ((c >= 'A') && (c <= 'F')) {
+ ret = (c - 'A' + 0x0A);
+ }
+ return ret;
+}
+
+// Convert a character to lower case
+__inline__ static char
+_tolower(char c)
+{
+ if ((c >= 'A') && (c <= 'Z')) {
+ c = (c - 'A') + 'a';
+ }
+ return c;
+}
+
+
+
+//
+// Parse (scan) a number
+//
+bool
+parse_num(char *s, unsigned long *val, char **es, char *delim)
+{
+ bool first = true;
+ int radix = 10;
+ char c;
+ unsigned long result = 0;
+ int digit;
+
+ while (*s == ' ') s++;
+ while (*s) {
+ if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) {
+ radix = 16;
+ s += 2;
+ }
+ first = false;
+ c = *s++;
+ if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) {
+ // Valid digit
+#ifdef CYGPKG_HAL_MIPS
+ // FIXME: tx49 compiler generates 0x2539018 for MUL which
+ // isn't any good.
+ if (16 == radix)
+ result = result << 4;
+ else
+ result = 10 * result;
+ result += digit;
+#else
+ result = (result * radix) + digit;
+#endif
+ } else {
+ if (delim != (char *)0) {
+ // See if this character is one of the delimiters
+ char *dp = delim;
+ while (*dp && (c != *dp)) dp++;
+ if (*dp) break; // Found a good delimiter
+ }
+ return false; // Malformatted number
+ }
+ }
+ *val = result;
+ if (es != (char **)0) {
+ *es = s;
+ }
+ return true;
+}
+
+#endif
+
+#define USE_SPRINTF
+#ifdef DEBUG
+#ifndef USE_SPRINTF
+//
+// Note: this debug setup only works if the target platform has two serial ports
+// available so that the other one (currently only port 1) can be used for debug
+// messages.
+//
+static int
+zm_dprintf(char *fmt, ...)
+{
+ int cur_console;
+ va_list args;
+
+ va_start(args, fmt);
+#ifdef REDBOOT
+ cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
+#endif
+ diag_vprintf(fmt, args);
+#ifdef REDBOOT
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
+#endif
+}
+
+static void
+zm_flush(void)
+{
+}
+
+#else
+//
+// Note: this debug setup works by storing the strings in a fixed buffer
+//
+#define FINAL
+#ifdef FINAL
+static char *zm_out = (char *)0x00380000;
+static char *zm_out_start = (char *)0x00380000;
+#else
+static char zm_buf[8192];
+static char *zm_out=zm_buf;
+static char *zm_out_start = zm_buf;
+
+#endif
+static int
+zm_dprintf(char *fmt, ...)
+{
+ int len;
+ va_list args;
+
+ va_start(args, fmt);
+ len = diag_vsprintf(zm_out, fmt, args);
+ zm_out += len;
+ return len;
+}
+
+static void
+zm_flush(void)
+{
+ char *p = zm_out_start;
+#ifdef REDBOOT
+ while (*p) mon_write_char(*p++);
+#endif
+ zm_out = zm_out_start;
+}
+#endif
+
+static void
+zm_dump_buf(void *buf, int len)
+{
+#ifdef REDBOOT
+ diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
+#else
+
+#endif
+}
+
+static unsigned char zm_buf[2048];
+static unsigned char *zm_bp;
+
+static void
+zm_new(void)
+{
+ zm_bp = zm_buf;
+}
+
+static void
+zm_save(unsigned char c)
+{
+ *zm_bp++ = c;
+}
+
+static void
+zm_dump(int line)
+{
+ zm_dprintf("Packet at line: %d\n", line);
+ zm_dump_buf(zm_buf, zm_bp-zm_buf);
+}
+
+#define ZM_DEBUG(x) x
+#else
+#define ZM_DEBUG(x)
+#endif
+
+// Wait for the line to go idle
+static void
+xyzModem_flush(void)
+{
+ int res;
+ char c;
+ while (true) {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
+ if (!res) return;
+ }
+}
+
+static int
+xyzModem_get_hdr(void)
+{
+ char c;
+ int res;
+ bool hdr_found = false;
+ int i, can_total, hdr_chars;
+ unsigned short cksum;
+
+ ZM_DEBUG(zm_new());
+ // Find the start of a header
+ can_total = 0;
+ hdr_chars = 0;
+
+ if (xyz.tx_ack) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ xyz.tx_ack = false;
+ }
+ while (!hdr_found) {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
+ ZM_DEBUG(zm_save(c));
+ if (res) {
+ hdr_chars++;
+ switch (c) {
+ case SOH:
+ xyz.total_SOH++;
+ case STX:
+ if (c == STX) xyz.total_STX++;
+ hdr_found = true;
+ break;
+ case CAN:
+ xyz.total_CAN++;
+ ZM_DEBUG(zm_dump(__LINE__));
+ if (++can_total == xyzModem_CAN_COUNT) {
+ return xyzModem_cancel;
+ } else {
+ // Wait for multiple CAN to avoid early quits
+ break;
+ }
+ case EOT:
+ // EOT only supported if no noise
+ if (hdr_chars == 1) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__));
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_eof;
+ }
+ default:
+ // Ignore, waiting for start of header
+ ;
+ }
+ } else {
+ // Data stream timed out
+ xyzModem_flush(); // Toss any current input
+ ZM_DEBUG(zm_dump(__LINE__));
+ CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
+ return xyzModem_timeout;
+ }
+ }
+
+ // Header found, now read the data
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.blk);
+ ZM_DEBUG(zm_save(xyz.blk));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.cblk);
+ ZM_DEBUG(zm_save(xyz.cblk));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ xyz.len = (c == SOH) ? 128 : 1024;
+ xyz.bufp = xyz.pkt;
+ for (i = 0; i < xyz.len; i++) {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
+ ZM_DEBUG(zm_save(c));
+ if (res) {
+ xyz.pkt[i] = c;
+ } else {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ }
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc1);
+ ZM_DEBUG(zm_save(xyz.crc1));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ if (xyz.crc_mode) {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc2);
+ ZM_DEBUG(zm_save(xyz.crc2));
+ if (!res) {
+ ZM_DEBUG(zm_dump(__LINE__));
+ return xyzModem_timeout;
+ }
+ }
+ ZM_DEBUG(zm_dump(__LINE__));
+ // Validate the message
+ if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
+ ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk)));
+ ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
+ xyzModem_flush();
+ return xyzModem_frame;
+ }
+ // Verify checksum/CRC
+ if (xyz.crc_mode) {
+ cksum = cyg_crc16(xyz.pkt, xyz.len);
+ if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
+ ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n",
+ xyz.crc1, xyz.crc2, cksum & 0xFFFF));
+ return xyzModem_cksum;
+ }
+ } else {
+ cksum = 0;
+ for (i = 0; i < xyz.len; i++) {
+ cksum += xyz.pkt[i];
+ }
+ if (xyz.crc1 != (cksum & 0xFF)) {
+ ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF));
+ return xyzModem_cksum;
+ }
+ }
+ // If we get here, the message passes [structural] muster
+ return 0;
+}
+
+int
+xyzModem_stream_open(connection_info_t *info, int *err)
+{
+ int console_chan, stat=0;
+ int retries = xyzModem_MAX_RETRIES;
+ int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
+
+// ZM_DEBUG(zm_out = zm_out_start);
+#ifdef xyzModem_zmodem
+ if (info->mode == xyzModem_zmodem) {
+ *err = xyzModem_noZmodem;
+ return -1;
+ }
+#endif
+
+#ifdef REDBOOT
+ // Set up the I/O channel. Note: this allows for using a different port in the future
+ console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ if (info->chan >= 0) {
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
+ } else {
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
+ }
+ xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
+
+ CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
+ CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT);
+#else
+// TODO: CHECK !
+ int dummy;
+ xyz.__chan=&dummy;
+#endif
+ xyz.len = 0;
+ xyz.crc_mode = true;
+ xyz.at_eof = false;
+ xyz.tx_ack = false;
+ xyz.mode = info->mode;
+ xyz.total_retries = 0;
+ xyz.total_SOH = 0;
+ xyz.total_STX = 0;
+ xyz.total_CAN = 0;
+#ifdef USE_YMODEM_LENGTH
+ xyz.read_length = 0;
+ xyz.file_length = 0;
+#endif
+
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+
+ if (xyz.mode == xyzModem_xmodem) {
+ // X-modem doesn't have an information header - exit here
+ xyz.next_blk = 1;
+ return 0;
+ }
+
+ while (retries-- > 0) {
+ stat = xyzModem_get_hdr();
+ if (stat == 0) {
+ // Y-modem file information header
+ if (xyz.blk == 0) {
+#ifdef USE_YMODEM_LENGTH
+ // skip filename
+ while (*xyz.bufp++);
+ // get the length
+ parse_num(xyz.bufp, &xyz.file_length, NULL, " ");
+#endif
+ // The rest of the file name data block quietly discarded
+ xyz.tx_ack = true;
+ }
+ xyz.next_blk = 1;
+ xyz.len = 0;
+ return 0;
+ } else
+ if (stat == xyzModem_timeout) {
+ if (--crc_retries <= 0) xyz.crc_mode = false;
+ CYGACC_CALL_IF_DELAY_US(5*100000); // Extra delay for startup
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
+ }
+ if (stat == xyzModem_cancel) {
+ break;
+ }
+ }
+ *err = stat;
+ ZM_DEBUG(zm_flush());
+ return -1;
+}
+
+int
+xyzModem_stream_read(char *buf, int size, int *err)
+{
+ int stat, total, len;
+ int retries;
+
+ total = 0;
+ stat = xyzModem_cancel;
+ // Try and get 'size' bytes into the buffer
+ while (!xyz.at_eof && (size > 0)) {
+ if (xyz.len == 0) {
+ retries = xyzModem_MAX_RETRIES;
+ while (retries-- > 0) {
+ stat = xyzModem_get_hdr();
+ if (stat == 0) {
+ if (xyz.blk == xyz.next_blk) {
+ xyz.tx_ack = true;
+ ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__));
+ xyz.next_blk = (xyz.next_blk + 1) & 0xFF;
+
+#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
+ if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) {
+#else
+ if (1) {
+#endif
+ // Data blocks can be padded with ^Z (EOF) characters
+ // This code tries to detect and remove them
+ if ((xyz.bufp[xyz.len-1] == EOF) &&
+ (xyz.bufp[xyz.len-2] == EOF) &&
+ (xyz.bufp[xyz.len-3] == EOF)) {
+ while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) {
+ xyz.len--;
+ }
+ }
+ }
+
+#ifdef USE_YMODEM_LENGTH
+ // See if accumulated length exceeds that of the file.
+ // If so, reduce size (i.e., cut out pad bytes)
+ // Only do this for Y-modem (and Z-modem should it ever
+ // be supported since it can fall back to Y-modem mode).
+ if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) {
+ xyz.read_length += xyz.len;
+ if (xyz.read_length > xyz.file_length) {
+ xyz.len -= (xyz.read_length - xyz.file_length);
+ }
+ }
+#endif
+ break;
+ } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) {
+ // Just re-ACK this so sender will get on with it
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ continue; // Need new header
+ } else {
+ stat = xyzModem_sequence;
+ }
+ }
+ if (stat == xyzModem_cancel) {
+ break;
+ }
+ if (stat == xyzModem_eof) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__));
+ if (xyz.mode == xyzModem_ymodem) {
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG(zm_dprintf("Reading Final Header\n"));
+ stat = xyzModem_get_hdr();
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
+ ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__));
+ }
+ xyz.at_eof = true;
+ break;
+ }
+ CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
+ }
+ if (stat < 0) {
+ *err = stat;
+ xyz.len = -1;
+ return total;
+ }
+ }
+ // Don't "read" data from the EOF protocol package
+ if (!xyz.at_eof) {
+ len = xyz.len;
+ if (size < len) len = size;
+ memcpy(buf, xyz.bufp, len);
+ size -= len;
+ buf += len;
+ total += len;
+ xyz.len -= len;
+ xyz.bufp += len;
+ }
+ }
+ return total;
+}
+
+void
+xyzModem_stream_close(int *err)
+{
+ diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
+ xyz.crc_mode ? "CRC" : "Cksum",
+ xyz.total_SOH, xyz.total_STX, xyz.total_CAN,
+ xyz.total_retries);
+ ZM_DEBUG(zm_flush());
+}
+
+// Need to be able to clean out the input buffer, so have to take the
+// getc
+void xyzModem_stream_terminate(bool abort, int (*getc)(void))
+{
+ int c;
+
+ if (abort) {
+ ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
+ switch (xyz.mode) {
+ case xyzModem_xmodem:
+ case xyzModem_ymodem:
+ // The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal
+ // number of Backspaces is a friendly way to get the other end to abort.
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
+ CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
+ // Now consume the rest of what's waiting on the line.
+ ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
+ xyzModem_flush();
+ xyz.at_eof = true;
+ break;
+#ifdef xyzModem_zmodem
+ case xyzModem_zmodem:
+ // Might support it some day I suppose.
+#endif
+ break;
+ }
+ } else {
+ ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
+ // Consume any trailing crap left in the inbuffer from
+ // previous recieved blocks. Since very few files are an exact multiple
+ // of the transfer block size, there will almost always be some gunk here.
+ // If we don't eat it now, RedBoot will think the user typed it.
+ ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
+ while ((c = (*getc)()) > -1) ;
+ ZM_DEBUG(zm_dprintf("\n"));
+ // Make a small delay to give terminal programs like minicom
+ // time to get control again after their file transfer program
+ // exits.
+ CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
+ }
+}
+
+char *
+xyzModem_error(int err)
+{
+ switch (err) {
+ case xyzModem_access:
+ return "Can't access file";
+ break;
+ case xyzModem_noZmodem:
+ return "Sorry, zModem not available yet";
+ break;
+ case xyzModem_timeout:
+ return "Timed out";
+ break;
+ case xyzModem_eof:
+ return "End of file";
+ break;
+ case xyzModem_cancel:
+ return "Cancelled";
+ break;
+ case xyzModem_frame:
+ return "Invalid framing";
+ break;
+ case xyzModem_cksum:
+ return "CRC/checksum error";
+ break;
+ case xyzModem_sequence:
+ return "Block sequence error";
+ break;
+ default:
+ return "Unknown error";
+ break;
+ }
+}
+
+//
+// RedBoot interface
+//
+#if 0 // SB
+GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
+ xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
+RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
+RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
+#endif
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index 629ed66..706c880 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -49,6 +49,8 @@
#include "../board/MAI/AmigaOneG3SE/memio.h"
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
cpu_t
get_cpu_type(void)
{
@@ -111,8 +113,6 @@
#if !defined(CONFIG_BAB7xx)
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint type = get_cpu_type();
uint pvr = get_pvr();
ulong clock = gd->cpu_clk;
@@ -258,8 +258,6 @@
#ifdef CONFIG_AMIGAONEG3SE
unsigned long get_tbclk(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
return (gd->bus_clk / 4);
}
#else /* ! CONFIG_AMIGAONEG3SE */
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
index f94ff78..2dc5107 100644
--- a/cpu/74xx_7xx/speed.c
+++ b/cpu/74xx_7xx/speed.c
@@ -29,6 +29,8 @@
#include "../board/MAI/AmigaOneG3SE/via686.h"
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
static const int hid1_multipliers_x_10[] = {
25, /* 0000 - 2.5x */
75, /* 0001 - 7.5x */
@@ -85,7 +87,6 @@
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong clock = 0;
/* calculate the clock frequency based upon the CPU type */
diff --git a/cpu/74xx_7xx/traps.c b/cpu/74xx_7xx/traps.c
index ac5f8bf..50c5eeb 100644
--- a/cpu/74xx_7xx/traps.c
+++ b/cpu/74xx_7xx/traps.c
@@ -36,6 +36,10 @@
#include <command.h>
#include <asm/processor.h>
+#ifdef CONFIG_AMIGAONEG3SE
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
#endif
@@ -58,9 +62,6 @@
void
print_backtrace(unsigned long *sp)
{
-#ifdef CONFIG_AMIGAONEG3SE
- DECLARE_GLOBAL_DATA_PTR;
-#endif
int cnt = 0;
unsigned long i;
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index 85a4849..fa78eaa 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -37,6 +37,10 @@
#include <asm/arch/omap2420.h>
#endif
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1 (void)
{
@@ -88,8 +92,6 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c
index 0f99979..054bab9 100644
--- a/cpu/arm720t/serial.c
+++ b/cpu/arm720t/serial.c
@@ -34,10 +34,10 @@
#include <clps7111.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned int reg = 0;
switch (gd->baudrate) {
diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c
index 5ad98f0..bc6bf30 100644
--- a/cpu/arm720t/serial_netarm.c
+++ b/cpu/arm720t/serial_netarm.c
@@ -34,6 +34,8 @@
#include <asm/hardware.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
#if !defined(CONFIG_NETARM_NS7520)
#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
@@ -67,9 +69,6 @@
*/
void serial_setbrg (void)
{
- /* get the gd pointer */
- DECLARE_GLOBAL_DATA_PTR;
-
/* set 0 ... make sure pins are configured for serial */
#if !defined(CONFIG_NETARM_NS7520)
PORTA = PORTB =
diff --git a/cpu/arm920t/at91rm9200/serial.c b/cpu/arm920t/at91rm9200/serial.c
index a281932..d563445 100644
--- a/cpu/arm920t/at91rm9200/serial.c
+++ b/cpu/arm920t/at91rm9200/serial.c
@@ -33,6 +33,8 @@
#include <asm/io.h>
#include <asm/arch/hardware.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if !defined(CONFIG_DBGU) && !defined(CONFIG_USART0) && !defined(CONFIG_USART1)
#error must define one of CONFIG_DBGU or CONFIG_USART0 or CONFIG_USART1
#endif
@@ -50,7 +52,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
int baudrate;
if ((baudrate = gd->baudrate) <= 0)
diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c
index 2f7963d..f93bf57 100644
--- a/cpu/arm920t/cpu.c
+++ b/cpu/arm920t/cpu.c
@@ -33,6 +33,10 @@
#include <command.h>
#include <arm920t.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1 (void)
{
@@ -91,8 +95,6 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/arm920t/ks8695/serial.c b/cpu/arm920t/ks8695/serial.c
index 0dd91e7..aacd1be 100644
--- a/cpu/arm920t/ks8695/serial.c
+++ b/cpu/arm920t/ks8695/serial.c
@@ -25,6 +25,8 @@
#error "Bad: you didn't configure serial ..."
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Define the UART hardware register access structure.
*/
@@ -54,7 +56,6 @@
void serial_setbrg(void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
/* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/
diff --git a/cpu/arm920t/s3c24x0/serial.c b/cpu/arm920t/s3c24x0/serial.c
index 8327443..36851ad 100644
--- a/cpu/arm920t/s3c24x0/serial.c
+++ b/cpu/arm920t/s3c24x0/serial.c
@@ -27,6 +27,8 @@
#include <s3c2410.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_SERIAL1
#define UART_NR S3C24X0_UART0
@@ -48,7 +50,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
int i;
unsigned int reg = 0;
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 4603cf5..346f0d0 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -237,6 +237,7 @@
*/
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
cpu_init_crit:
/*
* flush v4 I/D caches
@@ -264,7 +265,7 @@
bl lowlevel_init
mov lr, ip
mov pc, lr
-
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
/*
*************************************************************************
diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c
index c1c6b03..d85b7fa 100644
--- a/cpu/arm925t/cpu.c
+++ b/cpu/arm925t/cpu.c
@@ -33,6 +33,10 @@
#include <command.h>
#include <arm925t.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1 (void)
{
@@ -91,8 +95,6 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c
index f57c5a5..722732e 100644
--- a/cpu/arm926ejs/cpu.c
+++ b/cpu/arm926ejs/cpu.c
@@ -33,6 +33,10 @@
#include <command.h>
#include <arm926ejs.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1 (void)
{
@@ -91,8 +95,6 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/arm946es/cpu.c b/cpu/arm946es/cpu.c
index ba0a4e4..4c63a8d 100644
--- a/cpu/arm946es/cpu.c
+++ b/cpu/arm946es/cpu.c
@@ -33,6 +33,10 @@
#include <command.h>
#include <arm946es.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1 (void)
{
@@ -91,8 +95,6 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/arm_intcm/cpu.c b/cpu/arm_intcm/cpu.c
index d03b09d..e2309f8 100644
--- a/cpu/arm_intcm/cpu.c
+++ b/cpu/arm_intcm/cpu.c
@@ -33,14 +33,16 @@
#include <common.h>
#include <command.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
int cpu_init (void)
{
/*
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c
index 84ae9d9..7b43ffd 100644
--- a/cpu/bf533/serial.c
+++ b/cpu/bf533/serial.c
@@ -51,6 +51,8 @@
#include <asm/uaccess.h>
#include "bf533_serial.h"
+DECLARE_GLOBAL_DATA_PTR;
+
unsigned long pll_div_fact;
void calc_baud(void)
@@ -72,7 +74,6 @@
void serial_setbrg(void)
{
int i;
- DECLARE_GLOBAL_DATA_PTR;
calc_baud();
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index 689e775..c83f0bb 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -36,6 +36,8 @@
#include <asm/pci.h>
#include <asm/ic/sc520.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* utility functions for boards based on the AMD sc520
*
@@ -93,8 +95,6 @@
void init_sc520(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Set the UARTxCTL register at it's slower,
* baud clock giving us a 1.8432 MHz reference
*/
@@ -139,7 +139,6 @@
unsigned long init_sc520_dram(void)
{
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
u32 dram_present=0;
diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c
index db13008..e7299a7 100644
--- a/cpu/i386/serial.c
+++ b/cpu/i386/serial.c
@@ -55,6 +55,8 @@
#include <malloc.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#define UART_RBR 0x00
#define UART_THR 0x00
#define UART_IER 0x01
@@ -126,13 +128,9 @@
int serial_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile char val;
-
int bdiv = serial_div(gd->baudrate);
-
outb(0x80, UART0_BASE + UART_LCR); /* set DLAB bit */
outb(bdiv, UART0_BASE + UART_DLL); /* set baudrate divisor */
outb(bdiv >> 8, UART0_BASE + UART_DLM);/* set baudrate divisor */
@@ -150,8 +148,6 @@
void serial_setbrg(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned short bdiv;
bdiv = serial_div(gd->baudrate);
@@ -410,8 +406,6 @@
#if (CONFIG_KGDB_SER_INDEX & 2)
void kgdb_serial_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile char val;
bdiv = serial_div (CONFIG_KGDB_BAUDRATE);
diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c
index 9383473..2a2bd50 100644
--- a/cpu/ixp/cpu.c
+++ b/cpu/ixp/cpu.c
@@ -34,14 +34,16 @@
#include <command.h>
#include <asm/arch/ixp425.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
int cpu_init (void)
{
/*
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c
index aea0cf8..2015958 100644
--- a/cpu/ixp/serial.c
+++ b/cpu/ixp/serial.c
@@ -31,10 +31,10 @@
#include <common.h>
#include <asm/arch/ixp425.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned int quot = 0;
int uart = CFG_IXP425_CONSOLE;
diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c
index 718f253..578eb73 100644
--- a/cpu/lh7a40x/cpu.c
+++ b/cpu/lh7a40x/cpu.c
@@ -33,6 +33,10 @@
#include <command.h>
#include <arm920t.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1 (void)
{
@@ -90,8 +94,6 @@
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/lh7a40x/serial.c b/cpu/lh7a40x/serial.c
index ff5b2d8..2132c05 100644
--- a/cpu/lh7a40x/serial.c
+++ b/cpu/lh7a40x/serial.c
@@ -21,6 +21,8 @@
#include <common.h>
#include <lh7a40x.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_CONSOLE_UART1)
# define UART_CONSOLE 1
#elif defined(CONFIG_CONSOLE_UART2)
@@ -33,7 +35,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
int i;
unsigned int reg = 0;
diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index c730922..79628d0 100644
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -38,6 +38,8 @@
#include <asm/m5249.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_M5249
#define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a))
#else
@@ -134,12 +136,10 @@
}
void serial_setbrg(void) {
- DECLARE_GLOBAL_DATA_PTR;
rs_serial_setbaudrate(0,gd->bd->bi_baudrate);
}
int serial_init(void) {
- DECLARE_GLOBAL_DATA_PTR;
rs_serial_init(0,gd->baudrate);
return 0;
}
diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c
index 519c992..ac860b2 100644
--- a/cpu/mcf52x2/speed.c
+++ b/cpu/mcf52x2/speed.c
@@ -24,13 +24,13 @@
#include <common.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* get_clocks() fills in gd->cpu_clock and gd->bus_clk
*/
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->cpu_clk = CFG_CLK;
#ifdef CONFIG_M5249
gd->bus_clk = gd->cpu_clk / 2;
diff --git a/cpu/mpc5xx/cpu.c b/cpu/mpc5xx/cpu.c
index 0c22a31..4bef90c 100644
--- a/cpu/mpc5xx/cpu.c
+++ b/cpu/mpc5xx/cpu.c
@@ -34,6 +34,7 @@
#include <command.h>
#include <mpc5xx.h>
+DECLARE_GLOBAL_DATA_PTR;
#if (defined(CONFIG_MPC555))
# define ID_STR "MPC555/556"
@@ -62,8 +63,6 @@
*/
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong clock = gd->cpu_clk;
uint immr = get_immr (0); /* Return full IMMR contents */
uint pvr = get_pvr (); /* Retrieve PVR register */
@@ -104,7 +103,6 @@
*/
unsigned long get_tbclk (void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (volatile immap_t *) CFG_IMMR;
ulong oscclk, factor;
diff --git a/cpu/mpc5xx/serial.c b/cpu/mpc5xx/serial.c
index 4868782..ac5556f 100644
--- a/cpu/mpc5xx/serial.c
+++ b/cpu/mpc5xx/serial.c
@@ -34,6 +34,7 @@
#include <command.h>
#include <mpc5xx.h>
+DECLARE_GLOBAL_DATA_PTR;
/*
* Local function prototypes
@@ -128,7 +129,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *)CFG_IMMR;
short scxbr;
diff --git a/cpu/mpc5xx/speed.c b/cpu/mpc5xx/speed.c
index f6097f5..6a1fa15 100644
--- a/cpu/mpc5xx/speed.c
+++ b/cpu/mpc5xx/speed.c
@@ -31,12 +31,13 @@
#include <mpc5xx.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Get cpu and bus clock
*/
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *) CFG_IMMR;
#ifndef CONFIG_5xx_GCLK_FREQ
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
index 2d695d1..563d5af 100644
--- a/cpu/mpc5xxx/cpu.c
+++ b/cpu/mpc5xxx/cpu.c
@@ -31,10 +31,10 @@
#include <mpc5xxx.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong clock = gd->cpu_clk;
char buf[32];
#ifndef CONFIG_MGT5100
@@ -94,8 +94,6 @@
*/
unsigned long get_tbclk (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong tbclk;
tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
index 3df0050..4a370ff 100644
--- a/cpu/mpc5xxx/cpu_init.c
+++ b/cpu/mpc5xxx/cpu_init.c
@@ -24,6 +24,8 @@
#include <common.h>
#include <mpc5xxx.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Breath some life into the CPU...
