| /* |
| * linux/lib/vsprintf.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| */ |
| |
| /* vsprintf.c -- Lars Wirzenius & Linus Torvalds. */ |
| /* |
| * Wirzenius wrote this portably, Torvalds fucked it up :-) |
| * |
| * from hush: simple_itoa() was lifted from boa-0.93.15 |
| */ |
| |
| #include <common.h> |
| #include <charset.h> |
| #include <efi_loader.h> |
| #include <div64.h> |
| #include <hexdump.h> |
| #include <stdarg.h> |
| #include <linux/ctype.h> |
| #include <linux/err.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| |
| #define noinline __attribute__((noinline)) |
| |
| /* we use this so that we can do without the ctype library */ |
| #define is_digit(c) ((c) >= '0' && (c) <= '9') |
| |
| static int skip_atoi(const char **s) |
| { |
| int i = 0; |
| |
| while (is_digit(**s)) |
| i = i * 10 + *((*s)++) - '0'; |
| |
| return i; |
| } |
| |
| /* Decimal conversion is by far the most typical, and is used |
| * for /proc and /sys data. This directly impacts e.g. top performance |
| * with many processes running. We optimize it for speed |
| * using code from |
| * http://www.cs.uiowa.edu/~jones/bcd/decimal.html |
| * (with permission from the author, Douglas W. Jones). */ |
| |
| /* Formats correctly any integer in [0,99999]. |
| * Outputs from one to five digits depending on input. |
| * On i386 gcc 4.1.2 -O2: ~250 bytes of code. */ |
| static char *put_dec_trunc(char *buf, unsigned q) |
| { |
| unsigned d3, d2, d1, d0; |
| d1 = (q>>4) & 0xf; |
| d2 = (q>>8) & 0xf; |
| d3 = (q>>12); |
| |
| d0 = 6*(d3 + d2 + d1) + (q & 0xf); |
| q = (d0 * 0xcd) >> 11; |
| d0 = d0 - 10*q; |
| *buf++ = d0 + '0'; /* least significant digit */ |
| d1 = q + 9*d3 + 5*d2 + d1; |
| if (d1 != 0) { |
| q = (d1 * 0xcd) >> 11; |
| d1 = d1 - 10*q; |
| *buf++ = d1 + '0'; /* next digit */ |
| |
| d2 = q + 2*d2; |
| if ((d2 != 0) || (d3 != 0)) { |
| q = (d2 * 0xd) >> 7; |
| d2 = d2 - 10*q; |
| *buf++ = d2 + '0'; /* next digit */ |
| |
| d3 = q + 4*d3; |
| if (d3 != 0) { |
| q = (d3 * 0xcd) >> 11; |
| d3 = d3 - 10*q; |
| *buf++ = d3 + '0'; /* next digit */ |
| if (q != 0) |
| *buf++ = q + '0'; /* most sign. digit */ |
| } |
| } |
| } |
| return buf; |
| } |
| /* Same with if's removed. Always emits five digits */ |
| static char *put_dec_full(char *buf, unsigned q) |
| { |
| /* BTW, if q is in [0,9999], 8-bit ints will be enough, */ |
| /* but anyway, gcc produces better code with full-sized ints */ |
| unsigned d3, d2, d1, d0; |
| d1 = (q>>4) & 0xf; |
| d2 = (q>>8) & 0xf; |
| d3 = (q>>12); |
| |
| /* |
| * Possible ways to approx. divide by 10 |
| * gcc -O2 replaces multiply with shifts and adds |
| * (x * 0xcd) >> 11: 11001101 - shorter code than * 0x67 (on i386) |
| * (x * 0x67) >> 10: 1100111 |
| * (x * 0x34) >> 9: 110100 - same |
| * (x * 0x1a) >> 8: 11010 - same |
| * (x * 0x0d) >> 7: 1101 - same, shortest code (on i386) |
| */ |
| |
| d0 = 6*(d3 + d2 + d1) + (q & 0xf); |
| q = (d0 * 0xcd) >> 11; |
| d0 = d0 - 10*q; |
| *buf++ = d0 + '0'; |
| d1 = q + 9*d3 + 5*d2 + d1; |
| q = (d1 * 0xcd) >> 11; |
