| /** @file IxEthDB.h |
| * |
| * @brief this file contains the public API of @ref IxEthDB component |
| * |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Intel Corporation nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * @par |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * @par |
| * -- End of Copyright Notice -- |
| * |
| */ |
| |
| #ifndef IxEthDB_H |
| #define IxEthDB_H |
| |
| #include <IxOsBuffMgt.h> |
| #include <IxTypes.h> |
| |
| /** |
| * @defgroup IxEthDB IXP400 Ethernet Database (IxEthDB) API |
| * |
| * @brief ethDB is a library that does provides a MAC address database learning/filtering capability |
| * |
| *@{ |
| */ |
| |
| #define INLINE __inline__ |
| |
| #define IX_ETH_DB_PRIVATE PRIVATE /* imported from IxTypes.h */ |
| |
| #define IX_ETH_DB_PUBLIC PUBLIC |
| |
| /** |
| * @brief port ID => message handler NPE id conversion (0 => NPE_B, 1 => NPE_C) |
| */ |
| #define IX_ETH_DB_PORT_ID_TO_NPE(id) (id == 0 ? 1 : (id == 1 ? 2 : (id == 2 ? 0 : -1))) |
| |
| /** |
| * @def IX_ETH_DB_NPE_TO_PORT_ID(npe) |
| * @brief message handler NPE id => port ID conversion (NPE_B => 0, NPE_C => 1) |
| */ |
| #define IX_ETH_DB_NPE_TO_PORT_ID(npe) (npe == 0 ? 2 : (npe == 1 ? 0 : (npe == 2 ? 1 : -1))) |
| |
| /* temporary define - won't work for Azusa */ |
| #define IX_ETH_DB_PORT_ID_TO_NPE_LOGICAL_ID(id) (IX_ETH_DB_PORT_ID_TO_NPE(id) << 4) |
| #define IX_ETH_DB_NPE_LOGICAL_ID_TO_PORT_ID(id) (IX_ETH_DB_NPE_TO_PORT_ID(id >> 4)) |
| |
| /** |
| * @def IX_IEEE803_MAC_ADDRESS_SIZE |
| * @brief The size of the MAC address |
| */ |
| #define IX_IEEE803_MAC_ADDRESS_SIZE (6) |
| |
| /** |
| * @def IX_IEEE802_1Q_QOS_PRIORITY_COUNT |
| * @brief Number of QoS priorities defined by IEEE802.1Q |
| */ |
| #define IX_IEEE802_1Q_QOS_PRIORITY_COUNT (8) |
| |
| /** |
| * @enum IxEthDBStatus |
| * @brief Ethernet Database API return values |
| */ |
| typedef enum /* IxEthDBStatus */ |
| { |
| IX_ETH_DB_SUCCESS = IX_SUCCESS, /**< Success */ |
| IX_ETH_DB_FAIL = IX_FAIL, /**< Failure */ |
| IX_ETH_DB_INVALID_PORT, /**< Invalid port */ |
| IX_ETH_DB_PORT_UNINITIALIZED, /**< Port not initialized */ |
| IX_ETH_DB_MAC_UNINITIALIZED, /**< MAC not initialized */ |
| IX_ETH_DB_INVALID_ARG, /**< Invalid argument */ |
| IX_ETH_DB_NO_SUCH_ADDR, /**< Address not found for search or delete operations */ |
| IX_ETH_DB_NOMEM, /**< Learning database memory full */ |
| IX_ETH_DB_BUSY, /**< Learning database cannot complete operation, access temporarily blocked */ |
| IX_ETH_DB_END, /**< Database browser passed the end of the record set */ |
| IX_ETH_DB_INVALID_VLAN, /**< Invalid VLAN ID (valid range is 0..4094, 0 signifies no VLAN membership, used for priority tagged frames) */ |
| IX_ETH_DB_INVALID_PRIORITY, /**< Invalid QoS priority/traffic class (valid range for QoS priority is 0..7, valid range for traffic class depends on run-time configuration) */ |
| IX_ETH_DB_NO_PERMISSION, /**< No permission for attempted operation */ |
| IX_ETH_DB_FEATURE_UNAVAILABLE, /**< Feature not available (or not enabled) */ |
| IX_ETH_DB_INVALID_KEY, /**< Invalid search key */ |
| IX_ETH_DB_INVALID_RECORD_TYPE /**< Invalid record type */ |
| } IxEthDBStatus; |
| |
| /** @brief VLAN ID type, valid range is 0..4094, 0 signifying no VLAN membership */ |
| typedef UINT32 IxEthDBVlanId; |
| |
| /** @brief 802.1Q VLAN tag, contains 3 bits user priority, 1 bit CFI, 12 bits VLAN ID */ |
| typedef UINT32 IxEthDBVlanTag; |
| |
| /** @brief QoS priority/traffic class type, valid range is 0..7, 0 being the lowest */ |
| typedef UINT32 IxEthDBPriority; |
| |
| /** @brief Priority mapping table; 0..7 QoS priorities used to index, table contains traffic classes */ |
| typedef UINT8 IxEthDBPriorityTable[8]; |
| |
| /** @brief A 4096 bit array used to map the complete VLAN ID range */ |
| typedef UINT8 IxEthDBVlanSet[512]; |
| |
| #define IX_ETH_DB_802_1Q_VLAN_MASK (0xFFF) |
| #define IX_ETH_DB_802_1Q_QOS_MASK (0x7) |
| |
| #define IX_ETH_DB_802_1Q_MAX_VLAN_ID (0xFFE) |
| |
| /** |
| * @def IX_ETH_DB_SET_VLAN_ID |
| * @brief returns the given 802.1Q tag with the VLAN ID field substituted with the given VLAN ID |
| * |
| * This macro is used to change the VLAN ID in a 802.1Q tag. |
| * |
| * Example: |
| * |
| * tag = IX_ETH_DB_SET_VLAN_ID(tag, 32) |
| * |
| * inserts the VLAN ID "32" in the given tag. |
| */ |
| #define IX_ETH_DB_SET_VLAN_ID(vlanTag, vlanID) (((vlanTag) & 0xF000) | ((vlanID) & IX_ETH_DB_802_1Q_VLAN_MASK)) |
| |
| /** |
| * @def IX_ETH_DB_GET_VLAN_ID |
| * @brief returns the VLAN ID from the given 802.1Q tag |
| */ |
| #define IX_ETH_DB_GET_VLAN_ID(vlanTag) ((vlanTag) & IX_ETH_DB_802_1Q_VLAN_MASK) |
| |
| #define IX_ETH_DB_GET_QOS_PRIORITY(vlanTag) (((vlanTag) >> 13) & IX_ETH_DB_802_1Q_QOS_MASK) |
| |
| #define IX_ETH_DB_SET_QOS_PRIORITY(vlanTag, priority) (((vlanTag) & 0x1FFF) | (((priority) & IX_ETH_DB_802_1Q_QOS_MASK) << 13)) |
| |
| #define IX_ETH_DB_CHECK_VLAN_TAG(vlanTag) { if(((vlanTag & 0xFFFF0000) != 0) || (IX_ETH_DB_GET_VLAN_ID(vlanTag) > 4094)) return IX_ETH_DB_INVALID_VLAN; } |
| |
| #define IX_ETH_DB_CHECK_VLAN_ID(vlanId) { if (vlanId > IX_ETH_DB_802_1Q_MAX_VLAN_ID) return IX_ETH_DB_INVALID_VLAN; } |
| |
| #define IX_IEEE802_1Q_VLAN_TPID (0x8100) |
| |
| typedef enum |
| { |
| IX_ETH_DB_UNTAGGED_FRAMES = 0x1, /**< Accepts untagged frames */ |
| IX_ETH_DB_VLAN_TAGGED_FRAMES = 0x2, /**< Accepts tagged frames */ |
| IX_ETH_DB_PRIORITY_TAGGED_FRAMES = 0x4, /**< Accepts tagged frames with VLAN ID set to 0 (no VLAN membership) */ |
| IX_ETH_DB_ACCEPT_ALL_FRAMES = |
| IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES /**< Accepts all the frames */ |
| } IxEthDBFrameFilter; |
| |
| typedef enum |
| { |
| IX_ETH_DB_PASS_THROUGH = 0x1, /**< Leave frame as-is */ |
| IX_ETH_DB_ADD_TAG = 0x2, /**< Add default port VLAN tag */ |
| IX_ETH_DB_REMOVE_TAG = 0x3 /**< Remove VLAN tag from frame */ |
| } IxEthDBTaggingAction; |
| |
| typedef enum |
| { |
| IX_ETH_DB_FIREWALL_WHITE_LIST = 0x1, /**< Firewall operates in white-list mode (MAC address based admission) */ |
| IX_ETH_DB_FIREWALL_BLACK_LIST = 0x2 /**< Firewall operates in black-list mode (MAC address based blocking) */ |
| } IxEthDBFirewallMode; |
| |
| typedef enum |
| { |
| IX_ETH_DB_FILTERING_RECORD = 0x01, /**< <table><caption> Filtering record </caption> |
| * <tr><td> MAC address <td> static/dynamic type <td> age |
| * </table> |
| */ |
| IX_ETH_DB_FILTERING_VLAN_RECORD = 0x02, /**< <table><caption> VLAN-enabled filtering record </caption> |
| * <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag |
| * </table> |
| */ |
| IX_ETH_DB_WIFI_RECORD = 0x04, /**< <table><caption> WiFi header conversion record </caption> |
| * <tr><td> MAC address <td> optional gateway MAC address <td> |
| * </table> |
| */ |
| IX_ETH_DB_FIREWALL_RECORD = 0x08, /**< <table><caption> Firewall record </caption> |
| * <tr><td> MAC address |
| * </table> |
| */ |
| IX_ETH_DB_GATEWAY_RECORD = 0x10, /**< <i>For internal use only</i> */ |
| IX_ETH_DB_MAX_RECORD_TYPE_INDEX = 0x10, /**< <i>For internal use only</i> */ |
| IX_ETH_DB_NO_RECORD_TYPE = 0, /**< None of the registered record types */ |
| IX_ETH_DB_ALL_FILTERING_RECORDS = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD, /**< All the filtering records */ |
| IX_ETH_DB_ALL_RECORD_TYPES = IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | |
| IX_ETH_DB_WIFI_RECORD | IX_ETH_DB_FIREWALL_RECORD /**< All the record types registered within EthDB */ |
| } IxEthDBRecordType; |
| |
| typedef enum |
| { |
| IX_ETH_DB_LEARNING = 0x01, /**< Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records */ |
| IX_ETH_DB_FILTERING = 0x02, /**< Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature */ |
| IX_ETH_DB_VLAN_QOS = 0x04, /**< VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes */ |
| IX_ETH_DB_FIREWALL = 0x08, /**< Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists */ |
| IX_ETH_DB_SPANNING_TREE_PROTOCOL = 0x10, /**< Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes */ |
| IX_ETH_DB_WIFI_HEADER_CONVERSION = 0x20 /**< WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data */ |
| } IxEthDBFeature; |
| |
| typedef UINT32 IxEthDBProperty; /**< Property ID type */ |
| |
| typedef enum |
| { |
| IX_ETH_DB_INTEGER_PROPERTY = 0x1, /**< 4 byte unsigned integer type */ |
| IX_ETH_DB_STRING_PROPERTY = 0x2, /**< NULL-terminated string type of maximum 255 characters (including the terminator) */ |
| IX_ETH_DB_MAC_ADDR_PROPERTY = 0x3, /**< 6 byte MAC address type */ |
| IX_ETH_DB_BOOL_PROPERTY = 0x4 /**< 4 byte boolean type; can contain only TRUE and FALSE values */ |
| } IxEthDBPropertyType; |
| |
| /* list of supported properties for the IX_ETH_DB_VLAN_QOS feature */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY (0x01) /**< Property identifying number the supported number of traffic classes */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY (0x10) /**< Rx queue assigned to traffic class 0 */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY (0x11) /**< Rx queue assigned to traffic class 1 */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY (0x12) /**< Rx queue assigned to traffic class 2 */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY (0x13) /**< Rx queue assigned to traffic class 3 */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY (0x14) /**< Rx queue assigned to traffic class 4 */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY (0x15) /**< Rx queue assigned to traffic class 5 */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY (0x16) /**< Rx queue assigned to traffic class 6 */ |
| #define IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY (0x17) /**< Rx queue assigned to traffic class 7 */ |
| |
| /* private property used by EthAcc to indicate queue configuration complete */ |
| #define IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (0x18) |
| |
| /** |
| * |
| * @brief The IEEE 802.3 Ethernet MAC address structure. |
| * |
| * The data should be packed with bytes xx:xx:xx:xx:xx:xx |
| * |
| * @note The data must be packed in network byte order. |
| */ |
| typedef struct |
| { |
| UINT8 macAddress[IX_IEEE803_MAC_ADDRESS_SIZE]; |
| } IxEthDBMacAddr; |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @brief Definition of an IXP400 port. |
| */ |
| typedef UINT32 IxEthDBPortId; |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @brief Port dependency map definition |
| */ |
| typedef UINT8 IxEthDBPortMap[32]; |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBInit(void) |
| * |
| * @brief Initializes the Ethernet learning/filtering database |
| * |
| * @note calling this function multiple times does not constitute an error; |
| * redundant calls will be ignored, returning IX_ETH_DB_SUCCESS |
| * |
| * @retval IX_ETH_DB_SUCCESS initialization was successful |
| * @retval IX_ETH_DB_FAIL initialization failed (OS error) |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBInit(void); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBUnload(void) |
| * |
| * @brief Stops and prepares the EthDB component for unloading. |
