| /*----------------------------------------------------------------------------+ |
| | |
| | This source code has been made available to you by IBM on an AS-IS |
| | basis. Anyone receiving this source is licensed under IBM |
| | copyrights to use it in any way he or she deems fit, including |
| | copying it, modifying it, compiling it, and redistributing it either |
| | with or without modifications. No license under IBM patents or |
| | patent applications is to be implied by the copyright license. |
| | |
| | Any user of this software should understand that IBM cannot provide |
| | technical support for this software and will not be responsible for |
| | any consequences resulting from the use of this software. |
| | |
| | Any person who transfers this source code or any derivative work |
| | must include the IBM copyright notice, this paragraph, and the |
| | preceding two paragraphs in the transferred software. |
| | |
| | COPYRIGHT I B M CORPORATION 1999 |
| | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M |
| +----------------------------------------------------------------------------*/ |
| |
| #ifndef __PPC405_H__ |
| #define __PPC405_H__ |
| |
| /*--------------------------------------------------------------------- */ |
| /* Special Purpose Registers */ |
| /*--------------------------------------------------------------------- */ |
| #define srr2 0x3de /* save/restore register 2 */ |
| #define srr3 0x3df /* save/restore register 3 */ |
| #define dbsr 0x3f0 /* debug status register */ |
| #define dbcr0 0x3f2 /* debug control register 0 */ |
| #define dbcr1 0x3bd /* debug control register 1 */ |
| #define iac1 0x3f4 /* instruction address comparator 1 */ |
| #define iac2 0x3f5 /* instruction address comparator 2 */ |
| #define iac3 0x3b4 /* instruction address comparator 3 */ |
| #define iac4 0x3b5 /* instruction address comparator 4 */ |
| #define dac1 0x3f6 /* data address comparator 1 */ |
| #define dac2 0x3f7 /* data address comparator 2 */ |
| #define dccr 0x3fa /* data cache control register */ |
| #define iccr 0x3fb /* instruction cache control register */ |
| #define esr 0x3d4 /* execption syndrome register */ |
| #define dear 0x3d5 /* data exeption address register */ |
| #define evpr 0x3d6 /* exeption vector prefix register */ |
| #define tsr 0x3d8 /* timer status register */ |
| #define tcr 0x3da /* timer control register */ |
| #define pit 0x3db /* programmable interval timer */ |
| #define sgr 0x3b9 /* storage guarded reg */ |
| #define dcwr 0x3ba /* data cache write-thru reg*/ |
| #define sler 0x3bb /* storage little-endian reg */ |
| #define cdbcr 0x3d7 /* cache debug cntrl reg */ |
| #define icdbdr 0x3d3 /* instr cache dbug data reg*/ |
| #define ccr0 0x3b3 /* core configuration register */ |
| #define dvc1 0x3b6 /* data value compare register 1 */ |
| #define dvc2 0x3b7 /* data value compare register 2 */ |
| #define pid 0x3b1 /* process ID */ |
| #define su0r 0x3bc /* storage user-defined register 0 */ |
| #define zpr 0x3b0 /* zone protection regsiter */ |
| |
| #define tbl 0x11c /* time base lower - privileged write */ |
| #define tbu 0x11d /* time base upper - privileged write */ |
| |
| #define sprg4r 0x104 /* Special purpose general 4 - read only */ |
| #define sprg5r 0x105 /* Special purpose general 5 - read only */ |
| #define sprg6r 0x106 /* Special purpose general 6 - read only */ |
| #define sprg7r 0x107 /* Special purpose general 7 - read only */ |
| #define sprg4w 0x114 /* Special purpose general 4 - write only */ |
| #define sprg5w 0x115 /* Special purpose general 5 - write only */ |
| #define sprg6w 0x116 /* Special purpose general 6 - write only */ |
| #define sprg7w 0x117 /* Special purpose general 7 - write only */ |
| |
| /****************************************************************************** |
| * Special for PPC405GP |
| ******************************************************************************/ |
| |
| /****************************************************************************** |
| * DMA |
| ******************************************************************************/ |
| #define DMA_DCR_BASE 0x100 |
| #define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */ |
| #define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */ |
| #define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */ |
| #define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */ |
| #define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */ |
| #define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */ |
| #define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */ |
| #define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */ |
| #define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */ |
| #define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */ |
| #define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */ |
| #define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */ |
| #define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */ |
| #define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */ |
| #define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */ |
| #define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */ |
| #define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */ |
| #define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */ |
| #define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */ |
| #define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */ |
| #define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */ |
| #define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ |
| #define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */ |
| |
| /****************************************************************************** |
| * Universal interrupt controller |
| ******************************************************************************/ |
| #define UIC_DCR_BASE 0xc0 |
| #define uicsr (UIC_DCR_BASE+0x0) /* UIC status */ |
| #define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */ |
| #define uicer (UIC_DCR_BASE+0x2) /* UIC enable */ |
| #define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */ |
| #define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */ |
| #define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */ |
| #define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */ |
| #define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */ |
| #define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */ |
| |
| /*-----------------------------------------------------------------------------+ |
| | Universal interrupt controller interrupts |
| +-----------------------------------------------------------------------------*/ |
| #define UIC_UART0 0x80000000 /* UART 0 */ |
| #define UIC_UART1 0x40000000 /* UART 1 */ |
| #define UIC_IIC 0x20000000 /* IIC */ |
| #define UIC_EXT_MAST 0x10000000 /* External Master */ |
| #define UIC_PCI 0x08000000 /* PCI write to command reg */ |
| #define UIC_DMA0 0x04000000 /* DMA chan. 0 */ |
| #define UIC_DMA1 0x02000000 /* DMA chan. 1 */ |
| #define UIC_DMA2 0x01000000 /* DMA chan. 2 */ |
| #define UIC_DMA3 0x00800000 /* DMA chan. 3 */ |
| #define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */ |
| #define UIC_MAL_SERR 0x00200000 /* MAL SERR */ |
| #define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */ |
| #define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */ |
| #define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */ |
| #define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */ |
| #define UIC_ENET 0x00010000 /* Ethernet */ |
| #define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */ |
| #define UIC_ECC_CE 0x00004000 /* ECC Correctable Error */ |
| #define UIC_PCI_PM 0x00002000 /* PCI Power Management */ |
| #define UIC_EXT0 0x00000040 /* External interrupt 0 */ |
| #define UIC_EXT1 0x00000020 /* External interrupt 1 */ |
| #define UIC_EXT2 0x00000010 /* External interrupt 2 */ |
| #define UIC_EXT3 0x00000008 /* External interrupt 3 */ |
| #define UIC_EXT4 0x00000004 /* External interrupt 4 */ |
| #define UIC_EXT5 0x00000002 /* External interrupt 5 */ |
| #define UIC_EXT6 0x00000001 /* External interrupt 6 */ |
| |
| /****************************************************************************** |
| * SDRAM Controller |
| ******************************************************************************/ |
| #define SDRAM_DCR_BASE 0x10 |
| #define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */ |
| #define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */ |
| /* values for memcfga register - indirect addressing of these regs */ |
| #define mem_besra 0x00 /* bus error syndrome reg a */ |
| #define mem_besrsa 0x04 /* bus error syndrome reg set a */ |
| #define mem_besrb 0x08 /* bus error syndrome reg b */ |
| #define mem_besrsb 0x0c /* bus error syndrome reg set b */ |
| #define mem_bear 0x10 /* bus error address reg */ |
| #define mem_mcopt1 0x20 /* memory controller options 1 */ |
| #define mem_rtr 0x30 /* refresh timer reg */ |
| #define mem_pmit 0x34 /* power management idle timer */ |
| #define mem_mb0cf 0x40 /* memory bank 0 configuration */ |
| #define mem_mb1cf 0x44 /* memory bank 1 configuration */ |
| #define mem_mb2cf 0x48 /* memory bank 2 configuration */ |
| #define mem_mb3cf 0x4c /* memory bank 3 configuration */ |
| #define mem_sdtr1 0x80 /* timing reg 1 */ |
| #define mem_ecccf 0x94 /* ECC configuration */ |
| #define mem_eccerr 0x98 /* ECC error status */ |
| |
| /****************************************************************************** |
| * Decompression Controller |
| ******************************************************************************/ |
| #define DECOMP_DCR_BASE 0x14 |
| #define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */ |
| #define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */ |
