blob: c7ebad17d1751a831915ad88fb736229bc4164ae [file] [log] [blame]
/*
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Boot support
*/
#include <common.h>
#include <command.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
__maybe_unused
static void print_num(const char *name, ulong value)
{
printf("%-12s= 0x%08lX\n", name, value);
}
__maybe_unused
static void print_eth(int idx)
{
char name[10], *val;
if (idx)
sprintf(name, "eth%iaddr", idx);
else
strcpy(name, "ethaddr");
val = env_get(name);
if (!val)
val = "(not set)";
printf("%-12s= %s\n", name, val);
}
#ifndef CONFIG_DM_ETH
__maybe_unused
static void print_eths(void)
{
struct eth_device *dev;
int i = 0;
do {
dev = eth_get_dev_by_index(i);
if (dev) {
printf("eth%dname = %s\n", i, dev->name);
print_eth(i);
i++;
}
} while (dev);
printf("current eth = %s\n", eth_get_name());
printf("ip_addr = %s\n", env_get("ipaddr"));
}
#endif
__maybe_unused
static void print_lnum(const char *name, unsigned long long value)
{
printf("%-12s= 0x%.8llX\n", name, value);
}
__maybe_unused
static void print_mhz(const char *name, unsigned long hz)
{
char buf[32];
printf("%-12s= %6s MHz\n", name, strmhz(buf, hz));
}
static inline void print_bi_boot_params(const bd_t *bd)
{
print_num("boot_params", (ulong)bd->bi_boot_params);
}
static inline void print_bi_mem(const bd_t *bd)
{
#if defined(CONFIG_SH)
print_num("mem start ", (ulong)bd->bi_memstart);
print_lnum("mem size ", (u64)bd->bi_memsize);
#elif defined(CONFIG_ARC)
print_num("mem start", (ulong)bd->bi_memstart);
print_lnum("mem size", (u64)bd->bi_memsize);
#else
print_num("memstart", (ulong)bd->bi_memstart);
print_lnum("memsize", (u64)bd->bi_memsize);
#endif
}
static inline void print_bi_dram(const bd_t *bd)
{
#ifdef CONFIG_NR_DRAM_BANKS
int i;
for (i = 0; i < CONFIG_NR_DRAM_BANKS; ++i) {
if (bd->bi_dram[i].size) {
print_num("DRAM bank", i);
print_num("-> start", bd->bi_dram[i].start);
print_num("-> size", bd->bi_dram[i].size);
}
}
#endif
}
static inline void print_bi_flash(const bd_t *bd)
{
#if defined(CONFIG_MICROBLAZE) || defined(CONFIG_SH)
print_num("flash start ", (ulong)bd->bi_flashstart);
print_num("flash size ", (ulong)bd->bi_flashsize);
print_num("flash offset ", (ulong)bd->bi_flashoffset);
#elif defined(CONFIG_NIOS2)
print_num("flash start", (ulong)bd->bi_flashstart);
print_num("flash size", (ulong)bd->bi_flashsize);
print_num("flash offset", (ulong)bd->bi_flashoffset);
#else
print_num("flashstart", (ulong)bd->bi_flashstart);
print_num("flashsize", (ulong)bd->bi_flashsize);
print_num("flashoffset", (ulong)bd->bi_flashoffset);
#endif
}
static inline void print_eth_ip_addr(void)
{
#if defined(CONFIG_CMD_NET)
print_eth(0);
#if defined(CONFIG_HAS_ETH1)
print_eth(1);
#endif
#if defined(CONFIG_HAS_ETH2)
print_eth(2);
#endif
#if defined(CONFIG_HAS_ETH3)
print_eth(3);
#endif
#if defined(CONFIG_HAS_ETH4)
print_eth(4);
#endif
#if defined(CONFIG_HAS_ETH5)
print_eth(5);
#endif
printf("IP addr = %s\n", env_get("ipaddr"));
#endif
}
static inline void print_baudrate(void)
{
#if defined(CONFIG_PPC)
printf("baudrate = %6u bps\n", gd->baudrate);
#else
printf("baudrate = %u bps\n", gd->baudrate);
#endif
}
static inline void __maybe_unused print_std_bdinfo(const bd_t *bd)
{
print_bi_boot_params(bd);
print_bi_mem(bd);
print_bi_flash(bd);
print_eth_ip_addr();
print_baudrate();
}
#if defined(CONFIG_PPC)
void __weak board_detail(void)
{
/* Please define board_detail() for your platform */
}
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
#ifdef DEBUG
print_num("bd address", (ulong)bd);
#endif
print_bi_mem(bd);
print_bi_flash(bd);
print_num("sramstart", bd->bi_sramstart);
print_num("sramsize", bd->bi_sramsize);
#if defined(CONFIG_8xx) || defined(CONFIG_E500)
print_num("immr_base", bd->bi_immr_base);
#endif
print_num("bootflags", bd->bi_bootflags);
#if defined(CONFIG_CPM2)
print_mhz("vco", bd->bi_vco);
print_mhz("sccfreq", bd->bi_sccfreq);
print_mhz("brgfreq", bd->bi_brgfreq);
#endif
print_mhz("intfreq", bd->bi_intfreq);
#if defined(CONFIG_CPM2)
print_mhz("cpmfreq", bd->bi_cpmfreq);
#endif
print_mhz("busfreq", bd->bi_busfreq);
#ifdef CONFIG_ENABLE_36BIT_PHYS
#ifdef CONFIG_PHYS_64BIT
puts("addressing = 36-bit\n");
#else
puts("addressing = 32-bit\n");
#endif
#endif
print_eth_ip_addr();
print_baudrate();
print_num("relocaddr", gd->relocaddr);
board_detail();
return 0;
}
#elif defined(CONFIG_NIOS2)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_bi_dram(bd);
print_bi_flash(bd);
#if defined(CONFIG_SYS_SRAM_BASE)
print_num ("sram start", (ulong)bd->bi_sramstart);
print_num ("sram size", (ulong)bd->bi_sramsize);
#endif
