| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2008 Semihalf |
| * |
| * Written by: Piotr Ziecik <kosmo@semihalf.com> |
| */ |
| |
| #include <common.h> |
| #include <dma.h> |
| #include <flash.h> |
| #include <malloc.h> |
| |
| #include <linux/errno.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/concat.h> |
| #include <mtd/cfi_flash.h> |
| |
| static struct mtd_info cfi_mtd_info[CFI_MAX_FLASH_BANKS]; |
| static char cfi_mtd_names[CFI_MAX_FLASH_BANKS][16]; |
| #ifdef CONFIG_MTD_CONCAT |
| static char c_mtd_name[16]; |
| #endif |
| |
| static int cfi_mtd_erase(struct mtd_info *mtd, struct erase_info *instr) |
| { |
| flash_info_t *fi = mtd->priv; |
| size_t a_start = fi->start[0] + instr->addr; |
| size_t a_end = a_start + instr->len; |
| int s_first = -1; |
| int s_last = -1; |
| int error, sect; |
| |
| for (sect = 0; sect < fi->sector_count; sect++) { |
| if (a_start == fi->start[sect]) |
| s_first = sect; |
| |
| if (sect < fi->sector_count - 1) { |
| if (a_end == fi->start[sect + 1]) { |
| s_last = sect; |
| break; |
| } |
| } else { |
| s_last = sect; |
| break; |
| } |
| } |
| |
| if (s_first >= 0 && s_first <= s_last) { |
| instr->state = MTD_ERASING; |
| |
| flash_set_verbose(0); |
| error = flash_erase(fi, s_first, s_last); |
| flash_set_verbose(1); |
| |
| if (error) { |
| instr->state = MTD_ERASE_FAILED; |
| return -EIO; |
| } |
| |
| instr->state = MTD_ERASE_DONE; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int cfi_mtd_read(struct mtd_info *mtd, loff_t from, size_t len, |
| size_t *retlen, u_char *buf) |
| { |
| flash_info_t *fi = mtd->priv; |
| u_char *f = (u_char*)(fi->start[0]) + from; |
| |
| if (dma_memcpy(buf, f, len) < 0) |
| memcpy(buf, f, len); |
| *retlen = len; |
| |
| return 0; |
| } |
| |
| static int cfi_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, |
| size_t *retlen, const u_char *buf) |
| { |
| flash_info_t *fi = mtd->priv; |
| u_long t = fi->start[0] + to; |
| int error; |
| |
| flash_set_verbose(0); |
| error = write_buff(fi, (u_char*)buf, t, len); |
| flash_set_verbose(1); |
| |
| if (!error) { |
| *retlen = len; |
| return 0; |
| } |
| |
| return -EIO; |
| } |
| |
| static void cfi_mtd_sync(struct mtd_info *mtd) |
| { |
| /* |
| * This function should wait until all pending operations |
| * finish. However this driver is fully synchronous, so |
| * this function returns immediately |
| */ |
| } |
| |
| static int cfi_mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) |
| { |
| flash_info_t *fi = mtd->priv; |
| |
| flash_set_verbose(0); |
| flash_protect(FLAG_PROTECT_SET, fi->start[0] + ofs, |
| fi->start[0] + ofs + len - 1, fi); |
| flash_set_verbose(1); |
| |
| return 0; |
| } |
| |
| static int cfi_mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) |
| { |
| flash_info_t *fi = mtd->priv; |
| |
| flash_set_verbose(0); |
| flash_protect(FLAG_PROTECT_CLEAR, fi->start[0] + ofs, |
| fi->start[0] + ofs + len - 1, fi); |
| flash_set_verbose(1); |
| |
| return 0; |
| } |
| |
| static int cfi_mtd_set_erasesize(struct mtd_info *mtd, flash_info_t *fi) |
| { |
| int sect_size = 0; |
| int sect_size_old = 0; |
| int sect; |
| int regions = 0; |
| int numblocks = 0; |
| ulong offset; |