| /* values for kiar register - indirect addressing of these regs */ |
| #define kitor0 0x00 /* index table origin register 0 */ |
| #define kitor1 0x01 /* index table origin register 1 */ |
| #define kitor2 0x02 /* index table origin register 2 */ |
| #define kitor3 0x03 /* index table origin register 3 */ |
| #define kaddr0 0x04 /* address decode definition regsiter 0 */ |
| #define kaddr1 0x05 /* address decode definition regsiter 1 */ |
| #define kconf 0x40 /* decompression core config register */ |
| #define kid 0x41 /* decompression core ID register */ |
| #define kver 0x42 /* decompression core version # reg */ |
| #define kpear 0x50 /* bus error addr reg (PLB addr) */ |
| #define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/ |
| #define kesr0 0x52 /* bus error status reg 0 (R/clear) */ |
| #define kesr0s 0x53 /* bus error status reg 0 (set) */ |
| /* There are 0x400 of the following registers, from krom0 to krom3ff*/ |
| /* Only the first one is given here. */ |
| #define krom0 0x400 /* SRAM/ROM read/write */ |
| |
| /****************************************************************************** |
| * Power Management |
| ******************************************************************************/ |
| #define POWERMAN_DCR_BASE 0xb8 |
| #define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */ |
| #define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */ |
| #define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */ |
| |
| /****************************************************************************** |
| * Extrnal Bus Controller |
| ******************************************************************************/ |
| #define EBC_DCR_BASE 0x12 |
| #define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */ |
| #define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */ |
| /* values for ebccfga register - indirect addressing of these regs */ |
| #define pb0cr 0x00 /* periph bank 0 config reg */ |
| #define pb1cr 0x01 /* periph bank 1 config reg */ |
| #define pb2cr 0x02 /* periph bank 2 config reg */ |
| #define pb3cr 0x03 /* periph bank 3 config reg */ |
| #define pb4cr 0x04 /* periph bank 4 config reg */ |
| #define pb5cr 0x05 /* periph bank 5 config reg */ |
| #define pb6cr 0x06 /* periph bank 6 config reg */ |
| #define pb7cr 0x07 /* periph bank 7 config reg */ |
| #define pb0ap 0x10 /* periph bank 0 access parameters */ |
| #define pb1ap 0x11 /* periph bank 1 access parameters */ |
| #define pb2ap 0x12 /* periph bank 2 access parameters */ |
| #define pb3ap 0x13 /* periph bank 3 access parameters */ |
| #define pb4ap 0x14 /* periph bank 4 access parameters */ |
| #define pb5ap 0x15 /* periph bank 5 access parameters */ |
| #define pb6ap 0x16 /* periph bank 6 access parameters */ |
| #define pb7ap 0x17 /* periph bank 7 access parameters */ |
| #define pbear 0x20 /* periph bus error addr reg */ |
| #define pbesr0 0x21 /* periph bus error status reg 0 */ |
| #define pbesr1 0x22 /* periph bus error status reg 1 */ |
| #define epcr 0x23 /* external periph control reg */ |
| |
| /****************************************************************************** |
| * Control |
| ******************************************************************************/ |
| #define CNTRL_DCR_BASE 0x0b0 |
| #define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */ |
| #define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */ |
| #define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */ |
| #define reset (CNTRL_DCR_BASE+0x3) /* reset register */ |
| #define strap (CNTRL_DCR_BASE+0x4) /* strap register */ |
| #define ecr (0xAA) /* edge conditioning register (405GPr) */ |
| |
| /* Bit definitions */ |
| #define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ |
| #define PLLMR_FWD_DIV_BYPASS 0xE0000000 |
| #define PLLMR_FWD_DIV_3 0xA0000000 |
| #define PLLMR_FWD_DIV_4 0x80000000 |
| #define PLLMR_FWD_DIV_6 0x40000000 |
| |
| #define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ |
| #define PLLMR_FB_DIV_1 0x02000000 |
| #define PLLMR_FB_DIV_2 0x04000000 |
| #define PLLMR_FB_DIV_3 0x06000000 |
| #define PLLMR_FB_DIV_4 0x08000000 |
| |
| #define PLLMR_TUNING_MASK 0x01F80000 |
| |
| #define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ |
| #define PLLMR_CPU_PLB_DIV_1 0x00000000 |
| #define PLLMR_CPU_PLB_DIV_2 0x00020000 |
| #define PLLMR_CPU_PLB_DIV_3 0x00040000 |
| #define PLLMR_CPU_PLB_DIV_4 0x00060000 |
| |
| #define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ |
| #define PLLMR_OPB_PLB_DIV_1 0x00000000 |
| #define PLLMR_OPB_PLB_DIV_2 0x00008000 |
| #define PLLMR_OPB_PLB_DIV_3 0x00010000 |
| #define PLLMR_OPB_PLB_DIV_4 0x00018000 |
| |
| #define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ |
| #define PLLMR_PCI_PLB_DIV_1 0x00000000 |
| #define PLLMR_PCI_PLB_DIV_2 0x00002000 |
| #define PLLMR_PCI_PLB_DIV_3 0x00004000 |
| #define PLLMR_PCI_PLB_DIV_4 0x00006000 |
| |
