| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> |
| */ |
| |
| #ifndef _CONFIG_THEADORABLE_H |
| #define _CONFIG_THEADORABLE_H |
| |
| #include <linux/sizes.h> |
| |
| /* |
| * High Level Configuration Options (easy to change) |
| */ |
| |
| /* |
| * TEXT_BASE needs to be below 16MiB, since this area is scrubbed |
| * for DDR ECC byte filling in the SPL before loading the main |
| * U-Boot into it. |
| */ |
| |
| /* |
| * The debugging version enables USB support via defconfig. |
| * This version should also enable all other non-production |
| * interfaces / features. |
| */ |
| |
| /* I2C */ |
| #define CFG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE |
| #define CFG_I2C_MVTWSI_BASE1 MVEBU_TWSI1_BASE |
| |
| /* USB/EHCI configuration */ |
| |
| /* Environment in SPI NOR flash */ |
| |
| #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ |
| |
| /* Keep device tree and initrd in lower memory so the kernel can access them */ |
| #define CFG_EXTRA_ENV_SETTINGS \ |
| "fdt_high=0x10000000\0" \ |
| "initrd_high=0x10000000\0" |
| |
| /* |
| * Bootcounter |
| */ |
| /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */ |
| #define BOOTCOUNT_ADDR 0x1000 |
| |
| /* |
| * mv-common.h should be defined after CMD configs since it used them |
| * to enable certain macros |
| */ |
| #include "mv-common.h" |
| |
| /* |
| * Memory layout while starting into the bin_hdr via the |
| * BootROM: |
| * |
| * 0x4000.4000 - 0x4003.4000 headers space (192KiB) |
| * 0x4000.4030 bin_hdr start address |
| * 0x4003.4000 - 0x4004.7c00 BootROM memory allocations (15KiB) |
| * 0x4007.fffc BootROM stack top |
| * |
| * The address space between 0x4007.fffc and 0x400f.fff is not locked in |
| * L2 cache thus cannot be used. |
| */ |
| |
| /* SPL */ |
| /* Defines for SPL */ |
| |
| /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */ |
| #define CFG_SYS_SDRAM_SIZE SZ_2G |
| |
| #endif /* _CONFIG_THEADORABLE_H */ |