| * |
| * @retval IX_ETH_DB_SUCCESS de-initialization was successful |
| * @retval IX_ETH_DB_BUSY de-initialization failed, ports must be disabled first |
| * @retval IX_ETH_DB_FAIL de-initialization failed (OS error) |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBUnload(void); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn void ixEthDBPortInit(IxEthDBPortId portID) |
| * |
| * @brief Initializes a port |
| * |
| * This function is called automatically by the Ethernet Access |
| * ixEthAccPortInit() routine for Ethernet NPE ports and should be manually |
| * called for any user-defined port (any port that is not one of |
| * the two Ethernet NPEs). |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to be initialized |
| * |
| * @see IxEthDBPortDefs.h for port definitions |
| * |
| * @note calling this function multiple times does not constitute an error; |
| * redundant calls will be ignored |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBPortInit(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID) |
| * |
| * @brief Enables a port |
| * |
| * This function is called automatically from the Ethernet Access component |
| * ixEthAccPortEnable() routine for Ethernet NPE ports and should be manually |
| * called for any user-defined port (any port that is not one of |
| * the Ethernet NPEs). |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to enable processing on |
| * |
| * @retval IX_ETH_DB_SUCCESS if enabling is successful |
| * @retval IX_ETH_DB_FAIL if the enabling was not successful due to |
| * a message handler error |
| * @retval IX_ETH_DB_MAC_UNINITIALIZED the MAC address of this port was |
| * not initialized (only for Ethernet NPEs) |
| * @retval IX_ETH_DB_INVALID_PORT if portID is invalid |
| * |
| * @pre ixEthDBPortAddressSet needs to be called prior to enabling the port events |
| * for Ethernet NPEs |
| * |
| * @see ixEthDBPortAddressSet |
| * |
| * @see IxEthDBPortDefs.h for port definitions |
| * |
| * @note calling this function multiple times does not constitute an error; |
| * redundant calls will be ignored |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortEnable(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID) |
| * |
| * @brief Disables processing on a port |
| * |
| * This function is called automatically from the Ethernet Access component |
| * ixEthAccPortDisable() routine for Ethernet NPE ports and should be manually |
| * called for any user-defined port (any port that is not one of |
| * the Ethernet NPEs). |
| * |
| * @note Calling ixEthAccPortDisable() will disable the respective Ethernet NPE. |
| * After Ethernet NPEs are disabled they are stopped therefore |
| * when re-enabled they need to be reset, downloaded with microcode and started. |
| * For learning to restart working the user needs to call again |
| * ixEthAccPortUnicastMacAddressSet or ixEthDBUnicastAddressSet |
| * with the respective port MAC address. |
| * Residual MAC addresses learnt before the port was disabled are deleted as soon |
| * as the port is disabled. This only applies to dynamic (learnt) entries, static |
| * entries do not dissapear when the port is disabled. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to disable processing on |
| * |
| * @retval IX_ETH_DB_SUCCESS if disabling is successful |
| * @retval IX_ETH_DB_FAIL if the disabling was not successful due to |
| * a message handler error |
| * @retval IX_ETH_DB_INVALID_PORT if portID is invalid |
| * |
| * @note calling this function multiple times after the first time completed successfully |
| * does not constitute an error; redundant calls will be ignored and return IX_ETH_DB_SUCCESS |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortDisable(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Sets the port MAC address |
| * |
| * This function is to be called from the Ethernet Access component top-level |
| * ixEthDBUnicastAddressSet(). Event processing cannot be enabled for a port |
| * until its MAC address has been set. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port whose MAC address is set |
| * @param macAddr @ref IxEthDBMacAddr [in] - port MAC address |
| * |
| * @retval IX_ETH_DB_SUCCESS MAC address was set successfully |
| * @retval IX_ETH_DB_FAIL MAC address was not set due to a message handler failure |
| * @retval IX_ETH_DB_INVALID_PORT if the port is not an Ethernet NPE |
| * |
| * @see IxEthDBPortDefs.h for port definitions |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortAddressSet(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize) |
| * |
| * @brief Set the maximum frame size supported on the given port ID |
| * |
| * This functions set the maximum frame size supported on a specific port ID |
| * |
| * - Reentrant - yes |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to configure |
| * @param maximumFrameSize UINT32 [in] - maximum frame size to configure |
| * |
| * @retval IX_ETH_DB_SUCCESS the port is configured |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED the port has not been initialized |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_INVALID_ARG size parameter is out of range |
| * @retval IX_ETH_DB_NO_PERMISSION selected port is not an Ethernet NPE |
| * @retval IX_FAIL unknown OS or NPE communication error |
| * |
| * @note |
| * This maximum frame size is used to filter the frames based on their |
| * destination addresses and the capabilities of the destination port. |
| * The mximum value that can be set for a NPE port is 16320. |
| * (IX_ETHNPE_ACC_FRAME_LENGTH_MAX) |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringPortMaximumFrameSizeSet(IxEthDBPortId portID, UINT32 maximumFrameSize); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Populate the Ethernet learning/filtering database with a static MAC address |
| * |
| * Populates the Ethernet learning/filtering database with a static MAC address. The entry will not be subject to aging. |
| * If there is an entry (static or dynamic) with the corresponding MAC address on any port this entry will take precedence. |
| * Any other entry with the same MAC address will be removed. |
| * |
| * - Reentrant - yes |
| * - ISR Callable - yes |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to add the static address to |
| * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add |
| * |
| * @retval IX_ETH_DB_SUCCESS the add was successful |
| * @retval IX_ETH_DB_FAIL failed to populate the database entry |
| * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringStaticEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Populate the Ethernet learning/filtering database with a dynamic MAC address |
| * |
| * Populates the Ethernet learning/filtering database with a dynamic MAC address. This entry will be subject to normal |
| * aging function, if aging is enabled on its port. |
| * If there is an entry (static or dynamic) with the same MAC address on any port this entry will take precedence. |
| * Any other entry with the same MAC address will be removed. |
| * |
| * - Reentrant - yes |
| * - ISR Callable - yes |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to add the dynamic address to |
| * @param macAddr @ref IxEthDBMacAddr [in] - static MAC address to add |
| * |
| * @retval IX_ETH_DB_SUCCESS the add was successful |
| * @retval IX_ETH_DB_FAIL failed to populate the database entry |
| * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringDynamicEntryProvision(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr) |
| * |
| * @brief Removes a MAC address entry from the Ethernet learning/filtering database |
| * |
| * @param macAddr IxEthDBMacAddr [in] - MAC address to remove |
| * |
| * - Reentrant - yes |
| * - ISR Callable - no |
| * |
| * @retval IX_ETH_DB_SUCCESS the removal was successful |
| * @retval IX_ETH_DB_NO_SUCH_ADDR failed to remove the address (not in the database) |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_BUSY failed due to a temporary busy condition (i.e. lack of CPU cycles), try again later |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringEntryDelete(IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Search the Ethernet learning/filtering database for the given MAC address and port ID |
| * |
| * This functions searches the database for a specific port ID and MAC address. Both the port ID |
| * and the MAC address have to match in order for the record to be reported as found. |
| * |
| * - Reentrant - yes |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to search for |
| * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for |
| * |
| * @retval IX_ETH_DB_SUCCESS the record exists in the database |
| * @retval IX_ETH_DB_INVALID_ARG invalid macAddr pointer argument |
| * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringPortSearch(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Search the Ethernet learning/filtering database for a MAC address and return the port ID |
| * |
| * Searches the database for a MAC address. The function returns the portID for the |
| * MAC address record, if found. If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. |
| * The portID is only valid if the function finds a match. |
| * |
| * - Reentrant - yes |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID the address belongs to (populated only on a successful search) |
| * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to search for |
| * |
| * @retval IX_ETH_DB_SUCCESS the record exists in the database |
| * @retval IX_ETH_DB_NO_SUCH_ADDR the record was not found in the database |
| * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s) |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringDatabaseSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Search the filtering database for a MAC address, return the port ID and reset the record age |
| * |
| * Searches the database for a MAC address. The function returns the portID for the |
| * MAC address record and resets the entry age to 0, if found. |
| * If no match is found the function returns IX_ETH_DB_NO_SUCH_ADDR. |
| * The portID is only valid if the function finds a match. |
| * |
| * - Reentrant - yes |
| * - ISR Callable - no |
| * |
| * @retval IX_ETH_DB_SUCCESS the MAC address was found |
| * @retval IX_ETH_DB_NO_SUCH_ADDR the MAC address was not found |
| * @retval IX_ETH_DB_INVALID_ARG invalid macAddr or portID pointer argument(s) |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringPortUpdatingSearch(IxEthDBPortId *portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @def IX_ETH_DB_MAINTENANCE_TIME |
| * |
| * @brief The @ref ixEthDBDatabaseMaintenance must be called by the user at a frequency of |
| * IX_ETH_DB_MAINTENANCE_TIME |
| * |
| */ |
| #define IX_ETH_DB_MAINTENANCE_TIME (1 * 60) /* 1 Minute */ |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @def IX_ETH_DB_LEARNING_ENTRY_AGE_TIME |
| * |
| * @brief The define specifies the filtering database age entry time. Static entries older than |
| * IX_ETH_DB_LEARNING_ENTRY_AGE_TIME +/- IX_ETH_DB_MAINTENANCE_TIME shall be removed. |
