blob: ae64096f81147a9cd215fbbb9c74daa9916c9c2a [file] [log] [blame]
/*
* (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
*
* (C) Copyright 2007 Gary Jennejohn garyj@denx.de
* Modified to use the routines in cpu/arm720t/lpc2292/flash.c.
* Heavily modified to support the SMN42 board from Siemens
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/byteorder.h>
#include <asm/arch/hardware.h>
static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST;
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong);
extern int lpc2292_flash_erase(flash_info_t *, int, int);
extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong);
static unsigned long ext_flash_init(void);
static int ext_flash_erase(flash_info_t *, int, int);
static int ext_write_buff(flash_info_t *, uchar *, ulong, ulong);
/*-----------------------------------------------------------------------
*/
ulong flash_init (void)
{
int j, k;
ulong size = 0;
ulong flashbase = 0;
flash_info[0].flash_id = PHILIPS_LPC2292;
flash_info[0].size = 0x003E000; /* 256 - 8 KB */
flash_info[0].sector_count = 17;
memset (flash_info[0].protect, 0, 17);
flashbase = 0x00000000;
for (j = 0, k = 0; j < 8; j++, k++) {
flash_info[0].start[k] = flashbase;
flashbase += 0x00002000;
}
for (j = 0; j < 2; j++, k++) {
flash_info[0].start[k] = flashbase;
flashbase += 0x00010000;
}
for (j = 0; j < 7; j++, k++) {
flash_info[0].start[k] = flashbase;
flashbase += 0x00002000;
}
size += flash_info[0].size;
/* Protect monitor and environment sectors */
flash_protect (FLAG_PROTECT_SET,
0x0,
0x0 + monitor_flash_len - 1,
&flash_info[0]);
flash_protect (FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
&flash_info[0]);
size += ext_flash_init();
return size;
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t * info)
{
int i;
int erased = 0;
unsigned long j;
unsigned long count;
unsigned char *p;
switch (info->flash_id & FLASH_VENDMASK) {
case (PHILIPS_LPC2292 & FLASH_VENDMASK):
printf("Philips: ");
break;
case FLASH_MAN_AMD:
printf("AMD: ");
break;
default:
printf ("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
printf("LPC2292 internal flash\n");
break;
case FLASH_S29GL128N:
printf ("S29GL128N (128 Mbit, uniform sector size)\n");
break;
default:
printf("Unknown Chip Type\n");
return;
}
printf (" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 5) == 0) {
printf ("\n ");
}
if (i < (info->sector_count - 1)) {
count = info->start[i+1] - info->start[i];
}
else {
count = info->start[0] + info->size - info->start[i];
}
p = (unsigned char*)(info->start[i]);
erased = 1;
for (j = 0; j < count; j++) {
if (*p != 0xFF) {
erased = 0;
break;
}
p++;
}
printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ",
erased ? " E" : " ");
}
printf ("\n");
}
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
switch (info->flash_id & FLASH_TYPEMASK) {
case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
return lpc2292_flash_erase(info, s_first, s_last);
case FLASH_S29GL128N:
return ext_flash_erase(info, s_first, s_last);
default:
return ERR_PROTECTED;
}
return ERR_PROTECTED;
}
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
switch (info->flash_id & FLASH_TYPEMASK) {
case (PHILIPS_LPC2292 & FLASH_TYPEMASK):
return lpc2292_write_buff(info, src, addr, cnt);
case FLASH_S29GL128N:
return ext_write_buff(info, src, addr, cnt);
default:
return ERR_PROG_ERROR;
}
return ERR_PROG_ERROR;
}
/*--------------------------------------------------------------------------
* From here on is code for the external S29GL128N taken from cam5200_flash.c
*/
#define CFG_FLASH_WORD_SIZE unsigned short
static int wait_for_DQ7_32(flash_info_t * info, int sect)
{
ulong start, now, last;
volatile CFG_FLASH_WORD_SIZE *addr =
(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
(CFG_FLASH_WORD_SIZE) 0x00800080) {
if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc('.');
last = now;
}
}
return 0;
}
int ext_flash_erase(flash_info_t * info, int s_first, int s_last)
{
volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
volatile CFG_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect, ret;
ret = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN)
printf("- missing\n");
else
printf("- no sectors to erase\n");
return 1;
}
if (info->flash_id == FLASH_UNKNOWN) {
printf("Can't erase unknown flash type - aborted\n");
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect])
prot++;
}
if (prot)
printf("- Warning: %d protected sectors will not be erased!", prot);
printf("\n");
l_sect = -1;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
l_sect = sect;
/*
* Wait for each sector to complete, it's more
* reliable. According to AMD Spec, you must
* issue all erase commands within a specified
* timeout. This has been seen to fail, especially
* if printf()s are included (for debug)!!
