blob: 6fe5f2ce6543cd04b76cfdd1c9671d2f10b2e496 [file] [log] [blame]
/*
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _TEGRA_COMMON_H_
#define _TEGRA_COMMON_H_
#include <linux/sizes.h>
#include <linux/stringify.h>
/*
* High Level Configuration Options
*/
#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
#include <asm/arch/tegra.h> /* get chip and board defs */
/* Use the Tegra US timer on ARMv7, but the architected timer on ARMv8. */
#ifndef CONFIG_ARM64
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
#endif
/*
* Display CPU and Board information
*/
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
/* Environment */
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
/*
* Size of malloc() pool
*/
#ifdef CONFIG_DFU_MMC
#define CONFIG_SYS_MALLOC_LEN ((4 << 20) + \
CONFIG_SYS_DFU_DATA_BUF_SIZE)
#else
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
#endif
#ifndef CONFIG_ARM64
#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */
#endif
/*
* NS16550 Configuration
*/
#define CONFIG_TEGRA_SERIAL
#define CONFIG_SYS_NS16550
/*
* Common HW configuration.
* If this varies between SoCs later, move to tegraNN-common.h
* Note: This is number of devices, not max device ID.
*/
#define CONFIG_SYS_MMC_MAX_DEVICE 4
/*
* select serial console configuration
*/
#define CONFIG_CONS_INDEX 1
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
/* turn on command-line edit/hist/auto */
#define CONFIG_COMMAND_HISTORY
/* turn on commonly used storage-related commands */
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SYS_STDIO_DEREGISTER
#endif
/*
* Increasing the size of the IO buffer as default nfsargs size is more
* than 256 and so it is not possible to edit it
*/
#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
#define CONFIG_SYS_MEMTEST_START (NV_PA_SDRC_CS0 + 0x600000)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
#ifndef CONFIG_ARM64
#ifndef CONFIG_SPL_BUILD
#define CONFIG_USE_ARCH_MEMCPY
#endif
#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 NV_PA_SDRC_CS0
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_TEGRA_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_CMD_ENTERRCM
/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SIMPLE
#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_TEXT_BASE - \
CONFIG_SPL_TEXT_BASE)
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
/* Misc utility code */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CRC32_VERIFY
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>
#endif
#endif /* _TEGRA_COMMON_H_ */