| * |
| */ |
| #define IX_ETH_DB_LEARNING_ENTRY_AGE_TIME (15 * 60 ) /* 15 Mins */ |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID) |
| * |
| * @brief Disable the aging function for a specific port |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to disable aging on |
| * |
| * - Reentrant - yes |
| * - ISR Callable - no |
| * |
| * @retval IX_ETH_DB_SUCCESS aging disabled successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortAgingDisable(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID) |
| * |
| * @brief Enable the aging function for a specific port |
| * |
| * Enables the aging of dynamic MAC address entries stored in the learning/filtering database |
| * |
| * @note The aging function relies on the @ref ixEthDBDatabaseMaintenance being called with a period of |
| * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. |
| * |
| * - Reentrant - yes |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to enable aging on |
| * |
| * @retval IX_ETH_DB_SUCCESS aging enabled successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE learning feature is disabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortAgingEnable(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn void ixEthDBDatabaseMaintenance(void) |
| * |
| * @brief Performs a maintenance operation on the Ethernet learning/filtering database |
| * |
| * In order to perform a database maintenance this function must be called every |
| * @ref IX_ETH_DB_MAINTENANCE_TIME seconds. It should be called regardless of whether learning is |
| * enabled or not. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @note this function call will be ignored if the learning feature is disabled |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBDatabaseMaintenance(void); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID) |
| * |
| * @brief This function displays the Mac Ethernet MAC address filtering tables. |
| * |
| * It displays the MAC address, port ID, entry type (dynamic/static),and age for |
| * the given port ID. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to display the MAC address entries |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized |
| * @retval IX_ETH_DB_FAIL record browser failed due to an internal busy or lock condition |
| * |
| * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead |
| * |
| * @see ixEthDBFilteringDatabaseShowRecords |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringDatabaseShow(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn void ixEthDBFilteringDatabaseShowAll(void) |
| * |
| * @brief Displays the MAC address recorded in the filtering database for all registered |
| * ports (see IxEthDBPortDefs.h), grouped by port ID. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @retval void |
| * |
| * @note this function is deprecated and kept for compatibility reasons; use @ref ixEthDBFilteringDatabaseShowRecords instead |
| * |
| * @see ixEthDBFilteringDatabaseShowRecords |
| */ |
| IX_ETH_DB_PUBLIC |
| void ixEthDBFilteringDatabaseShowAll(void); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter) |
| * |
| * @brief This function displays per port database records, given a record type filter |
| * |
| * The supported record type filters are: |
| * |
| * - IX_ETH_DB_FILTERING_RECORD - displays the non-VLAN filtering records (MAC address, age, static/dynamic) |
| * - IX_ETH_DB_FILTERING_VLAN_RECORD - displays the VLAN filtering records (MAC address, age, static/dynamic, VLAN ID, CFI, QoS class) |
| * - IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD - displays the previous two types of records |
| * - IX_ETH_DB_WIFI_RECORD - displays the WiFi header conversion records (MAC address, optional gateway MAC address) and WiFi header conversion parameters (BBSID, Duration/ID) |
| * - IX_ETH_DB_FIREWALL_RECORD - displays the firewall MAC address table and firewall operating mode (white list/black list) |
| * - IX_ETH_DB_ALL_RECORD_TYPES - displays all the record types |
| * - IX_ETH_DB_NO_RECORD_TYPE - displays only the port status (no records are displayed) |
| * |
| * Additionally, the status of each port will be displayed, containg the following information: type, capabilities, enabled status, |
| * aging enabled status, group membership and maximum frame size. |
| * |
| * The port ID can either be an actual port or IX_ETH_DB_ALL_PORTS, in which case the requested information |
| * will be displayed for all the ports (grouped by port) |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID ID of the port to display information on (use IX_ETH_DB_ALL_PORTS for all the ports) |
| * @param recordFilter record type filter |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is invalid |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port ID is not initialized |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBRecordType recordFilter); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) |
| * |
| * @brief Sets the dependency port map for a port |
| * |
| * @param portID ID of the port to set the dependency map to |
| * @param dependencyPortMap new dependency map (as bitmap, each bit set indicates a port being included) |
| * |
| * This function is used to share filtering information between ports. |
| * By adding a port into another port's dependency map the target port |
| * filtering data will import the filtering data from the port it depends on. |
| * Any changes to filtering data for a port - such as adding, updating or removing records - |
| * will trigger updates in the filtering information for all the ports depending on |
| * on the updated port. |
| * |
| * For example, if ports 2 and 3 are set in the port 0 dependency map the filtering |
| * information for port 0 will also include the filtering information from ports 2 and 3. |
| * Adding a record to port 2 will also trigger an update not only on port 2 but also on |
| * port 0. |
| * |
| * The dependency map is a 256 bit array where each bit corresponds to a port corresponding to the |
| * bit offset (bit 0 - port 0, bit 1 - port 1 etc). Setting a bit to 1 indicates that the corresponding |
| * port is the port map. For example, a dependency port map of 0x14 consists in the ports with IDs 2 and 4. |
| * Note that the last bit (offset 255) is reserved and should never be set (it will be automatically |
| * cleared by the function). |
| * |
| * By default, each port has a dependency port map consisting only of itself, i.e. |
| * |
| * @verbatim |
| IxEthDBPortMap portMap; |
| |
| // clear all ports from port map |
| memset(portMap, 0, sizeof (portMap)); |
| |
| // include portID in port map |
| portMap[portID / 8] = 1 << (portID % 8); |
| @endverbatim |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @note Setting dependency maps is useful for NPE ports, which benefit from automatic updates |
| * of filtering information. Setting dependency maps for user-defined ports is not an error |
| * but will have no actual effect. |
| * |
| * @note Including a port in its own dependency map is not compulsory, however note that |
| * in this case updating the port will not trigger an update on the port itself, which |
| * might not be the intended behavior |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortDependencyMapSet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap) |
| * |
| * @brief Retrieves the dependency port map for a port |
| * |
| * @param portID ID of the port to set the dependency map to |
| * @param dependencyPortMap location where the port dependency map is to be copied |
| * |
| * This function will copy the port dependency map to a user specified location. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>dependencyPortMap</i> pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Filtering is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortDependencyMapGet(IxEthDBPortId portID, IxEthDBPortMap dependencyPortMap); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag) |
| * |
| * @brief Sets the default 802.1Q VLAN tag for a given port |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to set the default VLAN tag to |
| * @param vlanTag @ref IxEthDBVlanTag [in] - default 802.1Q VLAN tag |
| * |
| * The tag format has 16 bits and it is defined in the IEEE802.1Q specification. |
| * This tag will be used for tagging untagged frames (if enabled) and classifying |
| * unexpedited traffic into an internal traffic class (using the user priority field). |
| * |
| * <table border="1"> <caption> 802.1Q tag format </caption> |
| * <tr> <td> <b> 3 bits <td> <b> 1 bit <td> <b> 12 bits </b> |
| * <tr> <td> user priority <td> CFI <td> VID |
| * </table> |
| * |
| * User Priority : Defines user priority, giving eight (2^3) priority levels. IEEE 802.1P defines |
| * the operation for these 3 user priority bits |
| * |
| * CFI : Canonical Format Indicator is always set to zero for Ethernet switches. CFI is used for |
| * compatibility reason between Ethernet type network and Token Ring type network. If a frame received |
| * at an Ethernet port has a CFI set to 1, then that frame should not be forwarded as it is to an untagged port. |
| * |
| * VID : VLAN ID is the identification of the VLAN, which is basically used by the standard 802.1Q. |
| * It has 12 bits and allow the id entification of 4096 (2^12) VLANs. Of the 4096 possible VIDs, a VID of 0 |
| * is used to identify priority frames and value 4095 (FFF) is reserved, so the maximum possible VLAN |
| * configurations are 4,094. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag |
| * |
| * @note a VLAN ID value of 0 indicates that the port is not part of any VLAN |
| * @note the value of the cannonical frame indicator (CFI) field is ignored, the |
| * field being used only in frame tagging operations |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanTagSet(IxEthDBPortId portID, IxEthDBVlanTag vlanTag); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag) |
| * |
| * @brief Retrieves the default 802.1Q port VLAN tag for a given port (see also @ref ixEthDBPortVlanTagSet) |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the default VLAN tag from |
| * @param vlanTag @ref IxEthDBVlanTag [out] - location to write the default port 802.1Q VLAN tag to |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid vlanTag pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanTagGet(IxEthDBPortId portID, IxEthDBVlanTag *vlanTag); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag) |
| * |
| * @brief Sets the 802.1Q VLAN tag for a database record |
| * |
| * @param macAddr MAC address |
| * @param vlanTag 802.1Q VLAN tag |
| * |
| * This function is used together with @ref ixEthDBVlanTagGet to provide MAC-based VLAN classification support. |
| * Please note that the bridging application must contain specific code to make use of this feature (see below). |
| * |
| * VLAN tags can be set only in IX_ETH_DB_FILTERING_RECORD or IX_ETH_DB_FILTERING_VLAN_RECORD type records. |
| * If to an IX_ETH_DB_FILTERING_RECORD type record is added a VLAN tag the record type is automatically |
