| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright Altera Corporation (C) 2014-2015 |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <div64.h> |
| #include <init.h> |
| #include <ram.h> |
| #include <reset.h> |
| #include <watchdog.h> |
| #include <asm/arch/fpga_manager.h> |
| #include <asm/arch/reset_manager.h> |
| #include <asm/arch/sdram.h> |
| #include <asm/arch/system_manager.h> |
| #include <asm/io.h> |
| |
| #include "sequencer.h" |
| |
| #ifdef CONFIG_SPL_BUILD |
| |
| struct altera_gen5_sdram_priv { |
| struct ram_info info; |
| }; |
| |
| struct altera_gen5_sdram_platdata { |
| struct socfpga_sdr *sdr; |
| }; |
| |
| struct sdram_prot_rule { |
| u32 sdram_start; /* SDRAM start address */ |
| u32 sdram_end; /* SDRAM end address */ |
| u32 rule; /* SDRAM protection rule number: 0-19 */ |
| int valid; /* Rule valid or not? 1 - valid, 0 not*/ |
| |
| u32 security; |
| u32 portmask; |
| u32 result; |
| u32 lo_prot_id; |
| u32 hi_prot_id; |
| }; |
| |
| static unsigned long sdram_calculate_size(struct socfpga_sdr_ctrl *sdr_ctrl); |
| |
| /** |
| * get_errata_rows() - Up the number of DRAM rows to cover entire address space |
| * @cfg: SDRAM controller configuration data |
| * |
| * SDRAM Failure happens when accessing non-existent memory. Artificially |
| * increase the number of rows so that the memory controller thinks it has |
| * 4GB of RAM. This function returns such amount of rows. |
| */ |
| static int get_errata_rows(const struct socfpga_sdram_config *cfg) |
| { |
| /* Define constant for 4G memory - used for SDRAM errata workaround */ |
| #define MEMSIZE_4G (4ULL * 1024ULL * 1024ULL * 1024ULL) |
| const unsigned long long memsize = MEMSIZE_4G; |
| const unsigned int cs = |
| ((cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB) + 1; |
| const unsigned int rows = |
| (cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB; |
| const unsigned int banks = |
| (cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB; |
| const unsigned int cols = |
| (cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB; |
| const unsigned int width = 8; |
| |
| unsigned long long newrows; |
| int bits, inewrowslog2; |
| |
| debug("workaround rows - memsize %lld\n", memsize); |
| debug("workaround rows - cs %d\n", cs); |
| debug("workaround rows - width %d\n", width); |
| debug("workaround rows - rows %d\n", rows); |
| debug("workaround rows - banks %d\n", banks); |
| debug("workaround rows - cols %d\n", cols); |
| |
| newrows = lldiv(memsize, cs * (width / 8)); |
| debug("rows workaround - term1 %lld\n", newrows); |
| |
| newrows = lldiv(newrows, (1 << banks) * (1 << cols)); |
| debug("rows workaround - term2 %lld\n", newrows); |
| |
| /* |
| * Compute the hamming weight - same as number of bits set. |
| * Need to see if result is ordinal power of 2 before |
| * attempting log2 of result. |
| */ |
| bits = generic_hweight32(newrows); |
| |
| debug("rows workaround - bits %d\n", bits); |
| |
| if (bits != 1) { |
| printf("SDRAM workaround failed, bits set %d\n", bits); |
| return rows; |
| } |
| |
| if (newrows > UINT_MAX) { |
| printf("SDRAM workaround rangecheck failed, %lld\n", newrows); |
| return rows; |
| } |
| |
| inewrowslog2 = __ilog2(newrows); |
| |
| debug("rows workaround - ilog2 %d, %lld\n", inewrowslog2, newrows); |