*
@@ -32,8 +34,6 @@
*/
void cpu_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long addecr = (1 << 25); /* Boot_CS */
#if defined(CFG_RAMBOOT) && defined(CONFIG_MGT5100)
addecr |= (1 << 22); /* SDRAM enable */
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 2e8e549..19737ce 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -14,6 +14,8 @@
#include "sdma.h"
#include "fec.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/* #define DEBUG 0x28 */
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
@@ -242,7 +244,6 @@
/********************************************************************/
static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
{
- DECLARE_GLOBAL_DATA_PTR;
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
@@ -393,7 +394,6 @@
/********************************************************************/
static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis)
{
- DECLARE_GLOBAL_DATA_PTR;
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c
index 044db46..0f02e78 100644
--- a/cpu/mpc5xxx/i2c.c
+++ b/cpu/mpc5xxx/i2c.c
@@ -23,6 +23,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_HARD_I2C
#include <mpc5xxx.h>
@@ -228,7 +230,6 @@
static int mpc_get_fdr(int speed)
{
- DECLARE_GLOBAL_DATA_PTR;
static int fdr = -1;
if (fdr == -1) {
diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c
index 1af794c..29b99f6 100644
--- a/cpu/mpc5xxx/ide.c
+++ b/cpu/mpc5xxx/ide.c
@@ -27,6 +27,8 @@
#ifdef CFG_CMD_IDE
#include <mpc5xxx.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define CALC_TIMING(t) (t + period - 1) / period
#ifdef CONFIG_IDE_RESET
@@ -35,7 +37,6 @@
int ide_preinit (void)
{
- DECLARE_GLOBAL_DATA_PTR;
long period, t0, t1, t2_8, t2_16, t4, ta;
vu_long reg;
struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA;
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index 91e1def..cacb9f0 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -33,6 +33,8 @@
#include <common.h>
#include <mpc5xxx.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_PSC_CONSOLE)
#if CONFIG_PSC_CONSOLE == 1
@@ -55,8 +57,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
unsigned long baseclk;
int div;
@@ -146,8 +146,6 @@
void
serial_setbrg(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
unsigned long baseclk, div;
diff --git a/cpu/mpc5xxx/speed.c b/cpu/mpc5xxx/speed.c
index 4f4e814..7847adc 100644
--- a/cpu/mpc5xxx/speed.c
+++ b/cpu/mpc5xxx/speed.c
@@ -25,6 +25,8 @@
#include <mpc5xxx.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/* Bus-to-Core Multipliers */
@@ -43,8 +45,6 @@
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong val, vco;
#if !defined(CFG_MPC5XXX_CLKIN)
@@ -81,8 +81,6 @@
int prt_mpc5xxx_clks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
printf(" Bus %ld MHz, IPB %ld MHz, PCI %ld MHz\n",
gd->bus_clk / 1000000, gd->ipb_clk / 1000000,
gd->pci_clk / 1000000);
diff --git a/cpu/mpc8220/cpu.c b/cpu/mpc8220/cpu.c
index 0cfe808..be274cd 100644
--- a/cpu/mpc8220/cpu.c
+++ b/cpu/mpc8220/cpu.c
@@ -31,10 +31,10 @@
#include <mpc8220.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong clock = gd->cpu_clk;
char buf[32];
@@ -81,8 +81,6 @@
*/
unsigned long get_tbclk (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong tbclk;
tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c
index 8c358a8..3cf5f66 100644
--- a/cpu/mpc8220/cpu_init.c
+++ b/cpu/mpc8220/cpu_init.c
@@ -24,6 +24,8 @@
#include <common.h>
#include <mpc8220.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Breath some life into the CPU...
*
@@ -32,8 +34,6 @@
*/
void cpu_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c
index 1d0d384..08e3172 100644
--- a/cpu/mpc8220/dramSetup.c
+++ b/cpu/mpc8220/dramSetup.c
@@ -32,6 +32,8 @@
#include "i2cCore.h"
#include "dramSetup.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define SPD_SIZE CFG_SDRAM_SPD_SIZE
#define DRAM_SPD (CFG_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
#define TOTAL_BANK CFG_SDRAM_TOTAL_BANKS
@@ -91,8 +93,6 @@
int readSpdData (u8 * spdData)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile i2c8220_t *pi2cReg;
volatile pcfg8220_t *pcfg;
u8 slvAdr = DRAM_SPD;
@@ -403,8 +403,6 @@
u32 dramSetup (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
draminfo_t DramInfo[TOTAL_BANK];
draminfo_t *pDramInfo;
u32 size, temp, cfg_value, mode_value, refresh;
diff --git a/cpu/mpc8220/i2c.c b/cpu/mpc8220/i2c.c
index 62f7c0f..d67936d 100644
--- a/cpu/mpc8220/i2c.c
+++ b/cpu/mpc8220/i2c.c
@@ -23,6 +23,8 @@
#include <common.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_HARD_I2C
#include <mpc8220.h>
@@ -235,7 +237,6 @@
static int mpc_get_fdr (int speed)
{
- DECLARE_GLOBAL_DATA_PTR;
static int fdr = -1;
if (fdr == -1) {
diff --git a/cpu/mpc8220/speed.c b/cpu/mpc8220/speed.c
index 8346efe..200a762 100644
--- a/cpu/mpc8220/speed.c
+++ b/cpu/mpc8220/speed.c
@@ -25,6 +25,8 @@
#include <mpc8220.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
typedef struct pllmultiplier {
u8 hid1;
int multi;
@@ -39,8 +41,6 @@
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
pllcfg_t bus2core[] = {
{0x02, 2, 8}, /* 1 */
{0x01, 2, 4},
@@ -109,8 +109,6 @@
int prt_mpc8220_clks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
printf (" Bus %ld MHz, CPU %ld MHz, PCI %ld MHz, VCO %ld MHz\n",
gd->bus_clk / 1000000, gd->cpu_clk / 1000000,
gd->pci_clk / 1000000, gd->vco_clk / 1000000);
diff --git a/cpu/mpc8220/uart.c b/cpu/mpc8220/uart.c
index 5f54aac..0c4b536 100644
--- a/cpu/mpc8220/uart.c
+++ b/cpu/mpc8220/uart.c
@@ -30,12 +30,13 @@
#include <common.h>
#include <mpc8220.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define PSC_BASE MMAP_PSC1
#if defined(CONFIG_PSC_CONSOLE)
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
u32 counter;
@@ -106,8 +107,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
u32 counter;
diff --git a/cpu/mpc824x/cpu.c b/cpu/mpc824x/cpu.c
index 312dfe2..0a45cc8 100644
--- a/cpu/mpc824x/cpu.c
+++ b/cpu/mpc824x/cpu.c
@@ -26,10 +26,10 @@
#include <common.h>
#include <command.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned int pvr = get_pvr ();
unsigned int version = pvr >> 16;
unsigned char revision;
diff --git a/cpu/mpc824x/speed.c b/cpu/mpc824x/speed.c
index a37a087..fdcb972 100644
--- a/cpu/mpc824x/speed.c
+++ b/cpu/mpc824x/speed.c
@@ -29,6 +29,8 @@
#include <mpc824x.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/* NOTE: This describes the proper use of this file.
*
@@ -107,8 +109,6 @@
/* compute the CPU and memory bus clock frequencies */
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint hid1 = mfspr(HID1);
hid1 = (hid1 >> (32-5)) & 0x1f;
gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5)
diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
index e5c5fcf..8777e77 100644
--- a/cpu/mpc8260/commproc.c
+++ b/cpu/mpc8260/commproc.c
@@ -20,11 +20,11 @@
#include <common.h>
#include <asm/cpm_8260.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void
m8260_cpm_reset(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile ulong count;
@@ -54,8 +54,6 @@
uint
m8260_cpm_dpalloc(uint size, uint align)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
uint retloc;
uint align_mask, off;
@@ -112,8 +110,6 @@
void
m8260_cpm_setbrg(uint brg, uint rate)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile uint *bp;
uint cd = BRG_UART_CLK / rate;
@@ -137,8 +133,6 @@
void
m8260_cpm_fastbrg(uint brg, uint rate, int div16)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile uint *bp;
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
index 5d97933..4f23012 100644
--- a/cpu/mpc8260/cpu.c
+++ b/cpu/mpc8260/cpu.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -47,10 +47,10 @@
#include <asm/processor.h>
#include <asm/cpm_8260.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immap = (immap_t *) CFG_IMMR;
ulong clock = gd->cpu_clk;
uint pvr = get_pvr ();
@@ -264,8 +264,6 @@
*/
unsigned long get_tbclk (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong tbclk;
tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc8260/cpu_init.c b/cpu/mpc8260/cpu_init.c
index babcce4..640026b 100644
--- a/cpu/mpc8260/cpu_init.c
+++ b/cpu/mpc8260/cpu_init.c
@@ -26,6 +26,8 @@
#include <asm/cpm_8260.h>
#include <ioports.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static void config_8260_ioports (volatile immap_t * immr)
{
int portnum;
@@ -97,7 +99,6 @@
*/
void cpu_init_f (volatile immap_t * immr)
{
- DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
uint sccr;
#endif
@@ -222,8 +223,6 @@
*/
int cpu_init_r (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
immr->im_cpm.cp_rccr = CFG_RCCR;
@@ -236,8 +235,6 @@
*/
int prt_8260_rsr (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
static struct {
ulong mask;
char *desc;
diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c
index ed3515f..584c40f 100644
--- a/cpu/mpc8260/ether_fcc.c
+++ b/cpu/mpc8260/ether_fcc.c
@@ -51,6 +51,8 @@
#include <miiphy.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \
defined(CONFIG_NET_MULTI)
@@ -644,8 +646,6 @@
void
eth_loopback_test (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile cpm8260_t *cp = &(immr->im_cpm);
int c, nclosed;
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
index ea97ab8..34bd389 100644
--- a/cpu/mpc8260/i2c.c
+++ b/cpu/mpc8260/i2c.c
@@ -34,6 +34,8 @@
/* define to enable debug messages */
#undef DEBUG_I2C
+DECLARE_GLOBAL_DATA_PTR;
+
/* uSec to wait between polls of the i2c */
#define DELAY_US 100
/* uSec to wait for the CPM to start processing the buffer */
@@ -213,8 +215,6 @@
void i2c_init(int speed, int slaveadd)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immap = (immap_t *)CFG_IMMR ;
volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm;
volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
diff --git a/cpu/mpc8260/interrupts.c b/cpu/mpc8260/interrupts.c
index b2e4d83..56e9a72 100644
--- a/cpu/mpc8260/interrupts.c
+++ b/cpu/mpc8260/interrupts.c
@@ -29,6 +29,8 @@
#include <mpc8260_irq.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/****************************************************************************/
struct irq_action {
@@ -140,8 +142,6 @@
int interrupt_init_cpu (unsigned *decrementer_count)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) CFG_IMMR;
*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index 44576de..ea5514f 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -33,6 +33,11 @@
#include <mpc8260.h>
#include <asm/m8260_pci.h>
#include <asm/io.h>
+
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
/*
* Local->PCI map (from CPU) controlled by
* MPC826x master window
@@ -234,9 +239,6 @@
void pci_mpc8250_init (struct pci_controller *hose)
{
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
- DECLARE_GLOBAL_DATA_PTR;
-#endif
u16 tempShort;
volatile immap_t *immap = (immap_t *) CFG_IMMR;
diff --git a/cpu/mpc8260/serial_scc.c b/cpu/mpc8260/serial_scc.c
index 32016f2..3a6eaf0 100644
--- a/cpu/mpc8260/serial_scc.c
+++ b/cpu/mpc8260/serial_scc.c
@@ -32,6 +32,8 @@
#include <mpc8260.h>
#include <asm/cpm_8260.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_CONS_ON_SCC)
#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
@@ -181,8 +183,6 @@
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#if defined(CONFIG_CONS_USE_EXTC)
m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate,
CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
diff --git a/cpu/mpc8260/serial_smc.c b/cpu/mpc8260/serial_smc.c
index b486f83..f3dffeb 100644
--- a/cpu/mpc8260/serial_smc.c
+++ b/cpu/mpc8260/serial_smc.c
@@ -34,6 +34,8 @@
#include <mpc8260.h>
#include <asm/cpm_8260.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_CONS_ON_SMC)
#if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */
@@ -170,8 +172,6 @@
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#if defined(CONFIG_CONS_USE_EXTC)
m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate,
CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
index 99afe76..360404f 100644
--- a/cpu/mpc8260/speed.c
+++ b/cpu/mpc8260/speed.c
@@ -25,6 +25,8 @@
#include <mpc8260.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ------------------------------------------------------------------------- */
/* Bus-to-Core Multiplier */
@@ -101,8 +103,6 @@
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immap = (immap_t *) CFG_IMMR;
ulong clkin;
ulong sccr, dfbrg;
@@ -159,8 +159,6 @@
int prt_8260_clks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immap = (immap_t *) CFG_IMMR;
ulong sccr, dfbrg;
ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf;
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index f24d3a4..7ca1ceb 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -38,10 +38,11 @@
#include <ft_build.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int checkcpu(void)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong clock = gd->cpu_clk;
u32 pvr = get_pvr();
char buf[32];
@@ -138,8 +139,6 @@
unsigned long get_tbclk(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong tbclk;
tbclk = (gd->bus_clk + 3L) / 4L;
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index acf6862..6ed0992 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -29,6 +29,8 @@
#include <mpc83xx.h>
#include <ioports.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Breathe some life into the CPU...