| * changed to IX_ETH_DB_FILTERING_VLAN_RECORD. Once this has occurred the record type will never |
| * revert to a non-VLAN type (unless deleted and re-added). |
| * |
| * Record types used for different purposes (such as IX_ETH_DB_WIFI_RECORD) will be ignored by |
| * this function. |
| * |
| * After using this function to associate a VLAN ID with a MAC address the VLAN ID can be extracted knowing the |
| * MAC address using @ref ixEthDBVlanTagGet. This mechanism can be used to implement MAC-based VLAN classification |
| * if a bridging application searches for the VLAN tag when receiving a frame based on the source MAC address |
| * (contained in the <i>ixp_ne_src_mac</i> field of the buffer header). |
| * If found in the database, the application can instruct the NPE to tag the frame by writing the VLAN tag |
| * in the <i>ixp_ne_vlan_tci</i> field of the buffer header. This way the NPE will inspect the Egress tagging |
| * rule associated with the given VLAN ID on the Tx port and tag the frame if Egress tagging on the VLAN is |
| * allowed. Additionally, Egress tagging can be forced by setting the <i>ixp_ne_tx_flags.tag_over</i> and |
| * <i>ixp_ne_tx_flags.tag_mode</i> flags in the buffer header. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @note this function will <b>not</b> add a filtering record, it can only be used to update an existing one |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer |
| * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found |
| * @retval IX_ETH_DB_INVALID_VLAN <i>vlanTag</i> argument does not parse to a valid 802.1Q VLAN tag |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBVlanTagSet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag vlanTag); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag) |
| * |
| * @brief Retrieves the 802.1Q VLAN tag from a database record given the record MAC address |
| * |
| * @param macAddr MAC address |
| * @param vlanTag location to write the record 802.1Q VLAN tag to |
| * |
| * @note VLAN tags can be retrieved only from IX_ETH_DB_FILTERING_VLAN_RECORD type records |
| * |
| * This function is used together with ixEthDBVlanTagSet to provide MAC-based VLAN classification support. |
| * Please note that the bridging application must contain specific code to make use of this feature (see @ref ixEthDBVlanTagSet). |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>vlanTag</i> pointer |
| * @retval IX_ETH_DB_NO_SUCH_ADDR a filtering record with the specified MAC address was not found |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBVlanTagGet(IxEthDBMacAddr *macAddr, IxEthDBVlanTag *vlanTag); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID) |
| * |
| * @brief Adds a VLAN ID to a port's VLAN membership table |
| * |
| * Adding a VLAN ID to a port's VLAN membership table will cause frames tagged with the specified |
| * VLAN ID to be accepted by the frame filter, if Ingress VLAN membership filtering is enabled. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to add the VLAN ID membership to |
| * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be added to the port membership table |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| * |
| * @note A port's default VLAN ID is always in its own membership table, hence there |
| * is no need to explicitly add it using this function (although it is not an error |
| * to do so) |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanMembershipAdd(IxEthDBPortId portID, IxEthDBVlanId vlanID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) |
| * |
| * @brief Adds a VLAN ID range to a port's VLAN membership table |
| * |
| * All the VLAN IDs in the specified range will be added to the port VLAN |
| * membership table, including the range start and end VLAN IDs. Tagged frames with |
| * VLAN IDs in the specified range will be accepted by the frame filter, if Ingress VLAN |
| * membership filtering is enabled. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to add the VLAN membership range into |
| * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range |
| * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| * |
| * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case this |
| * function will behave as @ref ixEthDBPortVlanMembershipAdd |
| * |
| * @note A port's default VLAN ID is always in its own membership table, hence there is no need |
| * to explicitly add it using this function (although it is not an error to do so) |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanMembershipRangeAdd(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID) |
| * |
| * @brief Removes a VLAN ID from a port's VLAN membership table |
| * |
| * Frames tagged with a VLAN ID which is not in a port's VLAN membership table |
| * will be discarded by the frame filter, if Ingress membership filtering is enabled. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN ID membership from |
| * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be removed from the port membership table |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_INVALID_VLAN vlanID is not a valid VLAN ID |
| * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID |
| * from the port membership table (vlanID was set to the default port VLAN ID) |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| * |
| * @note A port's default VLAN ID cannot be removed from the port's membership |
| * table; attempting it will return IX_ETH_DB_NO_PERMISSION |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanMembershipRemove(IxEthDBPortId portID, IxEthDBVlanId vlanID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax) |
| * |
| * @brief Removes a VLAN ID range from a port's VLAN membership table |
| * |
| * All the VLAN IDs in the specified range will be removed from the port VLAN |
| * membership table, including the range start and end VLAN IDs. Tagged frames |
| * with VLAN IDs in the range will be discarded by the frame filter, if Ingress |
| * membership filtering is enabled. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to remove the VLAN membership range from |
| * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN ID range |
| * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN ID range |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_VLAN the specified VLAN IDs are invalid or do not constitute a range |
| * @retval IX_ETH_DB_NO_PERMISSION attempted to remove the default VLAN ID |
| * from the port membership table (both vlanIDMin and vlanIDMax were set to the default port VLAN ID) |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| * |
| * @note Is is valid to use the same VLAN ID for both vlanIDMin and vlanIDMax, in which case |
| * function will behave as @ref ixEthDBPortVlanMembershipRemove |
| * |
| * @note If the given range overlaps the default port VLAN ID this function |
| * will remove all the VLAN IDs in the range except for the port VLAN ID from its |
| * own membership table. This situation will be silently dealt with (no error message |
| * will be returned) as long as the range contains more than one value (i.e. at least |
| * one other value, apart from the default port VLAN ID). If the function is called |
| * with the vlanIDMin and vlanIDMax parameters both set to the port default VLAN ID, the |
| * function will infer that an attempt was specifically made to remove the default port |
| * VLAN ID from the port membership table, in which case the return value will be |
| * IX_ETH_DB_NO_PERMISSION. |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanMembershipRangeRemove(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) |
| * |
| * @brief Sets a port's VLAN membership table |
| * |
| * Sets a port's VLAN membership table from a complete VLAN table containing all the possible |
| * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit |
| * indicates whether the VLAN at that bit index is in the port's membership list (if set) or |
| * not (unset). |
| * |
| * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no |
| * other bit must be set if bit 0 is set. |
| * |
| * The bit at index 4095 is reserved and should never be set (it will be ignored if set). |
| * |
| * The bit referencing the same VLAN ID as the default port VLAN ID should always be set, as |
| * the membership list must contain at least the default port VLAN ID. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to set the VLAN membership table to |
| * @param vlanSet @ref IxEthDBVlanSet [in] - pointer to the VLAN membership table |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanMembershipSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) |
| * |
| * @brief Retrieves a port's VLAN membership table |
| * |
| * Retrieves the complete VLAN membership table from a port, containing all the possible |
| * 4096 VLAN IDs. The table format is an array containing 4096 bits (512 bytes), where each bit |
| * indicates whether the VLAN at that bit index is in the port's membership list (if set) or |
| * not (unset). |
| * |
| * The bit at index 0, indicating VLAN ID 0, indicates no VLAN membership and therefore no |
| * other bit will be set if bit 0 is set. |
| * |
| * The bit at index 4095 is reserved and will not be set (it will be ignored if set). |
| * |
| * The bit referencing the same VLAN ID as the default port VLAN ID will always be set, as |
| * the membership list must contain at least the default port VLAN ID. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the VLAN membership table from |
| * @param vlanSet @ref IxEthDBVlanSet [out] - pointer a location where the VLAN membership table will be |
| * written to |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPortVlanMembershipGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter) |
| * |
| * @brief Sets a port's acceptable frame type filter |
| * |
| * The acceptable frame type is one (or a combination) of the following values: |
| * - IX_ETH_DB_ACCEPT_ALL_FRAMES - accepts all the frames |
| * - IX_ETH_DB_UNTAGGED_FRAMES - accepts untagged frames |
| * - IX_ETH_DB_VLAN_TAGGED_FRAMES - accepts tagged frames |
| * - IX_ETH_DB_PRIORITY_TAGGED_FRAMES - accepts tagged frames with VLAN ID set to 0 (no VLAN membership) |
| * |
| * Except for using the exact values given above only the following combinations are valid: |
| * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES |
| * - IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_PRIORITY_TAGGED_FRAMES |
| * |
| * Please note that IX_ETH_DB_UNTAGGED_FRAMES | IX_ETH_DB_VLAN_TAGGED_FRAMES is equivalent |
| * to IX_ETH_DB_ACCEPT_ALL_FRAMES. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @note by default the acceptable frame type filter is set to IX_ETH_DB_ACCEPT_ALL_FRAMES |
| * |
| * @note setting the acceptable frame type to PRIORITY_TAGGED_FRAMES is internally |
| * accomplished by changing the frame filter to VLAN_TAGGED_FRAMES and setting the |
| * VLAN membership list to include only VLAN ID 0; the membership list will need |