| |
| if (inewrowslog2 == -1) { |
| printf("SDRAM workaround failed, newrows %lld\n", newrows); |
| return rows; |
| } |
| |
| return inewrowslog2; |
| } |
| |
| /* SDRAM protection rules vary from 0-19, a total of 20 rules. */ |
| static void sdram_set_rule(struct socfpga_sdr_ctrl *sdr_ctrl, |
| struct sdram_prot_rule *prule) |
| { |
| u32 lo_addr_bits; |
| u32 hi_addr_bits; |
| int ruleno = prule->rule; |
| |
| /* Select the rule */ |
| writel(ruleno, &sdr_ctrl->prot_rule_rdwr); |
| |
| /* Obtain the address bits */ |
| lo_addr_bits = prule->sdram_start >> 20ULL; |
| hi_addr_bits = (prule->sdram_end - 1) >> 20ULL; |
| |
| debug("sdram set rule start %x, %d\n", lo_addr_bits, |
| prule->sdram_start); |
| debug("sdram set rule end %x, %d\n", hi_addr_bits, |
| prule->sdram_end); |
| |
| /* Set rule addresses */ |
| writel(lo_addr_bits | (hi_addr_bits << 12), &sdr_ctrl->prot_rule_addr); |
| |
| /* Set rule protection ids */ |
| writel(prule->lo_prot_id | (prule->hi_prot_id << 12), |
| &sdr_ctrl->prot_rule_id); |
| |
| /* Set the rule data */ |
| writel(prule->security | (prule->valid << 2) | |
| (prule->portmask << 3) | (prule->result << 13), |
| &sdr_ctrl->prot_rule_data); |
| |
| /* write the rule */ |
| writel(ruleno | (1 << 5), &sdr_ctrl->prot_rule_rdwr); |
| |
| /* Set rule number to 0 by default */ |
| writel(0, &sdr_ctrl->prot_rule_rdwr); |
| } |
| |
| static void sdram_get_rule(struct socfpga_sdr_ctrl *sdr_ctrl, |
| struct sdram_prot_rule *prule) |
| { |
| u32 addr; |
| u32 id; |
| u32 data; |
| int ruleno = prule->rule; |
| |
| /* Read the rule */ |
| writel(ruleno, &sdr_ctrl->prot_rule_rdwr); |
| writel(ruleno | (1 << 6), &sdr_ctrl->prot_rule_rdwr); |
| |
| /* Get the addresses */ |
| addr = readl(&sdr_ctrl->prot_rule_addr); |
| prule->sdram_start = (addr & 0xFFF) << 20; |
| prule->sdram_end = ((addr >> 12) & 0xFFF) << 20; |
| |
| /* Get the configured protection IDs */ |
| id = readl(&sdr_ctrl->prot_rule_id); |
| prule->lo_prot_id = id & 0xFFF; |
| prule->hi_prot_id = (id >> 12) & 0xFFF; |
| |
| /* Get protection data */ |
| data = readl(&sdr_ctrl->prot_rule_data); |
| |
| prule->security = data & 0x3; |
| prule->valid = (data >> 2) & 0x1; |
| prule->portmask = (data >> 3) & 0x3FF; |
| prule->result = (data >> 13) & 0x1; |
| } |
| |
| static void |
| sdram_set_protection_config(struct socfpga_sdr_ctrl *sdr_ctrl, |
| const u32 sdram_start, const u32 sdram_end) |
| { |
| struct sdram_prot_rule rule; |
| int rules; |
| |
| /* Start with accepting all SDRAM transaction */ |
| writel(0x0, &sdr_ctrl->protport_default); |
| |
| /* Clear all protection rules for warm boot case */ |
| memset(&rule, 0, sizeof(rule)); |
| |
| for (rules = 0; rules < 20; rules++) { |
| rule.rule = rules; |
| sdram_set_rule(sdr_ctrl, &rule); |
| } |
| |
| /* new rule: accept SDRAM */ |
| rule.sdram_start = sdram_start; |
| rule.sdram_end = sdram_end; |
| rule.lo_prot_id = 0x0; |
| rule.hi_prot_id = 0xFFF; |
| rule.portmask = 0x3FF; |
| rule.security = 0x3; |
| rule.result = 0; |
| rule.valid = 1; |
| rule.rule = 0; |
| |
| /* set new rule */ |
| sdram_set_rule(sdr_ctrl, &rule); |
| |
| /* default rule: reject everything */ |
| writel(0x3ff, &sdr_ctrl->protport_default); |
| } |
| |
| static void sdram_dump_protection_config(struct socfpga_sdr_ctrl *sdr_ctrl) |
