| /* |
| * (C) Copyright 2000-2007 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * CPU specific code |
| * |
| * written or collected and sometimes rewritten by |
| * Magnus Damm <damm@bitsmart.com> |
| * |
| * minor modifications by |
| * Wolfgang Denk <wd@denx.de> |
| */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <command.h> |
| #include <asm/cache.h> |
| #include <ppc4xx.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| void board_reset(void); |
| |
| #if defined(CONFIG_405GP) || \ |
| defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ |
| defined(CONFIG_440EPX) || defined(CONFIG_440GRX) |
| |
| #define PCI_ASYNC |
| |
| static int pci_async_enabled(void) |
| { |
| #if defined(CONFIG_405GP) |
| return (mfdcr(strap) & PSR_PCI_ASYNC_EN); |
| #endif |
| |
| #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ |
| defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ |
| defined(CONFIG_460EX) || defined(CONFIG_460GT) |
| unsigned long val; |
| |
| mfsdr(sdr_sdstp1, val); |
| return (val & SDR0_SDSTP1_PAME_MASK); |
| #endif |
| } |
| #endif |
| |
| #if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \ |
| !defined(CONFIG_405) && !defined(CONFIG_405EX) |
| static int pci_arbiter_enabled(void) |
| { |
| #if defined(CONFIG_405GP) |
| return (mfdcr(strap) & PSR_PCI_ARBIT_EN); |
| #endif |
| |
| #if defined(CONFIG_405EP) |
| return (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN); |
| #endif |
| |
| #if defined(CONFIG_440GP) |
| return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK); |
| #endif |
| |
| #if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) |
| unsigned long val; |
| |
| mfsdr(sdr_xcr, val); |
| return (val & 0x80000000); |
| #endif |
| #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ |
| defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ |
| defined(CONFIG_460EX) || defined(CONFIG_460GT) |
| unsigned long val; |
| |
| mfsdr(sdr_pci0, val); |
| return (val & 0x80000000); |
| #endif |
| } |
| #endif |
| |
| #if defined(CONFIG_405EP) |
| #define I2C_BOOTROM |
| |
| static int i2c_bootrom_enabled(void) |
| { |
| #if defined(CONFIG_405EP) |
| return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP); |
| #else |
| unsigned long val; |
| |
| mfsdr(sdr_sdcs, val); |
| return (val & SDR0_SDCS_SDD); |
| #endif |
| } |
| #endif |
| |
| #if defined(CONFIG_440GX) |
| #define SDR0_PINSTP_SHIFT 29 |
| static char *bootstrap_str[] = { |
| "EBC (16 bits)", |
| "EBC (8 bits)", |
| "EBC (32 bits)", |
| "EBC (8 bits)", |
| "PCI", |
| "I2C (Addr 0x54)", |
| "Reserved", |
| "I2C (Addr 0x50)", |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' }; |
| #endif |
| |
| #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) |
| #define SDR0_PINSTP_SHIFT 30 |
| static char *bootstrap_str[] = { |
| "EBC (8 bits)", |
| "PCI", |
| "I2C (Addr 0x54)", |
| "I2C (Addr 0x50)", |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'D'}; |
| #endif |
| |
| #if defined(CONFIG_440EP) || defined(CONFIG_440GR) |
| #define SDR0_PINSTP_SHIFT 29 |