| * to be restored manually to an appropriate value if the acceptable frame type |
| * filter is changed back to ACCEPT_ALL_FRAMES or VLAN_TAGGED_FRAMES; failure to do so |
| * will filter all VLAN traffic bar frames tagged with VLAN ID 0 |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to set the acceptable frame type filter to |
| * @param frameFilter @ref IxEthDBFrameFilter [in] - acceptable frame type filter |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid frame type filter |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBAcceptableFrameTypeSet(IxEthDBPortId portID, IxEthDBFrameFilter frameFilter); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter) |
| * |
| * @brief Retrieves a port's acceptable frame type filter |
| * |
| * For a description of the acceptable frame types see @ref ixEthDBAcceptableFrameTypeSet |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID to retrieve the acceptable frame type filter from |
| * @param frameFilter @ref IxEthDBFrameFilter [out] - location to store the acceptable frame type filter |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>frameFilter</i> pointer argument |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBAcceptableFrameTypeGet(IxEthDBPortId portID, IxEthDBFrameFilter *frameFilter); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) |
| * |
| * @brief Sets a port's priority mapping table |
| * |
| * The priority mapping table is an 8x2 table mapping a QoS (user) priority into an internal |
| * traffic class. There are 8 valid QoS priorities (0..7, 0 being the lowest) which can be |
| * mapped into one of the 4 available traffic classes (0..3, 0 being the lowest). |
| * If a custom priority mapping table is not specified using this function the following |
| * default priority table will be used (as per IEEE 802.1Q and IEEE 802.1D): |
| * |
| * <table border="1"> <caption> QoS traffic classes </caption> |
| * <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b> |
| * <tr> <td> 0 <td> 1 <td> Best effort, default class for unexpedited traffic |
| * <tr> <td> 1 <td> 0 <td> Background traffic |
| * <tr> <td> 2 <td> 0 <td> Spare bandwidth |
| * <tr> <td> 3 <td> 1 <td> Excellent effort |
| * <tr> <td> 4 <td> 2 <td> Controlled load |
| * <tr> <td> 5 <td> 2 <td> Video traffic |
| * <tr> <td> 6 <td> 3 <td> Voice traffic |
| * <tr> <td> 7 <td> 3 <td> Network control |
| * </table> |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - port ID of the port to set the priority mapping table to |
| * @param priorityTable @ref IxEthDBPriorityTable [in] - location of the user priority table |
| * |
| * @note The provided table will be copied into internal data structures in EthDB and |
| * can be deallocated by the called after this function has completed its execution, if |
| * so desired |
| * |
| * @warning The number of available traffic classes differs depending on the NPE images |
| * and queue configuration. Check IxEthDBQoS.h for up-to-date information on the availability of |
| * traffic classes. Note that specifiying a traffic class in the priority map which exceeds |
| * the system availability will produce an IX_ETH_DB_INVALID_PRIORITY return error code and no |
| * priority will be remapped. |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>priorityTable</i> pointer |
| * @retval IX_ETH_DB_INVALID_PRIORITY at least one priority value exceeds |
| * the current number of available traffic classes |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPriorityMappingTableSet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable) |
| * |
| * @brief Retrieves a port's priority mapping table |
| * |
| * The priority mapping table for the given port will be copied in the location |
| * specified by the caller using "priorityTable" |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID ID @ref IxEthDBPortId [in] - of the port to retrieve the priority mapping table from |
| * @param priorityTable @ref IxEthDBPriorityTable [out] - pointer to a user specified location where the table will be copied to |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid priorityTable pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPriorityMappingTableGet(IxEthDBPortId portID, IxEthDBPriorityTable priorityTable); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass) |
| * |
| * @brief Sets one QoS/user priority => traffic class mapping in a port's priority mapping table |
| * |
| * This function establishes a mapping between a user (QoS) priority and an internal traffic class. |
| * The mapping will be saved in the port's priority mapping table. Use this function when not all |
| * the QoS priorities need remapping (see also @ref ixEthDBPriorityMappingTableSet) |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to |
| * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest) |
| * @param trafficClass @ref IxEthDBPriority [in] - internal traffic class, between 0 and 3 (0 being the lowest) |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_PRIORITY <i>userPriority</i> out of range or |
| * <i>trafficClass</i> is beyond the number of currently available traffic classes |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPriorityMappingClassSet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority trafficClass); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass) |
| * |
| * @brief Retrieves one QoS/user priority => traffic class mapping in a port's priority mapping table |
| * |
| * This function retrieves the internal traffic class associated with a QoS (user) priority from a given |
| * port's priority mapping table. Use this function when not all the QoS priority mappings are |
| * required (see also @ref ixEthDBPriorityMappingTableGet) |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to set the mapping to |
| * @param userPriority @ref IxEthDBPriority [in] - user (QoS) priority, between 0 and 7 (0 being the lowest) |
| * @param trafficClass @ref IxEthDBPriority [out] - location to write the corresponding internal traffic class to |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_PRIORITY invalid userPriority value (out of range) |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>trafficClass</i> pointer argument |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBPriorityMappingClassGet(IxEthDBPortId portID, IxEthDBPriority userPriority, IxEthDBPriority *trafficClass); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled) |
| * |
| * @brief Enables or disables Egress VLAN tagging for a port and a given VLAN |
| * |
| * This function enables or disables Egress VLAN tagging for the given port and VLAN ID. |
| * If the VLAN tagging for a certain VLAN ID is enabled then all the frames to be |
| * transmitted on the given port tagged with the same VLAN ID will be transmitted in a tagged format. |
| * If tagging is not enabled for the given VLAN ID, the VLAN tag from the frames matching |
| * this VLAN ID will be removed (the frames will be untagged). |
| * |
| * VLAN ID 4095 is reserved and should never be used with this function. |
| * VLAN ID 0 has the special meaning of "No VLAN membership" and it is used in this |
| * context to allow the port to send priority-tagged frames or not. |
| * |
| * By default, no Egress VLAN tagging is enabled on any port. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on |
| * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID to be matched against outgoing frames |
| * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN, and |
| * FALSE to disable Egress VLAN tagging |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range) |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL enabled); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled) |
| * |
| * @brief Retrieves the Egress VLAN tagging enabling status for a port and VLAN ID |
| * |
| * @param portID [in] - ID of the port to extract the Egress VLAN ID tagging status from |
| * @param vlanID VLAN [in] - ID whose tagging status is to be extracted |
| * @param enabled [in] - user-specifed location where the status is copied to; following |
| * the successfull execution of this function the value will be TRUE if Egress VLAN |
| * tagging is enabled for the given port and VLAN ID, and FALSE otherwise |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @see ixEthDBEgressVlanEntryTaggingEnabledGet |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range) |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>enabled</i> argument pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBEgressVlanEntryTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanId vlanID, BOOL *enabled); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled) |
| * |
| * @brief Enables or disables Egress VLAN tagging for a port and given VLAN range |
| * |
| * This function is very similar to @ref ixEthDBEgressVlanEntryTaggingEnabledSet with the |
| * difference that it can manipulate the Egress tagging status on multiple VLAN IDs, |
| * defined by a contiguous range. Note that both limits in the range are explicitly |
| * included in the execution of this function. |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the VLAN ID Egress tagging on |
| * @param vlanIDMin @ref IxEthDBVlanId [in] - start of the VLAN range to be matched against outgoing frames |
| * @param vlanIDMax @ref IxEthDBVlanId [in] - end of the VLAN range to be matched against outgoing frames |
| * @param enabled BOOL [in] - TRUE to enable Egress VLAN tagging on the port and given VLAN range, |
| * and FALSE to disable Egress VLAN tagging |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_VLAN invalid VLAN ID (out of range), or do not constitute a range |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_ETH_DB_NO_PERMISSION attempted to explicitly remove the default port VLAN ID from the tagging table |
| * @retval IX_FAIL unknown OS or NPE communication error |
| * |
| * @note Specifically removing the default port VLAN ID from the Egress tagging table by setting both vlanIDMin and vlanIDMax |
| * to the VLAN ID portion of the PVID is not allowed by this function and will return IX_ETH_DB_NO_PERMISSION. |
| * However, this can be circumvented, should the user specifically desire this, by either using a |
| * larger range (vlanIDMin < vlanIDMax) or by using ixEthDBEgressVlanEntryTaggingEnabledSet. |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBEgressVlanRangeTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanId vlanIDMin, IxEthDBVlanId vlanIDMax, BOOL enabled); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) |
| * |
| * @brief Sets the complete Egress VLAN tagging table for a port |
| * |
| * This function is used to set the VLAN tagging/untagging per VLAN ID for a given port |
| * covering the entire VLAN ID range (0..4094). The <i>vlanSet</i> parameter is a 4096 |
| * bit array, each bit indicating the Egress behavior for the corresponding VLAN ID. |
| * If a bit is set then outgoing frames with the corresponding VLAN ID will be transmitted |