| { |
| struct sdram_prot_rule rule; |
| int rules; |
| |
| debug("SDRAM Prot rule, default %x\n", |
| readl(&sdr_ctrl->protport_default)); |
| |
| for (rules = 0; rules < 20; rules++) { |
| rule.rule = rules; |
| sdram_get_rule(sdr_ctrl, &rule); |
| debug("Rule %d, rules ...\n", rules); |
| debug(" sdram start %x\n", rule.sdram_start); |
| debug(" sdram end %x\n", rule.sdram_end); |
| debug(" low prot id %d, hi prot id %d\n", |
| rule.lo_prot_id, |
| rule.hi_prot_id); |
| debug(" portmask %x\n", rule.portmask); |
| debug(" security %d\n", rule.security); |
| debug(" result %d\n", rule.result); |
| debug(" valid %d\n", rule.valid); |
| } |
| } |
| |
| /** |
| * sdram_write_verify() - write to register and verify the write. |
| * @addr: Register address |
| * @val: Value to be written and verified |
| * |
| * This function writes to a register, reads back the value and compares |
| * the result with the written value to check if the data match. |
| */ |
| static unsigned sdram_write_verify(const u32 *addr, const u32 val) |
| { |
| u32 rval; |
| |
| debug(" Write - Address 0x%p Data 0x%08x\n", addr, val); |
| writel(val, addr); |
| |
| debug(" Read and verify..."); |
| rval = readl(addr); |
| if (rval != val) { |
| debug("FAIL - Address 0x%p Expected 0x%08x Data 0x%08x\n", |
| addr, val, rval); |
| return -EINVAL; |
| } |
| |
| debug("correct!\n"); |
| return 0; |
| } |
| |
| /** |
| * sdr_get_ctrlcfg() - Get the value of DRAM CTRLCFG register |
| * @cfg: SDRAM controller configuration data |
| * |
| * Return the value of DRAM CTRLCFG register. |
| */ |
| static u32 sdr_get_ctrlcfg(const struct socfpga_sdram_config *cfg) |
| { |
| const u32 csbits = |
| ((cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB) + 1; |
| u32 addrorder = |
| (cfg->ctrl_cfg & SDR_CTRLGRP_CTRLCFG_ADDRORDER_MASK) >> |
| SDR_CTRLGRP_CTRLCFG_ADDRORDER_LSB; |
| |
| u32 ctrl_cfg = cfg->ctrl_cfg; |
| |
| /* |
| * SDRAM Failure When Accessing Non-Existent Memory |
| * Set the addrorder field of the SDRAM control register |
| * based on the CSBITs setting. |
| */ |
| if (csbits == 1) { |
| if (addrorder != 0) |
| debug("INFO: Changing address order to 0 (chip, row, bank, column)\n"); |
| addrorder = 0; |
| } else if (csbits == 2) { |
| if (addrorder != 2) |
| debug("INFO: Changing address order to 2 (row, chip, bank, column)\n"); |
| addrorder = 2; |
| } |
| |
| ctrl_cfg &= ~SDR_CTRLGRP_CTRLCFG_ADDRORDER_MASK; |
| ctrl_cfg |= addrorder << SDR_CTRLGRP_CTRLCFG_ADDRORDER_LSB; |
| |
| return ctrl_cfg; |
| } |
| |
| /** |
| * sdr_get_addr_rw() - Get the value of DRAM ADDRW register |
| * @cfg: SDRAM controller configuration data |
| * |
| * Return the value of DRAM ADDRW register. |
| */ |
| static u32 sdr_get_addr_rw(const struct socfpga_sdram_config *cfg) |
| { |
| /* |
| * SDRAM Failure When Accessing Non-Existent Memory |
| * Set SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB to |
| * log2(number of chip select bits). Since there's only |
| * 1 or 2 chip selects, log2(1) => 0, and log2(2) => 1, |
| * which is the same as "chip selects" - 1. |
| */ |
| const int rows = get_errata_rows(cfg); |
| u32 dram_addrw = cfg->dram_addrw & ~SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK; |
| |
| return dram_addrw | (rows << SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB); |