*/
ret = wait_for_DQ7_32(info, sect);
if (ret) {
ret = ERR_PROTECTED;
break;
}
}
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay(1000);
/* reset to read mode */
addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
if (ret)
printf(" error\n");
else
printf(" done\n");
return ret;
}
static ulong flash_get_size(vu_long * addr, flash_info_t * info)
{
short i;
CFG_FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
/* Write auto select command: read Manufacturer ID */
addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
udelay(1000);
value = addr2[0];
switch (value) {
case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
value = addr2[1]; /* device ID */
switch (value) {
case (CFG_FLASH_WORD_SIZE)AMD_ID_MIRROR:
value = addr2[14];
switch(value) {
case (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_2:
value = addr2[15];
if (value != (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_3) {
info->flash_id = FLASH_UNKNOWN;
} else {
info->flash_id += FLASH_S29GL128N;
info->sector_count = 128;
info->size = 0x01000000;
}
break;
default:
info->flash_id = FLASH_UNKNOWN;
return(0);
}
break;
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* => no or unknown flash */
}
/* set up sector start address table */
for (i = 0; i < info->sector_count; i++)
info->start[i] = base + (i * 0x00020000);
/* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
info->protect[i] = addr2[2] & 1;
}
/* issue bank reset to return to read mode */
addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
return (info->size);
}
static unsigned long ext_flash_init(void)
{
unsigned long total_b = 0;
unsigned long size_b[CFG_MAX_FLASH_BANKS];
int i;
/* Init: no FLASHes known */
for (i = 1; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
/* call flash_get_size() to initialize sector address */
size_b[i] = flash_get_size((vu_long *) flash_addr_table[i],
&flash_info[i]);
flash_info[i].size = size_b[i];
if (flash_info[i].flash_id == FLASH_UNKNOWN) {
printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
i+1, size_b[i], size_b[i] << 20);
flash_info[i].sector_count = -1;
flash_info[i].size = 0;
}
total_b += flash_info[i].size;
}
return total_b;
}
static int write_word(flash_info_t * info, ulong dest, ushort data)
{
volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) &data;
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*dest2 & *data2) != *data2) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
*dest2 = *data2;
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* data polling for D7 */
start = get_timer(0);
while ((*dest2 & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
(*data2 & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
printf("WRITE_TOUT\n");
return (1);
}
}
return (0);
}
/*-----------------------------------------------------------------------
* This is taken from the original flash.c for the LPC2292 SODIMM board
* and modified to suit.
*/
int ext_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ushort tmp;
ulong i;
uchar* src_org;
uchar* dst_org;
ulong cnt_org = cnt;
int ret = ERR_OK;
src_org = src;
dst_org = (uchar*)addr;
if (addr & 1) { /* if odd address */
tmp = *((uchar*)(addr - 1)); /* little endian */
tmp |= (*src << 8);
if (write_word(info, addr - 1, tmp))
return ERR_PROG_ERROR;
addr += 1;
cnt -= 1;
src++;
}
while (cnt > 1) {
tmp = ((*(src+1)) << 8) + (*src); /* little endian */
if (write_word(info, addr, tmp))
return ERR_PROG_ERROR;
addr += 2;
src += 2;
cnt -= 2;
}
if (cnt > 0) {
tmp = (*((uchar*)(addr + 1))) << 8;
tmp |= *src;
if (write_word(info, addr, tmp))
return ERR_PROG_ERROR;
}
for (i = 0; i < cnt_org; i++) {
if (*dst_org != *src_org) {
printf("Write failed. Byte %lX differs\n", i);
ret = ERR_PROG_ERROR;
break;
}
dst_org++;
src_org++;
}
return ret;
}