| * with the VLAN tag, otherwise the frame will be transmitted without the VLAN tag. |
| * |
| * Bit 0 has a special significance, indicating tagging or tag removal for priority-tagged |
| * frames. |
| * |
| * Bit 4095 is reserved and should never be set (it will be ignored if set). |
| * |
| * - Reentrant - no |
| * - ISR Callable - no |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is set |
| * @param vlanSet @ref IxEthDBVlanSet [in] - 4096 bit array controlling per-VLAN tagging and untagging |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| * |
| * @warning This function will automatically add the default port VLAN ID to the Egress tagging table |
| * every time it is called. The user should manually call ixEthDBEgressVlanEntryTaggingEnabledSet to |
| * prevent tagging on the default port VLAN ID if the default behavior is not intended. |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBEgressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet) |
| * |
| * @brief Retrieves the complete Egress VLAN tagging table from a port |
| * |
| * This function copies the 4096 bit table controlling the Egress VLAN tagging into a user specified |
| * area. Each bit in the array indicates whether tagging for the corresponding VLAN (the bit position |
| * in the array) is enabled (the bit is set) or not (the bit is unset). |
| * |
| * Bit 4095 is reserved and should not be set (it will be ignored if set). |
| * |
| * @see ixEthDBEgressVlanTaggingEnabledSet |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port whose Egress VLAN tagging behavior is retrieved |
| * @param vlanSet @ref IxEthDBVlanSet [out] - user location to copy the Egress tagging table into; should have |
| * room to store 4096 bits (512 bytes) |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>vlanSet</i> pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBEgressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBVlanSet vlanSet); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction) |
| * |
| * @brief Sets the Ingress VLAN tagging behavior for a port |
| * |
| * A port's Ingress tagging behavior is controlled by the taggingAction parameter, |
| * which can take one of the following values: |
| * |
| * - IX_ETH_DB_PASS_THROUGH - leaves the frame unchanged (does not add or remove the VLAN tag) |
| * - IX_ETH_DB_ADD_TAG - adds the VLAN tag if not present, using the default port VID |
| * - IX_ETH_DB_REMOVE_TAG - removes the VLAN tag if present |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set |
| * @param taggingAction @ref IxEthDBTaggingAction [in] - tagging behavior for the port |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> argument |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBIngressVlanTaggingEnabledSet(IxEthDBPortId portID, IxEthDBTaggingAction taggingAction); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction) |
| * |
| * @brief Retrieves the Ingress VLAN tagging behavior from a port (see @ref ixEthDBIngressVlanTaggingEnabledSet) |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port whose Ingress VLAN tagging behavior is set |
| * @param taggingAction @ref IxEthDBTaggingAction [out] - location where the tagging behavior for the port is written to |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>taggingAction</i> pointer argument |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBIngressVlanTaggingEnabledGet(IxEthDBPortId portID, IxEthDBTaggingAction *taggingAction); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable) |
| * |
| * @brief Enables or disables port ID extraction |
| * |
| * This feature can be used in the situation when a multi-port device (e.g. a switch) |
| * is connected to an IXP4xx port and the device can provide incoming frame port |
| * identification by tagging the TPID field in the Ethernet frame. Enabling |
| * port extraction will instruct the NPE to copy the TPID field from the frame and |
| * place it in the <i>ixp_ne_src_port</i> of the <i>ixp_buf</i> header. In addition, |
| * the NPE restores the TPID field to 0. |
| * |
| * If the frame is not tagged the NPE will fill the <i>ixp_ne_src_port</i> with the |
| * port ID of the MII interface the frame was received from. |
| * |
| * The TPID field is the least significant byte of the type/length field, which is |
| * normally set to 0x8100 for 802.1Q-tagged frames. |
| * |
| * This feature is disabled by default. |
| * |
| * @param portID ID of the port to configure port ID extraction on |
| * @param enable TRUE to enable port ID extraction and FALSE to disable it |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE VLAN/QoS feature is not available or not enabled for the port |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBVlanPortExtractionEnable(IxEthDBPortId portID, BOOL enable); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet) |
| * |
| * @brief Retrieves the feature capability set for a port |
| * |
| * This function retrieves the feature capability set for a port or the common capabilities shared between all |
| * the ports, writing the feature capability set in a user specified location. |
| * |
| * The feature capability set will consist of a set formed by OR-ing one or more of the following values: |
| * - IX_ETH_DB_LEARNING - Learning feature; enables EthDB to learn MAC address (filtering) records, including 802.1Q enabled records |
| * - IX_ETH_DB_FILTERING - Filtering feature; enables EthDB to communicate with the NPEs for downloading filtering information in the NPEs; depends on the learning feature |
| * - IX_ETH_DB_VLAN_QOS - VLAN/QoS feature; enables EthDB to configure NPEs to operate in VLAN/QoS aware modes |
| * - IX_ETH_DB_FIREWALL - Firewall feature; enables EthDB to configure NPEs to operate in firewall mode, using white/black address lists |
| * - IX_ETH_DB_SPANNING_TREE_PROTOCOL - Spanning tree protocol feature; enables EthDB to configure the NPEs as STP nodes |
| * - IX_ETH_DB_WIFI_HEADER_CONVERSION - WiFi 802.3 to 802.11 header conversion feature; enables EthDB to handle WiFi conversion data |
| * |
| * Note that EthDB provides only the LEARNING feature for non-NPE ports. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to retrieve the capability set for |
| * (use IX_ETH_DB_ALL_PORTS to retrieve the common capabilities shared between all the ports) |
| * @param featureSet @ref IxEthDBFeature [out] - location where the capability set will be written to |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>featureSet</i> pointer |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFeatureCapabilityGet(IxEthDBPortId portID, IxEthDBFeature *featureSet); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled) |
| * |
| * @brief Enables or disables one or more EthDB features |
| * |
| * Selects one or more features (see @ref ixEthDBFeatureCapabilityGet for a description of the supported |
| * features) to be enabled or disabled on the selected port (or all the ports). |
| * |
| * Note that some features are mutually incompatible: |
| * - IX_ETH_DB_FILTERING is incompatible with IX_ETH_DB_WIFI_HEADER_CONVERSION |
| * |
| * Also note that some features require other features to be enabled: |
| * - IX_ETH_DB_FILTERING requires IX_ETH_DB_LEARNING |
| * |
| * This function will either enable the entire selected feature set for the selected port (or all the ports), |
| * in which case it will return IX_ETH_DB_SUCCESS, or in case of error it will not enable any feature at all |
| * and return an appropriate error message. |
| * |
| * The following features are enabled by default (for ports with the respective capability), |
| * for compatibility reasons with previous versions of CSR: |
| * - IX_ETH_DB_LEARNING |
| * - IX_ETH_DB_FILTERING |
| * |
| * All other features are disabled by default and require manual enabling using ixEthDBFeatureEnable. |
| * |
| * <b>Default settings for VLAN, QoS, Firewall and WiFi header conversion features:</b> |
| * |
| * <i>VLAN</i> |
| * |
| * When the VLAN/QoS feature is enabled for a port for the first time the default VLAN behavior |
| * of the port is set to be as <b>permissive</b> (it will accept all the frames) and |
| * <b>non-interferential</b> (it will not change any frames) as possible: |
| * - the port VLAN ID (VID) is set to 0 |
| * - the Ingress acceptable frame filter is set to accept all frames |
| * - the VLAN port membership is set to the complete VLAN range (0 - 4094) |
| * - the Ingress tagging mode is set to pass-through (will not change frames) |
| * - the Egress tagging mode is to send tagged frames in the entire VLAN range (0 - 4094) |
| * |
| * Note that further disabling and re-enabling the VLAN feature for a given port will not reset the port VLAN behavior |
| * to the settings listed above. Any VLAN settings made by the user are kept. |
| * |
| * <i>QoS</i> |
| * |
| * The following default priority mapping table will be used (as per IEEE 802.1Q and IEEE 802.1D): |
| * |
| * <table border="1"> <caption> QoS traffic classes </caption> |
| * <tr> <td> <b> QoS priority <td> <b> Default traffic class <td> <b> Traffic type </b> |
| * <tr> <td> 0 <td> 1 <td> Best effort, default class for unexpedited traffic |
| * <tr> <td> 1 <td> 0 <td> Background traffic |
| * <tr> <td> 2 <td> 0 <td> Spare bandwidth |
| * <tr> <td> 3 <td> 1 <td> Excellent effort |
| * <tr> <td> 4 <td> 2 <td> Controlled load |
| * <tr> <td> 5 <td> 2 <td> Video traffic |
| * <tr> <td> 6 <td> 3 <td> Voice traffic |
| * <tr> <td> 7 <td> 3 <td> Network control |
| * </table> |
| * |
| * <i> Firewall </i> |
| * |
| * The port firewall is configured by default in <b>black-list mode</b>, and the firewall address table is empty. |
| * This means the firewall will not filter any frames until the feature is configured and the firewall table is |
| * downloaded to the NPE. |
| * |
| * <i> Spanning Tree </i> |
| * |
| * The port is set to <b>STP unblocked mode</b>, therefore it will accept all frames until re-configured. |
| * |
| * <i> WiFi header conversion </i> |
| * |
| * The WiFi header conversion database is empty, therefore no actual header conversion will take place until this |
| * feature is configured and the conversion table downloaded to the NPE. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port to enable or disable the features on (use IX_ETH_DB_ALL_PORTS for all the ports) |
| * @param feature @ref IxEthDBFeature [in] - feature or feature set to enable or disable |
| * @param enabled BOOL [in] - TRUE to enable the feature and FALSE to disable it |
| * |
| * @note Certain features, from a functional point of view, cannot be disabled as such at NPE level; |
| * when such features are set to <i>disabled</i> using the EthDB API they will be configured in such |
| * a way to determine a behavior equivalent to the feature being disabled. As well as this, disabled |
| * features cannot be configured or accessed via the EthDB API (except for getting their status). |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_NO_PERMISSION attempted to enable mutually exclusive features, |
