include/configs/at91sam9m10g45ek.h - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include <asm/hardware.h>

 #define CONFIG_SYS_TEXT_BASE		0x73f00000

 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */

 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz crystal */

 #define CONFIG_AT91SAM9M10G45EK

 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_SKIP_LOWLEVEL_INIT

 /* general purpose I/O */
 #define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
 #define CONFIG_AT91_GPIO
 #define CONFIG_AT91_GPIO_PULLUP	1	/* keep pullups on peripheral pins */

 /* serial console */
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define	CONFIG_USART_ID			ATMEL_ID_SYS

 /* LCD */
 #define LCD_BPP				LCD_COLOR8
 #define CONFIG_LCD_LOGO
 #undef LCD_TEST_PATTERN
 #define CONFIG_LCD_INFO
 #define CONFIG_LCD_INFO_BELOW_LOGO
 #define CONFIG_SYS_WHITE_ON_BLACK
 #define CONFIG_ATMEL_LCD
 #define CONFIG_ATMEL_LCD_RGB565
 /* board specific(not enough SRAM) */
 #define CONFIG_AT91SAM9G45_LCD_BASE		0x73E00000

 /* LED */
 #define CONFIG_AT91_LED
 #define	CONFIG_RED_LED		AT91_PIN_PD31	/* this is the user1 led */
 #define	CONFIG_GREEN_LED	AT91_PIN_PD0	/* this is the user2 led */


 /*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_BOOTP_BOOTPATH
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME

 /*
  * Command line configuration.
  */

 #define CONFIG_CMD_NAND

 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_CS6
 #define CONFIG_SYS_SDRAM_SIZE		0x08000000

 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)

 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			ATMEL_BASE_CS3
 #define CONFIG_SYS_NAND_DBW_8
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PC14
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PC8

 #endif

 /* MMC */

 #ifdef CONFIG_CMD_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #endif

 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
 #define CONFIG_NET_RETRY_COUNT		20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_AT91_WANTS_COMMON_PHY

 /* USB */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ATMEL
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	2

 #define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */

 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		0x23e00000

 #ifdef CONFIG_SYS_USE_NANDFLASH
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0xc0000
 #define CONFIG_ENV_OFFSET_REDUND	0x100000
 #define CONFIG_ENV_SIZE			0x20000

 #define CONFIG_BOOTCOMMAND						\
 	"nand read 0x70000000 0x200000 0x300000;"			\
 	"bootm 0x70000000"
 #define CONFIG_BOOTARGS							\
 	"console=ttyS0,115200 earlyprintk "				\
 	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"		\
 	"256k(env),256k(env_redundant),256k(spare),"			\
 	"512k(dtb),6M(kernel)ro,-(rootfs) "				\
 	"root=/dev/mtdblock7 rw rootfstype=jffs2"
 #elif CONFIG_SYS_USE_MMC
 /* bootstrap + u-boot + env + linux in mmc */
 #define FAT_ENV_INTERFACE	"mmc"
 /*
  * We don't specify the part number, if device 0 has partition table, it means
  * the first partition; it no partition table, then take whole device as a
  * FAT file system.
  */
 #define FAT_ENV_DEVICE_AND_PART	"0"
 #define FAT_ENV_FILE		"uboot.env"
 #define CONFIG_ENV_IS_IN_FAT
 #define CONFIG_FAT_WRITE
 #define CONFIG_ENV_SIZE		0x4000

 #define CONFIG_BOOTARGS		"console=ttyS0,115200 " \
 				"mtdparts=atmel_nand:" \
 				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
 				"root=/dev/mmcblk0p2 rw rootwait"
 #define CONFIG_BOOTCOMMAND	"fatload mmc 0:1 0x71000000 dtb; " \
 				"fatload mmc 0:1 0x72000000 zImage; " \
 				"bootz 0x72000000 - 0x71000000"
 #endif

 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_AUTO_COMPLETE

 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)

