blob: 3661769748f20532fec6e1719b3770a995828ad4 [file] [log] [blame]
/*
* (C) Copyright 2017 Rockchip Electronics Co., Ltd
* Author: Andy Yan <andy.yan@rock-chips.com>
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <clk-uclass.h>
#include <dm.h>
#include <dt-structs.h>
#include <errno.h>
#include <mapmem.h>
#include <syscon.h>
#include <bitfield.h>
#include <asm/arch/clock.h>
#include <asm/arch/cru_rk3368.h>
#include <asm/arch/hardware.h>
#include <asm/io.h>
#include <dm/lists.h>
#include <dt-bindings/clock/rk3368-cru.h>
DECLARE_GLOBAL_DATA_PTR;
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3368_clk_plat {
struct dtd_rockchip_rk3368_cru dtd;
};
#endif
struct pll_div {
u32 nr;
u32 nf;
u32 no;
};
#define OSC_HZ (24 * 1000 * 1000)
#define APLL_L_HZ (800 * 1000 * 1000)
#define APLL_B_HZ (816 * 1000 * 1000)
#define GPLL_HZ (576 * 1000 * 1000)
#define CPLL_HZ (400 * 1000 * 1000)
#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
#define PLL_DIVISORS(hz, _nr, _no) { \
.nr = _nr, .nf = (u32)((u64)hz * _nr * _no / OSC_HZ), .no = _no}; \
_Static_assert(((u64)hz * _nr * _no / OSC_HZ) * OSC_HZ /\
(_nr * _no) == hz, #hz "Hz cannot be hit with PLL " \
"divisors on line " __stringify(__LINE__));
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
static const struct pll_div apll_l_init_cfg = PLL_DIVISORS(APLL_L_HZ, 12, 2);
static const struct pll_div apll_b_init_cfg = PLL_DIVISORS(APLL_B_HZ, 1, 2);
#if !defined(CONFIG_TPL_BUILD)
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 1, 2);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 6);
#endif
#endif
static ulong rk3368_clk_get_rate(struct clk *clk);
/* Get pll rate by id */
static uint32_t rkclk_pll_get_rate(struct rk3368_cru *cru,
enum rk3368_pll_id pll_id)
{
uint32_t nr, no, nf;
uint32_t con;
struct rk3368_pll *pll = &cru->pll[pll_id];
con = readl(&pll->con3);
switch ((con & PLL_MODE_MASK) >> PLL_MODE_SHIFT) {
case PLL_MODE_SLOW:
return OSC_HZ;
case PLL_MODE_NORMAL:
con = readl(&pll->con0);
no = ((con & PLL_OD_MASK) >> PLL_OD_SHIFT) + 1;
nr = ((con & PLL_NR_MASK) >> PLL_NR_SHIFT) + 1;
con = readl(&pll->con1);
nf = ((con & PLL_NF_MASK) >> PLL_NF_SHIFT) + 1;
return (24 * nf / (nr * no)) * 1000000;
case PLL_MODE_DEEP_SLOW:
default:
return 32768;
}
}
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
static int rkclk_set_pll(struct rk3368_cru *cru, enum rk3368_pll_id pll_id,
const struct pll_div *div)
{
struct rk3368_pll *pll = &cru->pll[pll_id];
/* All PLLs have same VCO and output frequency range restrictions*/
uint vco_hz = OSC_HZ / 1000 * div->nf / div->nr * 1000;
uint output_hz = vco_hz / div->no;
debug("PLL at %p: nf=%d, nr=%d, no=%d, vco=%u Hz, output=%u Hz\n",
pll, div->nf, div->nr, div->no, vco_hz, output_hz);
/* enter slow mode and reset pll */
rk_clrsetreg(&pll->con3, PLL_MODE_MASK | PLL_RESET_MASK,
PLL_RESET << PLL_RESET_SHIFT);
rk_clrsetreg(&pll->con0, PLL_NR_MASK | PLL_OD_MASK,
((div->nr - 1) << PLL_NR_SHIFT) |
((div->no - 1) << PLL_OD_SHIFT));
writel((div->nf - 1) << PLL_NF_SHIFT, &pll->con1);
/*
* BWADJ should be set to NF / 2 to ensure the nominal bandwidth.
* Compare the RK3368 TRM, section "3.6.4 PLL Bandwidth Adjustment".