*
@@ -38,8 +40,6 @@
*/
void cpu_init_f (volatile immap_t * im)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
index dfd51c1..5a0babf 100644
--- a/cpu/mpc83xx/interrupts.c
+++ b/cpu/mpc83xx/interrupts.c
@@ -35,6 +35,8 @@
#include <mpc83xx.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
struct irq_action {
interrupt_handler_t *handler;
void *arg;
@@ -43,8 +45,6 @@
int interrupt_init_cpu (unsigned *decrementer_count)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
*decrementer_count = (gd->bus_clk / 4) / CFG_HZ;
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 1368fc3..ad6b3f6 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -32,6 +32,8 @@
#include <mpc83xx.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* ----------------------------------------------------------------- */
typedef enum {
@@ -92,7 +94,6 @@
*/
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
u32 pci_sync_in;
u8 spmf;
@@ -342,14 +343,11 @@
*********************************************/
ulong get_bus_freq (ulong dummy)
{
- DECLARE_GLOBAL_DATA_PTR;
return gd->csb_clk;
}
int print_clock_conf (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
printf("Clock configuration:\n");
printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000);
printf(" Core: %4d MHz\n",gd->core_clk/1000000);
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
index c7a5638..44345af 100644
--- a/cpu/mpc83xx/traps.c
+++ b/cpu/mpc83xx/traps.c
@@ -40,6 +40,8 @@
#include <asm/processor.h>
#include <asm/mpc8349_pci.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
@@ -52,7 +54,6 @@
void
print_backtrace(unsigned long *sp)
{
- DECLARE_GLOBAL_DATA_PTR;
int cnt = 0;
unsigned long i;
diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c
index aa8a5a5..3504d50 100644
--- a/cpu/mpc85xx/commproc.c
+++ b/cpu/mpc85xx/commproc.c
@@ -24,6 +24,8 @@
#include <common.h>
#include <asm/cpm_85xx.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_CPM2)
/*
* because we have stack and init data in dual port ram
@@ -35,8 +37,6 @@
void
m8560_cpm_reset(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile ulong count;
@@ -64,8 +64,6 @@
uint
m8560_cpm_dpalloc(uint size, uint align)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
uint retloc;
uint align_mask, off;
@@ -122,8 +120,6 @@
void
m8560_cpm_setbrg(uint brg, uint rate)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile uint *bp;
@@ -146,8 +142,6 @@
void
m8560_cpm_fastbrg(uint brg, uint rate, int div16)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile uint *bp;
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index efde9cc..c12b47b 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -30,6 +30,8 @@
#include <ioports.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_CPM2
static void config_8560_ioports (volatile immap_t * immr)
{
@@ -103,7 +105,6 @@
void cpu_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile ccsr_lbc_t *memctl = &immap->im_lbc;
extern void m8560_cpm_reset (void);
diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c
index cf060d6..4e925f8 100644
--- a/cpu/mpc85xx/serial_scc.c
+++ b/cpu/mpc85xx/serial_scc.c
@@ -35,6 +35,8 @@
#include <common.h>
#include <asm/cpm_85xx.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_CPM2)
#if defined(CONFIG_CONS_ON_SCC)
@@ -186,8 +188,6 @@
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
#if defined(CONFIG_CONS_USE_EXTC)
m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index d736742..ca81ee7 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -29,6 +29,8 @@
#include <ppc_asm.tmpl>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* --------------------------------------------------------------- */
void get_sys_info (sys_info_t * sysInfo)
@@ -80,7 +82,6 @@
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
sys_info_t sys_info;
#if defined(CONFIG_CPM2)
volatile immap_t *immap = (immap_t *) CFG_IMMR;
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index a87eed2..904f052 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -39,6 +39,8 @@
#include <command.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
int (*debugger_exception_handler)(struct pt_regs *) = 0;
#endif
@@ -83,7 +85,6 @@
void
print_backtrace(unsigned long *sp)
{
- DECLARE_GLOBAL_DATA_PTR;
int cnt = 0;
unsigned long i;
diff --git a/cpu/mpc8xx/commproc.c b/cpu/mpc8xx/commproc.c
index 75740e0..07c763c 100644
--- a/cpu/mpc8xx/commproc.c
+++ b/cpu/mpc8xx/commproc.c
@@ -24,12 +24,12 @@
#include <common.h>
#include <commproc.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CFG_ALLOC_DPRAM
int dpram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* Reclaim the DP memory for our use. */
gd->dp_alloc_base = CPM_DATAONLY_BASE;
gd->dp_alloc_top = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
@@ -43,7 +43,6 @@
*/
uint dpram_alloc (uint size)
{
- DECLARE_GLOBAL_DATA_PTR;
uint addr = gd->dp_alloc_base;
if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
@@ -56,8 +55,6 @@
uint dpram_base (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
return gd->dp_alloc_base;
}
@@ -67,8 +64,6 @@
*/
uint dpram_alloc_align (uint size, uint align)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint addr, mask = align - 1;
addr = (gd->dp_alloc_base + mask) & ~mask;
@@ -83,8 +78,6 @@
uint dpram_base_align (uint align)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint mask = align - 1;
return (gd->dp_alloc_base + mask) & ~mask;
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index c4a0cba..97112f0 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -39,6 +39,8 @@
#include <mpc8xx.h>
#include <asm/cache.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static char *cpu_warning = "\n " \
"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
@@ -349,8 +351,6 @@
int checkcpu (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong clock = gd->cpu_clk;
uint immr = get_immr (0); /* Return full IMMR contents */
uint pvr = get_pvr ();
@@ -539,8 +539,6 @@
*/
unsigned long get_tbclk (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint immr = get_immr (0); /* Return full IMMR contents */
volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
ulong oscclk, factor, pll;
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index b2c59c6..1a7111f 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -27,6 +27,10 @@
#include <mpc8xx.h>
#include <commproc.h>
+#if defined(CFG_RTCSC) || defined(CFG_RMDS)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
#if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH)
void cpm_load_patch (volatile immap_t * immr);
#endif
@@ -259,8 +263,6 @@
int cpu_init_r (void)
{
#if defined(CFG_RTCSC) || defined(CFG_RMDS)
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd = gd->bd;
volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
#endif
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index d2f5d88..6006478 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -27,6 +27,8 @@
#include <net.h>
#include <command.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#undef ET_DEBUG
#if (CONFIG_COMMANDS & CFG_CMD_NET) && \
@@ -371,7 +373,6 @@
static void fec_pin_init(int fecidx)
{
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile fec_t *fecp;
diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
index 682db53..6c59374 100644
--- a/cpu/mpc8xx/i2c.c
+++ b/cpu/mpc8xx/i2c.c
@@ -37,6 +37,8 @@
#include <watchdog.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
/* define to enable debug messages */
#undef DEBUG_I2C
@@ -205,8 +207,6 @@
void
i2c_init(int speed, int slaveaddr)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immap = (immap_t *)CFG_IMMR ;
volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c;
@@ -615,8 +615,6 @@
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- DECLARE_GLOBAL_DATA_PTR;
-
i2c_state_t state;
uchar xaddr[4];
int rc;
@@ -671,8 +669,6 @@
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- DECLARE_GLOBAL_DATA_PTR;
-
i2c_state_t state;
uchar xaddr[4];
int rc;
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index fa0405f1..26a82cc 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -27,6 +27,8 @@
#include <serial.h>
#include <watchdog.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
@@ -65,7 +67,6 @@
static void serial_setdivisor(volatile cpm8xx_t *cp)
{
- DECLARE_GLOBAL_DATA_PTR;
int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
if(divisor/16>0x1000) {
@@ -268,8 +269,6 @@
volatile cpm8xx_t *cpmp = &(im->im_cpm);
#ifdef CONFIG_MODEM_SUPPORT
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->be_quiet)
return;
#endif
@@ -553,8 +552,6 @@
volatile cpm8xx_t *cpmp = &(im->im_cpm);
#ifdef CONFIG_MODEM_SUPPORT
- DECLARE_GLOBAL_DATA_PTR;
-
if (gd->be_quiet)
return;
#endif
@@ -649,13 +646,11 @@
#ifdef CONFIG_MODEM_SUPPORT
void disable_putc(void)
{
- DECLARE_GLOBAL_DATA_PTR;
gd->be_quiet = 1;
}
void enable_putc(void)
{
- DECLARE_GLOBAL_DATA_PTR;
gd->be_quiet = 0;
}
#endif
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index f038316..57f91c0 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -25,6 +25,8 @@
#include <mpc8xx.h>
#include <asm/processor.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK) || defined(DEBUG)
#define PITC_SHIFT 16
@@ -181,8 +183,6 @@
*/
int get_clocks (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uint immr = get_immr (0); /* Return full IMMR contents */
volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
uint sccr = immap->im_clkrst.car_sccr;
@@ -238,8 +238,6 @@
*/
int get_clocks_866 (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) CFG_IMMR;
char tmp[64];
long cpuclk = 0;
@@ -277,8 +275,6 @@
*/
int sdram_adjust_866 (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) CFG_IMMR;
long mamr;
@@ -371,8 +367,6 @@
*/
int adjust_sdram_tbs_8xx (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) CFG_IMMR;
long mamr;
long sccr;
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
index ee60477..918de67 100644
--- a/cpu/mpc8xx/video.c
+++ b/cpu/mpc8xx/video.c
@@ -39,6 +39,8 @@
#ifdef CONFIG_VIDEO
+DECLARE_GLOBAL_DATA_PTR;
+
/************************************************************************/
/* ** DEBUG SETTINGS */
/************************************************************************/
@@ -1164,7 +1166,6 @@
u16 *screen = video_fb_address, width = VIDEO_COLS;
#ifdef VIDEO_INFO
# ifndef CONFIG_FADS
- DECLARE_GLOBAL_DATA_PTR;
char temp[32];
# endif
char info[80];
@@ -1282,8 +1283,6 @@
int drv_video_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int error, devices = 1;
device_t videodev;
diff --git a/cpu/nios/serial.c b/cpu/nios/serial.c
index 4bdda25..5ecdc6d 100644
--- a/cpu/nios/serial.c
+++ b/cpu/nios/serial.c
@@ -26,6 +26,8 @@
#include <watchdog.h>
#include <nios-io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*------------------------------------------------------------------
* JTAG acts as the serial port
*-----------------------------------------------------------------*/
@@ -83,7 +85,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned div;
div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
diff --git a/cpu/nios2/serial.c b/cpu/nios2/serial.c
index 2d08c93..3d76603 100644
--- a/cpu/nios2/serial.c
+++ b/cpu/nios2/serial.c
@@ -27,6 +27,8 @@
#include <nios2.h>
#include <nios2-io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*------------------------------------------------------------------
* JTAG acts as the serial port
*-----------------------------------------------------------------*/
@@ -93,7 +95,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
unsigned div;
div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 947b85e..fad895b 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -77,6 +77,8 @@
#include <asm/processor.h>
#include <pci.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
#ifdef CONFIG_PCI
@@ -92,8 +94,6 @@
*-----------------------------------------------------------------------------*/
void pci_405gp_init(struct pci_controller *hose)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int i, reg_num = 0;
bd_t *bd = gd->bd;
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index a26533c..0cd72b0 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -37,6 +37,10 @@
#include <asm/cache.h>
#include <ppc4xx.h>
+#if !defined(CONFIG_405)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
#if defined(CONFIG_440)
#define FREQ_EBC (sys_info.freqEPB)
@@ -116,7 +120,6 @@
int checkcpu (void)
{
#if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */
- DECLARE_GLOBAL_DATA_PTR;
uint pvr = get_pvr();
ulong clock = gd->cpu_clk;
char buf[32];
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 79cfba3..1a139d7 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -27,6 +27,10 @@
#include <asm/processor.h>
#include <ppc4xx.h>
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
@@ -209,8 +213,6 @@
int cpu_init_r (void)
{
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd = gd->bd;
unsigned long reg;
#if defined(CONFIG_405GP)
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index be94b57..7db1cd8 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -16,6 +16,8 @@
#ifdef CONFIG_HARD_I2C
+DECLARE_GLOBAL_DATA_PTR;
+
#define IIC_OK 0
#define IIC_NOK 1
#define IIC_NOK_LA 2 /* Lost arbitration */
@@ -350,7 +352,6 @@
{
uchar xaddr[4];
int ret;
- DECLARE_GLOBAL_DATA_PTR;
if ( alen > 4 ) {
printf ("I2C read: addr len %d not supported\n", alen);
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 1d8dc7c..3aae4ce 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -36,6 +36,8 @@
#include <commproc.h>
#include "vecnum.h"
+DECLARE_GLOBAL_DATA_PTR;
+
/****************************************************************************/
/*
@@ -96,8 +98,6 @@
int interrupt_init_cpu (unsigned *decrementer_count)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int vec;
unsigned long val;
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index e9548cd..c5ab017 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -1,7 +1,10 @@
/*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
+ * (C) Copyright 2006
+ * DAVE Srl <www.dave-tech.it>
+ *
* (C) Copyright 2002-2004
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
@@ -27,28 +30,19 @@
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
+#include "sdram.h"
#ifdef CONFIG_SDRAM_BANK0
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-
-
-struct sdram_conf_s {
- unsigned long size;
- unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
#ifndef CFG_SDRAM_TABLE
sdram_conf_t mb0cf[] = {
- {(128 << 20), 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
- {(64 << 20), 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
- {(32 << 20), 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
- {(16 << 20), 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
- {(4 << 20), 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
+ {(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
+ {(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
+ {(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
+ {(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
+ {(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
};
#else
sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
@@ -59,31 +53,138 @@
#ifndef CONFIG_440
+#ifdef CFG_SDRAM_CASL
+static ulong ns2clks(ulong ns)
+{
+ ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
+
+ return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
+}
+#endif /* CFG_SDRAM_CASL */
+
+static ulong compute_sdtr1(ulong speed)
+{
+#ifdef CFG_SDRAM_CASL
+ ulong tmp;
+ ulong sdtr1 = 0;
+
+ /* CASL */
+ if (CFG_SDRAM_CASL < 2)
+ sdtr1 |= (1 << SDRAM0_TR_CASL);
+ else
+ if (CFG_SDRAM_CASL > 4)
+ sdtr1 |= (3 << SDRAM0_TR_CASL);
+ else
+ sdtr1 |= ((CFG_SDRAM_CASL-1) << SDRAM0_TR_CASL);
+
+ /* PTA */
+ tmp = ns2clks(CFG_SDRAM_PTA);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
+
+ /* CTP */
+ tmp = ns2clks(CFG_SDRAM_CTP);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
+
+ /* LDF */
+ tmp = ns2clks(CFG_SDRAM_LDF);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
+ else
+ sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
+
+ /* RFTA */
+ tmp = ns2clks(CFG_SDRAM_RFTA);
+ if ((tmp >= 4) && (tmp <= 10))
+ sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
+ else
+ sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
+
+ /* RCD */
+ tmp = ns2clks(CFG_SDRAM_RCD);
+ if ((tmp >= 2) && (tmp <= 4))
+ sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
+ else
+ sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
+
+ return sdtr1;
+#else /* CFG_SDRAM_CASL */
+ /*
+ * If no values are configured in the board config file
+ * use the default values, which seem to be ok for most
+ * boards.
