blob: ec5d9ecc489406b95e89a48971e23626e63ad339 [file] [log] [blame]
#include <config.h>
#include <74xx_7xx.h>
#include "version.h"
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include "../../Marvell/include/mv_gen_reg.h"
#ifdef CONFIG_ECC
/* Galileo specific asm code for initializing ECC */
.globl board_relocate_rom
board_relocate_rom:
mflr r7
/* update the location of the GT registers */
lis r11, CFG_GT_REGS@h
/* if we're using ECC, we must use the DMA engine to copy ourselves */
bl start_idma_transfer_0
bl wait_for_idma_0
bl stop_idma_engine_0
mtlr r7
blr
.globl board_init_ecc
board_init_ecc:
mflr r7
/* NOTE: r10 still contains the location we've been relocated to
* which happens to be TOP_OF_RAM - CFG_MONITOR_LEN */
/* now that we're running from ram, init the rest of main memory
* for ECC use */
lis r8, CFG_MONITOR_LEN@h
ori r8, r8, CFG_MONITOR_LEN@l
divw r3, r10, r8
/* set up the counter, and init the starting address */
mtctr r3
li r12, 0
/* bytes per transfer */
mr r5, r8
about_to_init_ecc:
1: mr r3, r12
mr r4, r12
bl start_idma_transfer_0
bl wait_for_idma_0
bl stop_idma_engine_0
add r12, r12, r8
bdnz 1b
mtlr r7
blr
/* r3: dest addr
* r4: source addr
* r5: byte count
* r11: gt regbase
* trashes: r6, r5
*/
start_idma_transfer_0:
/* set the byte count, including the OWN bit */
mr r6, r11
ori r6, r6, CHANNEL0_DMA_BYTE_COUNT
stwbrx r5, 0, (r6)
/* set the source address */
mr r6, r11
ori r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
stwbrx r4, 0, (r6)
/* set the dest address */
mr r6, r11
ori r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
stwbrx r3, 0, (r6)
/* set the next record pointer */
li r5, 0
mr r6, r11
ori r6, r6, CHANNEL0NEXT_RECORD_POINTER
stwbrx r5, 0, (r6)
/* set the low control register */
/* bit 9 is NON chained mode, bit 31 is new style descriptors.
bit 12 is channel enable */
ori r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
/* 15 shifted by 16 (oris) == bit 31 */
oris r5, r5, (1 << 15)
mr r6, r11
ori r6, r6, CHANNEL0CONTROL
stwbrx r5, 0, (r6)
blr
/* this waits for the bytecount to return to zero, indicating
* that the trasfer is complete */
wait_for_idma_0:
mr r5, r11
lis r6, 0xff
ori r6, r6, 0xffff
ori r5, r5, CHANNEL0_DMA_BYTE_COUNT
1: lwbrx r4, 0, (r5)
and. r4, r4, r6
bne 1b
blr
/* this turns off channel 0 of the idma engine */
stop_idma_engine_0:
/* shut off the DMA engine */
li r5, 0
mr r6, r11
ori r6, r6, CHANNEL0CONTROL
stwbrx r5, 0, (r6)
blr
#endif
#ifdef CFG_BOARD_ASM_INIT
/* NOTE: trashes r3-r7 */
.globl board_asm_init
board_asm_init:
/* just move the GT registers to where they belong */
lis r3, CFG_DFL_GT_REGS@h
ori r3, r3, CFG_DFL_GT_REGS@l
lis r4, CFG_GT_REGS@h
ori r4, r4, CFG_GT_REGS@l
li r5, INTERNAL_SPACE_DECODE
/* test to see if we've already moved */
lwbrx r6, r5, r4
andi. r6, r6, 0xffff
/* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
/* rlwinm r7, r4, 8, 16, 31
rlwinm r7, r4, 12, 16, 31 */ /* original */
rlwinm r7, r4, 16, 16, 31
/* -----------------------------------------------------*/
cmp cr0, r7, r6
beqlr
/* nope, have to move the registers */
lwbrx r6, r5, r3
andis. r6, r6, 0xffff
or r6, r6, r7
stwbrx r6, r5, r3
/* now, poll for the change */
1: lwbrx r7, r5, r4
cmp cr0, r7, r6
bne 1b
lis r3, CFG_INT_SRAM_BASE@h
ori r3, r3, CFG_INT_SRAM_BASE@l
rlwinm r3, r3, 16, 16, 31
lis r4, CFG_GT_REGS@h
ori r4, r4, CFG_GT_REGS@l
li r5, INTEGRATED_SRAM_BASE_ADDR
stwbrx r3, r5, r4
2: lwbrx r6, r5, r4
cmp cr0, r3, r6
bne 2b
/* done! */
blr
#endif
/* For use of the debug LEDs */
.global led_on0_relocated
led_on0_relocated:
xor r21, r21, r21
xor r18, r18, r18
lis r18, 0xFC80
ori r18, r18, 0x8000
/* stw r21, 0x0(r18) */
sync
blr
.global led_off0_relocated
led_off0_relocated:
xor r21, r21, r21
xor r18, r18, r18
lis r18, 0xFC81
ori r18, r18, 0x4000
/* stw r21, 0x0(r18) */
sync
blr
.global led_on0
led_on0:
xor r18, r18, r18
lis r18, 0x1c80
ori r18, r18, 0x8000
/* stw r18, 0x0(r18) */
sync
blr
.global led_off0
led_off0:
xor r18, r18, r18
lis r18, 0x1c81
ori r18, r18, 0x4000
/* stw r18, 0x0(r18) */
sync
blr
.global led_on1
led_on1:
xor r18, r18, r18
lis r18, 0x1c80
ori r18, r18, 0xc000
/* stw r18, 0x0(r18) */
sync
blr
.global led_off1
led_off1:
xor r18, r18, r18
lis r18, 0x1c81
ori r18, r18, 0x8000
/* stw r18, 0x0(r18) */
sync
blr
.global led_on2
led_on2:
xor r18, r18, r18
lis r18, 0x1c81
ori r18, r18, 0x0000
/* stw r18, 0x0(r18) */
sync
blr
.global led_off2
led_off2:
xor r18, r18, r18
lis r18, 0x1c81
ori r18, r18, 0xc000
/* stw r18, 0x0(r18) */
sync
blr