| } |
| |
| /** |
| * sdr_load_regs() - Load SDRAM controller registers |
| * @cfg: SDRAM controller configuration data |
| * |
| * This function loads the register values into the SDRAM controller block. |
| */ |
| static void sdr_load_regs(struct socfpga_sdr_ctrl *sdr_ctrl, |
| const struct socfpga_sdram_config *cfg) |
| { |
| const u32 ctrl_cfg = sdr_get_ctrlcfg(cfg); |
| const u32 dram_addrw = sdr_get_addr_rw(cfg); |
| |
| debug("\nConfiguring CTRLCFG\n"); |
| writel(ctrl_cfg, &sdr_ctrl->ctrl_cfg); |
| |
| debug("Configuring DRAMTIMING1\n"); |
| writel(cfg->dram_timing1, &sdr_ctrl->dram_timing1); |
| |
| debug("Configuring DRAMTIMING2\n"); |
| writel(cfg->dram_timing2, &sdr_ctrl->dram_timing2); |
| |
| debug("Configuring DRAMTIMING3\n"); |
| writel(cfg->dram_timing3, &sdr_ctrl->dram_timing3); |
| |
| debug("Configuring DRAMTIMING4\n"); |
| writel(cfg->dram_timing4, &sdr_ctrl->dram_timing4); |
| |
| debug("Configuring LOWPWRTIMING\n"); |
| writel(cfg->lowpwr_timing, &sdr_ctrl->lowpwr_timing); |
| |
| debug("Configuring DRAMADDRW\n"); |
| writel(dram_addrw, &sdr_ctrl->dram_addrw); |
| |
| debug("Configuring DRAMIFWIDTH\n"); |
| writel(cfg->dram_if_width, &sdr_ctrl->dram_if_width); |
| |
| debug("Configuring DRAMDEVWIDTH\n"); |
| writel(cfg->dram_dev_width, &sdr_ctrl->dram_dev_width); |
| |
| debug("Configuring LOWPWREQ\n"); |
| writel(cfg->lowpwr_eq, &sdr_ctrl->lowpwr_eq); |
| |
| debug("Configuring DRAMINTR\n"); |
| writel(cfg->dram_intr, &sdr_ctrl->dram_intr); |
| |
| debug("Configuring STATICCFG\n"); |
| writel(cfg->static_cfg, &sdr_ctrl->static_cfg); |
| |
| debug("Configuring CTRLWIDTH\n"); |
| writel(cfg->ctrl_width, &sdr_ctrl->ctrl_width); |
| |
| debug("Configuring PORTCFG\n"); |
| writel(cfg->port_cfg, &sdr_ctrl->port_cfg); |
| |
| debug("Configuring FIFOCFG\n"); |
| writel(cfg->fifo_cfg, &sdr_ctrl->fifo_cfg); |
| |
| debug("Configuring MPPRIORITY\n"); |
| writel(cfg->mp_priority, &sdr_ctrl->mp_priority); |
| |
| debug("Configuring MPWEIGHT_MPWEIGHT_0\n"); |
| writel(cfg->mp_weight0, &sdr_ctrl->mp_weight0); |
| writel(cfg->mp_weight1, &sdr_ctrl->mp_weight1); |
| writel(cfg->mp_weight2, &sdr_ctrl->mp_weight2); |
| writel(cfg->mp_weight3, &sdr_ctrl->mp_weight3); |
| |
| debug("Configuring MPPACING_MPPACING_0\n"); |
| writel(cfg->mp_pacing0, &sdr_ctrl->mp_pacing0); |
| writel(cfg->mp_pacing1, &sdr_ctrl->mp_pacing1); |
| writel(cfg->mp_pacing2, &sdr_ctrl->mp_pacing2); |
| writel(cfg->mp_pacing3, &sdr_ctrl->mp_pacing3); |
| |
| debug("Configuring MPTHRESHOLDRST_MPTHRESHOLDRST_0\n"); |
| writel(cfg->mp_threshold0, &sdr_ctrl->mp_threshold0); |
| writel(cfg->mp_threshold1, &sdr_ctrl->mp_threshold1); |
| writel(cfg->mp_threshold2, &sdr_ctrl->mp_threshold2); |
| |
| debug("Configuring PHYCTRL_PHYCTRL_0\n"); |
| writel(cfg->phy_ctrl0, &sdr_ctrl->phy_ctrl0); |
| |
| debug("Configuring CPORTWIDTH\n"); |
| writel(cfg->cport_width, &sdr_ctrl->cport_width); |
| |
| debug("Configuring CPORTWMAP\n"); |
| writel(cfg->cport_wmap, &sdr_ctrl->cport_wmap); |
| |
| debug("Configuring CPORTRMAP\n"); |
| writel(cfg->cport_rmap, &sdr_ctrl->cport_rmap); |
| |
| debug("Configuring RFIFOCMAP\n"); |
| writel(cfg->rfifo_cmap, &sdr_ctrl->rfifo_cmap); |
| |
| debug("Configuring WFIFOCMAP\n"); |
| writel(cfg->wfifo_cmap, &sdr_ctrl->wfifo_cmap); |