 /* Defines for SPL */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x300000
 #define CONFIG_SPL_MAX_SIZE		0x010000
 #define CONFIG_SPL_STACK		0x310000

 #define CONFIG_SYS_MONITOR_LEN		0x80000

 #ifdef CONFIG_SYS_USE_MMC

 #define CONFIG_SPL_BSS_START_ADDR	0x70000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x00080000
 #define CONFIG_SYS_SPL_MALLOC_START	0x70080000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00080000

 #define CONFIG_SPL_LDSCRIPT		arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME		"u-boot.img"

 #elif CONFIG_SYS_USE_NANDFLASH
 #define CONFIG_SPL_NAND_DRIVERS
 #define CONFIG_SPL_NAND_BASE
 #define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SOFTECC
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x80000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE

 #define CONFIG_SYS_NAND_PAGE_SIZE	0x800
 #define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCSIZE		256
 #define CONFIG_SYS_NAND_ECCBYTES	3
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_ECCPOS		{ 40, 41, 42, 43, 44, 45, 46, 47, \
 					  48, 49, 50, 51, 52, 53, 54, 55, \
 					  56, 57, 58, 59, 60, 61, 62, 63, }
 #endif

 #define CONFIG_SPL_ATMEL_SIZE
 #define CONFIG_SYS_MASTER_CLOCK		132096000
 #define CONFIG_SYS_AT91_PLLA		0x20c73f03
 #define CONFIG_SYS_MCKR			0x1301
 #define CONFIG_SYS_MCKR_CSS		0x1302

 #endif
	/*
	* (C) Copyright 2007-2008
	* Stelian Pop <stelian@popies.net>
	* Lead Tech Design <www.leadtechdesign.com>
	*
	* Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include <asm/hardware.h>

	#define CONFIG_SYS_TEXT_BASE 0x73f00000

	#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */

	/* ARM asynchronous clock */
	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
	#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */

	#define CONFIG_AT91SAM9M10G45EK

	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_SKIP_LOWLEVEL_INIT

	/* general purpose I/O */
	#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
	#define CONFIG_AT91_GPIO
	#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */

	/* serial console */
	#define CONFIG_ATMEL_USART
	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
	#define CONFIG_USART_ID ATMEL_ID_SYS

	/* LCD */
	#define LCD_BPP LCD_COLOR8
	#define CONFIG_LCD_LOGO
	#undef LCD_TEST_PATTERN
	#define CONFIG_LCD_INFO
	#define CONFIG_LCD_INFO_BELOW_LOGO
	#define CONFIG_SYS_WHITE_ON_BLACK
	#define CONFIG_ATMEL_LCD
	#define CONFIG_ATMEL_LCD_RGB565
	/* board specific(not enough SRAM) */
	#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000

	/* LED */
	#define CONFIG_AT91_LED
	#define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */
	#define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */


	/*
	* BOOTP options
	*/
	#define CONFIG_BOOTP_BOOTFILESIZE
	#define CONFIG_BOOTP_BOOTPATH
	#define CONFIG_BOOTP_GATEWAY
	#define CONFIG_BOOTP_HOSTNAME

	/*
	* Command line configuration.
	*/

	#define CONFIG_CMD_NAND

	/* SDRAM */
	#define CONFIG_NR_DRAM_BANKS 1
	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
	#define CONFIG_SYS_SDRAM_SIZE 0x08000000

	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)

	/* NAND flash */
	#ifdef CONFIG_CMD_NAND
	#define CONFIG_NAND_ATMEL
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
	#define CONFIG_SYS_NAND_DBW_8
	/* our ALE is AD21 */
	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	/* our CLE is AD22 */
	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
	#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
	#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8

	#endif

	/* MMC */

	#ifdef CONFIG_CMD_MMC
	#define CONFIG_GENERIC_ATMEL_MCI
	#endif

	/* Ethernet */
	#define CONFIG_MACB
	#define CONFIG_RMII
	#define CONFIG_NET_RETRY_COUNT 20
	#define CONFIG_RESET_PHY_R
	#define CONFIG_AT91_WANTS_COMMON_PHY