| #define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ |
| #define PLLMR_EXB_PLB_DIV_2 0x00000000 |
| #define PLLMR_EXB_PLB_DIV_3 0x00000800 |
| #define PLLMR_EXB_PLB_DIV_4 0x00001000 |
| #define PLLMR_EXB_PLB_DIV_5 0x00001800 |
| |
| /* definitions for PPC405GPr (new mode strapping) */ |
| #define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ |
| |
| #define PSR_PLL_FWD_MASK 0xC0000000 |
| #define PSR_PLL_FDBACK_MASK 0x30000000 |
| #define PSR_PLL_TUNING_MASK 0x0E000000 |
| #define PSR_PLB_CPU_MASK 0x01800000 |
| #define PSR_OPB_PLB_MASK 0x00600000 |
| #define PSR_PCI_PLB_MASK 0x00180000 |
| #define PSR_EB_PLB_MASK 0x00060000 |
| #define PSR_ROM_WIDTH_MASK 0x00018000 |
| #define PSR_ROM_LOC 0x00004000 |
| #define PSR_PCI_ASYNC_EN 0x00001000 |
| #define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ |
| #define PSR_PCI_ARBIT_EN 0x00000400 |
| #define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ |
| |
| /* |
| * PLL Voltage Controlled Oscillator (VCO) definitions |
| * Maximum and minimum values (in MHz) for correct PLL operation. |
| */ |
| #define VCO_MIN 400 |
| #define VCO_MAX 800 |
| |
| /****************************************************************************** |
| * Memory Access Layer |
| ******************************************************************************/ |
| #define MAL_DCR_BASE 0x180 |
| #define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */ |
| #define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */ |
| #define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */ |
| #define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */ |
| #define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */ |
| #define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */ |
| #define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */ |
| #define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */ |
| #define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */ |
| #define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */ |
| #define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */ |
| #define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */ |
| #define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */ |
| #define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */ |
| #define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */ |
| #define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */ |
| |
| /*----------------------------------------------------------------------------- |
| | IIC Register Offsets |
| '----------------------------------------------------------------------------*/ |
| #define IICMDBUF 0x00 |
| #define IICSDBUF 0x02 |
| #define IICLMADR 0x04 |
| #define IICHMADR 0x05 |
| #define IICCNTL 0x06 |
| #define IICMDCNTL 0x07 |
| #define IICSTS 0x08 |
| #define IICEXTSTS 0x09 |
| #define IICLSADR 0x0A |
| #define IICHSADR 0x0B |
| #define IICCLKDIV 0x0C |
| #define IICINTRMSK 0x0D |
| #define IICXFRCNT 0x0E |
| #define IICXTCNTLSS 0x0F |
| #define IICDIRECTCNTL 0x10 |
| |
| /*----------------------------------------------------------------------------- |
| | UART Register Offsets |
| '----------------------------------------------------------------------------*/ |
| #define DATA_REG 0x00 |
| #define DL_LSB 0x00 |
| #define DL_MSB 0x01 |
| #define INT_ENABLE 0x01 |
| #define FIFO_CONTROL 0x02 |
| #define LINE_CONTROL 0x03 |
| #define MODEM_CONTROL 0x04 |
| #define LINE_STATUS 0x05 |
| #define MODEM_STATUS 0x06 |
| #define SCRATCH 0x07 |
| |
| /****************************************************************************** |
| * On Chip Memory |
| ******************************************************************************/ |
| #define OCM_DCR_BASE 0x018 |
| #define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */ |
| #define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */ |
| #define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */ |
| #define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */ |
| |
| |
| /* |
| * Macro for accessing the indirect EBC register |
| */ |
| #define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) |
| #define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd) |
| |
| |
| #ifndef __ASSEMBLY__ |
| |
| typedef struct |
| { |
| unsigned long pllFwdDiv; |
| unsigned long pllFwdDivB; |
| unsigned long pllFbkDiv; |
| unsigned long pllPlbDiv; |
| unsigned long pllPciDiv; |
| unsigned long pllExtBusDiv; |
| unsigned long pllOpbDiv; |
| unsigned long freqVCOMhz; /* in MHz */ |
| unsigned long freqProcessor; |
| unsigned long freqPLB; |
| unsigned long freqPCI; |
| unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */ |
| unsigned long pciClkSync; /* PCI clock is synchronous */ |
| } PPC405_SYS_INFO; |
| |
| #endif /* _ASMLANGUAGE */ |
| |
| #define RESET_VECTOR 0xfffffffc |
| #define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for cache |
| line aligned data. */ |
| |
| #endif /* __PPC405_H__ */ |
| |