| d1 = d1 - 10*q; |
| *buf++ = d1 + '0'; |
| |
| d2 = q + 2*d2; |
| q = (d2 * 0xd) >> 7; |
| d2 = d2 - 10*q; |
| *buf++ = d2 + '0'; |
| |
| d3 = q + 4*d3; |
| q = (d3 * 0xcd) >> 11; /* - shorter code */ |
| /* q = (d3 * 0x67) >> 10; - would also work */ |
| d3 = d3 - 10*q; |
| *buf++ = d3 + '0'; |
| *buf++ = q + '0'; |
| return buf; |
| } |
| /* No inlining helps gcc to use registers better */ |
| static noinline char *put_dec(char *buf, uint64_t num) |
| { |
| while (1) { |
| unsigned rem; |
| if (num < 100000) |
| return put_dec_trunc(buf, num); |
| rem = do_div(num, 100000); |
| buf = put_dec_full(buf, rem); |
| } |
| } |
| |
| #define ZEROPAD 1 /* pad with zero */ |
| #define SIGN 2 /* unsigned/signed long */ |
| #define PLUS 4 /* show plus */ |
| #define SPACE 8 /* space if plus */ |
| #define LEFT 16 /* left justified */ |
| #define SMALL 32 /* Must be 32 == 0x20 */ |
| #define SPECIAL 64 /* 0x */ |
| |
| /* |
| * Macro to add a new character to our output string, but only if it will |
| * fit. The macro moves to the next character position in the output string. |
| */ |
| #define ADDCH(str, ch) do { \ |
| if ((str) < end) \ |
| *(str) = (ch); \ |
| ++str; \ |
| } while (0) |
| |
| static char *number(char *buf, char *end, u64 num, |
| int base, int size, int precision, int type) |
| { |
| /* we are called with base 8, 10 or 16, only, thus don't need "G..." */ |
| static const char digits[16] = "0123456789ABCDEF"; |
| |
| char tmp[66]; |
| char sign; |
| char locase; |
| int need_pfx = ((type & SPECIAL) && base != 10); |
| int i; |
| |
| /* locase = 0 or 0x20. ORing digits or letters with 'locase' |
| * produces same digits or (maybe lowercased) letters */ |
| locase = (type & SMALL); |
| if (type & LEFT) |
| type &= ~ZEROPAD; |
| sign = 0; |
| if (type & SIGN) { |
| if ((s64) num < 0) { |
| sign = '-'; |
| num = -(s64) num; |
| size--; |
| } else if (type & PLUS) { |
| sign = '+'; |
| size--; |
| } else if (type & SPACE) { |
| sign = ' '; |
| size--; |
| } |
| } |
| if (need_pfx) { |
| size--; |
| if (base == 16) |
| size--; |
| } |
| |
| /* generate full string in tmp[], in reverse order */ |
| i = 0; |
| if (num == 0) |
| tmp[i++] = '0'; |
| /* Generic code, for any base: |
| else do { |
| tmp[i++] = (digits[do_div(num,base)] | locase); |
| } while (num != 0); |
| */ |
| else if (base != 10) { /* 8 or 16 */ |
| int mask = base - 1; |
| int shift = 3; |
| |
| if (base == 16) |
| shift = 4; |
| |
| do { |
| tmp[i++] = (digits[((unsigned char)num) & mask] |
| | locase); |
| num >>= shift; |
| } while (num); |
| } else { /* base 10 */ |
| i = put_dec(tmp, num) - tmp; |
| } |
| |
| /* printing 100 using %2d gives "100", not "00" */ |
| if (i > precision) |
| precision = i; |
| /* leading space padding */ |
| size -= precision; |
| if (!(type & (ZEROPAD + LEFT))) { |
| while (--size >= 0) |
| ADDCH(buf, ' '); |
| } |
| /* sign */ |
| if (sign) |
| ADDCH(buf, sign); |
| /* "0x" / "0" prefix */ |
| if (need_pfx) { |
| ADDCH(buf, '0'); |
| if (base == 16) |
| ADDCH(buf, 'X' | locase); |
| } |
