| /* |
| * (C) Copyright 2010-2015 |
| * NVIDIA Corporation <www.nvidia.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* Tegra AP (Application Processor) code */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/arch/gp_padctrl.h> |
| #include <asm/arch/mc.h> |
| #include <asm/arch-tegra/ap.h> |
| #include <asm/arch-tegra/clock.h> |
| #include <asm/arch-tegra/fuse.h> |
| #include <asm/arch-tegra/pmc.h> |
| #include <asm/arch-tegra/scu.h> |
| #include <asm/arch-tegra/tegra.h> |
| #include <asm/arch-tegra/warmboot.h> |
| |
| int tegra_get_chip(void) |
| { |
| int rev; |
| struct apb_misc_gp_ctlr *gp = |
| (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; |
| |
| /* |
| * This is undocumented, Chip ID is bits 15:8 of the register |
| * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for |
| * Tegra30, 0x35 for T114, and 0x40 for Tegra124. |
| */ |
| rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT; |
| debug("%s: CHIPID is 0x%02X\n", __func__, rev); |
| |
| return rev; |
| } |
| |
| int tegra_get_sku_info(void) |
| { |
| int sku_id; |
| struct fuse_regs *fuse = (struct fuse_regs *)NV_PA_FUSE_BASE; |
| |
| sku_id = readl(&fuse->sku_info) & 0xff; |
| debug("%s: SKU info byte is 0x%02X\n", __func__, sku_id); |
| |
| return sku_id; |
| } |
| |
| int tegra_get_chip_sku(void) |
| { |
| uint sku_id, chip_id; |
| |
| chip_id = tegra_get_chip(); |
| sku_id = tegra_get_sku_info(); |
| |
| switch (chip_id) { |
| case CHIPID_TEGRA20: |
| switch (sku_id) { |
| case SKU_ID_T20_7: |
| case SKU_ID_T20: |
| return TEGRA_SOC_T20; |
| case SKU_ID_T25SE: |
| case SKU_ID_AP25: |
| case SKU_ID_T25: |
| case SKU_ID_AP25E: |
| case SKU_ID_T25E: |
| return TEGRA_SOC_T25; |
| } |
| break; |
| case CHIPID_TEGRA30: |
| switch (sku_id) { |
| case SKU_ID_T33: |
| case SKU_ID_T30: |
| case SKU_ID_TM30MQS_P_A3: |
| default: |
| return TEGRA_SOC_T30; |
| } |
| break; |
| case CHIPID_TEGRA114: |
| switch (sku_id) { |
| case SKU_ID_T114_ENG: |
| case SKU_ID_T114_1: |
| default: |
| return TEGRA_SOC_T114; |
| } |
| break; |
| case CHIPID_TEGRA124: |
| switch (sku_id) { |
| case SKU_ID_T124_ENG: |
| default: |
| return TEGRA_SOC_T124; |
| } |
| break; |
| case CHIPID_TEGRA210: |
| switch (sku_id) { |
| case SKU_ID_T210_ENG: |
| default: |
| return TEGRA_SOC_T210; |
| } |
| break; |
| } |
| |
| /* unknown chip/sku id */ |
| printf("%s: ERROR: UNKNOWN CHIP/SKU ID COMBO (0x%02X/0x%02X)\n", |
| __func__, chip_id, sku_id); |
| return TEGRA_SOC_UNKNOWN; |
| } |
| |
| #ifndef CONFIG_ARM64 |
| static void enable_scu(void) |
| { |
| struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE; |
| u32 reg; |
| |
| /* Only enable the SCU on T20/T25 */ |
| if (tegra_get_chip() != CHIPID_TEGRA20) |
| return; |
| |
| /* If SCU already setup/enabled, return */ |
| if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE) |
| return; |
| |
| /* Invalidate all ways for all processors */ |
| writel(0xFFFF, &scu->scu_inv_all); |
| |
| /* Enable SCU - bit 0 */ |
| reg = readl(&scu->scu_ctrl); |
| reg |= SCU_CTRL_ENABLE; |
| writel(reg, &scu->scu_ctrl); |
| } |
| |
| static u32 get_odmdata(void) |
| { |
| /* |
| * ODMDATA is stored in the BCT in IRAM by the BootROM. |
| * The BCT start and size are stored in the BIT in IRAM. |
| * Read the data @ bct_start + (bct_size - 12). This works |
| * on BCTs for currently supported SoCs, which are locked down. |
| * If this changes in new chips, we can revisit this algorithm. |
| */ |
| unsigned long bct_start; |
| u32 odmdata; |
| |
| bct_start = readl(NV_PA_BASE_SRAM + NVBOOTINFOTABLE_BCTPTR); |
| odmdata = readl(bct_start + BCT_ODMDATA_OFFSET); |
| |
| return odmdata; |
| } |
| |
| static void init_pmc_scratch(void) |
| { |
| struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; |
| u32 odmdata; |
| int i; |
| |
| /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */ |
| for (i = 0; i < 23; i++) |
| writel(0, &pmc->pmc_scratch1+i); |
| |
| /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */ |
| odmdata = get_odmdata(); |
| writel(odmdata, &pmc->pmc_scratch20); |
| } |
| |
| #ifdef CONFIG_ARMV7_SECURE_RESERVE_SIZE |
| void protect_secure_section(void) |
| { |
| struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE; |
| |
| /* Must be MB aligned */ |
| BUILD_BUG_ON(CONFIG_ARMV7_SECURE_BASE & 0xFFFFF); |
| BUILD_BUG_ON(CONFIG_ARMV7_SECURE_RESERVE_SIZE & 0xFFFFF); |
| |
| writel(CONFIG_ARMV7_SECURE_BASE, &mc->mc_security_cfg0); |
| writel(CONFIG_ARMV7_SECURE_RESERVE_SIZE >> 20, &mc->mc_security_cfg1); |
| } |
| #endif |
| |
| #if defined(CONFIG_ARMV7_NONSEC) |
| static void smmu_flush(struct mc_ctlr *mc) |
| { |
| (void)readl(&mc->mc_smmu_config); |
| } |
| |
| static void smmu_enable(void) |
| { |
| struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE; |
| u32 value; |
| |
| /* |
| * Enable translation for all clients since access to this register |
| * is restricted to TrustZone-secured requestors. The kernel will use |
| * the per-SWGROUP enable bits to enable or disable translations. |
| */ |
| writel(0xffffffff, &mc->mc_smmu_translation_enable_0); |
| writel(0xffffffff, &mc->mc_smmu_translation_enable_1); |
| writel(0xffffffff, &mc->mc_smmu_translation_enable_2); |
| writel(0xffffffff, &mc->mc_smmu_translation_enable_3); |
| |
| /* |
| * Enable SMMU globally since access to this register is restricted |
| * to TrustZone-secured requestors. |
| */ |
| value = readl(&mc->mc_smmu_config); |
| value |= TEGRA_MC_SMMU_CONFIG_ENABLE; |
| writel(value, &mc->mc_smmu_config); |
| |
| smmu_flush(mc); |
| } |
| #else |
| static void smmu_enable(void) |
| { |
| } |
| #endif |
| |
| void s_init(void) |
| { |
| /* Init PMC scratch memory */ |
| init_pmc_scratch(); |
| |
| enable_scu(); |
| |
| /* init the cache */ |
| config_cache(); |
| |
| /* enable SMMU */ |
| smmu_enable(); |
| |
| /* init vpr */ |
| config_vpr(); |
| } |
| #endif |