| * or a feature that depends on another feature which is not present or enabled |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE at least one of the features selected is unavailable |
| * @retval IX_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFeatureEnable(IxEthDBPortId portID, IxEthDBFeature feature, BOOL enabled); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled) |
| * |
| * @brief Retrieves the availability and status of a feature set |
| * |
| * This function returns the availability and status for a feature set. |
| * Note that if more than one feature is selected (e.g. IX_ETH_DB_LEARNING | IX_ETH_DB_FILTERING) |
| * the "present" and "enabled" return values will be set to TRUE only if all the features in the |
| * feature set are present and enabled (not only some). |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param feature @ref IxEthDBFeature [in] - identifier of the feature to retrieve the status for |
| * @param present BOOL [out] - location where a boolean flag indicating whether this feature is present will be written to |
| * @param enabled BOOL [out] - location where a boolean flag indicating whether this feature is enabled will be written to |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG either <i>present</i> or <i>enabled</i> pointer argument is invalid |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFeatureStatusGet(IxEthDBPortId portID, IxEthDBFeature feature, BOOL *present, BOOL *enabled); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value) |
| * |
| * @brief Retrieves the value of a feature property |
| * |
| * The EthDB features usually contain feature-specific properties describing or |
| * controlling how the feature operates. While essential properties (e.g. the |
| * firewall operating mode) have their own API, secondary properties can be |
| * retrieved using this function. |
| * |
| * Properties can be read-only or read-write. ixEthDBFeaturePropertyGet operates with |
| * both types of features. |
| * |
| * Properties have types associated with them. A descriptor indicating the property |
| * type is returned in the <i>type</i> argument for convenience. |
| * |
| * The currently supported properties and their corresponding features are as follows: |
| * |
| * <table border="1"> <caption> Properties for IX_ETH_DB_VLAN_QOS </caption> |
| * <tr> <td> <b> Property identifier <td> <b> Property type <td> <b> Property value <td> <b> Read-Only </b> |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_COUNT_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> number of internal traffic classes <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_0_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 0 <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_1_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 1 <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_2_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 2 <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_3_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 3 <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_4_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 4 <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_5_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 5 <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_6_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 6 <td> Yes |
| * <tr> <td> IX_ETH_DB_QOS_TRAFFIC_CLASS_7_RX_QUEUE_PROPERTY <td> IX_ETH_DB_INTEGER_PROPERTY <td> queue assignment for traffic class 7 <td> Yes |
| * </table> |
| * |
| * @see ixEthDBFeaturePropertySet |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is retrieved |
| * @param property @ref IxEthDBProperty [in] - property identifier |
| * @param type @ref IxEthDBPropertyType [out] - location where the property type will be stored |
| * @param value void [out] - location where the property value will be stored |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>type</i> or <i>value</i> pointer arguments |
| * @retval IX_ETH_DB_FAIL incorrect property value or unknown error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFeaturePropertyGet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, IxEthDBPropertyType *type, void *value); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value) |
| * |
| * @brief Sets the value of a feature property |
| * |
| * Unlike @ref ixEthDBFeaturePropertyGet, this function operates only with read-write properties |
| * |
| * The currently supported properties and their corresponding features are as follows: |
| * |
| * - IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE (for IX_ETH_DB_VLAN_QOS): freezes the availability of traffic classes |
| * to the number of traffic classes currently in use |
| * |
| * Note that this function creates deep copies of the property values; once the function is invoked the client |
| * can free or reuse the memory area containing the original property value. |
| * |
| * Copy behavior for different property types is defined as follows: |
| * |
| * - IX_ETH_DB_INTEGER_PROPERTY - 4 bytes are copied from the source location |
| * - IX_ETH_DB_STRING_PROPERTY - the source string will be copied up to the NULL '\0' string terminator, maximum of 255 characters |
| * - IX_ETH_DB_MAC_ADDR_PROPERTY - 6 bytes are copied from the source location |
| * - IX_ETH_DB_BOOL_PROPERTY - 4 bytes are copied from the source location; the only allowed values are TRUE (1L) and false (0L) |
| * |
| * @see ixEthDBFeaturePropertySet |
| * |
| * @warning IX_ETH_DB_QOS_QUEUE_CONFIGURATION_COMPLETE is provided for EthAcc internal use; |
| * do not attempt to set this property directly |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param feature @ref IxEthDBFeature [in] - EthDB feature for which the property is set |
| * @param property @ref IxEthDBProperty [in] - property identifier |
| * @param value void [in] - location where the property value is to be copied from |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_INVALID_ARG invalid property identifier, <i>value</i> pointer, or invalid property value |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFeaturePropertySet(IxEthDBPortId portID, IxEthDBFeature feature, IxEthDBProperty property, void *value); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType) |
| * |
| * @brief Deletes a set of record types from the Ethernet Database |
| * |
| * This function deletes all the records of certain types (specified in the recordType filter) |
| * associated with a port. Additionally, the IX_ETH_DB_ALL_PORTS value can be used as port ID |
| * to indicate that the specified record types should be deleted for all the ports. |
| * |
| * The record type filter can be an ORed combination of the following types: |
| * |
| * <caption> Record types </caption> |
| * - IX_ETH_DB_FILTERING_RECORD <table><caption> Filtering record </caption> |
| * <tr><td> MAC address <td> static/dynamic type <td> age </tr> |
| * </table> |
| * |
| * - IX_ETH_DB_FILTERING_VLAN_RECORD <table><caption> VLAN-enabled filtering record </caption> |
| * <tr><td> MAC address <td> static/dynamic type <td> age <td> 802.1Q tag </tr> |
| * </table> |
| * |
| * - IX_ETH_DB_WIFI_RECORD <table><caption> WiFi header conversion record </caption> |
| * <tr><td> MAC address <td> optional gateway MAC address <td> </tr> |
| * </table> |
| * |
| * - IX_ETH_DB_FIREWALL_RECORD <table><caption> Firewall record </caption> |
| * <tr><td> MAC address </tr> |
| * </table> |
| * - IX_ETH_DB_ALL_RECORD_TYPES |
| * |
| * Any combination of the above types is valid e.g. |
| * |
| * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_FILTERING_VLAN_RECORD | IX_ETH_DB_FIREWALL_RECORD), |
| * |
| * although some might be redundant (it is not an error to do so) e.g. |
| * |
| * (IX_ETH_DB_FILTERING_RECORD | IX_ETH_DB_ALL_RECORD_TYPES) |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param recordType @ref IxEthDBRecordType [in] - record type filter |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>recordType</i> filter |
| * |
| * @note If the record type filter contains any unrecognized value (hence the |
| * IX_ETH_DB_INVALID_ARG error value is returned) no actual records will be deleted. |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBDatabaseClear(IxEthDBPortId portID, IxEthDBRecordType recordType); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Adds an "Access Point to Station" record to the database, for 802.3 => 802.11 frame |
| * header conversion |
| * |
| * Frame header conversion is controlled by the set of MAC addresses |
| * added using @ref ixEthDBWiFiStationEntryAdd and @ref ixEthDBWiFiAccessPointEntryAdd. |
| * Conversion arguments are added using @ref ixEthDBWiFiFrameControlSet, |
| * @ref ixEthDBWiFiDurationIDSet and @ref ixEthDBWiFiBBSIDSet. |
| * |
| * Note that adding the same MAC address twice will not return an error |
| * (but will not accomplish anything either), while re-adding a record previously added |
| * as an "Access Point to Access Point" will migrate the record to the "Access Point |
| * to Station" type. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_NOMEM maximum number of records reached |
| * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBWiFiStationEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr) |
| * |
| * @brief Adds an "Access Point to Access Point" record to the database |
| * |
| * @see ixEthDBWiFiStationEntryAdd |
| * |
| * Note that adding the same MAC address twice will simply overwrite the previously |
| * defined gateway MAC address value in the same record, if the record was previously of the |
| * "Access Point to Access Point" type. |
| * |
| * Re-adding a MAC address as "Access Point to Access Point", which was previously added as |
| * "Access Point to Station" will migrate the record type to "Access Point to Access Point" and |
| * record the gateway MAC address. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to add |
| * @param gatewayMacAddr @ref IxEthDBMacAddr [in] - MAC address of the gateway Access Point |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG macAddr is an invalid pointer |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>gatewayMacAddr</i> pointer argument |
| * @retval IX_ETH_DB_NOMEM maximum number of records reached |
| * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBWiFiAccessPointEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr, IxEthDBMacAddr *gatewayMacAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Removes a WiFi station record |
| * |
| * This function removes both types of WiFi records ("Access Point to Station" and |
| * "Access Point to Access Point"). |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to remove |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port is not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_NO_SUCH_ADDR specified address was not found in the database |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled |
| * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBWiFiEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID) |
