blob: b50e99ab8da481eb80082123acb79d15f1053edf [file] [log] [blame]
/*
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ppc4xx.h>
#include <asm/processor.h>
#include <spd_sdram.h>
extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
int board_early_init_f(void)
{
register uint reg;
/*--------------------------------------------------------------------
* Setup the external bus controller/chip selects
*-------------------------------------------------------------------*/
mtdcr(ebccfga, xbcfg);
reg = mfdcr(ebccfgd);
mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */
mtebc(pb1ap, 0x00000000);
mtebc(pb1cr, 0x00000000);
mtebc(pb2ap, 0x04814500);
/*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
mtebc(pb3ap, 0x00000000);
mtebc(pb3cr, 0x00000000);
mtebc(pb4ap, 0x00000000);
mtebc(pb4cr, 0x00000000);
mtebc(pb5ap, 0x00000000);
mtebc(pb5cr, 0x00000000);
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic0er, 0x00000000); /* disable all */
mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr(uic0sr, 0xffffffff); /* clear all */
mtdcr(uic1sr, 0xffffffff); /* clear all */
mtdcr(uic1er, 0x00000000); /* disable all */
mtdcr(uic1cr, 0x00000000); /* all non-critical */
mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
mtdcr(uic1sr, 0xffffffff); /* clear all */
/*--------------------------------------------------------------------
* Setup the GPIO pins
*-------------------------------------------------------------------*/
/*CPLD cs */
/*setup Address lines for flash sizes larger than 16Meg. */
out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
/*setup emac */
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
/*UART1 */
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
/*setup USB 2.0 */
out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
/*--------------------------------------------------------------------
* Setup other serial configuration
*-------------------------------------------------------------------*/
mfsdr(sdr_pci0, reg);
mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
/*clear tmrclk divisor */
*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
/*enable ethernet */
*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
/*enable usb 1.1 fs device and remove usb 2.0 reset */
*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
/*get rid of flash write protect */
*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
return 0;
}
int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
uint pbcr;
int size_val = 0;
/* Re-do sizing to get full correct info */
mtdcr(ebccfga, pb0cr);
pbcr = mfdcr(ebccfgd);
switch (gd->bd->bi_flashsize) {
case 1 << 20:
size_val = 0;
break;
case 2 << 20:
size_val = 1;
break;
case 4 << 20:
size_val = 2;
break;
case 8 << 20:
size_val = 3;
break;
case 16 << 20:
size_val = 4;
break;
case 32 << 20:
size_val = 5;
break;
case 64 << 20:
size_val = 6;
break;
case 128 << 20:
size_val = 7;
break;
}
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
mtdcr(ebccfga, pb0cr);
mtdcr(ebccfgd, pbcr);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
-CFG_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
return 0;
}
int checkboard(void)
{
sys_info_t sysinfo;
get_sys_info(&sysinfo);
printf("Board: AMCC YOSEMITE\n");
printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
printf("\tPER: %lu MHz\n", sysinfo.freqEPB / 1000000);
printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
return (0);
}
/*************************************************************************
* sdram_init -- doesn't use serial presence detect.
*
* Assumes: 256 MB, ECC, non-registered
* PLB @ 133 MHz
*
************************************************************************/
void sdram_init(void)
{
register uint reg;
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
mtsdram(mem_clktr, 0x40000000); /* ?? */
mtsdram(mem_wddctr, 0x40000000); /* ?? */
/*clear this first, if the DDR is enabled by a debugger
then you can not make changes. */
mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
*------------------------------------------------------------------*/
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
mtsdram(mem_tr0, 0x410a4012); /* ?? */
mtsdram(mem_tr1, 0x8080080b); /* ?? */
mtsdram(mem_rtr, 0x04080000); /* ?? */
mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */
udelay(400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
mtsdram(mem_cfg0, 0x84000000); /* Enable */
for (;;) {
mfsdram(mem_mcsts, reg);
if (reg & 0x80000000)
break;
}
}
/*************************************************************************
* long int initdram
*
************************************************************************/
long int initdram(int board)
{
sdram_init();
return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
}
#if defined(CFG_DRAM_TEST)
int testdram(void)
{
unsigned long *mem = (unsigned long *)0;
const unsigned long kend = (1024 / sizeof(unsigned long));
unsigned long k, n;
mtmsr(0);
for (k = 0; k < CFG_KBYTES_SDRAM;
++k, mem += (1024 / sizeof(unsigned long))) {
if ((k & 1023) == 0) {
printf("%3d MB\r", k / 1024);
}
memset(mem, 0xaaaaaaaa, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0xaaaaaaaa) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
memset(mem, 0x55555555, 1024);
for (n = 0; n < kend; ++n) {
if (mem[n] != 0x55555555) {
printf("SDRAM test fails at: %08x\n",
(uint) & mem[n]);
return 1;
}
}
}
printf("SDRAM test passes\n");
return 0;
}
#endif
/*************************************************************************
* pci_pre_init
*
* This routine is called just prior to registering the hose and gives
* the board the opportunity to check things. Returning a value of zero
* indicates that things are bad & PCI initialization should be aborted.