+ *
+ * REMARK:
+ * For new board ports we strongly recommend to define the
+ * correct values for the used SDRAM chips in your board
+ * config file (see PPChameleonEVB.h)
+ */
+ if (speed > 100000000) {
+ /*
+ * 133 MHz SDRAM
+ */
+ return 0x01074015;
+ } else {
+ /*
+ * default: 100 MHz SDRAM
+ */
+ return 0x0086400d;
+ }
+#endif /* CFG_SDRAM_CASL */
+}
+
+/* refresh is expressed in ms */
+static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
+{
+#ifdef CFG_SDRAM_CASL
+ ulong tmp;
+
+ tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
+ tmp /= 1000000;
+
+ return ((tmp & 0x00003FF8) << 16);
+#else /* CFG_SDRAM_CASL */
+ if (speed > 100000000) {
+ /*
+ * 133 MHz SDRAM
+ */
+ return 0x07f00000;
+ } else {
+ /*
+ * default: 100 MHz SDRAM
+ */
+ return 0x05f00000;
+ }
+#endif /* CFG_SDRAM_CASL */
+}
+
/*
* Autodetect onboard SDRAM on 405 platforms
*/
void sdram_init(void)
{
+ ulong speed;
ulong sdtr1;
- ulong rtr;
int i;
- /*
- * Support for 100MHz and 133MHz SDRAM
- */
- if (get_bus_freq(0) > 100000000) {
- /*
- * 133 MHz SDRAM
- */
- sdtr1 = 0x01074015;
- rtr = 0x07f00000;
- } else {
- /*
- * default: 100 MHz SDRAM
- */
- sdtr1 = 0x0086400d;
- rtr = 0x05f00000;
- }
+ /*
+ * Determine SDRAM speed
+ */
+ speed = get_bus_freq(0); /* parameter not used on ppc4xx */
+
+ /*
+ * sdtr1 (register SDRAM0_TR) must take into account timings listed
+ * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
+ * account actual SDRAM size. So we can set up sdtr1 according to what
+ * is specified in board configuration file while rtr dependds on SDRAM
+ * size we are assuming before detection.
+ */
+ sdtr1 = compute_sdtr1(speed);
for (i=0; i<N_MB0CF; i++) {
/*
@@ -96,7 +197,7 @@
*/
mtsdram0(mem_mb0cf, mb0cf[i].reg);
mtsdram0(mem_sdtr1, sdtr1);
- mtsdram0(mem_rtr, rtr);
+ mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
udelay(200);
@@ -120,6 +221,124 @@
#else /* CONFIG_440 */
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+static void sdram_tr1_set(int ram_address, int* tr1_value)
+{
+ int i;
+ int j, k;
+ volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
+ int first_good = -1, last_bad = 0x1ff;
+
+ unsigned long test[NUM_TRIES] = {
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+ /* go through all possible SDRAM0_TR1[RDCT] values */
+ for (i=0; i<=0x1ff; i++) {
+ /* set the current value for TR1 */
+ mtsdram(mem_tr1, (0x80800800 | i));
+
+ /* write values */
+ for (j=0; j<NUM_TRIES; j++) {
+ ram_pointer[j] = test[j];
+
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+ }
+
+ /* read values back */
+ for (j=0; j<NUM_TRIES; j++) {
+ for (k=0; k<NUM_READS; k++) {
+ /* clear any cache at ram location */
+ __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+ if (ram_pointer[j] != test[j])
+ break;
+ }
+
+ /* read error */
+ if (k != NUM_READS)
+ break;
+ }
+
+ /* we have a SDRAM0_TR1[RDCT] that is part of the window */
+ if (j == NUM_TRIES) {
+ if (first_good == -1)
+ first_good = i; /* found beginning of window */
+ } else { /* bad read */
+ /* if we have not had a good read then don't care */
+ if (first_good != -1) {
+ /* first failure after a good read */
+ last_bad = i-1;
+ break;
+ }
+ }
+ }
+
+ /* return the current value for TR1 */
+ *tr1_value = (first_good + last_bad) / 2;
+}
+
+
+#ifdef CONFIG_SDRAM_ECC
+static void ecc_init(ulong start, ulong size)
+{
+ ulong current_addr; /* current byte address */
+ ulong end_addr; /* end of memory region */
+ ulong addr_inc; /* address skip between writes */
+ ulong cfg0_reg; /* for restoring ECC state */
+
+ /*
+ * TODO: Enable dcache before running this test (speedup)
+ */
+
+ mfsdram(mem_cfg0, cfg0_reg);
+ mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_GEN);
+
+ /*
+ * look at geometry of SDRAM (data width) to determine whether we
+ * can skip words when writing
+ */
+ if ((cfg0_reg & SDRAM_CFG0_DRAMWDTH) == SDRAM_CFG0_DRAMWDTH_32)
+ addr_inc = 4;
+ else
+ addr_inc = 8;
+
+ current_addr = start;
+ end_addr = start + size;
+
+ while (current_addr < end_addr) {
+ *((ulong *)current_addr) = 0x00000000;
+ current_addr += addr_inc;
+ }
+
+ /*
+ * TODO: Flush dcache and disable it again
+ */
+
+ /*
+ * Enable ecc checking and parity errors
+ */
+ mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_CHK);
+}
+#endif
+
/*
* Autodetect onboard DDR SDRAM on 440 platforms
*
@@ -130,6 +349,7 @@
long int initdram(int board_type)
{
int i;
+ int tr1_bank1;
for (i=0; i<N_MB0CF; i++) {
/*
@@ -164,6 +384,16 @@
if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
/*
+ * Optimize TR1 to current hardware environment
+ */
+ sdram_tr1_set(0x00000000, &tr1_bank1);
+ mtsdram(mem_tr1, (tr1_bank1 | 0x80800800));
+
+#ifdef CONFIG_SDRAM_ECC
+ ecc_init(0, mb0cf[i].size);
+#endif
+
+ /*
* OK, size detected -> all done
*/
return mb0cf[i].size;
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
new file mode 100644
index 0000000..62b5442
--- /dev/null
+++ b/cpu/ppc4xx/sdram.h
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * DAVE Srl <www.dave-tech.it>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SDRAM_H_
+#define _SDRAM_H_
+
+#include <config.h>
+
+#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
+
+#define ONE_BILLION 1000000000
+
+struct sdram_conf_s {
+ unsigned long size;
+ int rows;
+ unsigned long reg;
+};
+
+typedef struct sdram_conf_s sdram_conf_t;
+
+/* Bitfields offsets */
+#define SDRAM0_TR_CASL (31 - 8)
+#define SDRAM0_TR_PTA (31 - 13)
+#define SDRAM0_TR_CTP (31 - 15)
+#define SDRAM0_TR_LDF (31 - 17)
+#define SDRAM0_TR_RFTA (31 - 29)
+#define SDRAM0_TR_RCD (31 - 31)
+
+#ifdef CFG_SDRAM_CL
+/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
+#define CFG_SDRAM_CASL CFG_SDRAM_CL
+#define CFG_SDRAM_PTA CFG_SDRAM_tRP
+#define CFG_SDRAM_CTP (CFG_SDRAM_tRC - CFG_SDRAM_tRCD - CFG_SDRAM_tRP)
+#define CFG_SDRAM_LDF 0
+#ifdef CFG_SDRAM_tRFC
+#define CFG_SDRAM_RFTA CFG_SDRAM_tRFC
+#else
+#define CFG_SDRAM_RFTA CFG_SDRAM_tRC
+#endif
+#define CFG_SDRAM_RCD CFG_SDRAM_tRCD
+#endif /* #ifdef CFG_SDRAM_CL */
+
+/*
+ * Some defines for the 440 DDR controller
+ */
+#define SDRAM_CFG0_DC_EN 0x80000000 /* SDRAM Controller Enable */
+#define SDRAM_CFG0_MEMCHK 0x30000000 /* Memory data error checking mask*/
+#define SDRAM_CFG0_MEMCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_CFG0_MEMCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_CFG0_MEMCHK_CHK 0x30000000 /* ECC generation and checking */
+#define SDRAM_CFG0_DRAMWDTH 0x02000000 /* DRAM width mask */
+#define SDRAM_CFG0_DRAMWDTH_32 0x00000000 /* 32 bits */
+#define SDRAM_CFG0_DRAMWDTH_64 0x02000000 /* 64 bits */
+
+#endif
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index e7f6bcb..83c9479 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -59,6 +59,8 @@
#include <malloc.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
/*****************************************************************************/
#ifdef CONFIG_IOP480
@@ -161,8 +163,6 @@
int serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile char val;
unsigned short br_reg;
@@ -185,8 +185,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned short br_reg;
br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
@@ -431,8 +429,6 @@
int serial_init(void)
#endif
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long reg;
unsigned long udiv;
unsigned short bdiv;
@@ -520,8 +516,6 @@
int serial_init (void)
#endif
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long reg;
unsigned long tmp;
unsigned long clk;
@@ -597,8 +591,6 @@
void serial_setbrg (void)
#endif
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned long tmp;
unsigned long clk;
unsigned long udiv;
@@ -880,8 +872,6 @@
#if (CONFIG_KGDB_SER_INDEX & 2)
void kgdb_serial_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile char val;
unsigned short br_reg;
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 553c491..02b4383 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -26,7 +26,7 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-/* ------------------------------------------------------------------------- */
+DECLARE_GLOBAL_DATA_PTR;
#define ONE_BILLION 1000000000
@@ -522,8 +522,6 @@
int get_clocks (void)
{
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
- DECLARE_GLOBAL_DATA_PTR;
-
sys_info_t sys_info;
get_sys_info (&sys_info);
@@ -533,8 +531,6 @@
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
#ifdef CONFIG_IOP480
- DECLARE_GLOBAL_DATA_PTR;
-
gd->cpu_clk = 66000000;
gd->bus_clk = 66000000;
#endif
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
index b33d674..0ee8180 100644
--- a/cpu/pxa/cpu.c
+++ b/cpu/pxa/cpu.c
@@ -34,14 +34,16 @@
#include <command.h>
#include <asm/arch/pxa-regs.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
int cpu_init (void)
{
/*
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
index b6155b1..722d949 100644
--- a/cpu/pxa/i2c.c
+++ b/cpu/pxa/i2c.c
@@ -47,7 +47,13 @@
/*#define DEBUG_I2C 1 /###* activate local debugging output */
#define I2C_PXA_SLAVE_ADDR 0x1 /* slave pxa unit address */
-#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+#if (CFG_I2C_SPEED == 400000)
+#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+#else
+#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+#endif
+
#define I2C_ISR_INIT 0x7FF
#ifdef DEBUG_I2C
@@ -91,7 +97,11 @@
ICR |= ICR_UR; /* reset the unit */
udelay(100);
ICR &= ~ICR_IUE; /* disable unit */
+#ifdef CONFIG_CPU_MONAHANS
+ CKENB |= (CKENB_4_I2C); /* | CKENB_1_PWM1 | CKENB_0_PWM0); */
+#else /* CONFIG_CPU_MONAHANS */
CKEN |= CKEN14_I2C; /* set the global I2C clock on */
+#endif
ISAR = I2C_PXA_SLAVE_ADDR; /* set our slave address */
ICR = I2C_ICR_INIT; /* set control register values */
ISR = I2C_ISR_INIT; /* set clear interrupt bits */
@@ -104,9 +114,8 @@
* i2c_isr_set_cleared: - wait until certain bits of the I2C status register
* are set and cleared
*
- * @return: 0 in case of success, 1 means timeout (no match within 10 ms).