| |
| debug("Configuring CPORTRDWR\n"); |
| writel(cfg->cport_rdwr, &sdr_ctrl->cport_rdwr); |
| |
| debug("Configuring DRAMODT\n"); |
| writel(cfg->dram_odt, &sdr_ctrl->dram_odt); |
| |
| if (dram_is_ddr(3)) { |
| debug("Configuring EXTRATIME1\n"); |
| writel(cfg->extratime1, &sdr_ctrl->extratime1); |
| } |
| } |
| |
| /** |
| * sdram_mmr_init_full() - Function to initialize SDRAM MMR |
| * @sdr_phy_reg: Value of the PHY control register 0 |
| * |
| * Initialize the SDRAM MMR. |
| */ |
| int sdram_mmr_init_full(struct socfpga_sdr_ctrl *sdr_ctrl, |
| unsigned int sdr_phy_reg) |
| { |
| const struct socfpga_sdram_config *cfg = socfpga_get_sdram_config(); |
| const unsigned int rows = |
| (cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB; |
| int ret; |
| |
| writel(rows, |
| socfpga_get_sysmgr_addr() + SYSMGR_ISWGRP_HANDOFF_OFFSET(4)); |
| |
| sdr_load_regs(sdr_ctrl, cfg); |
| |
| /* saving this value to SYSMGR.ISWGRP.HANDOFF.FPGA2SDR */ |
| writel(cfg->fpgaport_rst, |
| socfpga_get_sysmgr_addr() + SYSMGR_ISWGRP_HANDOFF_OFFSET(3)); |
| |
| /* only enable if the FPGA is programmed */ |
| if (fpgamgr_test_fpga_ready()) { |
| ret = sdram_write_verify(&sdr_ctrl->fpgaport_rst, |
| cfg->fpgaport_rst); |
| if (ret) |
| return ret; |
| } |
| |
| /* Restore the SDR PHY Register if valid */ |
| if (sdr_phy_reg != 0xffffffff) |
| writel(sdr_phy_reg, &sdr_ctrl->phy_ctrl0); |
| |
| /* Final step - apply configuration changes */ |
| debug("Configuring STATICCFG\n"); |
| clrsetbits_le32(&sdr_ctrl->static_cfg, |
| SDR_CTRLGRP_STATICCFG_APPLYCFG_MASK, |
| 1 << SDR_CTRLGRP_STATICCFG_APPLYCFG_LSB); |
| |
| sdram_set_protection_config(sdr_ctrl, 0, |
| sdram_calculate_size(sdr_ctrl) - 1); |
| |
| sdram_dump_protection_config(sdr_ctrl); |
| |
| return 0; |
| } |
| |
| /** |
| * sdram_calculate_size() - Calculate SDRAM size |
| * |
| * Calculate SDRAM device size based on SDRAM controller parameters. |
| * Size is specified in bytes. |
| */ |
| static unsigned long sdram_calculate_size(struct socfpga_sdr_ctrl *sdr_ctrl) |
| { |
| unsigned long temp; |
| unsigned long row, bank, col, cs, width; |
| const struct socfpga_sdram_config *cfg = socfpga_get_sdram_config(); |
| const unsigned int csbits = |
| ((cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_CSBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_CSBITS_LSB) + 1; |
| const unsigned int rowbits = |
| (cfg->dram_addrw & SDR_CTRLGRP_DRAMADDRW_ROWBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_ROWBITS_LSB; |
| |
| temp = readl(&sdr_ctrl->dram_addrw); |
| col = (temp & SDR_CTRLGRP_DRAMADDRW_COLBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_COLBITS_LSB; |
| |
| /* |
| * SDRAM Failure When Accessing Non-Existent Memory |
| * Use ROWBITS from Quartus/QSys to calculate SDRAM size |
| * since the FB specifies we modify ROWBITs to work around SDRAM |
| * controller issue. |
| */ |
| row = readl(socfpga_get_sysmgr_addr() + |
| SYSMGR_ISWGRP_HANDOFF_OFFSET(4)); |
| if (row == 0) |
| row = rowbits; |
| /* |
| * If the stored handoff value for rows is greater than |
| * the field width in the sdr.dramaddrw register then |
| * something is very wrong. Revert to using the the #define |
| * value handed off by the SOCEDS tool chain instead of |
| * using a broken value. |
| */ |