| * |
| * @brief Downloads the MAC address table for 802.3 => 802.11 frame header |
| * conversion to the NPE |
| * |
| * Note that the frame conversion MAC address table must be individually downloaded |
| * to each NPE for which the frame header conversion feature is enabled (i.e. it |
| * is not possible to specify IX_ETH_DB_ALL_PORTS). |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBWiFiConversionTableDownload(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl) |
| * |
| * @brief Sets the GlobalFrameControl field |
| * |
| * The GlobalFrameControl field is a 2-byte value inserted in the <i>Frame Control</i> |
| * field for all 802.3 to 802.11 frame header conversions |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param frameControl UINT16 [in] - GlobalFrameControl value |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBWiFiFrameControlSet(IxEthDBPortId portID, UINT16 frameControl); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID) |
| * |
| * @brief Sets the GlobalDurationID field |
| * |
| * The GlobalDurationID field is a 2-byte value inserted in the <i>Duration/ID</i> |
| * field for all 802.3 to 802.11 frame header conversions |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param durationID UINT16 [in] - GlobalDurationID field |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBWiFiDurationIDSet(IxEthDBPortId portID, UINT16 durationID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid) |
| * |
| * @brief Sets the BBSID field |
| * |
| * The BBSID field is a 6-byte value which |
| * identifies the infrastructure of the service set managed |
| * by the Access Point having the IXP400 as its processor. The value |
| * is written in the <i>BBSID</i> field of the 802.11 frame header. |
| * The BBSID value is the MAC address of the Access Point. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param bbsid @ref IxEthDBMacAddr [in] - pointer to 6 bytes containing the BSSID |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>bbsid</i> pointer argument |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE WiFi feature not enabled |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBWiFiBBSIDSet(IxEthDBPortId portID, IxEthDBMacAddr *bbsid); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked) |
| * |
| * @brief Sets the STP blocked/unblocked state for a port |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param blocked BOOL [in] - TRUE to set the port as STP blocked, FALSE to set it as unblocked |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBSpanningTreeBlockingStateSet(IxEthDBPortId portID, BOOL blocked); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked) |
| * |
| * @brief Retrieves the STP blocked/unblocked state for a port |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param blocked BOOL * [in] - set to TRUE if the port is STP blocked, FALSE otherwise |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>blocked</i> pointer argument |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Spanning Tree Protocol feature not enabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBSpanningTreeBlockingStateGet(IxEthDBPortId portID, BOOL *blocked); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode) |
| * |
| * @brief Sets the firewall mode to use white or black listing |
| * |
| * When enabled, the NPE MAC address based firewall support operates in two modes: |
| * |
| * - white-list mode (MAC address based admission) |
| * - <i>mode</i> set to IX_ETH_DB_FIREWALL_WHITE_LIST |
| * - only packets originating from MAC addresses contained in the firewall address list |
| * are allowed on the Rx path |
| * - black-list mode (MAC address based blocking) |
| * - <i>mode</i> set to IX_ETH_DB_FIREWALL_BLACK_LIST |
| * - packets originating from MAC addresses contained in the firewall address list |
| * are discarded |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param mode @ref IxEthDBFirewallMode [in] - firewall mode (IX_ETH_DB_FIREWALL_WHITE_LIST or IX_ETH_DB_FIREWALL_BLACK_LIST) |
| * |
| * @note by default the firewall operates in black-list mode with an empty address |
| * list, hence it doesn't filter any packets |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled |
| * @retval IX_ETH_DB_INVALID_ARGUMENT <i>mode</i> argument is not a valid firewall configuration mode |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFirewallModeSet(IxEthDBPortId portID, IxEthDBFirewallMode mode); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable) |
| * |
| * @brief Enables or disables invalid MAC address filtering |
| * |
| * According to IEEE802 it is illegal for a source address to be a multicast |
| * or broadcast address. If this feature is enabled the NPE inspects the source |
| * MAC addresses of incoming frames and discards them if invalid addresses are |
| * detected. |
| * |
| * By default this service is enabled, if the firewall feature is supported by the |
| * NPE image. |
| * |
| * @param portID ID of the port |
| * @param enable TRUE to enable invalid MAC address filtering and FALSE to disable it |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFirewallInvalidAddressFilterEnable(IxEthDBPortId portID, BOOL enable); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Adds a MAC address to the firewall address list |
| * |
| * Note that adding the same MAC address twice will not return an error |
| * but will not actually accomplish anything. |
| * |
| * The firewall MAC address list has a limited number of entries; once |
| * the maximum number of entries has been reached this function will failed |
| * to add more addresses, returning IX_ETH_DB_NOMEM. |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be added |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_NOMEM maximum number of records reached |
| * @retval IX_ETH_DB_BUSY lock condition or transaction in progress, try again later |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFirewallEntryAdd(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr) |
| * |
| * @brief Removes a MAC address from the firewall address list |
| * |
| * @param portID @ref IxEthDBPortId [in] - ID of the port |
| * @param macAddr @ref IxEthDBMacAddr [in] - MAC address to be removed |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_NO_SUCH_ADDR address not found |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFirewallEntryRemove(IxEthDBPortId portID, IxEthDBMacAddr *macAddr); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID) |
| * |
| * @brief Downloads the MAC firewall table to a port |
| * |
| * @param portID ID of the port |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID is not a valid port identifier |
| * @retval IX_ETH_DB_PORT_UNINITIALIZED port not initialized |
| * @retval IX_ETH_DB_FEATURE_UNAVAILABLE Firewall feature not enabled |
| * @retval IX_ETH_DB_FAIL unknown OS or NPE communication error |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBFirewallTableDownload(IxEthDBPortId portID); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field) |
| * |
| * @brief Adds a user-defined field to a database record |
| * |
| * This function associates a user-defined field to a database record. |
| * The user-defined field is passed as a <i>(void *)</i> parameter, hence it can be used |
| * for any purpose (such as identifying a structure). Retrieving the user-defined field from |
| * a record is done using @ref ixEthDBUserFieldGet. Note that EthDB never uses the user-defined |
| * field for any internal operation and it is not aware of the significance of its contents. The |
| * field is only stored as a pointer. |
| * |
| * The database record is identified using a combination of the given parameters, depending on the record type. |
| * All the record types require the record MAC address. |
| * |
| * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address |
| * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID |
| * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID |
| * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID |
| * |
| * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking). |
| * The user-defined field can be cleared using a <b>NULL</b> <i>field</i> parameter. |
| * |
| * @param recordType @ref IxEthDBRecordType [in] - type of record (can be IX_ETH_DB_FILTERING_RECORD, |
| * IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD or IX_ETH_DB_FIREWALL_RECORD) |
| * @param portID @ref IxEthDBPortId [in] - ID of the port (required only for WIFI and FIREWALL records) |
| * @param macAddr @ref IxEthDBMacAddr * [in] - MAC address of the record |
| * @param vlanID @ref IxEthDBVlanId [in] - VLAN ID of the record (required only for FILTERING_VLAN records) |
| * @param field void * [in] - user defined field |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> pointer argument |
| * @retval IX_ETH_DB_NO_SUCH_ADDR record not found |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBUserFieldSet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void *field); |
| |
| /** |
| * @ingroup IxEthDB |
| * |
| * @fn IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portID, IxEthDBVlanId vlanID, void **field) |
| * |
| * @brief Retrieves a user-defined field from a database record |
| * |
| * The database record is identified using a combination of the given parameters, depending on the record type. |
| * All the record types require the record MAC address. |
| * |
| * - IX_ETH_DB_FILTERING_RECORD requires only the MAC address |
| * - IX_ETH_DB_VLAN_FILTERING_RECORD requires the MAC address and the VLAN ID |
| * - IX_ETH_DB_WIFI_RECORD requires the MAC address and the portID |
| * - IX_ETH_DB_FIREWALL_RECORD requires the MAC address and the portID |
| * |
| * Please note that if a parameter is not required it is completely ignored (it does not undergo parameter checking). |
| * |
| * If no user-defined field was registered with the specified record then <b>NULL</b> will be written |
| * at the location specified by <i>field</i>. |
| * |
| * @param recordType type of record (can be IX_ETH_DB_FILTERING_RECORD, IX_ETH_DB_FILTERING_VLAN_RECORD, IX_ETH_DB_WIFI_RECORD |
| * or IX_ETH_DB_FIREWALL_RECORD) |
| * @param portID ID of the port (required only for WIFI and FIREWALL records) |
| * @param macAddr MAC address of the record |
| * @param vlanID VLAN ID of the record (required only for FILTERING_VLAN records) |
| * @param field location to write the user defined field into |
| * |
| * @retval IX_ETH_DB_SUCCESS operation completed successfully |
| * @retval IX_ETH_DB_INVALID_PORT portID was required but it is not a valid port identifier |
| * @retval IX_ETH_DB_INVALID_ARG invalid <i>macAddr</i> or <i>field</i> pointer arguments |
| * @retval IX_ETH_DB_NO_SUCH_ADDR record not found |
| */ |
| IX_ETH_DB_PUBLIC |
| IxEthDBStatus ixEthDBUserFieldGet(IxEthDBRecordType recordType, IxEthDBMacAddr *macAddr, IxEthDBPortId portId, IxEthDBVlanId vlanID, void **field); |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* IxEthDB_H */ |