+ * @return: 1 in case of success, 0 means timeout (no match within 10 ms).
*/
-
static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask )
{
int timeout = 10000;
@@ -360,9 +369,9 @@
msg.data = 0x00;
if ((ret=i2c_transfer(&msg))) return -1;
- *(buffer++) = msg.data;
-
+ *buffer = msg.data;
PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer));
+ buffer++;
}
diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c
index 9bf2a7c..cb3a478 100644
--- a/cpu/pxa/serial.c
+++ b/cpu/pxa/serial.c
@@ -32,10 +32,10 @@
#include <watchdog.h>
#include <asm/arch/pxa-regs.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned int quot = 0;
if (gd->baudrate == 1200)
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index 9541c9b..ffaa30f 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -190,6 +190,14 @@
#define OIER 0x1C
/* Clock Manager Registers */
+#ifdef CONFIG_CPU_MONAHANS
+# ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
+# error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
+# endif
+# ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
+# define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
+# endif
+#else /* ! CONFIG_CPU_MONAHANS */
#ifdef CFG_CPUSPEED
CC_BASE: .word 0x41300000
#define CCCR 0x00
@@ -197,6 +205,7 @@
#else
#error "You have to define CFG_CPUSPEED!!"
#endif
+#endif /* CONFIG_CPU_MONAHANS */
/* takes care the CP15 update has taken place */
.macro CPWAIT reg
@@ -233,9 +242,13 @@
str r2, [r1]
#endif
-#ifndef CONFIG_CPU_MONAHANS
+ /* set clock speed */
+#ifdef CONFIG_CPU_MONAHANS
+ ldr r0, =ACCR
+ ldr r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
+ str r1, [r0]
+#else /* ! CONFIG_CPU_MONAHANS */
#ifdef CFG_CPUSPEED
- /* set clock speed tbd@mk: required for monahans? */
ldr r0, CC_BASE
ldr r1, cpuspeed
str r1, [r0, #CCCR]
diff --git a/cpu/s3c44b0/serial.c b/cpu/s3c44b0/serial.c
index 70b4ee8..95d0266 100644
--- a/cpu/s3c44b0/serial.c
+++ b/cpu/s3c44b0/serial.c
@@ -37,6 +37,8 @@
#include <common.h>
#include <asm/hardware.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* flush serial input queue. returns 0 on success or negative error
* number otherwise
*/
@@ -68,8 +70,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
u32 divisor = 0;
/* get correct divisor */
diff --git a/cpu/sa1100/cpu.c b/cpu/sa1100/cpu.c
index 17e5b0d..f1bd644 100644
--- a/cpu/sa1100/cpu.c
+++ b/cpu/sa1100/cpu.c
@@ -33,14 +33,16 @@
#include <common.h>
#include <command.h>
+#ifdef CONFIG_USE_IRQ
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
int cpu_init (void)
{
/*
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
- DECLARE_GLOBAL_DATA_PTR;
-
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
diff --git a/cpu/sa1100/serial.c b/cpu/sa1100/serial.c
index a598489..5d18875 100644
--- a/cpu/sa1100/serial.c
+++ b/cpu/sa1100/serial.c
@@ -31,10 +31,10 @@
#include <common.h>
#include <SA-1100.h>
+DECLARE_GLOBAL_DATA_PTR;
+
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned int reg = 0;
if (gd->baudrate == 1200)
diff --git a/drivers/netconsole.c b/drivers/netconsole.c
index 9a0a24f..69089f9 100644
--- a/drivers/netconsole.c
+++ b/drivers/netconsole.c
@@ -29,6 +29,8 @@
#include <devices.h>
#include <net.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static char input_buffer[512];
static int input_size = 0; /* char count in input buffer */
static int input_offset = 0; /* offset to valid chars in input buffer */
@@ -105,8 +107,6 @@
static void nc_send_packet (const char *buf, int len)
{
- DECLARE_GLOBAL_DATA_PTR;
-
struct eth_device *eth;
int inited = 0;
uchar *pkt;
diff --git a/drivers/ns9750_serial.c b/drivers/ns9750_serial.c
index aced3da..8dff367 100644
--- a/drivers/ns9750_serial.c
+++ b/drivers/ns9750_serial.c
@@ -33,6 +33,8 @@
#include "ns9750_bbus.h" /* for GPIOs */
#include "ns9750_ser.h" /* for serial configuration */
+DECLARE_GLOBAL_DATA_PTR;
+
#define CONSOLE CONFIG_CONS_INDEX
static unsigned int calcBitrateRegister( void );
@@ -183,8 +185,6 @@
static unsigned int calcBitrateRegister( void )
{
- DECLARE_GLOBAL_DATA_PTR;
-
return ( NS9750_SER_BITRATE_EBIT |
NS9750_SER_BITRATE_CLKMUX_BCLK |
NS9750_SER_BITRATE_TMODE |
@@ -204,8 +204,6 @@
static unsigned int calcRxCharGapRegister( void )
{
- DECLARE_GLOBAL_DATA_PTR;
-
return NS9750_SER_RX_CHAR_TIMER_TRUN;
}
diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c
index e2a38dc..724fa40 100644
--- a/drivers/ps2ser.c
+++ b/drivers/ps2ser.c
@@ -21,6 +21,8 @@
#include <asm/atomic.h>
#include <ps2mult.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* #define DEBUG */
#define PS2SER_BAUD 57600
@@ -61,8 +63,6 @@
#ifdef CONFIG_MPC5xxx
int ps2ser_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
unsigned long baseclk;
int div;
diff --git a/drivers/s3c4510b_uart.c b/drivers/s3c4510b_uart.c
index 44b96a9..ddcd591 100644
--- a/drivers/s3c4510b_uart.c
+++ b/drivers/s3c4510b_uart.c
@@ -50,6 +50,8 @@
#include <asm/hardware.h>
#include "s3c4510b_uart.h"
+DECLARE_GLOBAL_DATA_PTR;
+
static UART *uart;
/* flush serial input queue. returns 0 on success or negative error
@@ -82,8 +84,6 @@
void serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
UART_LINE_CTRL ulctrl;
UART_CTRL uctrl;
UART_BAUD_DIV ubd;
diff --git a/drivers/serial.c b/drivers/serial.c
index 057a1ab..228781b 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -30,6 +30,8 @@
#include <ns87308.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
#if !defined(CONFIG_CONS_INDEX)
#error "No console index specified."
#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
@@ -77,7 +79,6 @@
static int calc_divisor (NS16550_t port)
{
- DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_OMAP1510
/* If can't cleanly clock 115200 set div to 1 */
if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
diff --git a/drivers/serial_max3100.c b/drivers/serial_max3100.c
index bbe212b..35c5596 100644
--- a/drivers/serial_max3100.c
+++ b/drivers/serial_max3100.c
@@ -28,6 +28,8 @@
#ifdef CONFIG_MAX3100_SERIAL
+DECLARE_GLOBAL_DATA_PTR;
+
/**************************************************************/
/* convienient macros */
@@ -217,7 +219,6 @@
{
unsigned int wconf, rconf;
int i;
- DECLARE_GLOBAL_DATA_PTR;
wconf = 0;
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 4c5e1b5..7ec565c 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -23,6 +23,8 @@
#include "tsec.h"
#include "miiphy.h"
+DECLARE_GLOBAL_DATA_PTR;
+
#define TX_BUF_CNT 2
static uint rxIdx; /* index of the current RX buffer */
@@ -1082,7 +1084,6 @@
struct phy_cmd **cmdlistptr;
struct phy_cmd *cmd;
int i,j,k;
- DECLARE_GLOBAL_DATA_PTR;
for(i=0; phy_info[i]; i++) {
/* First thing's first: relocate the pointers to the
diff --git a/examples/mem_to_mem_idma2intr.c b/examples/mem_to_mem_idma2intr.c
index 3a269c9..3ff2804 100644
--- a/examples/mem_to_mem_idma2intr.c
+++ b/examples/mem_to_mem_idma2intr.c
@@ -30,6 +30,8 @@
#include <common.h>
#include <exports.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define STANDALONE
#ifndef STANDALONE /* Linked into/Part of PPCBoot */
@@ -346,8 +348,6 @@
uint dpalloc (uint size, uint align)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) CFG_IMMR;
uint retloc;
uint align_mask, off;
diff --git a/examples/timer.c b/examples/timer.c
index 037fdfd..13ec06f 100644
--- a/examples/timer.c
+++ b/examples/timer.c
@@ -26,6 +26,8 @@
#include <mpc8xx_irq.h>
#include <exports.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#undef DEBUG
#define TIMER_PERIOD 1000000 /* 1 second clock */
@@ -115,8 +117,6 @@
int timer (int argc, char *argv[])
{
- DECLARE_GLOBAL_DATA_PTR;
-
cpmtimer8xx_t *cpmtimerp; /* Pointer to the CPM Timer structure */
tid_8xx_cpmtimer_t hw;
tid_8xx_cpmtimer_t *hwp = &hw;
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 83ae5e3..ebda719 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -475,11 +475,11 @@
#define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */
#define ICR_TB 0x8 /* transfer byte bit */
#define ICR_MA 0x10 /* master abort */
-#define ICR_SCLE 0x20 /* master clock enable */
+#define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */
#define ICR_IUE 0x40 /* unit enable */
#define ICR_GCD 0x80 /* general call disable */
#define ICR_ITEIE 0x100 /* enable tx interrupts */
-#define ICR_IRFIE 0x200 /* enable rx interrupts */
+#define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */
#define ICR_BEIE 0x400 /* enable bus error ints */
#define ICR_SSDIE 0x800 /* slave STOP detected int enable */
#define ICR_ALDIE 0x1000 /* enable arbitration interrupt */
@@ -821,21 +821,21 @@
#define RTAR __REG(0x40900004) /* RTC Alarm Register */
#define RTSR __REG(0x40900008) /* RTC Status Register */
#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
-#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
-#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
-#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
-#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
-#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
-#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
-#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
-#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
-#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
-#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
-#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
+#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */
+#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */
+#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */
+#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */
+#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */
+#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */
+#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */
+#define RDCR __REG(0x40900010) /* RTC Day Count Register. */
+#define RYCR __REG(0x40900014) /* RTC Year Count Register. */
+#define SWCR __REG(0x40900028) /* Stopwatch Count Register */
+#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */
-#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
-#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
-#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
+#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */
+#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */
+#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
@@ -921,9 +921,10 @@
#ifdef CONFIG_CPU_MONAHANS
#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
-/* Missing: 32 Interrupt priority registers */
-/* mk@tbd: These are the same as beneath for PXA27x: maybe can be
- * merged if GPIO Stuff is same too. */
+/* Missing: 32 Interrupt priority registers
+ * These are the same as beneath for PXA27x: maybe can be merged if
+ * GPIO Stuff is same too.