| static char *bootstrap_str[] = { |
| "EBC (8 bits)", |
| "PCI", |
| "NAND (8 bits)", |
| "EBC (16 bits)", |
| "EBC (16 bits)", |
| "I2C (Addr 0x54)", |
| "PCI", |
| "I2C (Addr 0x52)", |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; |
| #endif |
| |
| #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) |
| #define SDR0_PINSTP_SHIFT 29 |
| static char *bootstrap_str[] = { |
| "EBC (8 bits)", |
| "EBC (16 bits)", |
| "EBC (16 bits)", |
| "NAND (8 bits)", |
| "PCI", |
| "I2C (Addr 0x54)", |
| "PCI", |
| "I2C (Addr 0x52)", |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; |
| #endif |
| |
| #if defined(CONFIG_460EX) || defined(CONFIG_460GT) |
| #define SDR0_PINSTP_SHIFT 29 |
| static char *bootstrap_str[] = { |
| "EBC (8 bits)", |
| "EBC (16 bits)", |
| "PCI", |
| "PCI", |
| "EBC (16 bits)", |
| "NAND (8 bits)", |
| "I2C (Addr 0x54)", /* A8 */ |
| "I2C (Addr 0x52)", /* A4 */ |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; |
| #endif |
| |
| #if defined(CONFIG_460SX) |
| #define SDR0_PINSTP_SHIFT 29 |
| static char *bootstrap_str[] = { |
| "EBC (8 bits)", |
| "EBC (16 bits)", |
| "EBC (32 bits)", |
| "NAND (8 bits)", |
| "I2C (Addr 0x54)", /* A8 */ |
| "I2C (Addr 0x52)", /* A4 */ |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G' }; |
| #endif |
| |
| #if defined(CONFIG_405EZ) |
| #define SDR0_PINSTP_SHIFT 28 |
| static char *bootstrap_str[] = { |
| "EBC (8 bits)", |
| "SPI (fast)", |
| "NAND (512 page, 4 addr cycle)", |
| "I2C (Addr 0x50)", |
| "EBC (32 bits)", |
| "I2C (Addr 0x50)", |
| "NAND (2K page, 5 addr cycle)", |
| "I2C (Addr 0x50)", |
| "EBC (16 bits)", |
| "Reserved", |
| "NAND (2K page, 4 addr cycle)", |
| "I2C (Addr 0x50)", |
| "NAND (512 page, 3 addr cycle)", |
| "I2C (Addr 0x50)", |
| "SPI (slow)", |
| "I2C (Addr 0x50)", |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \ |
| 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' }; |
| #endif |
| |
| #if defined(CONFIG_405EX) |
| #define SDR0_PINSTP_SHIFT 29 |
| static char *bootstrap_str[] = { |
| "EBC (8 bits)", |
| "EBC (16 bits)", |
| "EBC (16 bits)", |
| "NAND (8 bits)", |
| "NAND (8 bits)", |
| "I2C (Addr 0x54)", |
| "EBC (8 bits)", |
| "I2C (Addr 0x52)", |
| }; |
| static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; |
| #endif |
| |
| #if defined(SDR0_PINSTP_SHIFT) |
| static int bootstrap_option(void) |
| { |
| unsigned long val; |
| |
| mfsdr(SDR_PINSTP, val); |
| return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT); |
| } |
| #endif /* SDR0_PINSTP_SHIFT */ |
| |
| |
| #if defined(CONFIG_440) |
| static int do_chip_reset (unsigned long sys0, unsigned long sys1) |
| { |
| /* Changes to cpc0_sys0 and cpc0_sys1 require chip |
| * reset. |
| */ |
| mtdcr (cntrl0, mfdcr (cntrl0) | 0x80000000); /* Set SWE */ |
| mtdcr (cpc0_sys0, sys0); |
| mtdcr (cpc0_sys1, sys1); |
| mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000); /* Clr SWE */ |
| mtspr (dbcr0, 0x20000000); /* Reset the chip */ |
| |
| return 1; |
| } |
| #endif |
| |
| |
| int checkcpu (void) |
