drivers/pinctrl/nxp/pinctrl-imx.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2016 Peng Fan <van.freenix@gmail.com>
  */

 #include <common.h>
 #include <malloc.h>
 #include <mapmem.h>
 #include <dm/device_compat.h>
 #include <dm/devres.h>
 #include <linux/bitops.h>
 #include <linux/io.h>
 #include <linux/err.h>
 #include <dm.h>
 #include <dm/pinctrl.h>

 #include "pinctrl-imx.h"

 DECLARE_GLOBAL_DATA_PTR;

 static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)
 {
 	struct imx_pinctrl_priv *priv = dev_get_priv(dev);
 	struct imx_pinctrl_soc_info *info = priv->info;
 	int node = dev_of_offset(config);
 	const struct fdt_property *prop;
 	u32 *pin_data;
 	int npins, size, pin_size;
 	int mux_reg, conf_reg, input_reg;
 	u32 input_val, mux_mode, config_val;
 	u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0;
 	int i, j = 0;

 	dev_dbg(dev, "%s: %s\n", __func__, config->name);

 	if (info->flags & IMX8_USE_SCU)
 		pin_size = SHARE_IMX8_PIN_SIZE;
 	else if (info->flags & SHARE_MUX_CONF_REG)
 		pin_size = SHARE_FSL_PIN_SIZE;
 	else
 		pin_size = FSL_PIN_SIZE;

 	prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size);
 	if (!prop) {
 		dev_err(dev, "No fsl,pins property in node %s\n", config->name);
 		return -EINVAL;
 	}

 	if (!size || size % pin_size) {
 		dev_err(dev, "Invalid fsl,pins property in node %s\n",
 			config->name);
 		return -EINVAL;
 	}

 	pin_data = devm_kzalloc(dev, size, 0);
 	if (!pin_data)
 		return -ENOMEM;

 	if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins",
 				 pin_data, size >> 2)) {
 		dev_err(dev, "Error reading pin data.\n");
 		devm_kfree(dev, pin_data);
 		return -EINVAL;
 	}

 	npins = size / pin_size;

 	if (info->flags & IMX8_USE_SCU) {
 		imx_pinctrl_scu_conf_pins(info, pin_data, npins);
 	} else {
 		/*
 		 * Refer to linux documentation for details:
 		 * Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
 		 */
 		for (i = 0; i < npins; i++) {
 			mux_reg = pin_data[j++];

 			if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
 				mux_reg = -1;

 			if (info->flags & SHARE_MUX_CONF_REG) {
 				conf_reg = mux_reg;
 			} else {
 				conf_reg = pin_data[j++];
 				if (!(info->flags & ZERO_OFFSET_VALID) &&
 				    !conf_reg)
 					conf_reg = -1;
 			}

 			if ((mux_reg == -1) || (conf_reg == -1)) {
 				dev_err(dev, "Error mux_reg or conf_reg\n");
 				devm_kfree(dev, pin_data);
 				return -EINVAL;
 			}

 			input_reg = pin_data[j++];
 			mux_mode = pin_data[j++];
 			input_val = pin_data[j++];
 			config_val = pin_data[j++];

 			dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, "
 				"input_reg 0x%x, mux_mode 0x%x, "
 				"input_val 0x%x, config_val 0x%x\n",
 				mux_reg, conf_reg, input_reg, mux_mode,
 				input_val, config_val);

 			if (config_val & IMX_PAD_SION)
 				mux_mode |= IOMUXC_CONFIG_SION;

 			config_val &= ~IMX_PAD_SION;

 			/* Set Mux */
 			if (info->flags & SHARE_MUX_CONF_REG) {
 				clrsetbits_le32(info->base + mux_reg,
 						info->mux_mask,
 						mux_mode << mux_shift);
 			} else {
 				writel(mux_mode, info->base + mux_reg);
 			}

 			dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n",
 				mux_reg, mux_mode);