*
* Different boards may wish to customize the pci controller structure
* (add regions, override default access routines, etc) or perform
* certain pre-initialization actions.
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
int pci_pre_init(struct pci_controller *hose)
{
unsigned long strap;
unsigned long addr;
/*--------------------------------------------------------------------------+
* Bamboo is always configured as the host & requires the
* PCI arbiter to be enabled.
*--------------------------------------------------------------------------*/
mfsdr(sdr_sdstp1, strap);
if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
printf("PCI: SDR0_STRP1[PAE] not set.\n");
printf("PCI: Configuration aborted.\n");
return 0;
}
/*-------------------------------------------------------------------------+
| Set priority for all PLB3 devices to 0.
| Set PLB3 arbiter to fair mode.
+-------------------------------------------------------------------------*/
mfsdr(sdr_amp1, addr);
mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb3_acr);
mtdcr(plb3_acr, addr | 0x80000000);
/*-------------------------------------------------------------------------+
| Set priority for all PLB4 devices to 0.
+-------------------------------------------------------------------------*/
mfsdr(sdr_amp0, addr);
mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
mtdcr(plb4_acr, addr);
/*-------------------------------------------------------------------------+
| Set Nebula PLB4 arbiter to fair mode.
+-------------------------------------------------------------------------*/
/* Segment0 */
addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
mtdcr(plb0_acr, addr);
/* Segment1 */
addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
mtdcr(plb1_acr, addr);
return 1;
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
/*************************************************************************
* pci_target_init
*
* The bootstrap configuration provides default settings for the pci
* inbound map (PIM). But the bootstrap config choices are limited and
* may not be sufficient for a given board.
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
void pci_target_init(struct pci_controller *hose)
{
/*--------------------------------------------------------------------------+
* Set up Direct MMIO registers
*--------------------------------------------------------------------------*/
/*--------------------------------------------------------------------------+
| PowerPC440 EP PCI Master configuration.
| Map one 1Gig range of PLB/processor addresses to PCI memory space.
| PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
| Use byte reversed out routines to handle endianess.
| Make this region non-prefetchable.
+--------------------------------------------------------------------------*/
out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
/*--------------------------------------------------------------------------+
* Set up Configuration registers
*--------------------------------------------------------------------------*/
/* Program the board's subsystem id/vendor id */
pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
CFG_PCI_SUBSYS_VENDORID);
pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
/* Configure command register as bus master */
pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
/* 240nS PCI clock */
pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
/* No error reporting */
pci_write_config_word(0, PCI_ERREN, 0);
pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
/*************************************************************************
* pci_master_init
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
void pci_master_init(struct pci_controller *hose)
{
unsigned short temp_short;
/*--------------------------------------------------------------------------+
| Write the PowerPC440 EP PCI Configuration regs.
| Enable PowerPC440 EP to be a master on the PCI bus (PMM).
| Enable PowerPC440 EP to act as a PCI memory target (PTM).
+--------------------------------------------------------------------------*/
pci_read_config_word(0, PCI_COMMAND, &temp_short);
pci_write_config_word(0, PCI_COMMAND,
temp_short | PCI_COMMAND_MASTER |
PCI_COMMAND_MEMORY);
}
#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
/*************************************************************************
* is_pci_host
*
* This routine is called to determine if a pci scan should be
* performed. With various hardware environments (especially cPCI and
* PPMC) it's insufficient to depend on the state of the arbiter enable
* bit in the strap register, or generic host/adapter assumptions.
*
* Rather than hard-code a bad assumption in the general 440 code, the
* 440 pci code requires the board to decide at runtime.
*
* Return 0 for adapter mode, non-zero for host (monarch) mode.
*
*
************************************************************************/
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
/* Bamboo is always configured as host. */
return (1);
}
#endif /* defined(CONFIG_PCI) */
/*************************************************************************
* hw_watchdog_reset
*
* This routine is called to reset (keep alive) the watchdog timer
*
************************************************************************/
#if defined(CONFIG_HW_WATCHDOG)
void hw_watchdog_reset(void)
{
}
#endif