| /* zero or space padding */ |
| if (!(type & LEFT)) { |
| char c = (type & ZEROPAD) ? '0' : ' '; |
| |
| while (--size >= 0) |
| ADDCH(buf, c); |
| } |
| /* hmm even more zero padding? */ |
| while (i <= --precision) |
| ADDCH(buf, '0'); |
| /* actual digits of result */ |
| while (--i >= 0) |
| ADDCH(buf, tmp[i]); |
| /* trailing space padding */ |
| while (--size >= 0) |
| ADDCH(buf, ' '); |
| return buf; |
| } |
| |
| static char *string(char *buf, char *end, char *s, int field_width, |
| int precision, int flags) |
| { |
| int len, i; |
| |
| if (s == NULL) |
| s = "<NULL>"; |
| |
| len = strnlen(s, precision); |
| |
| if (!(flags & LEFT)) |
| while (len < field_width--) |
| ADDCH(buf, ' '); |
| for (i = 0; i < len; ++i) |
| ADDCH(buf, *s++); |
| while (len < field_width--) |
| ADDCH(buf, ' '); |
| return buf; |
| } |
| |
| /* U-Boot uses UTF-16 strings in the EFI context only. */ |
| #if CONFIG_IS_ENABLED(EFI_LOADER) && !defined(API_BUILD) |
| static char *string16(char *buf, char *end, u16 *s, int field_width, |
| int precision, int flags) |
| { |
| const u16 *str = s ? s : L"<NULL>"; |
| ssize_t i, len = utf16_strnlen(str, precision); |
| |
| if (!(flags & LEFT)) |
| for (; len < field_width; --field_width) |
| ADDCH(buf, ' '); |
| for (i = 0; i < len && buf + utf16_utf8_strnlen(str, 1) <= end; ++i) { |
| s32 s = utf16_get(&str); |
| |
| if (s < 0) |
| s = '?'; |
| utf8_put(s, &buf); |
| } |
| for (; len < field_width; --field_width) |
| ADDCH(buf, ' '); |
| return buf; |
| } |
| |
| #if CONFIG_IS_ENABLED(EFI_DEVICE_PATH_TO_TEXT) |
| static char *device_path_string(char *buf, char *end, void *dp, int field_width, |
| int precision, int flags) |
| { |
| u16 *str; |
| |
| /* If dp == NULL output the string '<NULL>' */ |
| if (!dp) |
| return string16(buf, end, dp, field_width, precision, flags); |
| |
| str = efi_dp_str((struct efi_device_path *)dp); |
| if (!str) |
| return ERR_PTR(-ENOMEM); |
| |
| buf = string16(buf, end, str, field_width, precision, flags); |
| efi_free_pool(str); |
| return buf; |
| } |
| #endif |
| #endif |
| |
| #ifdef CONFIG_CMD_NET |
| static char *mac_address_string(char *buf, char *end, u8 *addr, int field_width, |
| int precision, int flags) |
| { |
| /* (6 * 2 hex digits), 5 colons and trailing zero */ |
| char mac_addr[6 * 3]; |
| char *p = mac_addr; |
| int i; |
| |
| for (i = 0; i < 6; i++) { |
| p = hex_byte_pack(p, addr[i]); |
| if (!(flags & SPECIAL) && i != 5) |
| *p++ = ':'; |
| } |
| *p = '\0'; |
| |
| return string(buf, end, mac_addr, field_width, precision, |
| flags & ~SPECIAL); |
| } |
| |
| static char *ip6_addr_string(char *buf, char *end, u8 *addr, int field_width, |
| int precision, int flags) |
| { |
| /* (8 * 4 hex digits), 7 colons and trailing zero */ |
| char ip6_addr[8 * 5]; |
| char *p = ip6_addr; |
| int i; |
| |
| for (i = 0; i < 8; i++) { |
| p = hex_byte_pack(p, addr[2 * i]); |
| p = hex_byte_pack(p, addr[2 * i + 1]); |
| if (!(flags & SPECIAL) && i != 7) |
| *p++ = ':'; |
| } |
| *p = '\0'; |
| |
| return string(buf, end, ip6_addr, field_width, precision, |
