blob: e8e92920dcbca832136ad99c4284bcba17e15327 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
#ifndef __KONTRON_PITX_IMX8M_H
#define __KONTRON_PITX_IMX8M_H
#include <linux/sizes.h>
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
#define CONFIG_SPL_MAX_SIZE (124 * SZ_1K)
#define CONFIG_SYS_MONITOR_LEN (512 * SZ_1K)
/* GUID for capsule updatable firmware image */
#define KONTRON_PITX_IMX8M_FIT_IMAGE_GUID \
EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SPL_STACK 0x187FF0
#define CONFIG_SPL_BSS_START_ADDR 0x00180000
#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CONFIG_MALLOC_F_ADDR 0x182000
/* For RAW image gives a error info not panic */
#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
#endif
/* ENET1 Config */
#if defined(CONFIG_CMD_NET)
#define CONFIG_FEC_MXC_PHYADDR 0
#define FEC_QUIRK_ENET_MAC
#define PHY_ANEG_TIMEOUT 20000
#endif
#define ENV_MEM_LAYOUT_SETTINGS \
"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"kernel_addr_r=0x42000000\0" \
"fdt_addr_r=0x48000000\0" \
"fdtoverlay_addr_r=0x49000000\0" \
"ramdisk_addr_r=0x48080000\0" \
"scriptaddr=0x40000000\0" \
"pxefile_addr_r=0x40100000\0"
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(USB, usb, 0) \
func(DHCP, dhcp, na) \
func(PXE, pxe, 0)
#include <config_distro_bootcmd.h>
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
"console=ttymxc2,115200\0" \
"boot_fdt=try\0" \
"fdtfile=freescale/imx8mq-kontron-pitx-imx8m.dtb\0" \
"dfu_alt_info=mmc 0=flash-bin raw 0x42 0x1000 mmcpart 1\0"\
ENV_MEM_LAYOUT_SETTINGS \
BOOTENV
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0xC0000000 /* 3GB DDR */
#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#endif