| { |
| #if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */ |
| uint pvr = get_pvr(); |
| ulong clock = gd->cpu_clk; |
| char buf[32]; |
| |
| #if !defined(CONFIG_IOP480) |
| char addstr[64] = ""; |
| sys_info_t sys_info; |
| |
| puts ("CPU: "); |
| |
| get_sys_info(&sys_info); |
| |
| #if defined(CONFIG_XILINX_440) |
| puts("IBM PowerPC 4"); |
| #else |
| puts("AMCC PowerPC 4"); |
| #endif |
| |
| #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ |
| defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ |
| defined(CONFIG_405EX) |
| puts("05"); |
| #endif |
| #if defined(CONFIG_440) |
| #if defined(CONFIG_460EX) || defined(CONFIG_460GT) |
| puts("60"); |
| #else |
| puts("40"); |
| #endif |
| #endif |
| |
| switch (pvr) { |
| case PVR_405GP_RB: |
| puts("GP Rev. B"); |
| break; |
| |
| case PVR_405GP_RC: |
| puts("GP Rev. C"); |
| break; |
| |
| case PVR_405GP_RD: |
| puts("GP Rev. D"); |
| break; |
| |
| #ifdef CONFIG_405GP |
| case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */ |
| puts("GP Rev. E"); |
| break; |
| #endif |
| |
| case PVR_405CR_RA: |
| puts("CR Rev. A"); |
| break; |
| |
| case PVR_405CR_RB: |
| puts("CR Rev. B"); |
| break; |
| |
| #ifdef CONFIG_405CR |
| case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */ |
| puts("CR Rev. C"); |
| break; |
| #endif |
| |
| case PVR_405GPR_RB: |
| puts("GPr Rev. B"); |
| break; |
| |
| case PVR_405EP_RB: |
| puts("EP Rev. B"); |
| break; |
| |
| case PVR_405EZ_RA: |
| puts("EZ Rev. A"); |
| break; |
| |
| case PVR_405EX1_RA: |
| puts("EX Rev. A"); |
| strcpy(addstr, "Security support"); |
| break; |
| |
| case PVR_405EX2_RA: |
| puts("EX Rev. A"); |
| strcpy(addstr, "No Security support"); |
| break; |
| |
| case PVR_405EXR1_RA: |
| puts("EXr Rev. A"); |
| strcpy(addstr, "Security support"); |
| break; |
| |
| case PVR_405EXR2_RA: |
| puts("EXr Rev. A"); |
| strcpy(addstr, "No Security support"); |
| break; |
| |
| case PVR_405EX1_RC: |
| puts("EX Rev. C"); |
| strcpy(addstr, "Security support"); |
| break; |
| |
| case PVR_405EX2_RC: |
| puts("EX Rev. C"); |
| strcpy(addstr, "No Security support"); |
| break; |
| |
| case PVR_405EXR1_RC: |
| puts("EXr Rev. C"); |
| strcpy(addstr, "Security support"); |
| break; |
| |
| case PVR_405EXR2_RC: |
| puts("EXr Rev. C"); |
| strcpy(addstr, "No Security support"); |
| break; |
| |
| #if defined(CONFIG_440) |
| case PVR_440GP_RB: |
| puts("GP Rev. B"); |
| /* See errata 1.12: CHIP_4 */ |
| if ((mfdcr(cpc0_sys0) != mfdcr(cpc0_strp0)) || |
| (mfdcr(cpc0_sys1) != mfdcr(cpc0_strp1)) ){ |
| puts ( "\n\t CPC0_SYSx DCRs corrupted. " |
| "Resetting chip ...\n"); |
| udelay( 1000 * 1000 ); /* Give time for serial buf to clear */ |
| do_chip_reset ( mfdcr(cpc0_strp0), |
| mfdcr(cpc0_strp1) ); |
| } |
| break; |
| |
| case PVR_440GP_RC: |
| puts("GP Rev. C"); |
| break; |
| |
| case PVR_440GX_RA: |
| puts("GX Rev. A"); |
| break; |
| |
| case PVR_440GX_RB: |
| puts("GX Rev. B"); |
| break; |
| |
| case PVR_440GX_RC: |
| puts("GX Rev. C"); |
| break; |
| |