+ */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */
@@ -983,24 +984,24 @@
#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */
#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */
-#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
+#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */
#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */
-#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
+#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */
#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */
-#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
+#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */
#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */
-#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
+#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */
#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */
-#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
+#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */
#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */
-#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
+#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */
#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */
-#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
+#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */
#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */
-#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
+#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */
#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3)
#define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3)
@@ -1488,8 +1489,8 @@
#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
-#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
-#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
+#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT)
+#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT)
/*
* Power Manager
@@ -1709,10 +1710,10 @@
#define ACCR_13MEND2 (1 << 21)
#define ACCR_PCCE (1 << 11)
-#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
-#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
-#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
-#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
+#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */
+#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */
+#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */
+#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */
#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */
#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */
#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */
@@ -1720,27 +1721,27 @@
#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */
#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */
#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */
-#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
-#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
-#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
-#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
-#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
-#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
-#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
-#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
-#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
-#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
-#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
-#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
+#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */
+#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */
+#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */
+#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */
+#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */
+#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */
+#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */
+#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */
+#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */
+#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */
+#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */
+#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */
#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */
-#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
-#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
+#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */
+#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */
#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */
#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */
#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */
-#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
-#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
+#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */
+#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */
#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */
#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */
#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */
@@ -2382,16 +2383,16 @@
#define KPAS_SO (0x1 << 31)
#define KPASMKPx_SO (0x1 << 31)
-#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
-#define PSLR __REG(0x40F00034)
-#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
-#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
-#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
-#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
-#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
+#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
+#define PSLR __REG(0x40F00034)
+#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */
+#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */
+#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */
+#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */
+#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */
+#define OSMR4 __REG(0x40A00080) /* */
+#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 __REG(0x40A000C0) /* */
#endif /* CONFIG_PXA27X */
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index e1155e2..16e2cc6 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -139,8 +139,18 @@
#define CFG_I2C_RTC_ADDR 0x68
#define CFG_M41T11_BASE_YEAR 1900
+/*
+ * SDRAM configuration (please see cpu/ppc/sdram.[ch])
+ */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
+/* SDRAM timings used in datasheet */
+#define CFG_SDRAM_CL 2
+#define CFG_SDRAM_tRP 20
+#define CFG_SDRAM_tRC 65
+#define CFG_SDRAM_tRCD 20
+#undef CFG_SDRAM_tRFC
+
/*
* Miscellaneous configurable options
*/
diff --git a/include/configs/delta.h b/include/configs/delta.h
index b42a7e2..5edea95 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -49,7 +49,6 @@
/*
* Hardware drivers
*/
-
#undef TURN_ON_ETHERNET
#ifdef TURN_ON_ETHERNET
# define CONFIG_DRIVER_SMC91111 1
@@ -59,10 +58,18 @@
# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */
#endif
+#define CONFIG_HARD_I2C 1 /* required for DA9030 access */
+#define CFG_I2C_SPEED 400000 /* I2C speed */
+#define CFG_I2C_SLAVE 1 /* I2C controllers address */
+#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */
+#define CFG_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */
+#define CFG_I2C_INIT_BOARD 1
+/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */
+
/*
* select serial console configuration
*/
-#define CONFIG_FFUART 1
+#define CONFIG_FFUART 1
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -73,8 +80,13 @@
#ifdef TURN_ON_ETHERNET
# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
#else
-# define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_ENV | CFG_CMD_NAND) \
- & ~(CFG_CMD_NET | CFG_CMD_FLASH | CFG_CMD_IMLS))
+# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
+ | CFG_CMD_ENV \
+ | CFG_CMD_NAND \
+ | CFG_CMD_I2C) \
+ & ~(CFG_CMD_NET \
+ | CFG_CMD_FLASH \
+ | CFG_CMD_IMLS))
#endif
@@ -114,15 +126,19 @@
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_DEVICE_NULLDEV 1
-#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+#define CFG_MEMTEST_START 0x80400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */
-#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
+#define CFG_HZ 3250000 /* incrementer freq: 3.25 MHz */
+
+/* Monahans Core Frequency */
+#define CFG_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */
+#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */
+
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
@@ -144,16 +160,16 @@
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa1000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */
-#define PHYS_SDRAM_3 0xa2000000 /* SDRAM Bank #3 */
+#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */
-#define PHYS_SDRAM_4 0xa3000000 /* SDRAM Bank #4 */
+#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */
-#define CFG_DRAM_BASE 0xa0000000 /* at CS0 */
+#define CFG_DRAM_BASE 0x80000000 /* at CS0 */
#define CFG_DRAM_SIZE 0x04000000 /* 64 MB Ram */
#undef CFG_SKIP_DRAM_SCRUB
@@ -168,8 +184,6 @@
#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE }
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define SECTORSIZE 512
-#define NAND_DELAY_US 25 /* mk@tbd: could be 0, I guess */
/* nand timeout values */
#define CFG_NAND_PROG_ERASE_TO 3000
@@ -178,16 +192,15 @@
#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */
/* NAND Timing Parameters (in ns) */
-#define NAND_TIMING_tCH 10
-#define NAND_TIMING_tCS 0
+#define NAND_TIMING_tCH 10
+#define NAND_TIMING_tCS 0
#define NAND_TIMING_tWH 20
-#define NAND_TIMING_tWP 40
+#define NAND_TIMING_tWP 40
-#define NAND_TIMING_tRH 20
-#define NAND_TIMING_tRP 40
+#define NAND_TIMING_tRH 20
+#define NAND_TIMING_tRP 40
-#define NAND_TIMING_tR 11123
-/* #define NAND_TIMING_tWHR 110 */
+#define NAND_TIMING_tR 11123
#define NAND_TIMING_tWHR 100
#define NAND_TIMING_tAR 10
@@ -199,89 +212,19 @@
#define CONFIG_MTD_DEBUG
#define CONFIG_MTD_DEBUG_VERBOSE 1
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
-#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
-#define CFG_NO_FLASH 1
-#ifndef CGF_NO_FLASH
-/* these are required by the environment code */
-#define PHYS_FLASH_1 CFG_NAND0_BASE /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x04000000 /* 64 MB */
-#define PHYS_FLASH_BANK_SIZE 0x04000000 /* 64 MB Banks */
-#define PHYS_FLASH_SECT_SIZE (SECTORSIZE*1024) /* KB sectors (x2) */
-#endif
+#define CFG_NO_FLASH 1
-/*
- * GPIO settings
- */
-#define CFG_GPSR0_VAL 0x00008000
-#define CFG_GPSR1_VAL 0x00FC0382
-#define CFG_GPSR2_VAL 0x0001FFFF
-#define CFG_GPCR0_VAL 0x00000000
-#define CFG_GPCR1_VAL 0x00000000
-#define CFG_GPCR2_VAL 0x00000000
-#define CFG_GPDR0_VAL 0x0060A800
-#define CFG_GPDR1_VAL 0x00FF0382
-#define CFG_GPDR2_VAL 0x0001C000
-#define CFG_GAFR0_L_VAL 0x98400000
-#define CFG_GAFR0_U_VAL 0x00002950
-#define CFG_GAFR1_L_VAL 0x000A9558
-#define CFG_GAFR1_U_VAL 0x0005AAAA
-#define CFG_GAFR2_L_VAL 0xA0000000
-#define CFG_GAFR2_U_VAL 0x00000002
-
-#define CFG_PSSR_VAL 0x20
-
-/*
- * Memory settings
- */
-#define CFG_MSC0_VAL 0x23F223F2
-#define CFG_MSC1_VAL 0x3FF1A441
-#define CFG_MSC2_VAL 0x7FF97FF1
-#define CFG_MDCNFG_VAL 0x00001AC9
-#define CFG_MDREFR_VAL 0x00018018
-#define CFG_MDMRS_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CFG_MECR_VAL 0x00000000
-#define CFG_MCMEM0_VAL 0x00010504
-#define CFG_MCMEM1_VAL 0x00010504
-#define CFG_MCATT0_VAL 0x00010504
-#define CFG_MCATT1_VAL 0x00010504
-#define CFG_MCIO0_VAL 0x00004715
-#define CFG_MCIO1_VAL 0x00004715
-
-#define _LED 0x08000010
-#define LED_BLANK 0x08000040
-
-/*
- * FLASH and environment organization
- */
-#ifndef CFG_NO_FLASH
-#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */
-
-
-/* NOTE: many default partitioning schemes assume the kernel starts at the
- * second sector, not an environment. You have been warned!
- */
-#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE
-#endif /* #ifndef CFG_NO_FLASH */
-
-/* #define CFG_ENV_IS_NOWHERE */
#define CFG_ENV_IS_IN_NAND 1
#define CFG_ENV_OFFSET 0x40000
+#define CFG_ENV_OFFSET_REDUND 0x44000
#define CFG_ENV_SIZE 0x4000
#endif /* __CONFIG_H */
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 19656fc..aa0901f 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
@@ -71,9 +71,10 @@
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0*/
-#define CFG_SDRAM_TABLE { \
- {(256 << 20), 0x000C4001}, /* 256MB mode 3, 13x10(4) */ \
- {(64 << 20), 0x00082001}} /* 64MB mode 2, 12x9(4) */
+#define CONFIG_SDRAM_ECC /* enable ECC support */
+#define CFG_SDRAM_TABLE { \
+ {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
+ {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */
/*-----------------------------------------------------------------------
* Serial Port
@@ -276,8 +277,8 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
-#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
diff --git a/include/crc.h b/include/crc.h
new file mode 100644
index 0000000..63399bf
--- /dev/null
+++ b/include/crc.h
@@ -0,0 +1,101 @@
+//==========================================================================
+//
+// crc.h
+//
+// Interface for the CRC algorithms.
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 2002 Andrew Lunn
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): Andrew Lunn
+// Contributors: Andrew Lunn
+// Date: 2002-08-06
+// Purpose:
+// Description:
+//
+// This code is part of eCos (tm).
+//
+//####DESCRIPTIONEND####
+//
+//==========================================================================
+
+#ifndef _SERVICES_CRC_CRC_H_
+#define _SERVICES_CRC_CRC_H_
+
+#include <linux/types.h>
+
+#ifndef __externC
+# ifdef __cplusplus
+# define __externC extern "C"
+# else
+# define __externC extern
+# endif
+#endif
+
+// Compute a CRC, using the POSIX 1003 definition
+extern uint32_t
+cyg_posix_crc32(unsigned char *s, int len);
+
+// Gary S. Brown's 32 bit CRC
+
+extern uint32_t
+cyg_crc32(unsigned char *s, int len);
+
+// Gary S. Brown's 32 bit CRC, but accumulate the result from a
+// previous CRC calculation
+
+extern uint32_t
+cyg_crc32_accumulate(uint32_t crc, unsigned char *s, int len);
+
+// Ethernet FCS Algorithm
+
+extern uint32_t
+cyg_ether_crc32(unsigned char *s, int len);
+
+// Ethernet FCS algorithm, but accumulate the result from a previous
+// CRC calculation.
+
+extern uint32_t
+cyg_ether_crc32_accumulate(uint32_t crc, unsigned char *s, int len);
+
+// 16 bit CRC with polynomial x^16+x^12+x^5+1
+
+extern uint16_t cyg_crc16(unsigned char *s, int len);
+
+#endif // _SERVICES_CRC_CRC_H_
+
+
+
diff --git a/include/da9030.h b/include/da9030.h
new file mode 100644
index 0000000..41108b9
--- /dev/null
+++ b/include/da9030.h
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2006 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* DA9030 register definitions */
+#define CID 0x00
+#define EVENT_A 0x01
+#define EVENT_B 0x02
+#define EVENT_C 0x03
+#define STATUS 0x04
+#define IRQ_MASK_A 0x05
+#define IRQ_MASK_B 0x06
+#define IRQ_MASK_C 0x07
+#define SYS_CONTROL_A 0x08
+#define SYS_CONTROL_B 0x09
+#define FAULT_LOG 0x0A
+#define LDO_10_11 0x10
+#define LDO_15 0x11
+#define LDO_14_16 0x12
+#define LDO_18_19 0x13
+#define LDO_17_SIMCP0 0x14
+#define BUCK2_DVC1 0x15
+#define BUCK2_DVC2 0x16
+#define REG_CONTROL_1_17 0x17
+#define REG_CONTROL_2_18 0x18
+#define USBPUMP 0x19
+#define SLEEP_CONTROL 0x1A
+#define STARTUP_CONTROL 0x1B
+#define LED1_CONTROL 0x20
+#define LED2_CONTROL 0x21
+#define LED3_CONTROL 0x22
+#define LED4_CONTROL 0x23
+#define LEDPC_CONTROL 0x24
+#define WLED_CONTROL 0x25
+#define MISC_CONTROLA 0x26
+#define MISC_CONTROLB 0x27
+#define CHARGE_CONTROL 0x28
+#define CCTR_CONTROL 0x29
+#define TCTR_CONTROL 0x2A
+#define CHARGE_PULSE 0x2B
+
+/* ... some missing ...*/
+
+#define LDO1 0x90
+#define LDO2_3 0x91
+#define LDO4_5 0x92
+#define LDO6_SIMCP 0x93
+#define LDO7_8 0x94
+#define LDO9_12 0x95
+#define BUCK 0x96
+#define REG_CONTROL_1_97 0x97
+#define REG_CONTROL_2_98 0x98
+#define REG_SLEEP_CONTROL1 0x99
+#define REG_SLEEP_CONTROL2 0x9A
+#define REG_SLEEP_CONTROL3 0x9B
+#define ADC_MAN_CONTROL 0xA0
+#define ADC_AUTO_CONTROL 0xA1
+#define VBATMON 0xA2
+#define VBATMONTXMON 0xA3
+#define TBATHIGHP 0xA4
+#define TBATHIGHN 0xA5
+#define TBATLOW 0xA6
+#define MAN_RES 0xB0
+#define VBAT_RES 0xB1
+#define VBATMIN_RES 0xB2
+#define VBATMINTXON_RES 0xB3
+#define ICHMAX_RES 0xB4
+#define ICHMIN_RES 0xB5
+#define ICHAVERAGE_RES 0xB6
+#define VCHMAX_RES 0xB7
+#define VCHMIN_RES 0xB8
+#define TBAT_RES 0xB9
+#define ADC_IN4_RES 0xBA
+
+#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */
+#define STATUS_PWREN1 (1<<1) /* PWREN1 value */
+#define STATUS_EXTON (1<<2) /* EXTON value */
+#define STATUS_CHDET (1<<3) /* Charger detection status */
+#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */
+#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */
+#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */
+#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */
+
+#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1
+#define SYS_CONTROL_A_SHUT_DOWN (1<<1)
+#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
+#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
+#define SYS_CONTROL_A_WATCHDOG (1<<7)
diff --git a/include/environment.h b/include/environment.h
index bb10964..422f800 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -69,6 +69,18 @@
# endif
#endif /* CFG_ENV_IS_IN_FLASH */
+#if defined(CFG_ENV_IS_IN_NAND)
+# ifndef CFG_ENV_OFFSET
+# error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND"
+# endif
+# ifndef CFG_ENV_SIZE
+# error "Need to define CFG_ENV_SIZE when using CFG_ENV_IS_IN_NAND"
+# endif
+# ifdef CFG_ENV_OFFSET_REDUND
+# define CFG_REDUNDAND_ENVIRONMENT
+# endif
+#endif /* CFG_ENV_IS_IN_NAND */
+
#ifdef CFG_REDUNDAND_ENVIRONMENT
# define ENV_HEADER_SIZE (sizeof(unsigned long) + 1)
diff --git a/include/xyzModem.h b/include/xyzModem.h
new file mode 100644
index 0000000..a62a174
--- /dev/null
+++ b/include/xyzModem.h
@@ -0,0 +1,112 @@
+//==========================================================================
+//
+// xyzModem.h
+//
+// RedBoot stream handler for xyzModem protocol
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+// Copyright (C) 2002 Gary Thomas
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): gthomas
+// Contributors: gthomas
+// Date: 2000-07-14
+// Purpose:
+// Description:
+//
+// This code is part of RedBoot (tm).
