| /* |
| * Copyright (C) 2001, 2002 ETC s.r.o. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA |
| * 02111-1307, USA. |
| * |
| * Written by Marcel Telka <marcel@telka.sk>, 2001, 2002. |
| * Changes for U-Boot Peter Figuli <peposh@etc.sk>, 2003. |
| * |
| * This file is taken from OpenWinCE project hosted by SourceForge.net |
| * |
| * Documentation: |
| * [1] Intel Corporation, "Intel PXA250 and PXA210 Application Processors |
| * Developer's Manual", February 2002, Order Number: 278522-001 |
| * [2] Samsung Electronics, "8Mx16 SDRAM 54CSP K4S281633D-RL/N/P", |
| * Revision 1.0, February 2002 |
| * [3] Samsung Electronics, "16Mx16 SDRAM 54CSP K4S561633C-RL(N)", |
| * Revision 1.0, February 2002 |
| * |
| */ |
| |
| #include <config.h> |
| #include <version.h> |
| #include <asm/arch/pxa-regs.h> |
| |
| .globl memsetup |
| memsetup: |
| |
| mov r10, lr |
| |
| /* setup memory - see 6.12 in [1] |
| * Step 1 - wait 200 us |
| */ |
| mov r0,#0x2700 /* wait 200 us @ 99.5 MHz */ |
| 1: subs r0, r0, #1 |
| bne 1b |
| /* TODO: complete step 1 for Synchronous Static memory*/ |
| |
| ldr r0, =0x48000000 /* MC_BASE */ |
| |
| |
| /* step 1.a - setup MSCx |
| */ |
| ldr r1, =0x000012B3 /* MSC0_RRR0(1) | MSC0_RDN0(2) | MSC0_RDF0(11) | MSC0_RT0(3) */ |
| str r1, [r0, #0x8] /* MSC0_OFFSET */ |
| |
| /* step 1.c - clear MDREFR:K1FREE, set MDREFR:DRI |
| * see AUTO REFRESH chapter in section D. in [2] and in [3] |
| * DRI = (64ms / 4096) * 99.53MHz / 32 = 48 for K4S281633 |
| * DRI = (64ms / 8192) * 99.52MHz / 32 = 24 for K4S561633 |
| * TODO: complete for Synchronous Static memory |
| */ |
| ldr r1, [r0, #4] /* MDREFR_OFFSET */ |
| ldr r2, =0x01000FFF /* MDREFR_K1FREE | MDREFR_DRI_MASK */ |
| bic r1, r1, r2 |
| #if defined( WEP_SDRAM_K4S281633 ) |
| orr r1, r1, #48 /* MDREFR_DRI(48) */ |
| #elif defined( WEP_SDRAM_K4S561633 ) |
| orr r1, r1, #24 /* MDREFR_DRI(24) */ |
| #else |
| #error SDRAM chip is not defined |
| #endif |
| |
| str r1, [r0, #4] /* MDREFR_OFFSET */ |
| |
| /* Step 2 - only for Synchronous Static memory (TODO) |
| * |
| * Step 3 - same as step 4 |
| * |
| * Step 4 |
| * |
| * Step 4.a - set MDREFR:K1RUN, clear MDREFR:K1DB2 |
| */ |
| orr r1, r1, #0x00010000 /* MDREFR_K1RUN */ |
| bic r1, r1, #0x00020000 /* MDREFR_K1DB2 */ |
| str r1, [r0, #4] /* MDREFR_OFFSET */ |
| |
| /* Step 4.b - clear MDREFR:SLFRSH */ |
| bic r1, r1, #0x00400000 /* MDREFR_SLFRSH */ |
| str r1, [r0, #4] /* MDREFR_OFFSET */ |
| |
| /* Step 4.c - set MDREFR:E1PIN */ |
| orr r1, r1, #0x00008000 /* MDREFR_E1PIN */ |
| str r1, [r0, #4] /* MDREFR_OFFSET */ |
| |
| /* Step 4.d - automatically done |
| * |
| * Steps 4.e and 4.f - configure SDRAM |
| */ |
| #if defined( WEP_SDRAM_K4S281633 ) |
| ldr r1, =0x00000AA8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(1) | MDCNFG_DNB0 */ |
| #elif defined( WEP_SDRAM_K4S561633 ) |
| ldr r1, =0x00000AC8 /* MDCNFG_DTC0(2) | MDCNFG_DLATCH0 | MDCNFG_DCAC0(1) | MDCNFG_DRAC0(2) | MDCNFG_DNB0 */ |
| #else |
| #error SDRAM chip is not defined |
| #endif |
| str r1, [r0, #0] /* MDCNFG_OFFSET */ |
| |
| /* Step 5 - wait at least 200 us for SDRAM |
| * see section B. in [2] |
| */ |
| mov r2,#0x2700 /* wait 200 us @ 99.5 MHz */ |
| 1: subs r2, r2, #1 |
| bne 1b |
| |
| /* Step 6 - after reset dcache is disabled, so automatically done |
| * |
| * Step 7 - eight refresh cycles |
| */ |
| mov r2, #0xA0000000 |
| ldr r3, [r2] |
| ldr r3, [r2] |
| ldr r3, [r2] |
| ldr r3, [r2] |
| ldr r3, [r2] |
| ldr r3, [r2] |
| ldr r3, [r2] |
| ldr r3, [r2] |
| |
| /* Step 8 - we don't need dcache now |
| * |
| * Step 9 - enable SDRAM partition 0 |
| */ |
| orr r1, r1, #1 /* MDCNFG_DE0 */ |
| str r1, [r0, #0] /* MDCNFG_OFFSET */ |
| |
| /* Step 10 - write MDMRS */ |
| mov r1, #0 |
| str r1, [r0, #0x40] /* MDMRS_OFFSET */ |
| |
| /* Step 11 - optional (TODO) */ |
| |
| mov pc,r10 |