 			/*
 			 * Set select input
 			 *
 			 * If the select input value begins with 0xff,
 			 * it's a quirky select input and the value should
 			 * be interpreted as below.
 			 *     31     23      15      7        0
 			 *     | 0xff | shift | width | select |
 			 * It's used to work around the problem that the
 			 * select input for some pin is not implemented in
 			 * the select input register but in some general
 			 * purpose register. We encode the select input
 			 * value, width and shift of the bit field into
 			 * input_val cell of pin function ID in device tree,
 			 * and then decode them here for setting up the select
 			 * input bits in general purpose register.
 			 */

 			if (input_val >> 24 == 0xff) {
 				u32 val = input_val;
 				u8 select = val & 0xff;
 				u8 width = (val >> 8) & 0xff;
 				u8 shift = (val >> 16) & 0xff;
 				u32 mask = ((1 << width) - 1) << shift;
 				/*
 				 * The input_reg[i] here is actually some
 				 * IOMUXC general purpose register, not
 				 * regular select input register.
 				 */
 				val = readl(info->base + input_reg);
 				val &= ~mask;
 				val |= select << shift;
 				writel(val, info->base + input_reg);
 			} else if (input_reg) {
 				/*
 				 * Regular select input register can never be
 				 * at offset 0, and we only print register
 				 * value for regular case.
 				 */
 				if (info->input_sel_base)
 					writel(input_val,
 					       info->input_sel_base +
 					       input_reg);
 				else
 					writel(input_val,
 					       info->base + input_reg);

 				dev_dbg(dev, "select_input: offset 0x%x val "
 					"0x%x\n", input_reg, input_val);
 			}

 			/* Set config */
 			if (!(config_val & IMX_NO_PAD_CTL)) {
 				if (info->flags & SHARE_MUX_CONF_REG) {
 					clrsetbits_le32(info->base + conf_reg,
 							~info->mux_mask,
 							config_val);
 				} else {
 					writel(config_val,
 					       info->base + conf_reg);
 				}

 				dev_dbg(dev, "write config: offset 0x%x val "
 					"0x%x\n", conf_reg, config_val);
 			}
 		}
 	}

 	devm_kfree(dev, pin_data);

 	return 0;
 }

 const struct pinctrl_ops imx_pinctrl_ops  = {
 	.set_state = imx_pinctrl_set_state,
 };

 int imx_pinctrl_probe(struct udevice *dev,
 		      struct imx_pinctrl_soc_info *info)
 {
 	struct imx_pinctrl_priv *priv = dev_get_priv(dev);
 	int node = dev_of_offset(dev), ret;
 	struct fdtdec_phandle_args arg;
 	fdt_addr_t addr;
 	fdt_size_t size;

 	if (!info) {
 		dev_err(dev, "wrong pinctrl info\n");
 		return -EINVAL;
 	}

 	priv->dev = dev;
 	priv->info = info;

 	if (info->flags & IMX8_USE_SCU)
 		return 0;

 	addr = devfdt_get_addr_size_index(dev, 0, &size);
 	if (addr == FDT_ADDR_T_NONE)
 		return -EINVAL;

 	info->base = map_sysmem(addr, size);
 	if (!info->base)
 		return -ENOMEM;
 	priv->info = info;

 	info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0);
 	/*
 	 * Refer to linux documentation for details:
 	 * Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
 	 */
 	if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) {
 		ret = fdtdec_parse_phandle_with_args(gd->fdt_blob,
 						     node, "fsl,input-sel",
 						     NULL, 0, 0, &arg);
 		if (ret) {
 			dev_err(dev, "iomuxc fsl,input-sel property not found\n");
 			return -EINVAL;
 		}

 		addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg",
 					    &size);
 		if (addr == FDT_ADDR_T_NONE)
 			return -EINVAL;

 		info->input_sel_base = map_sysmem(addr, size);
 		if (!info->input_sel_base)
 			return -ENOMEM;
 	}

 	dev_dbg(dev, "initialized IMX pinctrl driver\n");

 	return 0;
 }

 int imx_pinctrl_remove(struct udevice *dev)
 {
 	struct imx_pinctrl_priv *priv = dev_get_priv(dev);
 	struct imx_pinctrl_soc_info *info = priv->info;

 	if (info->flags & IMX8_USE_SCU)
 		return 0;

 	if (info->input_sel_base)
 		unmap_sysmem(info->input_sel_base);
 	if (info->base)
 		unmap_sysmem(info->base);

 	return 0;
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright (C) 2016 Peng Fan <van.freenix@gmail.com>
	*/