| flags & ~SPECIAL); |
| } |
| |
| static char *ip4_addr_string(char *buf, char *end, u8 *addr, int field_width, |
| int precision, int flags) |
| { |
| /* (4 * 3 decimal digits), 3 dots and trailing zero */ |
| char ip4_addr[4 * 4]; |
| char temp[3]; /* hold each IP quad in reverse order */ |
| char *p = ip4_addr; |
| int i, digits; |
| |
| for (i = 0; i < 4; i++) { |
| digits = put_dec_trunc(temp, addr[i]) - temp; |
| /* reverse the digits in the quad */ |
| while (digits--) |
| *p++ = temp[digits]; |
| if (i != 3) |
| *p++ = '.'; |
| } |
| *p = '\0'; |
| |
| return string(buf, end, ip4_addr, field_width, precision, |
| flags & ~SPECIAL); |
| } |
| #endif |
| |
| #ifdef CONFIG_LIB_UUID |
| /* |
| * This works (roughly) the same way as linux's, but we currently always |
| * print lower-case (ie. we just keep %pUB and %pUL for compat with linux), |
| * mostly just because that is what uuid_bin_to_str() supports. |
| * |
| * %pUb: 01020304-0506-0708-090a-0b0c0d0e0f10 |
| * %pUl: 04030201-0605-0807-090a-0b0c0d0e0f10 |
| */ |
| static char *uuid_string(char *buf, char *end, u8 *addr, int field_width, |
| int precision, int flags, const char *fmt) |
| { |
| char uuid[UUID_STR_LEN + 1]; |
| int str_format = UUID_STR_FORMAT_STD; |
| |
| switch (*(++fmt)) { |
| case 'L': |
| case 'l': |
| str_format = UUID_STR_FORMAT_GUID; |
| break; |
| case 'B': |
| case 'b': |
| /* this is the default */ |
| break; |
| default: |
| break; |
| } |
| |
| if (addr) |
| uuid_bin_to_str(addr, uuid, str_format); |
| else |
| strcpy(uuid, "<NULL>"); |
| |
| return string(buf, end, uuid, field_width, precision, flags); |
| } |
| #endif |
| |
| /* |
| * Show a '%p' thing. A kernel extension is that the '%p' is followed |
| * by an extra set of alphanumeric characters that are extended format |
| * specifiers. |
| * |
| * Right now we handle: |
| * |
| * - 'M' For a 6-byte MAC address, it prints the address in the |
| * usual colon-separated hex notation |
| * - 'I' [46] for IPv4/IPv6 addresses printed in the usual way (dot-separated |
| * decimal for v4 and colon separated network-order 16 bit hex for v6) |
| * - 'i' [46] for 'raw' IPv4/IPv6 addresses, IPv6 omits the colons, IPv4 is |
| * currently the same |
| * |
| * Note: The difference between 'S' and 'F' is that on ia64 and ppc64 |
| * function pointers are really function descriptors, which contain a |
| * pointer to the real address. |
| */ |
| static char *pointer(const char *fmt, char *buf, char *end, void *ptr, |
| int field_width, int precision, int flags) |
| { |
| u64 num = (uintptr_t)ptr; |
| |
| /* |
| * Being a boot loader, we explicitly allow pointers to |
| * (physical) address null. |
| */ |
| #if 0 |
| if (!ptr) |
| return string(buf, end, "(null)", field_width, precision, |
| flags); |
| #endif |
| |
| switch (*fmt) { |
| /* Device paths only exist in the EFI context. */ |
| #if CONFIG_IS_ENABLED(EFI_DEVICE_PATH_TO_TEXT) && !defined(API_BUILD) |
| case 'D': |
| return device_path_string(buf, end, ptr, field_width, |
| precision, flags); |