	/* USB */
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_ATMEL
	#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2

	#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */

	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	#define CONFIG_SYS_MEMTEST_END 0x23e00000

	#ifdef CONFIG_SYS_USE_NANDFLASH
	/* bootstrap + u-boot + env in nandflash */
	#define CONFIG_ENV_IS_IN_NAND
	#define CONFIG_ENV_OFFSET 0xc0000
	#define CONFIG_ENV_OFFSET_REDUND 0x100000
	#define CONFIG_ENV_SIZE 0x20000

	#define CONFIG_BOOTCOMMAND \
	"nand read 0x70000000 0x200000 0x300000;" \
	"bootm 0x70000000"
	#define CONFIG_BOOTARGS \
	"console=ttyS0,115200 earlyprintk " \
	"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
	"256k(env),256k(env_redundant),256k(spare)," \
	"512k(dtb),6M(kernel)ro,-(rootfs) " \
	"root=/dev/mtdblock7 rw rootfstype=jffs2"
	#elif CONFIG_SYS_USE_MMC
	/* bootstrap + u-boot + env + linux in mmc */
	#define FAT_ENV_INTERFACE "mmc"
	/*
	* We don't specify the part number, if device 0 has partition table, it means
	* the first partition; it no partition table, then take whole device as a
	* FAT file system.
	*/
	#define FAT_ENV_DEVICE_AND_PART "0"
	#define FAT_ENV_FILE "uboot.env"
	#define CONFIG_ENV_IS_IN_FAT
	#define CONFIG_FAT_WRITE
	#define CONFIG_ENV_SIZE 0x4000

	#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
	"mtdparts=atmel_nand:" \
	"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
	"root=/dev/mmcblk0p2 rw rootwait"
	#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x71000000 dtb; " \
	"fatload mmc 0:1 0x72000000 zImage; " \
	"bootz 0x72000000 - 0x71000000"
	#endif

	#define CONFIG_SYS_CBSIZE 256
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_CMDLINE_EDITING
	#define CONFIG_AUTO_COMPLETE

	/*
	* Size of malloc() pool
	*/
	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)

	/* Defines for SPL */
	#define CONFIG_SPL_FRAMEWORK
	#define CONFIG_SPL_TEXT_BASE 0x300000
	#define CONFIG_SPL_MAX_SIZE 0x010000
	#define CONFIG_SPL_STACK 0x310000

	#define CONFIG_SYS_MONITOR_LEN 0x80000

	#ifdef CONFIG_SYS_USE_MMC

	#define CONFIG_SPL_BSS_START_ADDR 0x70000000
	#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000
	#define CONFIG_SYS_SPL_MALLOC_START 0x70080000
	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000

	#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
	#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
	#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"

	#elif CONFIG_SYS_USE_NANDFLASH
	#define CONFIG_SPL_NAND_DRIVERS
	#define CONFIG_SPL_NAND_BASE
	#define CONFIG_SPL_NAND_ECC
	#define CONFIG_SPL_NAND_SOFTECC
	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
	#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE

	#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
	#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	#define CONFIG_SYS_NAND_ECCSIZE 256
	#define CONFIG_SYS_NAND_ECCBYTES 3
	#define CONFIG_SYS_NAND_OOBSIZE 64
	#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \
	48, 49, 50, 51, 52, 53, 54, 55, \
	56, 57, 58, 59, 60, 61, 62, 63, }
	#endif

	#define CONFIG_SPL_ATMEL_SIZE
	#define CONFIG_SYS_MASTER_CLOCK 132096000
	#define CONFIG_SYS_AT91_PLLA 0x20c73f03
	#define CONFIG_SYS_MCKR 0x1301
	#define CONFIG_SYS_MCKR_CSS 0x1302

	#endif