Building U-Boot | |
--------------- | |
The ATUM8548 code is known to build using ELDK 4.1. | |
$ make ATUM8548_config | |
Configuring for ATUM8548 board... | |
$ make | |
Using Flash | |
----------- | |
The ATUM8548 board has one flash bank, of 128MB in size (2^23 = 0x08000000). | |
The BDI2000 commands for copying u-boot into flash are | |
as follows: | |
erase 0xFFF80000 0x4000 0x20 | |
prog 0xfff80000 uboot.bin bin | |
Booting Linux | |
------------- | |
U-boot/kermit commands for booting linux via NFS - assumming the proper | |
bootargs are set - are as follows: | |
tftp 1000000 uImage.atum | |
tftp c00000 mpc8548atum.dtb | |
bootm 1000000 - c00000 |