| #endif |
| case 'a': |
| flags |= SPECIAL | ZEROPAD; |
| |
| switch (fmt[1]) { |
| case 'p': |
| default: |
| field_width = sizeof(phys_addr_t) * 2 + 2; |
| num = *(phys_addr_t *)ptr; |
| break; |
| } |
| break; |
| #ifdef CONFIG_CMD_NET |
| case 'm': |
| flags |= SPECIAL; |
| /* Fallthrough */ |
| case 'M': |
| return mac_address_string(buf, end, ptr, field_width, |
| precision, flags); |
| case 'i': |
| flags |= SPECIAL; |
| /* Fallthrough */ |
| case 'I': |
| if (fmt[1] == '6') |
| return ip6_addr_string(buf, end, ptr, field_width, |
| precision, flags); |
| if (fmt[1] == '4') |
| return ip4_addr_string(buf, end, ptr, field_width, |
| precision, flags); |
| flags &= ~SPECIAL; |
| break; |
| #endif |
| #ifdef CONFIG_LIB_UUID |
| case 'U': |
| return uuid_string(buf, end, ptr, field_width, precision, |
| flags, fmt); |
| #endif |
| default: |
| break; |
| } |
| flags |= SMALL; |
| if (field_width == -1) { |
| field_width = 2*sizeof(void *); |
| flags |= ZEROPAD; |
| } |
| return number(buf, end, num, 16, field_width, precision, flags); |
| } |
| |
| static int vsnprintf_internal(char *buf, size_t size, const char *fmt, |
| va_list args) |
| { |
| u64 num; |
| int base; |
| char *str; |
| |
| int flags; /* flags to number() */ |
| |
| int field_width; /* width of output field */ |
| int precision; /* min. # of digits for integers; max |
| number of chars for from string */ |
| int qualifier; /* 'h', 'l', or 'L' for integer fields */ |
| /* 'z' support added 23/7/1999 S.H. */ |
| /* 'z' changed to 'Z' --davidm 1/25/99 */ |
| /* 't' added for ptrdiff_t */ |
| char *end = buf + size; |
| |
| /* Make sure end is always >= buf - do we want this in U-Boot? */ |
| if (end < buf) { |
| end = ((void *)-1); |
| size = end - buf; |
| } |
| str = buf; |
| |
| for (; *fmt ; ++fmt) { |
| if (*fmt != '%') { |
| ADDCH(str, *fmt); |
| continue; |
| } |
| |
| /* process flags */ |
| flags = 0; |
| repeat: |
| ++fmt; /* this also skips first '%' */ |
| switch (*fmt) { |
| case '-': |
| flags |= LEFT; |
| goto repeat; |
| case '+': |
| flags |= PLUS; |
| goto repeat; |
| case ' ': |
| flags |= SPACE; |
| goto repeat; |
| case '#': |
| flags |= SPECIAL; |
| goto repeat; |
| case '0': |
| flags |= ZEROPAD; |
| goto repeat; |
| } |
| |
| /* get field width */ |
| field_width = -1; |
| if (is_digit(*fmt)) |
| field_width = skip_atoi(&fmt); |
| else if (*fmt == '*') { |
| ++fmt; |
| /* it's the next argument */ |
| field_width = va_arg(args, int); |
| if (field_width < 0) { |
| field_width = -field_width; |
| flags |= LEFT; |
| } |
| } |
| |
| /* get the precision */ |
| precision = -1; |
| if (*fmt == '.') { |
| ++fmt; |
| if (is_digit(*fmt)) |
| precision = skip_atoi(&fmt); |
| else if (*fmt == '*') { |
| ++fmt; |
| /* it's the next argument */ |
| precision = va_arg(args, int); |
| } |
| if (precision < 0) |
| precision = 0; |
| } |
| |
| /* get the conversion qualifier */ |
| qualifier = -1; |
| if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || |
| *fmt == 'Z' || *fmt == 'z' || *fmt == 't') { |
| qualifier = *fmt; |