| case PVR_440GX_RF: |
| puts("GX Rev. F"); |
| break; |
| |
| case PVR_440EP_RA: |
| puts("EP Rev. A"); |
| break; |
| |
| #ifdef CONFIG_440EP |
| case PVR_440EP_RB: /* 440EP rev B and 440GR rev A have same PVR */ |
| puts("EP Rev. B"); |
| break; |
| |
| case PVR_440EP_RC: /* 440EP rev C and 440GR rev B have same PVR */ |
| puts("EP Rev. C"); |
| break; |
| #endif /* CONFIG_440EP */ |
| |
| #ifdef CONFIG_440GR |
| case PVR_440GR_RA: /* 440EP rev B and 440GR rev A have same PVR */ |
| puts("GR Rev. A"); |
| break; |
| |
| case PVR_440GR_RB: /* 440EP rev C and 440GR rev B have same PVR */ |
| puts("GR Rev. B"); |
| break; |
| #endif /* CONFIG_440GR */ |
| #endif /* CONFIG_440 */ |
| |
| #ifdef CONFIG_440EPX |
| case PVR_440EPX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ |
| puts("EPx Rev. A"); |
| strcpy(addstr, "Security/Kasumi support"); |
| break; |
| |
| case PVR_440EPX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ |
| puts("EPx Rev. A"); |
| strcpy(addstr, "No Security/Kasumi support"); |
| break; |
| #endif /* CONFIG_440EPX */ |
| |
| #ifdef CONFIG_440GRX |
| case PVR_440GRX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ |
| puts("GRx Rev. A"); |
| strcpy(addstr, "Security/Kasumi support"); |
| break; |
| |
| case PVR_440GRX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */ |
| puts("GRx Rev. A"); |
| strcpy(addstr, "No Security/Kasumi support"); |
| break; |
| #endif /* CONFIG_440GRX */ |
| |
| case PVR_440SP_6_RAB: |
| puts("SP Rev. A/B"); |
| strcpy(addstr, "RAID 6 support"); |
| break; |
| |
| case PVR_440SP_RAB: |
| puts("SP Rev. A/B"); |
| strcpy(addstr, "No RAID 6 support"); |
| break; |
| |
| case PVR_440SP_6_RC: |
| puts("SP Rev. C"); |
| strcpy(addstr, "RAID 6 support"); |
| break; |
| |
| case PVR_440SP_RC: |
| puts("SP Rev. C"); |
| strcpy(addstr, "No RAID 6 support"); |
| break; |
| |
| case PVR_440SPe_6_RA: |
| puts("SPe Rev. A"); |
| strcpy(addstr, "RAID 6 support"); |
| break; |
| |
| case PVR_440SPe_RA: |
| puts("SPe Rev. A"); |
| strcpy(addstr, "No RAID 6 support"); |
| break; |
| |
| case PVR_440SPe_6_RB: |
| puts("SPe Rev. B"); |
| strcpy(addstr, "RAID 6 support"); |
| break; |
| |
| case PVR_440SPe_RB: |
| puts("SPe Rev. B"); |
| strcpy(addstr, "No RAID 6 support"); |
| break; |
| |
| case PVR_460EX_RA: |
| puts("EX Rev. A"); |
| strcpy(addstr, "No Security/Kasumi support"); |
| break; |
| |
| case PVR_460EX_SE_RA: |
| puts("EX Rev. A"); |
| strcpy(addstr, "Security/Kasumi support"); |
| break; |
| |
| case PVR_460GT_RA: |
| puts("GT Rev. A"); |
| strcpy(addstr, "No Security/Kasumi support"); |
| break; |
| |
| case PVR_460GT_SE_RA: |
| puts("GT Rev. A"); |
| strcpy(addstr, "Security/Kasumi support"); |
| break; |
| |
| case PVR_460SX_RA: |
| puts("SX Rev. A"); |
| strcpy(addstr, "Security support"); |
| break; |
| |
| case PVR_460SX_RA_V1: |
| puts("SX Rev. A"); |
| strcpy(addstr, "No Security support"); |
| break; |
| |
| case PVR_460GX_RA: |
| puts("GX Rev. A"); |
| strcpy(addstr, "Security support"); |
| break; |
| |