print_eth_ip_addr();
print_baudrate();
return 0;
}
#elif defined(CONFIG_MICROBLAZE)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_bi_dram(bd);
print_bi_flash(bd);
#if defined(CONFIG_SYS_SRAM_BASE)
print_num("sram start ", (ulong)bd->bi_sramstart);
print_num("sram size ", (ulong)bd->bi_sramsize);
#endif
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
print_eths();
#endif
print_baudrate();
print_num("relocaddr", gd->relocaddr);
print_num("reloc off", gd->reloc_off);
print_num("fdt_blob", (ulong)gd->fdt_blob);
print_num("new_fdt", (ulong)gd->new_fdt);
print_num("fdt_size", (ulong)gd->fdt_size);
return 0;
}
#elif defined(CONFIG_M68K)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_bi_mem(bd);
print_bi_flash(bd);
#if defined(CONFIG_SYS_INIT_RAM_ADDR)
print_num("sramstart", (ulong)bd->bi_sramstart);
print_num("sramsize", (ulong)bd->bi_sramsize);
#endif
#if defined(CONFIG_SYS_MBAR)
print_num("mbar", bd->bi_mbar_base);
#endif
print_mhz("cpufreq", bd->bi_intfreq);
print_mhz("busfreq", bd->bi_busfreq);
#ifdef CONFIG_PCI
print_mhz("pcifreq", bd->bi_pcifreq);
#endif
#ifdef CONFIG_EXTRA_CLOCK
print_mhz("flbfreq", bd->bi_flbfreq);
print_mhz("inpfreq", bd->bi_inpfreq);
print_mhz("vcofreq", bd->bi_vcofreq);
#endif
print_eth_ip_addr();
print_baudrate();
return 0;
}
#elif defined(CONFIG_MIPS)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
print_std_bdinfo(gd->bd);
print_num("relocaddr", gd->relocaddr);
print_num("reloc off", gd->reloc_off);
return 0;
}
#elif defined(CONFIG_ARM)
static int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
bd_t *bd = gd->bd;
print_num("arch_number", bd->bi_arch_number);
print_bi_boot_params(bd);
print_bi_dram(bd);
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) {
print_num("Secure ram",
gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK);
}
#endif
#ifdef CONFIG_RESV_RAM
if (gd->arch.resv_ram)
print_num("Reserved ram", gd->arch.resv_ram);
#endif
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_DM_ETH)
print_eths();
#endif
print_baudrate();
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
print_num("TLB addr", gd->arch.tlb_addr);
#endif
print_num("relocaddr", gd->relocaddr);
print_num("reloc off", gd->reloc_off);
print_num("irq_sp", gd->irq_sp); /* irq stack pointer */
print_num("sp start ", gd->start_addr_sp);
#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
print_num("FB base ", gd->fb_base);
#endif
/*
* TODO: Currently only support for davinci SOC's is added.
* Remove this check once all the board implement this.
*/
#ifdef CONFIG_CLOCKS
printf("ARM frequency = %ld MHz\n", gd->bd->bi_arm_freq);
printf("DSP frequency = %ld MHz\n", gd->bd->bi_dsp_freq);
printf("DDR frequency = %ld MHz\n", gd->bd->bi_ddr_freq);
#endif
#ifdef CONFIG_BOARD_TYPES
printf("Board Type = %ld\n", gd->board_type);
#endif
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr,
CONFIG_VAL(SYS_MALLOC_F_LEN));
#endif
if (gd->fdt_blob)
printf("fdt_blob = %p\n", gd->fdt_blob);
return 0;
}
#elif defined(CONFIG_SH)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_bi_mem(bd);
print_bi_flash(bd);
print_eth_ip_addr();
print_baudrate();
return 0;
}
#elif defined(CONFIG_X86)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_bi_boot_params(bd);
print_bi_dram(bd);
#if defined(CONFIG_CMD_NET)
print_eth_ip_addr();
print_mhz("ethspeed", bd->bi_ethspeed);
#endif
print_baudrate();
return 0;
}
#elif defined(CONFIG_SANDBOX)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_bi_boot_params(bd);
print_bi_dram(bd);
print_eth_ip_addr();
#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO)
print_num("FB base ", gd->fb_base);
#endif
return 0;
}
#elif defined(CONFIG_NDS32)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_num("arch_number", bd->bi_arch_number);
print_bi_boot_params(bd);
print_bi_dram(bd);
print_eth_ip_addr();
print_baudrate();
return 0;
}
#elif defined(CONFIG_RISCV)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_num("arch_number", bd->bi_arch_number);
print_bi_boot_params(bd);
print_bi_dram(bd);
print_eth_ip_addr();
print_baudrate();
return 0;
}
#elif defined(CONFIG_ARC)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bd_t *bd = gd->bd;
print_bi_mem(bd);
print_eth_ip_addr();
print_baudrate();
return 0;
}
#elif defined(CONFIG_XTENSA)
int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
print_std_bdinfo(gd->bd);
return 0;
}
#else
#error "a case for this architecture does not exist!"
#endif
/* -------------------------------------------------------------------- */
U_BOOT_CMD(
bdinfo, 1, 1, do_bdinfo,
"print Board Info structure",
""
);