| ++fmt; |
| if (qualifier == 'l' && *fmt == 'l') { |
| qualifier = 'L'; |
| ++fmt; |
| } |
| } |
| |
| /* default base */ |
| base = 10; |
| |
| switch (*fmt) { |
| case 'c': |
| if (!(flags & LEFT)) { |
| while (--field_width > 0) |
| ADDCH(str, ' '); |
| } |
| ADDCH(str, (unsigned char) va_arg(args, int)); |
| while (--field_width > 0) |
| ADDCH(str, ' '); |
| continue; |
| |
| case 's': |
| /* U-Boot uses UTF-16 strings in the EFI context only. */ |
| #if CONFIG_IS_ENABLED(EFI_LOADER) && !defined(API_BUILD) |
| if (qualifier == 'l') { |
| str = string16(str, end, va_arg(args, u16 *), |
| field_width, precision, flags); |
| } else |
| #endif |
| { |
| str = string(str, end, va_arg(args, char *), |
| field_width, precision, flags); |
| } |
| continue; |
| |
| case 'p': |
| str = pointer(fmt + 1, str, end, |
| va_arg(args, void *), |
| field_width, precision, flags); |
| if (IS_ERR(str)) |
| return PTR_ERR(str); |
| /* Skip all alphanumeric pointer suffixes */ |
| while (isalnum(fmt[1])) |
| fmt++; |
| continue; |
| |
| case 'n': |
| if (qualifier == 'l') { |
| long *ip = va_arg(args, long *); |
| *ip = (str - buf); |
| } else { |
| int *ip = va_arg(args, int *); |
| *ip = (str - buf); |
| } |
| continue; |
| |
| case '%': |
| ADDCH(str, '%'); |
| continue; |
| |
| /* integer number formats - set up the flags and "break" */ |
| case 'o': |
| base = 8; |
| break; |
| |
| case 'x': |
| flags |= SMALL; |
| case 'X': |
| base = 16; |
| break; |
| |
| case 'd': |
| case 'i': |
| flags |= SIGN; |
| case 'u': |
| break; |
| |
| default: |
| ADDCH(str, '%'); |
| if (*fmt) |
| ADDCH(str, *fmt); |
| else |
| --fmt; |
| continue; |
| } |
| if (qualifier == 'L') /* "quad" for 64 bit variables */ |
| num = va_arg(args, unsigned long long); |
| else if (qualifier == 'l') { |
| num = va_arg(args, unsigned long); |
| if (flags & SIGN) |
| num = (signed long) num; |
| } else if (qualifier == 'Z' || qualifier == 'z') { |
| num = va_arg(args, size_t); |
| } else if (qualifier == 't') { |
| num = va_arg(args, ptrdiff_t); |
| } else if (qualifier == 'h') { |
| num = (unsigned short) va_arg(args, int); |
| if (flags & SIGN) |
| num = (signed short) num; |
| } else { |
| num = va_arg(args, unsigned int); |
| if (flags & SIGN) |
| num = (signed int) num; |
| } |
| str = number(str, end, num, base, field_width, precision, |
| flags); |
| } |
| |
| if (size > 0) { |
| ADDCH(str, '\0'); |
| if (str > end) |
| end[-1] = '\0'; |
| --str; |
| } |
| /* the trailing null byte doesn't count towards the total */ |
| return str - buf; |
| } |
| |
| int vsnprintf(char *buf, size_t size, const char *fmt, |
| va_list args) |
| { |
| return vsnprintf_internal(buf, size, fmt, args); |
| } |
| |
| int vscnprintf(char *buf, size_t size, const char *fmt, va_list args) |
| { |
| int i; |
| |
| i = vsnprintf(buf, size, fmt, args); |
| |
| if (likely(i < size)) |
| return i; |
| if (size != 0) |
| return size - 1; |
| return 0; |
| } |
| |
| int snprintf(char *buf, size_t size, const char *fmt, ...) |
| { |
| va_list args; |
| int i; |
