| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2021 - 2022, Xilinx, Inc. |
| * Copyright (C) 2022, Advanced Micro Devices, Inc. |
| * |
| * Michal Simek <michal.simek@amd.com> |
| */ |
| |
| #include <common.h> |
| #include <cpu_func.h> |
| #include <fdtdec.h> |
| #include <init.h> |
| #include <env_internal.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <time.h> |
| #include <asm/cache.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include "../common/board.h" |
| |
| #include <linux/bitfield.h> |
| #include <debug_uart.h> |
| #include <generated/dt.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int board_init(void) |
| { |
| printf("EL Level:\tEL%d\n", current_el()); |
| |
| return 0; |
| } |
| |
| static u32 platform_id, platform_version; |
| |
| char *soc_name_decode(void) |
| { |
| char *name, *platform_name; |
| |
| switch (platform_id) { |
| case VERSAL_NET_SPP: |
| platform_name = "ipp"; |
| break; |
| case VERSAL_NET_EMU: |
| platform_name = "emu"; |
| break; |
| case VERSAL_NET_QEMU: |
| platform_name = "qemu"; |
| break; |
| default: |
| return NULL; |
| } |
| |
| /* |
| * --rev. are 6 chars |
| * max platform name is qemu which is 4 chars |
| * platform version number are 1+1 |
| * Plus 1 char for \n |
| */ |
| name = calloc(1, strlen(CONFIG_SYS_BOARD) + 13); |
| if (!name) |
| return NULL; |
| |
| sprintf(name, "%s-%s-rev%d.%d", CONFIG_SYS_BOARD, |
| platform_name, platform_version / 10, |
| platform_version % 10); |
| |
| return name; |
| } |
| |
| bool soc_detection(void) |
| { |
| u32 version, ps_version; |
| |
| version = readl(PMC_TAP_VERSION); |
| platform_id = FIELD_GET(PLATFORM_MASK, version); |
| ps_version = FIELD_GET(PS_VERSION_MASK, version); |
| |
| debug("idcode %x, version %x, usercode %x\n", |
| readl(PMC_TAP_IDCODE), version, |
| readl(PMC_TAP_USERCODE)); |
| |
| debug("pmc_ver %lx, ps version %x, rtl version %lx\n", |
| FIELD_GET(PMC_VERSION_MASK, version), |
| ps_version, |
| FIELD_GET(RTL_VERSION_MASK, version)); |
| |
| platform_version = FIELD_GET(PLATFORM_VERSION_MASK, version); |
| |
| if (platform_id == VERSAL_NET_SPP || |
| platform_id == VERSAL_NET_EMU) { |
| if (ps_version == PS_VERSION_PRODUCTION) { |
| /* |
| * ES1 version ends at 1.9 version where there was +9 |
| * used because of IPP/SPP conversion. Production |
| * version have platform_version started from 0 again |
| * that's why adding +20 to continue with the same line. |
| * It means the last ES1 version ends at 1.9 version and |
| * new PRODUCTION line starts at 2.0. |
| */ |
| platform_version += 20; |
| } else { |
| /* |
| * 9 is diff for |
| * 0 means 0.9 version |
| * 1 means 1.0 version |
| * 2 means 1.1 version |
| * etc, |
| */ |
| platform_version += 9; |
| } |
| } |
| |
| debug("Platform id: %d version: %d.%d\n", platform_id, |
| platform_version / 10, platform_version % 10); |
| |
| return true; |
| } |
| |
| int board_early_init_f(void) |
| { |
| if (IS_ENABLED(CONFIG_DEBUG_UART)) { |
| /* Uart debug for sure */ |
| debug_uart_init(); |
| puts("Debug uart enabled\n"); /* or printch() */ |
| } |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| u32 val; |
| |
| if (current_el() != 3) |
| return 0; |
| |
| debug("iou_switch ctrl div0 %x\n", |
| readl(&crlapb_base->iou_switch_ctrl)); |
| |
| writel(IOU_SWITCH_CTRL_CLKACT_BIT | |
| (CONFIG_IOU_SWITCH_DIVISOR0 << IOU_SWITCH_CTRL_DIVISOR0_SHIFT), |
| &crlapb_base->iou_switch_ctrl); |
| |
| /* Global timer init - Program time stamp reference clk */ |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val |= CRL_APB_TIMESTAMP_REF_CTRL_CLKACT_BIT; |
| writel(val, &crlapb_base->timestamp_ref_ctrl); |
| |
| debug("ref ctrl 0x%x\n", |
| readl(&crlapb_base->timestamp_ref_ctrl)); |
| |
| /* Clear reset of timestamp reg */ |
| writel(0, &crlapb_base->rst_timestamp); |
| |
| /* |
| * Program freq register in System counter and |