*/
clrsetbits_le32(&pll->con2, PLL_BWADJ_MASK, (div->nf >> 1) - 1);
udelay(10);
/* return from reset */
rk_clrreg(&pll->con3, PLL_RESET_MASK);
/* waiting for pll lock */
while (!(readl(&pll->con1) & PLL_LOCK_STA))
udelay(1);
rk_clrsetreg(&pll->con3, PLL_MODE_MASK,
PLL_MODE_NORMAL << PLL_MODE_SHIFT);
return 0;
}
#endif
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
static void rkclk_init(struct rk3368_cru *cru)
{
u32 apllb, aplll, dpll, cpll, gpll;
rkclk_set_pll(cru, APLLB, &apll_b_init_cfg);
rkclk_set_pll(cru, APLLL, &apll_l_init_cfg);
#if !defined(CONFIG_TPL_BUILD)
/*
* If we plan to return to the boot ROM, we can't increase the
* GPLL rate from the SPL stage.
*/
rkclk_set_pll(cru, GPLL, &gpll_init_cfg);
rkclk_set_pll(cru, CPLL, &cpll_init_cfg);
#endif
apllb = rkclk_pll_get_rate(cru, APLLB);
aplll = rkclk_pll_get_rate(cru, APLLL);
dpll = rkclk_pll_get_rate(cru, DPLL);
cpll = rkclk_pll_get_rate(cru, CPLL);
gpll = rkclk_pll_get_rate(cru, GPLL);
debug("%s apllb(%d) apll(%d) dpll(%d) cpll(%d) gpll(%d)\n",
__func__, apllb, aplll, dpll, cpll, gpll);
}
#endif
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
static ulong rk3368_mmc_get_clk(struct rk3368_cru *cru, uint clk_id)
{
u32 div, con, con_id, rate;
u32 pll_rate;
switch (clk_id) {
case HCLK_SDMMC:
con_id = 50;
break;
case HCLK_EMMC:
con_id = 51;
break;
case SCLK_SDIO0:
con_id = 48;
break;
default:
return -EINVAL;
}
con = readl(&cru->clksel_con[con_id]);
switch (con & MMC_PLL_SEL_MASK) {
case MMC_PLL_SEL_GPLL:
pll_rate = rkclk_pll_get_rate(cru, GPLL);
break;
case MMC_PLL_SEL_24M:
pll_rate = OSC_HZ;
break;
case MMC_PLL_SEL_CPLL:
pll_rate = rkclk_pll_get_rate(cru, CPLL);
break;
case MMC_PLL_SEL_USBPHY_480M:
default:
return -EINVAL;
}
div = (con & MMC_CLK_DIV_MASK) >> MMC_CLK_DIV_SHIFT;
rate = DIV_TO_RATE(pll_rate, div);
debug("%s: raw rate %d (post-divide by 2)\n", __func__, rate);
return rate >> 1;
}
static ulong rk3368_mmc_find_best_rate_and_parent(struct clk *clk,
ulong rate,
u32 *best_mux,
u32 *best_div)
{
int i;
ulong best_rate = 0;
const ulong MHz = 1000000;
const struct {
u32 mux;
ulong rate;
} parents[] = {
{ .mux = MMC_PLL_SEL_CPLL, .rate = CPLL_HZ },
{ .mux = MMC_PLL_SEL_GPLL, .rate = GPLL_HZ },
{ .mux = MMC_PLL_SEL_24M, .rate = 24 * MHz }
};
debug("%s: target rate %ld\n", __func__, rate);
for (i = 0; i < ARRAY_SIZE(parents); ++i) {
/*
* Find the largest rate no larger than the target-rate for
* the current parent.