| if (row > 31) |
| row = rowbits; |
| |
| bank = (temp & SDR_CTRLGRP_DRAMADDRW_BANKBITS_MASK) >> |
| SDR_CTRLGRP_DRAMADDRW_BANKBITS_LSB; |
| |
| /* |
| * SDRAM Failure When Accessing Non-Existent Memory |
| * Use CSBITs from Quartus/QSys to calculate SDRAM size |
| * since the FB specifies we modify CSBITs to work around SDRAM |
| * controller issue. |
| */ |
| cs = csbits; |
| |
| width = readl(&sdr_ctrl->dram_if_width); |
| |
| /* ECC would not be calculated as its not addressible */ |
| if (width == SDRAM_WIDTH_32BIT_WITH_ECC) |
| width = 32; |
| if (width == SDRAM_WIDTH_16BIT_WITH_ECC) |
| width = 16; |
| |
| /* calculate the SDRAM size base on this info */ |
| temp = 1 << (row + bank + col); |
| temp = temp * cs * (width / 8); |
| |
| debug("%s returns %ld\n", __func__, temp); |
| |
| return temp; |
| } |
| |
| static int altera_gen5_sdram_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct altera_gen5_sdram_platdata *plat = dev->platdata; |
| |
| plat->sdr = (struct socfpga_sdr *)devfdt_get_addr_index(dev, 0); |
| if (!plat->sdr) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int altera_gen5_sdram_probe(struct udevice *dev) |
| { |
| int ret; |
| unsigned long sdram_size; |
| struct altera_gen5_sdram_platdata *plat = dev->platdata; |
| struct altera_gen5_sdram_priv *priv = dev_get_priv(dev); |
| struct socfpga_sdr_ctrl *sdr_ctrl = &plat->sdr->sdr_ctrl; |
| struct reset_ctl_bulk resets; |
| |
| ret = reset_get_bulk(dev, &resets); |
| if (ret) { |
| dev_err(dev, "Can't get reset: %d\n", ret); |
| return -ENODEV; |
| } |
| reset_deassert_bulk(&resets); |
| |
| if (sdram_mmr_init_full(sdr_ctrl, 0xffffffff) != 0) { |
| puts("SDRAM init failed.\n"); |
| goto failed; |
| } |
| |
| debug("SDRAM: Calibrating PHY\n"); |
| /* SDRAM calibration */ |
| if (sdram_calibration_full(plat->sdr) == 0) { |
| puts("SDRAM calibration failed.\n"); |
| goto failed; |
| } |
| |
| sdram_size = sdram_calculate_size(sdr_ctrl); |
| debug("SDRAM: %ld MiB\n", sdram_size >> 20); |
| |
| /* Sanity check ensure correct SDRAM size specified */ |
| if (get_ram_size(0, sdram_size) != sdram_size) { |
| puts("SDRAM size check failed!\n"); |
| goto failed; |
| } |
| |
| priv->info.base = 0; |
| priv->info.size = sdram_size; |
| |
| return 0; |
| |
| failed: |
| reset_release_bulk(&resets); |
| return -ENODEV; |
| } |
| |
| static int altera_gen5_sdram_get_info(struct udevice *dev, |
| struct ram_info *info) |
| { |
| struct altera_gen5_sdram_priv *priv = dev_get_priv(dev); |
| |
| info->base = priv->info.base; |
| info->size = priv->info.size; |
| |
| return 0; |
| } |
| |
| static const struct ram_ops altera_gen5_sdram_ops = { |
| .get_info = altera_gen5_sdram_get_info, |
| }; |
| |
| static const struct udevice_id altera_gen5_sdram_ids[] = { |
| { .compatible = "altr,sdr-ctl" }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(altera_gen5_sdram) = { |
| .name = "altr_sdr_ctl", |
| .id = UCLASS_RAM, |
| .of_match = altera_gen5_sdram_ids, |
| .ops = &altera_gen5_sdram_ops, |
| .ofdata_to_platdata = altera_gen5_sdram_ofdata_to_platdata, |
| .platdata_auto_alloc_size = sizeof(struct altera_gen5_sdram_platdata), |
| .probe = altera_gen5_sdram_probe, |
| .priv_auto_alloc_size = sizeof(struct altera_gen5_sdram_priv), |
| }; |
| |
| #endif /* CONFIG_SPL_BUILD */ |