blob: ee5d411e4b6291f0b91b55f3af189208a7eb5dab [file] [log] [blame]
/*
* Cache-handling routined for MIPS CPUs
*
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/asm.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>
#define RA t8
/*
* 16kB is the maximum size of instruction and data caches on MIPS 4K,
* 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
*
* Note that the above size is the maximum size of primary cache. U-Boot
* doesn't have L2 cache support for now.
*/
#define MIPS_MAX_CACHE_SIZE 0x10000
#define INDEX_BASE CKSEG0
.macro cache_op op addr
.set push
.set noreorder
.set mips3
cache \op, 0(\addr)
.set pop
.endm
/*
* cacheop macro to automate cache operations
* first some helpers...
*/
#define _mincache(size, maxsize) \
bltu size,maxsize,9f ; \
move size,maxsize ; \
9:
#define _align(minaddr, maxaddr, linesize) \
.set noat ; \
subu AT,linesize,1 ; \
not AT ; \
and minaddr,AT ; \
addu maxaddr,-1 ; \
and maxaddr,AT ; \
.set at
/* general operations */
#define doop1(op1) \
cache op1,0(a0)
#define doop2(op1, op2) \
cache op1,0(a0) ; \
nop ; \
cache op2,0(a0)
/* specials for cache initialisation */
#define doop1lw(op1) \
lw zero,0(a0)
#define doop1lw1(op1) \
cache op1,0(a0) ; \
lw zero,0(a0) ; \
cache op1,0(a0)
#define doop121(op1,op2) \
cache op1,0(a0) ; \
nop; \
cache op2,0(a0) ; \
nop; \
cache op1,0(a0)
#define _oploopn(minaddr, maxaddr, linesize, tag, ops) \
.set noreorder ; \
10: doop##tag##ops ; \
bne minaddr,maxaddr,10b ; \
add minaddr,linesize ; \
.set reorder
/* finally the cache operation macros */
#define vcacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
blez n,11f ; \
addu n,kva ; \
_align(kva, n, cacheLineSize) ; \
_oploopn(kva, n, cacheLineSize, tag, ops) ; \
11:
#define icacheopn(kva, n, cacheSize, cacheLineSize, tag, ops) \
_mincache(n, cacheSize); \
blez n,11f ; \
addu n,kva ; \
_align(kva, n, cacheLineSize) ; \
_oploopn(kva, n, cacheLineSize, tag, ops) ; \
11:
#define vcacheop(kva, n, cacheSize, cacheLineSize, op) \
vcacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
#define icacheop(kva, n, cacheSize, cacheLineSize, op) \
icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
.macro f_fill64 dst, offset, val
LONG_S \val, (\offset + 0 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 1 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 2 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 3 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 4 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 5 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 6 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 7 * LONGSIZE)(\dst)
#if LONGSIZE == 4
LONG_S \val, (\offset + 8 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 9 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 10 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 11 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 12 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 13 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 14 * LONGSIZE)(\dst)
LONG_S \val, (\offset + 15 * LONGSIZE)(\dst)
#endif
.endm
/*
* mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
*/
LEAF(mips_init_icache)
blez a1, 9f
mtc0 zero, CP0_TAGLO
/* clear tag to invalidate */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
1: cache_op Index_Store_Tag_I t0
PTR_ADDU t0, a2
bne t0, t1, 1b
/* fill once, so data field parity is correct */
PTR_LI t0, INDEX_BASE
2: cache_op Fill t0
PTR_ADDU t0, a2
bne t0, t1, 2b
/* invalidate again - prudent but not strictly neccessary */
PTR_LI t0, INDEX_BASE
1: cache_op Index_Store_Tag_I t0
PTR_ADDU t0, a2
bne t0, t1, 1b
9: jr ra
END(mips_init_icache)
/*
* mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
*/
LEAF(mips_init_dcache)
blez a1, 9f
mtc0 zero, CP0_TAGLO
/* clear all tags */
PTR_LI t0, INDEX_BASE
PTR_ADDU t1, t0, a1
1: cache_op Index_Store_Tag_D t0
PTR_ADDU t0, a2
bne t0, t1, 1b
/* load from each line (in cached space) */
PTR_LI t0, INDEX_BASE
2: LONG_L zero, 0(t0)
PTR_ADDU t0, a2
bne t0, t1, 2b
/* clear all tags */
PTR_LI t0, INDEX_BASE
1: cache_op Index_Store_Tag_D t0
PTR_ADDU t0, a2
bne t0, t1, 1b
9: jr ra
END(mips_init_dcache)
/*******************************************************************************
*
* mips_cache_reset - low level initialisation of the primary caches
*
* This routine initialises the primary caches to ensure that they
* have good parity. It must be called by the ROM before any cached locations
* are used to prevent the possibility of data with bad parity being written to
* memory.
