| if ARCH_DAVINCI |
| |
| choice |
| prompt "DaVinci board select" |
| optional |
| |
| config TARGET_DA850EVM |
| bool "DA850 EVM board" |
| select MACH_DAVINCI_DA850_EVM |
| select SOC_DA850 |
| select SUPPORT_SPL |
| |
| config TARGET_OMAPL138_LCDK |
| bool "OMAPL138 LCDK" |
| select SOC_DA8XX |
| select SUPPORT_SPL |
| select SPL_BOARD_INIT |
| |
| config TARGET_LEGOEV3 |
| bool "LEGO MINDSTORMS EV3" |
| select MACH_DAVINCI_DA850_EVM |
| select SOC_DA850 |
| |
| endchoice |
| |
| config SYS_SOC |
| default "davinci" |
| |
| config DA850_LOWLEVEL |
| bool "Enable Lowlevel DA850 initialization" |
| depends on SOC_DA850 |
| |
| config SYS_DA850_PLL_INIT |
| bool |
| |
| config SYS_DA850_DDR_INIT |
| bool |
| |
| config SOC_DA850 |
| bool |
| select SOC_DA8XX |
| |
| config SOC_DA8XX |
| bool |
| select SYS_DA850_DDR_INIT if SUPPORT_SPL || DA850_LOWLEVEL |
| select SYS_DA850_PLL_INIT if SUPPORT_SPL || DA850_LOWLEVEL |
| |
| config MACH_DAVINCI_DA850_EVM |
| bool |
| |
| if SYS_DA850_PLL_INIT |
| comment "DA850 PLL Initialization Parameters" |
| |
| config SYS_DV_CLKMODE |
| int "PLLCTL Clock Mode" |
| default 0 |
| help |
| Set PLLCTL Clock Mode bit as External Clock or On Chip oscillator |
| |
| config SYS_DA850_PLL0_POSTDIV |
| int "PLLC0 PLL Post-Divider" |
| default 1 |
| help |
| Value written to PLLC0 PLL Post-Divider Control Register |
| |
| config SYS_DA850_PLL0_PLLDIV1 |
| hex "PLLC0 Divider 1" |
| default 0x8000 |
| help |
| Value written to PLLC0 Divider 1 register |
| |
| config SYS_DA850_PLL0_PLLDIV2 |
| hex "PLLC0 Divider 2" |
| default 0x8001 |
| help |
| Value written to PLLC0 Divider 2 register |
| |
| config SYS_DA850_PLL0_PLLDIV3 |
| hex "PLLC0 Divider 3" |
| default 0x8002 |
| help |
| Value written to PLLC0 Divider 3 register |
| |
| config SYS_DA850_PLL0_PLLDIV4 |
| hex "PLLC0 Divider 4" |
| default 0x8003 |
| help |
| Value written to PLLC0 Divider 4 register |
| |
| config SYS_DA850_PLL0_PLLDIV5 |
| hex "PLLC0 Divider 5" |
| default 0x8002 |
| help |
| Value written to PLLC0 Divider 5 register |
| |
| config SYS_DA850_PLL0_PLLDIV6 |
| hex "PLLC0 Divider 6" |
| default 0x8000 |
| help |
| Value written to PLLC0 Divider 6 register |
| |
| config SYS_DA850_PLL0_PLLDIV7 |
| hex "PLLC0 Divider 7" |
| default 0x8005 |
| help |
| Value written to PLLC0 Divider 7 register |
| |
| config SYS_DA850_PLL1_POSTDIV |
| hex "PLLC1 PLL Post-Divider" |
| default 1 |
| help |
| Value written to PLLC1 PLL Post-Divider Control Register |
| |
| config SYS_DA850_PLL1_PLLDIV1 |
| hex "PLLC1 Divider 2" |
| default 0x8000 |
| help |
| Value written to PLLC1 Divider 1 register |
| |
| config SYS_DA850_PLL1_PLLDIV2 |
| hex "PLLC1 Divider 2" |
| default 0x8001 |
| help |
| Value written to PLLC1 Divider 2 register |
| |
| config SYS_DA850_PLL1_PLLDIV3 |
| hex "PLLC1 Divider 3" |
| default 0x8002 |
| help |
| Value written to PLLC1 Divider 3 register |
| |
| endif |
| |
| source "board/davinci/da8xxevm/Kconfig" |
| source "board/lego/ev3/Kconfig" |
| |
| config SPL_LDSCRIPT |
| default "board/davinci/da8xxevm/u-boot-spl-da850evm.lds" |
| |
| endif |