	#include <common.h>
	#include <malloc.h>
	#include <mapmem.h>
	#include <dm/device_compat.h>
	#include <dm/devres.h>
	#include <linux/bitops.h>
	#include <linux/io.h>
	#include <linux/err.h>
	#include <dm.h>
	#include <dm/pinctrl.h>

	#include "pinctrl-imx.h"

	DECLARE_GLOBAL_DATA_PTR;

	static int imx_pinctrl_set_state(struct udevice dev, struct udevice config)
	{
	struct imx_pinctrl_priv *priv = dev_get_priv(dev);
	struct imx_pinctrl_soc_info *info = priv->info;
	int node = dev_of_offset(config);
	const struct fdt_property *prop;
	u32 *pin_data;
	int npins, size, pin_size;
	int mux_reg, conf_reg, input_reg;
	u32 input_val, mux_mode, config_val;
	u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0;
	int i, j = 0;

	dev_dbg(dev, "%s: %s\n", __func__, config->name);

	if (info->flags & IMX8_USE_SCU)
	pin_size = SHARE_IMX8_PIN_SIZE;
	else if (info->flags & SHARE_MUX_CONF_REG)
	pin_size = SHARE_FSL_PIN_SIZE;
	else
	pin_size = FSL_PIN_SIZE;

	prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size);
	if (!prop) {
	dev_err(dev, "No fsl,pins property in node %s\n", config->name);
	return -EINVAL;
	}

	if (!size \|\| size % pin_size) {
	dev_err(dev, "Invalid fsl,pins property in node %s\n",
	config->name);
	return -EINVAL;
	}

	pin_data = devm_kzalloc(dev, size, 0);
	if (!pin_data)
	return -ENOMEM;

	if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins",
	pin_data, size >> 2)) {
	dev_err(dev, "Error reading pin data.\n");
	devm_kfree(dev, pin_data);
	return -EINVAL;
	}

	npins = size / pin_size;

	if (info->flags & IMX8_USE_SCU) {
	imx_pinctrl_scu_conf_pins(info, pin_data, npins);
	} else {
	/*
	* Refer to linux documentation for details:
	* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
	*/
	for (i = 0; i < npins; i++) {
	mux_reg = pin_data[j++];

	if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
	mux_reg = -1;

	if (info->flags & SHARE_MUX_CONF_REG) {
	conf_reg = mux_reg;
	} else {
	conf_reg = pin_data[j++];
	if (!(info->flags & ZERO_OFFSET_VALID) &&
	!conf_reg)
	conf_reg = -1;
	}

	if ((mux_reg == -1) \|\| (conf_reg == -1)) {
	dev_err(dev, "Error mux_reg or conf_reg\n");
	devm_kfree(dev, pin_data);
	return -EINVAL;
	}

	input_reg = pin_data[j++];
	mux_mode = pin_data[j++];
	input_val = pin_data[j++];
	config_val = pin_data[j++];

	dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, "
	"input_reg 0x%x, mux_mode 0x%x, "
	"input_val 0x%x, config_val 0x%x\n",
	mux_reg, conf_reg, input_reg, mux_mode,
	input_val, config_val);

	if (config_val & IMX_PAD_SION)
	mux_mode \|= IOMUXC_CONFIG_SION;

	config_val &= ~IMX_PAD_SION;

	/* Set Mux */
	if (info->flags & SHARE_MUX_CONF_REG) {
	clrsetbits_le32(info->base + mux_reg,
	info->mux_mask,
	mux_mode << mux_shift);
	} else {
	writel(mux_mode, info->base + mux_reg);
	}

	dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n",
	mux_reg, mux_mode);