+//
+//####DESCRIPTIONEND####
+//
+//==========================================================================
+
+#ifndef _XYZMODEM_H_
+#define _XYZMODEM_H_
+
+#define xyzModem_xmodem 1
+#define xyzModem_ymodem 2
+// Don't define this until the protocol support is in place
+//#define xyzModem_zmodem 3
+
+#define xyzModem_access -1
+#define xyzModem_noZmodem -2
+#define xyzModem_timeout -3
+#define xyzModem_eof -4
+#define xyzModem_cancel -5
+#define xyzModem_frame -6
+#define xyzModem_cksum -7
+#define xyzModem_sequence -8
+
+#define xyzModem_close 1
+#define xyzModem_abort 2
+
+
+#ifdef REDBOOT
+extern getc_io_funcs_t xyzModem_io;
+#else
+#define CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT
+#define CYGACC_CALL_IF_SET_CONSOLE_COMM(x)
+
+#define diag_vprintf vprintf
+#define diag_printf printf
+#define diag_vsprintf vsprintf
+
+#define CYGACC_CALL_IF_DELAY_US(x) udelay(x)
+
+typedef struct {
+ char *filename;
+ int mode;
+ int chan;
+#ifdef CYGPKG_REDBOOT_NETWORKING
+ struct sockaddr_in *server;
+#endif
+} connection_info_t;
+
+typedef unsigned int bool;
+
+#define false 0
+#define true 1
+
+#endif
+
+
+int xyzModem_stream_open(connection_info_t *info, int *err);
+void xyzModem_stream_close(int *err);
+void xyzModem_stream_terminate(bool method, int (*getc)(void));
+int xyzModem_stream_read(char *buf, int size, int *err);
+char *xyzModem_error(int err);
+
+#endif // _XYZMODEM_H_
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index dba2ff7..56b7fca 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -30,6 +30,8 @@
#include <dataflash.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
/*cmd_boot.c*/
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
@@ -77,8 +79,6 @@
void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong *len_ptr, int verify)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong len = 0, checksum;
ulong initrd_start, initrd_end;
ulong data;
diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c
index 55d13fa..d9dc2b6 100644
--- a/lib_blackfin/board.c
+++ b/lib_blackfin/board.c
@@ -35,6 +35,8 @@
#include "blackfin_board.h"
#include "../drivers/smc91111.h"
+DECLARE_GLOBAL_DATA_PTR;
+
extern flash_info_t flash_info[];
@@ -76,8 +78,6 @@
static int init_baudrate(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uchar tmp[64];
int i = getenv_r("baudrate", tmp, sizeof(tmp));
gd->bd->bi_baudrate = gd->baudrate = (i > 0)
@@ -89,7 +89,6 @@
#ifdef DEBUG
static void display_global_data(void)
{
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd;
bd = gd->bd;
printf("--flags:%x\n", gd->flags);
@@ -136,7 +135,6 @@
void board_init_f(ulong bootflag)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong addr;
bd_t *bd;
@@ -173,7 +171,6 @@
void board_init_r(gd_t * id, ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
ulong size;
extern void malloc_bin_reloc(void);
char *s, *e;
diff --git a/lib_i386/bios_setup.c b/lib_i386/bios_setup.c
index bc97815..75f04a0 100644
--- a/lib_i386/bios_setup.c
+++ b/lib_i386/bios_setup.c
@@ -36,6 +36,8 @@
#include <asm/realmode.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define NUMVECTS 256
#define BIOS_DATA ((char*)0x400)
@@ -136,7 +138,6 @@
int bios_setup(void)
{
- DECLARE_GLOBAL_DATA_PTR;
static int done=0;
int vector;
struct pci_controller *pri_hose;
diff --git a/lib_i386/board.c b/lib_i386/board.c
index e90eb6e..4175fdb1c 100644
--- a/lib_i386/board.c
+++ b/lib_i386/board.c
@@ -38,6 +38,8 @@
#include <ide.h>
#include <asm/u-boot-i386.h>
+DECLARE_GLOBAL_DATA_PTR;
+
extern long _i386boot_start;
extern long _i386boot_end;
extern long _i386boot_romdata_start;
@@ -80,8 +82,6 @@
static int mem_malloc_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* start malloc area right after the stack */
mem_malloc_start = i386boot_bss_start +
i386boot_bss_size + CFG_STACK_SIZE;
@@ -130,8 +130,6 @@
*/
static int init_baudrate (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
char tmp[64]; /* long enough for environment variables */
int i = getenv_r("baudrate", tmp, 64);
@@ -167,7 +165,6 @@
*/
static int display_dram_config (void)
{
- DECLARE_GLOBAL_DATA_PTR;
int i;
puts ("DRAM Configuration:\n");
@@ -233,7 +230,6 @@
void start_i386boot (void)
{
- DECLARE_GLOBAL_DATA_PTR;
char *s;
int i;
ulong size;
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 6b3edd6..e25833b 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -60,6 +60,8 @@
#include <i2c.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
static char *failed = "*** failed ***\n";
#ifdef CONFIG_PCU_E
@@ -111,8 +113,6 @@
*/
static void mem_malloc_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
mem_malloc_end = dest_addr;
@@ -177,8 +177,6 @@
static int init_baudrate (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
uchar tmp[64]; /* long enough for environment variables */
int i = getenv_r ("baudrate", tmp, sizeof (tmp));
@@ -192,8 +190,6 @@
static int init_func_ram (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int board_type = 0; /* use dummy arg */
puts ("DRAM: ");
@@ -263,8 +259,6 @@
void
board_init_f (ulong bootflag)
{
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd;
ulong len, addr, addr_sp;
gd_t *id;
@@ -414,7 +408,6 @@
*/
void board_init_r (gd_t *id, ulong dest_addr)
{
- DECLARE_GLOBAL_DATA_PTR;
cmd_tbl_t *cmdtp;
char *s, *e;
bd_t *bd;
diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c
index a32de1a..f87f56e 100644
--- a/lib_m68k/m68k_linux.c
+++ b/lib_m68k/m68k_linux.c
@@ -27,6 +27,8 @@
#include <zlib.h>
#include <asm/byteorder.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define PHYSADDR(x) x
#define LINUX_MAX_ENVS 256
@@ -56,8 +58,6 @@
void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong * len_ptr, int verify)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong len = 0, checksum;
ulong initrd_start, initrd_end;
ulong data;
diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
index bc987a3..026d247 100644
--- a/lib_microblaze/board.c
+++ b/lib_microblaze/board.c
@@ -28,6 +28,8 @@
#include <version.h>
#include <watchdog.h>
+DECLARE_GLOBAL_DATA_PTR;
+
const char version_string[] =
U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
@@ -72,8 +74,6 @@
void board_init(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd;
init_fnc_t **init_fnc_ptr;
diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c
index 12e8435..952d5a9 100644
--- a/lib_mips/mips_linux.c
+++ b/lib_mips/mips_linux.c
@@ -28,6 +28,8 @@
#include <asm/byteorder.h>
#include <asm/addrspace.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
@@ -56,8 +58,6 @@
void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
ulong addr, ulong * len_ptr, int verify)
{
- DECLARE_GLOBAL_DATA_PTR;
-
ulong len = 0, checksum;
ulong initrd_start, initrd_end;
ulong data;
diff --git a/lib_nios/board.c b/lib_nios/board.c
index e6cda52..0a0d2e3 100644
--- a/lib_nios/board.c
+++ b/lib_nios/board.c
@@ -32,6 +32,7 @@
#include <status_led.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
/*
* All attempts to come up with a "common" initialization sequence
@@ -106,8 +107,6 @@
/***********************************************************************/
void board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd;
init_fnc_t **init_fnc_ptr;
char *s, *e;
diff --git a/lib_nios2/board.c b/lib_nios2/board.c
index 0e0b042..cd23037 100644
--- a/lib_nios2/board.c
+++ b/lib_nios2/board.c
@@ -32,6 +32,7 @@
#include <status_led.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
/*
* All attempts to come up with a "common" initialization sequence
@@ -106,8 +107,6 @@
/***********************************************************************/
void board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd;
init_fnc_t **init_fnc_ptr;
char *s, *e;
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index e569e97..e68cf1f 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -90,6 +90,7 @@
#endif
#include <environment.h>
+
DECLARE_GLOBAL_DATA_PTR;
#if defined(CFG_ENV_IS_EMBEDDED)
diff --git a/net/net.c b/net/net.c
index 5062037..1d1c98f 100644
--- a/net/net.c
+++ b/net/net.c
@@ -92,6 +92,8 @@
#if (CONFIG_COMMANDS & CFG_CMD_NET)
+DECLARE_GLOBAL_DATA_PTR;
+
#define ARP_TIMEOUT 5 /* Seconds before trying ARP again */
#ifndef CONFIG_NET_RETRY_COUNT
# define ARP_TIMEOUT_COUNT 5 /* # of timeouts before giving up */
@@ -266,8 +268,6 @@
int
NetLoop(proto_t protocol)
{
- DECLARE_GLOBAL_DATA_PTR;
-
bd_t *bd = gd->bd;
#ifdef CONFIG_NET_MULTI
@@ -572,9 +572,6 @@
void NetStartAgain (void)
{
-#ifdef CONFIG_NET_MULTI
- DECLARE_GLOBAL_DATA_PTR;
-#endif
char *nretry;
int noretry = 0, once = 0;
diff --git a/post/ether.c b/post/ether.c
index 660620e..8c87b59 100644
--- a/post/ether.c
+++ b/post/ether.c
@@ -51,6 +51,8 @@
#include <net.h>
#include <serial.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define MIN_PACKET_LENGTH 64
#define MAX_PACKET_LENGTH 256
#define TEST_NUM 1
@@ -109,7 +111,6 @@
static void scc_init (int scc_index)
{
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
static int proff[] =
diff --git a/post/memory.c b/post/memory.c
index a10bc50..a2c088b 100644
--- a/post/memory.c
+++ b/post/memory.c
@@ -157,6 +157,8 @@
#if CONFIG_POST & CFG_POST_MEMORY
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Define INJECT_*_ERRORS for testing error detection in the presence of
* _good_ hardware.
@@ -455,7 +457,6 @@
int memory_post_test (int flags)
{
int ret = 0;
- DECLARE_GLOBAL_DATA_PTR;
bd_t *bd = gd->bd;
unsigned long memsize = (bd->bi_memsize >= 256 << 20 ?
256 << 20 : bd->bi_memsize) - (1 << 20);
diff --git a/post/post.c b/post/post.c
index b3df91a..e1066da 100644
--- a/post/post.c
+++ b/post/post.c
@@ -32,14 +32,14 @@
#ifdef CONFIG_POST
+DECLARE_GLOBAL_DATA_PTR;
+
#define POST_MAX_NUMBER 32
#define BOOTMODE_MAGIC 0xDEAD0000
int post_init_f (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int res = 0;
unsigned int i;
@@ -62,7 +62,6 @@
void post_bootmode_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
int bootmode = post_bootmode_get (0);
int newword;
@@ -110,20 +109,17 @@
/* POST tests run before relocation only mark status bits .... */
static void post_log_mark_start ( unsigned long testid )
{
- DECLARE_GLOBAL_DATA_PTR;
gd->post_log_word |= (testid)<<16;
}
static void post_log_mark_succ ( unsigned long testid )
{
- DECLARE_GLOBAL_DATA_PTR;
gd->post_log_word |= testid;
}
/* ... and the messages are output once we are relocated */
void post_output_backlog ( void )
{
- DECLARE_GLOBAL_DATA_PTR;
int j;
for (j = 0; j < post_list_size; j++) {
@@ -379,8 +375,6 @@
void post_reloc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
unsigned int i;
/*
diff --git a/post/sysmon.c b/post/sysmon.c
index 72fcac3..f61d598 100644
--- a/post/sysmon.c
+++ b/post/sysmon.c
@@ -52,6 +52,8 @@
#if CONFIG_POST & CFG_POST_SYSMON
+DECLARE_GLOBAL_DATA_PTR;
+
static int sysmon_temp_invalid = 0;
/* #define DEBUG */
@@ -159,8 +161,6 @@
void sysmon_reloc (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
sysmon_t ** l;
sysmon_table_t * t;
@@ -281,8 +281,6 @@
int sysmon_post_test (int flags)
{
- DECLARE_GLOBAL_DATA_PTR;
-
int res = 0;
sysmon_table_t * t;
uint val;
diff --git a/post/uart.c b/post/uart.c
index 23bf036..fd97e38 100644
--- a/post/uart.c
+++ b/post/uart.c
@@ -50,6 +50,8 @@
#include <command.h>
#include <serial.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#define CTLR_SMC 0
#define CTLR_SCC 1
@@ -82,8 +84,6 @@
static void smc_init (int smc_index)
{
- DECLARE_GLOBAL_DATA_PTR;
-
static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 };
volatile immap_t *im = (immap_t *) CFG_IMMR;
@@ -288,8 +288,6 @@
static void scc_init (int scc_index)
{
- DECLARE_GLOBAL_DATA_PTR;
-
static int cpm_cr_ch[] = {
CPM_CR_CH_SCC1,
CPM_CR_CH_SCC2,