| * enable system counter. |
| */ |
| writel(CONFIG_COUNTER_FREQUENCY, |
| &iou_scntr_secure->base_frequency_id_register); |
| |
| debug("counter val 0x%x\n", |
| readl(&iou_scntr_secure->base_frequency_id_register)); |
| |
| writel(IOU_SCNTRS_CONTROL_EN, |
| &iou_scntr_secure->counter_control_register); |
| |
| debug("scntrs control 0x%x\n", |
| readl(&iou_scntr_secure->counter_control_register)); |
| debug("timer 0x%llx\n", get_ticks()); |
| debug("timer 0x%llx\n", get_ticks()); |
| |
| return 0; |
| } |
| |
| static u8 versal_net_get_bootmode(void) |
| { |
| u8 bootmode; |
| u32 reg = 0; |
| |
| reg = readl(&crp_base->boot_mode_usr); |
| |
| if (reg >> BOOT_MODE_ALT_SHIFT) |
| reg >>= BOOT_MODE_ALT_SHIFT; |
| |
| bootmode = reg & BOOT_MODES_MASK; |
| |
| return bootmode; |
| } |
| |
| int board_late_init(void) |
| { |
| u8 bootmode; |
| struct udevice *dev; |
| int bootseq = -1; |
| int bootseq_len = 0; |
| int env_targets_len = 0; |
| const char *mode; |
| char *new_targets; |
| char *env_targets; |
| |
| if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { |
| debug("Saved variables - Skipping\n"); |
| return 0; |
| } |
| |
| if (!IS_ENABLED(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)) |
| return 0; |
| |
| bootmode = versal_net_get_bootmode(); |
| |
| puts("Bootmode: "); |
| switch (bootmode) { |
| case USB_MODE: |
| puts("USB_MODE\n"); |
| mode = "usb_dfu0 usb_dfu1"; |
| break; |
| case JTAG_MODE: |
| puts("JTAG_MODE\n"); |
| mode = "jtag pxe dhcp"; |
| break; |
| case QSPI_MODE_24BIT: |
| puts("QSPI_MODE_24\n"); |
| mode = "xspi0"; |
| break; |
| case QSPI_MODE_32BIT: |
| puts("QSPI_MODE_32\n"); |
| mode = "xspi0"; |
| break; |
| case OSPI_MODE: |
| puts("OSPI_MODE\n"); |
| mode = "xspi0"; |
| break; |
| case EMMC_MODE: |
| puts("EMMC_MODE\n"); |
| mode = "mmc"; |
| bootseq = dev_seq(dev); |
| break; |
| case SD_MODE: |
| puts("SD_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@f1040000", &dev)) { |
| puts("Boot from SD0 but without SD0 enabled!\n"); |
| return -1; |
| } |
| debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev)); |
| |
| mode = "mmc"; |
| bootseq = dev_seq(dev); |
| break; |
| case SD1_LSHFT_MODE: |
| puts("LVL_SHFT_"); |
| fallthrough; |
| case SD_MODE1: |
| puts("SD_MODE1\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@f1050000", &dev)) { |
| puts("Boot from SD1 but without SD1 enabled!\n"); |
| return -1; |
| } |
| debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev)); |
| |
| mode = "mmc"; |
| bootseq = dev_seq(dev); |
| break; |
| default: |
| mode = ""; |
| printf("Invalid Boot Mode:0x%x\n", bootmode); |
| break; |
| } |
| |
| if (bootseq >= 0) { |
| bootseq_len = snprintf(NULL, 0, "%i", bootseq); |
| debug("Bootseq len: %x\n", bootseq_len); |
| } |
| |
| /* |
| * One terminating char + one byte for space between mode |
| * and default boot_targets |
| */ |
| env_targets = env_get("boot_targets"); |
| if (env_targets) |
| env_targets_len = strlen(env_targets); |
| |
| new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + |
| bootseq_len); |
| if (!new_targets) |
| return -ENOMEM; |
| |
| if (bootseq >= 0) |
| sprintf(new_targets, "%s%x %s", mode, bootseq, |
| env_targets ? env_targets : ""); |
| else |
| sprintf(new_targets, "%s %s", mode, |
| env_targets ? env_targets : ""); |
| |
| env_set("boot_targets", new_targets); |
| |
| return board_late_init_xilinx(); |
| } |
| |
| int dram_init_banksize(void) |
| { |
| int ret; |
| |
| ret = fdtdec_setup_memory_banksize(); |
| if (ret) |
| return ret; |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| int ret; |
| |
| if (IS_ENABLED(CONFIG_SYS_MEM_RSVD_FOR_MMU)) |
| ret = fdtdec_setup_mem_size_base(); |
| else |
| ret = fdtdec_setup_mem_size_base_lowest(); |
| |
| if (ret) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| void reset_cpu(void) |
| { |
| } |