*/
ulong parent_rate = parents[i].rate;
u32 div = DIV_ROUND_UP(parent_rate, rate);
u32 adj_div = div;
ulong new_rate = parent_rate / adj_div;
debug("%s: rate %ld, parent-mux %d, parent-rate %ld, div %d\n",
__func__, rate, parents[i].mux, parents[i].rate, div);
/* Skip, if not representable */
if ((div - 1) > MMC_CLK_DIV_MASK)
continue;
/* Skip, if we already have a better (or equal) solution */
if (new_rate <= best_rate)
continue;
/* This is our new best rate. */
best_rate = new_rate;
*best_mux = parents[i].mux;
*best_div = div - 1;
}
debug("%s: best_mux = %x, best_div = %d, best_rate = %ld\n",
__func__, *best_mux, *best_div, best_rate);
return best_rate;
}
static ulong rk3368_mmc_set_clk(struct clk *clk, ulong rate)
{
struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3368_cru *cru = priv->cru;
ulong clk_id = clk->id;
u32 con_id, mux = 0, div = 0;
/* Find the best parent and rate */
rk3368_mmc_find_best_rate_and_parent(clk, rate << 1, &mux, &div);
switch (clk_id) {
case HCLK_SDMMC:
con_id = 50;
break;
case HCLK_EMMC:
con_id = 51;
break;
case SCLK_SDIO0:
con_id = 48;
break;
default:
return -EINVAL;
}
rk_clrsetreg(&cru->clksel_con[con_id],
MMC_PLL_SEL_MASK | MMC_CLK_DIV_MASK,
mux | div);
return rk3368_mmc_get_clk(cru, clk_id);
}
#endif
#if IS_ENABLED(CONFIG_TPL_BUILD)
static ulong rk3368_ddr_set_clk(struct rk3368_cru *cru, ulong set_rate)
{
const struct pll_div *dpll_cfg = NULL;
const ulong MHz = 1000000;
/* Fout = ((Fin /NR) * NF )/ NO */
static const struct pll_div dpll_1200 = PLL_DIVISORS(1200 * MHz, 1, 1);
static const struct pll_div dpll_1332 = PLL_DIVISORS(1332 * MHz, 2, 1);
static const struct pll_div dpll_1600 = PLL_DIVISORS(1600 * MHz, 3, 2);
switch (set_rate) {
case 1200*MHz:
dpll_cfg = &dpll_1200;
break;
case 1332*MHz:
dpll_cfg = &dpll_1332;
break;
case 1600*MHz:
dpll_cfg = &dpll_1600;
break;
default:
pr_err("Unsupported SDRAM frequency!,%ld\n", set_rate);
}
rkclk_set_pll(cru, DPLL, dpll_cfg);
return set_rate;
}
#endif
#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
static ulong rk3368_gmac_set_clk(struct rk3368_cru *cru,
ulong clk_id, ulong set_rate)
{
/*
* This models the 'assigned-clock-parents = <&ext_gmac>' from
* the DTS and switches to the 'ext_gmac' clock parent.
*/
rk_setreg(&cru->clksel_con[43], GMAC_MUX_SEL_EXTCLK);
return set_rate;
}
#endif
/*
* RK3368 SPI clocks have a common divider-width (7 bits) and a single bit
* to select either CPLL or GPLL as the clock-parent. The location within
* the enclosing CLKSEL_CON (i.e. div_shift and sel_shift) are variable.
*/
struct spi_clkreg {
uint8_t reg; /* CLKSEL_CON[reg] register in CRU */
uint8_t div_shift;
uint8_t sel_shift;
};
/*
* The entries are numbered relative to their offset from SCLK_SPI0.
*/
static const struct spi_clkreg spi_clkregs[] = {
[0] = { .reg = 45, .div_shift = 0, .sel_shift = 7, },
[1] = { .reg = 45, .div_shift = 8, .sel_shift = 15, },
[2] = { .reg = 46, .div_shift = 8, .sel_shift = 15, },
};
static inline u32 extract_bits(u32 val, unsigned width, unsigned shift)
{
return (val >> shift) & ((1 << width) - 1);
}
static ulong rk3368_spi_get_clk(struct rk3368_cru *cru, ulong clk_id)
{
const struct spi_clkreg *spiclk = NULL;
u32 div, val;
switch (clk_id) {
case SCLK_SPI0 ... SCLK_SPI2:
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
break;
default:
pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
val = readl(&cru->clksel_con[spiclk->reg]);
div = extract_bits(val, 7, spiclk->div_shift);
debug("%s: div 0x%x\n", __func__, div);
return DIV_TO_RATE(GPLL_HZ, div);
}
static ulong rk3368_spi_set_clk(struct rk3368_cru *cru, ulong clk_id, uint hz)
{
const struct spi_clkreg *spiclk = NULL;
int src_clk_div;
src_clk_div = DIV_ROUND_UP(GPLL_HZ, hz);
assert(src_clk_div < 127);
switch (clk_id) {
case SCLK_SPI0 ... SCLK_SPI2:
spiclk = &spi_clkregs[clk_id - SCLK_SPI0];
