| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2020 Marvell International Ltd. |
| * |
| */ |
| |
| /* |
| * Device Tree file for Marvell Armada AP806/AP807. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| /dts-v1/; |
| |
| / { |
| compatible = "marvell,armada-ap806"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| psci-area@4000000 { |
| reg = <0x0 0x4000000 0x0 0x200000>; |
| no-map; |
| }; |
| }; |
| |
| AP_NAME { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| config-space { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x0 0x0 0xf0000000 0x1000000>; |
| |
| gic: interrupt-controller@210000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| reg = <0x210000 0x10000>, |
| <0x220000 0x20000>, |
| <0x240000 0x20000>, |
| <0x260000 0x20000>; |
| |
| gic_v2m0: v2m@280000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x280000 0x1000>; |
| arm,msi-base-spi = <160>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m1: v2m@290000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x290000 0x1000>; |
| arm,msi-base-spi = <192>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m2: v2m@2a0000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x2a0000 0x1000>; |
| arm,msi-base-spi = <224>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m3: v2m@2b0000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x2b0000 0x1000>; |
| arm,msi-base-spi = <256>; |
| arm,msi-num-spis = <32>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; |
| }; |
| |
| odmi: odmi@300000 { |
| compatible = "marvell,odmi-controller"; |
| interrupt-controller; |
| msi-controller; |
| marvell,odmi-frames = <4>; |
| reg = <0x300000 0x4000>, |
| <0x304000 0x4000>, |
| <0x308000 0x4000>, |
| <0x30C000 0x4000>; |
| marvell,spi-base = <128>, <136>, <144>, <152>; |
| }; |
| |
| ap_pinctl: ap-pinctl@6F4000 { |
| compatible = "marvell,ap806-pinctrl"; |
| bank-name ="apn-806"; |
| reg = <0x6F4000 0x10>; |
| pin-count = <20>; |
| max-func = <3>; |
| |
| ap_i2c0_pins: i2c-pins-0 { |
| marvell,pins = < 4 5 >; |
| marvell,function = <3>; |
| }; |
| ap_emmc_pins: emmc-pins-0 { |
| marvell,pins = < 0 1 2 3 4 5 6 7 |
| 8 9 10 12 >; |
| marvell,function = <1>; |
| }; |
| }; |
| |
| ap_gpio0: gpio@6F5040 { |
| compatible = "marvell,orion-gpio"; |
| reg = <0x6F5040 0x40>; |
| ngpios = <20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| ap_spi0: spi@510600 { |
| compatible = "marvell,armada-380-spi"; |
| reg = <0x510600 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ap_syscon 3>; |
| status = "disabled"; |
| }; |
| |
| ap_i2c0: i2c@511000 { |
| compatible = "marvell,mv78230-i2c"; |
| reg = <0x511000 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| timeout-ms = <1000>; |
| clocks = <&ap_syscon 3>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@512000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x512000 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&ap_syscon 3>; |
| status = "disabled"; |
| clock-frequency = <200000000>; |
| }; |
| |
| uart1: serial@512100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x512100 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&ap_syscon 3>; |
| status = "disabled"; |
| |
| }; |
| |
| watchdog: watchdog@610000 { |
| compatible = "arm,sbsa-gwdt"; |
| reg = <0x610000 0x1000>, <0x600000 0x1000>; |
| }; |
| |
| ap_sdhci0: sdhci@6e0000 { |
| compatible = "marvell,armada-8k-sdhci"; |
| reg = <0x6e0000 0x300>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| dma-coherent; |
| status = "disabled"; |
| }; |
| |
| ap_syscon: system-controller@6f4000 { |
| compatible = "marvell,ap806-system-controller", |
| "syscon"; |
| #clock-cells = <1>; |
| clock-output-names = "ap-cpu-cluster-0", |
| "ap-cpu-cluster-1", |
| "ap-fixed", "ap-mss"; |
| reg = <0x6f4000 0x1000>; |
| }; |
| }; |
| }; |
| }; |