| ulong base_addr; |
| |
| /* |
| * First detect the number of eraseregions so that we can allocate |
| * the array of eraseregions correctly |
| */ |
| for (sect = 0; sect < fi->sector_count; sect++) { |
| if (sect_size_old != flash_sector_size(fi, sect)) |
| regions++; |
| sect_size_old = flash_sector_size(fi, sect); |
| } |
| |
| switch (regions) { |
| case 0: |
| return 1; |
| case 1: /* flash has uniform erase size */ |
| mtd->numeraseregions = 0; |
| mtd->erasesize = sect_size_old; |
| return 0; |
| } |
| |
| mtd->numeraseregions = regions; |
| mtd->eraseregions = malloc(sizeof(struct mtd_erase_region_info) * regions); |
| |
| /* |
| * Now detect the largest sector and fill the eraseregions |
| */ |
| regions = 0; |
| base_addr = offset = fi->start[0]; |
| sect_size_old = flash_sector_size(fi, 0); |
| for (sect = 0; sect < fi->sector_count; sect++) { |
| if (sect_size_old != flash_sector_size(fi, sect)) { |
| mtd->eraseregions[regions].offset = offset - base_addr; |
| mtd->eraseregions[regions].erasesize = sect_size_old; |
| mtd->eraseregions[regions].numblocks = numblocks; |
| /* Now start counting the next eraseregions */ |
| numblocks = 0; |
| regions++; |
| offset = fi->start[sect]; |
| } |
| numblocks++; |
| |
| /* |
| * Select the largest sector size as erasesize (e.g. for UBI) |
| */ |
| if (flash_sector_size(fi, sect) > sect_size) |
| sect_size = flash_sector_size(fi, sect); |
| |
| sect_size_old = flash_sector_size(fi, sect); |
| } |
| |
| /* |
| * Set the last region |
| */ |
| mtd->eraseregions[regions].offset = offset - base_addr; |
| mtd->eraseregions[regions].erasesize = sect_size_old; |
| mtd->eraseregions[regions].numblocks = numblocks; |
| |
| mtd->erasesize = sect_size; |
| |
| return 0; |
| } |
| |
| int cfi_mtd_init(void) |
| { |
| struct mtd_info *mtd; |
| flash_info_t *fi; |
| int error, i; |
| #ifdef CONFIG_MTD_CONCAT |
| int devices_found = 0; |
| struct mtd_info *mtd_list[CONFIG_SYS_MAX_FLASH_BANKS]; |
| #endif |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
| fi = &flash_info[i]; |
| mtd = &cfi_mtd_info[i]; |
| |
| memset(mtd, 0, sizeof(struct mtd_info)); |
| |
| error = cfi_mtd_set_erasesize(mtd, fi); |
| if (error) |
| continue; |
| |
| sprintf(cfi_mtd_names[i], "nor%d", i); |
| mtd->name = cfi_mtd_names[i]; |
| mtd->type = MTD_NORFLASH; |
| mtd->flags = MTD_CAP_NORFLASH; |
| mtd->size = fi->size; |
| mtd->writesize = 1; |
| mtd->writebufsize = mtd->writesize; |
| |
| mtd->_erase = cfi_mtd_erase; |
| mtd->_read = cfi_mtd_read; |
| mtd->_write = cfi_mtd_write; |
| mtd->_sync = cfi_mtd_sync; |
| mtd->_lock = cfi_mtd_lock; |
| mtd->_unlock = cfi_mtd_unlock; |
| mtd->priv = fi; |
| |
| if (add_mtd_device(mtd)) |
| return -ENOMEM; |
| |
| #ifdef CONFIG_MTD_CONCAT |
| mtd_list[devices_found++] = mtd; |
| #endif |
| } |
| |
| #ifdef CONFIG_MTD_CONCAT |
| if (devices_found > 1) { |
| /* |
| * We detected multiple devices. Concatenate them together. |
| */ |
| sprintf(c_mtd_name, "nor%d", devices_found); |
| mtd = mtd_concat_create(mtd_list, devices_found, c_mtd_name); |
| |
| if (mtd == NULL) |
| return -ENXIO; |
| |
| if (add_mtd_device(mtd)) |
| return -ENOMEM; |
| } |
| #endif /* CONFIG_MTD_CONCAT */ |
| |
| return 0; |
| } |