break;
default:
pr_err("%s: SPI clk-id %ld not supported\n", __func__, clk_id);
return -EINVAL;
}
rk_clrsetreg(&cru->clksel_con[spiclk->reg],
((0x7f << spiclk->div_shift) |
(0x1 << spiclk->sel_shift)),
((src_clk_div << spiclk->div_shift) |
(1 << spiclk->sel_shift)));
return rk3368_spi_get_clk(cru, clk_id);
}
static ulong rk3368_saradc_get_clk(struct rk3368_cru *cru)
{
u32 div, val;
val = readl(&cru->clksel_con[25]);
div = bitfield_extract(val, CLK_SARADC_DIV_CON_SHIFT,
CLK_SARADC_DIV_CON_WIDTH);
return DIV_TO_RATE(OSC_HZ, div);
}
static ulong rk3368_saradc_set_clk(struct rk3368_cru *cru, uint hz)
{
int src_clk_div;
src_clk_div = DIV_ROUND_UP(OSC_HZ, hz) - 1;
assert(src_clk_div < 128);
rk_clrsetreg(&cru->clksel_con[25],
CLK_SARADC_DIV_CON_MASK,
src_clk_div << CLK_SARADC_DIV_CON_SHIFT);
return rk3368_saradc_get_clk(cru);
}
static ulong rk3368_clk_get_rate(struct clk *clk)
{
struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
ulong rate = 0;
debug("%s: id %ld\n", __func__, clk->id);
switch (clk->id) {
case PLL_CPLL:
rate = rkclk_pll_get_rate(priv->cru, CPLL);
break;
case PLL_GPLL:
rate = rkclk_pll_get_rate(priv->cru, GPLL);
break;
case SCLK_SPI0 ... SCLK_SPI2:
rate = rk3368_spi_get_clk(priv->cru, clk->id);
break;
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
case HCLK_SDMMC:
case HCLK_EMMC:
rate = rk3368_mmc_get_clk(priv->cru, clk->id);
break;
#endif
case SCLK_SARADC:
rate = rk3368_saradc_get_clk(priv->cru);
break;
default:
return -ENOENT;
}
return rate;
}
static ulong rk3368_clk_set_rate(struct clk *clk, ulong rate)
{
__maybe_unused struct rk3368_clk_priv *priv = dev_get_priv(clk->dev);
ulong ret = 0;
debug("%s id:%ld rate:%ld\n", __func__, clk->id, rate);
switch (clk->id) {
case SCLK_SPI0 ... SCLK_SPI2:
ret = rk3368_spi_set_clk(priv->cru, clk->id, rate);
break;
#if IS_ENABLED(CONFIG_TPL_BUILD)
case CLK_DDR:
ret = rk3368_ddr_set_clk(priv->cru, rate);
break;
#endif
#if !IS_ENABLED(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(MMC_SUPPORT)
case HCLK_SDMMC:
case HCLK_EMMC:
ret = rk3368_mmc_set_clk(clk, rate);
break;
#endif
#if CONFIG_IS_ENABLED(GMAC_ROCKCHIP)
case SCLK_MAC:
/* select the external clock */
ret = rk3368_gmac_set_clk(priv->cru, clk->id, rate);
break;
#endif
case SCLK_SARADC:
ret = rk3368_saradc_set_clk(priv->cru, rate);
break;
default:
return -ENOENT;
}
return ret;
}
static struct clk_ops rk3368_clk_ops = {
.get_rate = rk3368_clk_get_rate,
.set_rate = rk3368_clk_set_rate,
};
static int rk3368_clk_probe(struct udevice *dev)
{
struct rk3368_clk_priv __maybe_unused *priv = dev_get_priv(dev);
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3368_clk_plat *plat = dev_get_platdata(dev);
priv->cru = map_sysmem(plat->dtd.reg[0], plat->dtd.reg[1]);
#endif
#if IS_ENABLED(CONFIG_SPL_BUILD) || IS_ENABLED(CONFIG_TPL_BUILD)
rkclk_init(priv->cru);
#endif
return 0;
}
static int rk3368_clk_ofdata_to_platdata(struct udevice *dev)
{
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
struct rk3368_clk_priv *priv = dev_get_priv(dev);
priv->cru = dev_read_addr_ptr(dev);
#endif
return 0;
}
static int rk3368_clk_bind(struct udevice *dev)
{
int ret;
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(gd->dm_root, "rk3368_sysreset", "reset", &dev);
if (ret)
pr_err("bind RK3368 reset driver failed: ret=%d\n", ret);
return ret;
}
static const struct udevice_id rk3368_clk_ids[] = {
{ .compatible = "rockchip,rk3368-cru" },
{ }
};
U_BOOT_DRIVER(rockchip_rk3368_cru) = {
.name = "rockchip_rk3368_cru",
.id = UCLASS_CLK,
.of_match = rk3368_clk_ids,
.priv_auto_alloc_size = sizeof(struct rk3368_clk_priv),
#if CONFIG_IS_ENABLED(OF_PLATDATA)
.platdata_auto_alloc_size = sizeof(struct rk3368_clk_plat),
#endif
.ofdata_to_platdata = rk3368_clk_ofdata_to_platdata,
.ops = &rk3368_clk_ops,
.bind = rk3368_clk_bind,
.probe = rk3368_clk_probe,
};