blob: 75e4e076178a9d4214f94ff3bedfe3230dd912dc [file] [log] [blame]
/*
* (C) Copyright 2007-2010 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include "../board/xilinx/microblaze-generic/xparameters.h"
/* MicroBlaze CPU */
#define CONFIG_MICROBLAZE 1
#define MICROBLAZE_V5 1
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
# define CONFIG_XILINX_UARTLITE
# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
# define CONFIG_SYS_NS16550 1
# define CONFIG_SYS_NS16550_SERIAL
# define CONFIG_SYS_NS16550_REG_SIZE -4
# define CONFIG_CONS_INDEX 1
# define CONFIG_SYS_NS16550_COM1 \
(XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
# define CONFIG_BAUDRATE 115200
/* The following table includes the supported baudrates */
# define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
# define CONSOLE_ARG "console=console=ttyS0,115200\0"
#else
# error Undefined uart
#endif
/* setting reset address */
/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
/* ethernet */
#ifdef XILINX_EMACLITE_BASEADDR
# define CONFIG_XILINX_EMACLITE 1
# define CONFIG_SYS_ENET
#elif XILINX_LLTEMAC_BASEADDR
# define CONFIG_XILINX_LL_TEMAC 1
# define CONFIG_SYS_ENET
#endif
#undef ET_DEBUG
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
# define CONFIG_SYS_GPIO_0 1
# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
# define CONFIG_SYS_INTC_0 1
# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
#ifdef XILINX_TIMER_BASEADDR
# if (XILINX_TIMER_IRQ != -1)
# define CONFIG_SYS_TIMER_0 1
# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
# define FREQUENCE XILINX_CLOCK_FREQ
# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
# endif
#elif XILINX_CLOCK_FREQ
# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
#else
# error BAD CLOCK FREQ
#endif
/* FSL */
/* #define CONFIG_SYS_FSL_2 */
/* #define FSL_INTR_2 1 */
/*
* memory layout - Example
* CONFIG_SYS_TEXT_BASE = 0x1200_0000;
* CONFIG_SYS_SRAM_BASE = 0x1000_0000;
* CONFIG_SYS_SRAM_SIZE = 0x0400_0000;
*
* CONFIG_SYS_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
* CONFIG_SYS_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
* CONFIG_SYS_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
*
* 0x1000_0000 CONFIG_SYS_SDRAM_BASE
* FREE
* 0x1200_0000 CONFIG_SYS_TEXT_BASE
* U-BOOT code
* 0x1202_0000
* FREE
*
* STACK
* 0x13F7_F000 CONFIG_SYS_MALLOC_BASE
* MALLOC_AREA 256kB Alloc
* 0x11FB_F000 CONFIG_SYS_MONITOR_BASE
* MONITOR_CODE 256kB Env
* 0x13FF_F000 CONFIG_SYS_GBL_DATA_OFFSET
* GLOBAL_DATA 4kB bd, gd
* 0x1400_0000 CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE
*/
/* ddr sdram - main memory */
#define CONFIG_SYS_SDRAM_BASE XILINX_RAM_START
#define CONFIG_SYS_SDRAM_SIZE XILINX_RAM_SIZE
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
/* global pointer */
/* start of global data */
#define CONFIG_SYS_GBL_DATA_OFFSET \
(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE \
- GENERATED_GBL_DATA_SIZE)
/* monitor code */
#define SIZE 0x40000
#define CONFIG_SYS_MONITOR_LEN (SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MONITOR_BASE \
(CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MONITOR_END \
(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MALLOC_LEN SIZE
#define CONFIG_SYS_MALLOC_BASE \
(CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
/* stack */
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
/*#define RAMENV */
#define FLASH
#ifdef FLASH
# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
# define CONFIG_SYS_FLASH_CFI 1
# define CONFIG_FLASH_CFI_DRIVER 1
/* ?empty sector */
# define CONFIG_SYS_FLASH_EMPTY_INFO 1
/* max number of memory banks */
# define CONFIG_SYS_MAX_FLASH_BANKS 1
/* max number of sectors on one chip */
# define CONFIG_SYS_MAX_FLASH_SECT 512
/* hardware flash protection */
# define CONFIG_SYS_FLASH_PROTECTION
# ifdef RAMENV
# define CONFIG_ENV_IS_NOWHERE 1
# define CONFIG_ENV_SIZE 0x1000
# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
# else /* !RAMENV */
# define CONFIG_ENV_IS_IN_FLASH 1
/* 128K(one sector) for env */
# define CONFIG_ENV_SECT_SIZE 0x20000
# define CONFIG_ENV_ADDR \
(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
# define CONFIG_ENV_SIZE 0x20000
# endif /* !RAMBOOT */
#else /* !FLASH */
/* ENV in RAM */
# define CONFIG_SYS_NO_FLASH 1
# define CONFIG_ENV_IS_NOWHERE 1
# define CONFIG_ENV_SIZE 0x1000
# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
/* hardware flash protection */
# define CONFIG_SYS_FLASH_PROTECTION
#endif /* !FLASH */
/* system ace */
#ifdef XILINX_SYSACE_BASEADDR
# define CONFIG_SYSTEMACE
/* #define DEBUG_SYSTEMACE */
# define SYSTEMACE_CONFIG_FPGA
# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
# define CONFIG_DOS_PARTITION
#endif
#if defined(XILINX_USE_ICACHE)
# define CONFIG_ICACHE
#else
# undef CONFIG_ICACHE
#endif
#if defined(XILINX_USE_DCACHE)
# define CONFIG_DCACHE
#else
# undef CONFIG_DCACHE
#endif
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MFSL
#define CONFIG_CMD_ECHO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
# define CONFIG_CMD_CACHE
#else
# undef CONFIG_CMD_CACHE
#endif
#ifndef CONFIG_SYS_ENET
# undef CONFIG_CMD_NET
# undef CONFIG_NET_MULTI
#else
# define CONFIG_CMD_PING
# define CONFIG_CMD_DHCP
# define CONFIG_NET_MULTI
#endif
#if defined(CONFIG_SYSTEMACE)
# define CONFIG_CMD_EXT2
# define CONFIG_CMD_FAT
#endif
#if defined(FLASH)
# define CONFIG_CMD_ECHO
# define CONFIG_CMD_FLASH
# define CONFIG_CMD_IMLS
# define CONFIG_CMD_JFFS2
# if !defined(RAMENV)
# define CONFIG_CMD_SAVEENV
# define CONFIG_CMD_SAVES
# endif
#else
# undef CONFIG_CMD_IMLS
# undef CONFIG_CMD_FLASH
# undef CONFIG_CMD_JFFS2
#endif
#if defined(CONFIG_CMD_JFFS2)
/* JFFS2 partitions */
#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=flash-0"
/* default mtd partition table */
#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\
"256k(env),3m(kernel),1m(romfs),"\
"1m(cramfs),-(jffs2)"
#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
/* size of console buffer */
#define CONFIG_SYS_CBSIZE 512
/* print buffer size */
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS 15
#define CONFIG_SYS_LONGHELP
/* default load address */
#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
#define CONFIG_HOSTNAME XILINX_BOARD_NAME
#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.5
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
/* architecture dependent code */
#define CONFIG_SYS_USR_EXCEP /* user exception */
#define CONFIG_SYS_HZ 1000
#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
"nor0=flash-0\0"\
"mtdparts=mtdparts=flash-0:"\
"256k(u-boot),256k(env),3m(kernel),"\
"1m(romfs),1m(cramfs),-(jffs2)\0"
#define CONFIG_CMDLINE_EDITING
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef CONFIG_SYS_HUSH_PARSER
# define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
#endif /* __CONFIG_H */