| case PVR_460GX_RA_V1: |
| puts("GX Rev. A"); |
| strcpy(addstr, "No Security support"); |
| break; |
| |
| case PVR_VIRTEX5: |
| puts("x5 VIRTEX5"); |
| break; |
| |
| default: |
| printf (" UNKNOWN (PVR=%08x)", pvr); |
| break; |
| } |
| |
| printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock), |
| sys_info.freqPLB / 1000000, |
| get_OPB_freq() / 1000000, |
| sys_info.freqEBC / 1000000); |
| |
| if (addstr[0] != 0) |
| printf(" %s\n", addstr); |
| |
| #if defined(I2C_BOOTROM) |
| printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); |
| #endif /* I2C_BOOTROM */ |
| #if defined(SDR0_PINSTP_SHIFT) |
| printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]); |
| printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); |
| #endif /* SDR0_PINSTP_SHIFT */ |
| |
| #if defined(CONFIG_PCI) && !defined(CONFIG_405EX) |
| printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis"); |
| #endif |
| |
| #if defined(PCI_ASYNC) |
| if (pci_async_enabled()) { |
| printf (", PCI async ext clock used"); |
| } else { |
| printf (", PCI sync clock at %lu MHz", |
| sys_info.freqPLB / sys_info.pllPciDiv / 1000000); |
| } |
| #endif |
| |
| #if defined(CONFIG_PCI) && !defined(CONFIG_405EX) |
| putc('\n'); |
| #endif |
| |
| #if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) |
| printf (" 16 kB I-Cache 16 kB D-Cache"); |
| #elif defined(CONFIG_440) |
| printf (" 32 kB I-Cache 32 kB D-Cache"); |
| #else |
| printf (" 16 kB I-Cache %d kB D-Cache", |
| ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8); |
| #endif |
| #endif /* !defined(CONFIG_IOP480) */ |
| |
| #if defined(CONFIG_IOP480) |
| printf ("PLX IOP480 (PVR=%08x)", pvr); |
| printf (" at %s MHz:", strmhz(buf, clock)); |
| printf (" %u kB I-Cache", 4); |
| printf (" %u kB D-Cache", 2); |
| #endif |
| |
| #endif /* !defined(CONFIG_405) */ |
| |
| putc ('\n'); |
| |
| return 0; |
| } |
| |
| int ppc440spe_revB() { |
| unsigned int pvr; |
| |
| pvr = get_pvr(); |
| if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) |
| { |
| #if defined(CONFIG_BOARD_RESET) |
| board_reset(); |
| #else |
| #if defined(CFG_4xx_RESET_TYPE) |
| mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28); |
| #else |
| /* |
| * Initiate system reset in debug control register DBCR |
| */ |
| mtspr(dbcr0, 0x30000000); |
| #endif /* defined(CFG_4xx_RESET_TYPE) */ |
| #endif /* defined(CONFIG_BOARD_RESET) */ |
| |
| return 1; |
| } |
| |
| |
| /* |
| * Get timebase clock frequency |
| */ |
| unsigned long get_tbclk (void) |
| { |
| #if !defined(CONFIG_IOP480) |
| sys_info_t sys_info; |
| |
| get_sys_info(&sys_info); |
| return (sys_info.freqProcessor); |
| #else |
| return (66000000); |
| #endif |
| |
| } |
| |
| |
| #if defined(CONFIG_WATCHDOG) |
| void watchdog_reset(void) |
| { |
| int re_enable = disable_interrupts(); |
| reset_4xx_watchdog(); |
| if (re_enable) enable_interrupts(); |
| } |
| |
| void reset_4xx_watchdog(void) |
| { |
| /* |
| * Clear TSR(WIS) bit |
| */ |
| mtspr(tsr, 0x40000000); |
| } |
| #endif /* CONFIG_WATCHDOG */ |