| |
| va_start(args, fmt); |
| i = vsnprintf(buf, size, fmt, args); |
| va_end(args); |
| |
| return i; |
| } |
| |
| int scnprintf(char *buf, size_t size, const char *fmt, ...) |
| { |
| va_list args; |
| int i; |
| |
| va_start(args, fmt); |
| i = vscnprintf(buf, size, fmt, args); |
| va_end(args); |
| |
| return i; |
| } |
| |
| /** |
| * Format a string and place it in a buffer (va_list version) |
| * |
| * @param buf The buffer to place the result into |
| * @param fmt The format string to use |
| * @param args Arguments for the format string |
| * |
| * The function returns the number of characters written |
| * into @buf. Use vsnprintf() or vscnprintf() in order to avoid |
| * buffer overflows. |
| * |
| * If you're not already dealing with a va_list consider using sprintf(). |
| */ |
| int vsprintf(char *buf, const char *fmt, va_list args) |
| { |
| return vsnprintf_internal(buf, INT_MAX, fmt, args); |
| } |
| |
| int sprintf(char *buf, const char *fmt, ...) |
| { |
| va_list args; |
| int i; |
| |
| va_start(args, fmt); |
| i = vsprintf(buf, fmt, args); |
| va_end(args); |
| return i; |
| } |
| |
| #if CONFIG_IS_ENABLED(PRINTF) |
| int printf(const char *fmt, ...) |
| { |
| va_list args; |
| uint i; |
| char printbuffer[CONFIG_SYS_PBSIZE]; |
| |
| va_start(args, fmt); |
| |
| /* |
| * For this to work, printbuffer must be larger than |
| * anything we ever want to print. |
| */ |
| i = vscnprintf(printbuffer, sizeof(printbuffer), fmt, args); |
| va_end(args); |
| |
| /* Handle error */ |
| if (i <= 0) |
| return i; |
| /* Print the string */ |
| puts(printbuffer); |
| return i; |
| } |
| |
| int vprintf(const char *fmt, va_list args) |
| { |
| uint i; |
| char printbuffer[CONFIG_SYS_PBSIZE]; |
| |
| /* |
| * For this to work, printbuffer must be larger than |
| * anything we ever want to print. |
| */ |
| i = vscnprintf(printbuffer, sizeof(printbuffer), fmt, args); |
| |
| /* Handle error */ |
| if (i <= 0) |
| return i; |
| /* Print the string */ |
| puts(printbuffer); |
| return i; |
| } |
| #endif |
| |
| char *simple_itoa(ulong i) |
| { |
| /* 21 digits plus null terminator, good for 64-bit or smaller ints */ |
| static char local[22]; |
| char *p = &local[21]; |
| |
| *p-- = '\0'; |
| do { |
| *p-- = '0' + i % 10; |
| i /= 10; |
| } while (i > 0); |
| return p + 1; |
| } |
| |
| /* We don't seem to have %'d in U-Boot */ |
| void print_grouped_ull(unsigned long long int_val, int digits) |
| { |
| char str[21], *s; |
| int grab = 3; |
| |
| digits = (digits + 2) / 3; |
| sprintf(str, "%*llu", digits * 3, int_val); |
| for (s = str; *s; s += grab) { |
| if (s != str) |
| putc(s[-1] != ' ' ? ',' : ' '); |
| printf("%.*s", grab, s); |
| grab = 3; |
| } |
| } |
| |
| bool str2off(const char *p, loff_t *num) |
| { |
| char *endptr; |
| |
| *num = simple_strtoull(p, &endptr, 16); |
| return *p != '\0' && *endptr == '\0'; |
| } |
| |
| bool str2long(const char *p, ulong *num) |
| { |
| char *endptr; |
| |
| *num = simple_strtoul(p, &endptr, 16); |
| return *p != '\0' && *endptr == '\0'; |
| } |