* To initialise the instruction cache it is essential that a source of data
* with good parity is available. This routine
* will initialise an area of memory starting at location zero to be used as
* a source of parity.
*
* RETURNS: N/A
*
*/
NESTED(mips_cache_reset, 0, ra)
move RA, ra
li t2, CFG_ICACHE_SIZE
li t3, CFG_DCACHE_SIZE
li t4, CFG_CACHELINE_SIZE
move t5, t4
li v0, MIPS_MAX_CACHE_SIZE
/*
* Now clear that much memory starting from zero.
*/
PTR_LI a0, CKSEG1
PTR_ADDU a1, a0, v0
2: PTR_ADDIU a0, 64
f_fill64 a0, -64, zero
bne a0, a1, 2b
/*
* The caches are probably in an indeterminate state,
* so we force good parity into them by doing an
* invalidate, load/fill, invalidate for each line.
*/
/*
* Assume bottom of RAM will generate good parity for the cache.
*/
/*
* Initialize the I-cache first,
*/
move a1, t2
move a2, t4
PTR_LA t7, mips_init_icache
jalr t7
/*
* then initialize D-cache.
*/
move a1, t3
move a2, t5
PTR_LA t7, mips_init_dcache
jalr t7
jr RA
END(mips_cache_reset)
/*******************************************************************************
*
* dcache_status - get cache status
*
* RETURNS: 0 - cache disabled; 1 - cache enabled
*
*/
LEAF(dcache_status)
mfc0 t0, CP0_CONFIG
li t1, CONF_CM_UNCACHED
andi t0, t0, CONF_CM_CMASK
move v0, zero
beq t0, t1, 2f
li v0, 1
2: jr ra
END(dcache_status)
/*******************************************************************************
*
* dcache_disable - disable cache
*
* RETURNS: N/A
*
*/
LEAF(dcache_disable)
mfc0 t0, CP0_CONFIG
li t1, -8
and t0, t0, t1
ori t0, t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
jr ra
END(dcache_disable)
/*******************************************************************************
*
* dcache_enable - enable cache
*
* RETURNS: N/A
*
*/
LEAF(dcache_enable)
mfc0 t0, CP0_CONFIG
ori t0, CONF_CM_CMASK
xori t0, CONF_CM_CMASK
ori t0, CONF_CM_CACHABLE_NONCOHERENT
mtc0 t0, CP0_CONFIG
jr ra
END(dcache_enable)
#ifdef CFG_INIT_RAM_LOCK_MIPS
/*******************************************************************************
*
* mips_cache_lock - lock RAM area pointed to by a0 in cache.
*
* RETURNS: N/A
*
*/
#if defined(CONFIG_PURPLE)
# define CACHE_LOCK_SIZE (CFG_DCACHE_SIZE/2)
#else
# define CACHE_LOCK_SIZE (CFG_DCACHE_SIZE)
#endif
.globl mips_cache_lock
.ent mips_cache_lock
mips_cache_lock:
li a1, CKSEG0 - CACHE_LOCK_SIZE
addu a0, a1
li a2, CACHE_LOCK_SIZE
li a3, CFG_CACHELINE_SIZE
move a1, a2
icacheop(a0,a1,a2,a3,0x1d)
jr ra
.end mips_cache_lock
#endif /* CFG_INIT_RAM_LOCK_MIPS */