	/*
	* Set select input
	*
	* If the select input value begins with 0xff,
	* it's a quirky select input and the value should
	* be interpreted as below.
	* 31 23 15 7 0
	* \| 0xff \| shift \| width \| select \|
	* It's used to work around the problem that the
	* select input for some pin is not implemented in
	* the select input register but in some general
	* purpose register. We encode the select input
	* value, width and shift of the bit field into
	* input_val cell of pin function ID in device tree,
	* and then decode them here for setting up the select
	* input bits in general purpose register.
	*/

	if (input_val >> 24 == 0xff) {
	u32 val = input_val;
	u8 select = val & 0xff;
	u8 width = (val >> 8) & 0xff;
	u8 shift = (val >> 16) & 0xff;
	u32 mask = ((1 << width) - 1) << shift;
	/*
	* The input_reg[i] here is actually some
	* IOMUXC general purpose register, not
	* regular select input register.
	*/
	val = readl(info->base + input_reg);
	val &= ~mask;
	val \|= select << shift;
	writel(val, info->base + input_reg);
	} else if (input_reg) {
	/*
	* Regular select input register can never be
	* at offset 0, and we only print register
	* value for regular case.
	*/
	if (info->input_sel_base)
	writel(input_val,
	info->input_sel_base +
	input_reg);
	else
	writel(input_val,
	info->base + input_reg);

	dev_dbg(dev, "select_input: offset 0x%x val "
	"0x%x\n", input_reg, input_val);
	}

	/* Set config */
	if (!(config_val & IMX_NO_PAD_CTL)) {
	if (info->flags & SHARE_MUX_CONF_REG) {
	clrsetbits_le32(info->base + conf_reg,
	~info->mux_mask,
	config_val);
	} else {
	writel(config_val,
	info->base + conf_reg);
	}

	dev_dbg(dev, "write config: offset 0x%x val "
	"0x%x\n", conf_reg, config_val);
	}
	}
	}

	devm_kfree(dev, pin_data);

	return 0;
	}

	const struct pinctrl_ops imx_pinctrl_ops = {
	.set_state = imx_pinctrl_set_state,
	};

	int imx_pinctrl_probe(struct udevice *dev,
	struct imx_pinctrl_soc_info *info)
	{
	struct imx_pinctrl_priv *priv = dev_get_priv(dev);
	int node = dev_of_offset(dev), ret;
	struct fdtdec_phandle_args arg;
	fdt_addr_t addr;
	fdt_size_t size;

	if (!info) {
	dev_err(dev, "wrong pinctrl info\n");
	return -EINVAL;
	}

	priv->dev = dev;
	priv->info = info;

	if (info->flags & IMX8_USE_SCU)
	return 0;

	addr = devfdt_get_addr_size_index(dev, 0, &size);
	if (addr == FDT_ADDR_T_NONE)
	return -EINVAL;

	info->base = map_sysmem(addr, size);
	if (!info->base)
	return -ENOMEM;
	priv->info = info;

	info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0);
	/*
	* Refer to linux documentation for details:
	* Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
	*/
	if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) {
	ret = fdtdec_parse_phandle_with_args(gd->fdt_blob,
	node, "fsl,input-sel",
	NULL, 0, 0, &arg);
	if (ret) {
	dev_err(dev, "iomuxc fsl,input-sel property not found\n");
	return -EINVAL;
	}

	addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg",
	&size);
	if (addr == FDT_ADDR_T_NONE)
	return -EINVAL;

	info->input_sel_base = map_sysmem(addr, size);
	if (!info->input_sel_base)
	return -ENOMEM;
	}

	dev_dbg(dev, "initialized IMX pinctrl driver\n");

	return 0;
	}

	int imx_pinctrl_remove(struct udevice *dev)
	{
	struct imx_pinctrl_priv *priv = dev_get_priv(dev);
	struct imx_pinctrl_soc_info *info = priv->info;

	if (info->flags & IMX8_USE_SCU)
	return 0;

	if (info->input_sel_base)
	unmap_sysmem(info->input_sel_base);
	if (info->base)
	unmap_sysmem(info->base);

	return 0;
	}