| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Micrel PHY drivers |
| * |
| * Copyright 2010-2011 Freescale Semiconductor, Inc. |
| * author Andy Fleming |
| * (C) 2012 NetModule AG, David Andrey, added KSZ9031 |
| * (C) Copyright 2017 Adaptrum, Inc. |
| * Written by Alexandru Gagniuc <alex.g@adaptrum.com> for Adaptrum, Inc. |
| */ |
| #include <common.h> |
| #include <dm.h> |
| #include <env.h> |
| #include <errno.h> |
| #include <micrel.h> |
| #include <phy.h> |
| |
| /* |
| * KSZ9021 - KSZ9031 common |
| */ |
| |
| #define MII_KSZ90xx_PHY_CTL 0x1f |
| #define MIIM_KSZ90xx_PHYCTL_1000 (1 << 6) |
| #define MIIM_KSZ90xx_PHYCTL_100 (1 << 5) |
| #define MIIM_KSZ90xx_PHYCTL_10 (1 << 4) |
| #define MIIM_KSZ90xx_PHYCTL_DUPLEX (1 << 3) |
| |
| /* KSZ9021 PHY Registers */ |
| #define MII_KSZ9021_EXTENDED_CTRL 0x0b |
| #define MII_KSZ9021_EXTENDED_DATAW 0x0c |
| #define MII_KSZ9021_EXTENDED_DATAR 0x0d |
| |
| #define CTRL1000_PREFER_MASTER (1 << 10) |
| #define CTRL1000_CONFIG_MASTER (1 << 11) |
| #define CTRL1000_MANUAL_CONFIG (1 << 12) |
| |
| #define KSZ9021_PS_TO_REG 120 |
| |
| /* KSZ9031 PHY Registers */ |
| #define MII_KSZ9031_MMD_ACCES_CTRL 0x0d |
| #define MII_KSZ9031_MMD_REG_DATA 0x0e |
| |
| #define KSZ9031_PS_TO_REG 60 |
| |
| static int ksz90xx_startup(struct phy_device *phydev) |
| { |
| unsigned phy_ctl; |
| int ret; |
| |
| ret = genphy_update_link(phydev); |
| if (ret) |
| return ret; |
| |
| phy_ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ90xx_PHY_CTL); |
| |
| if (phy_ctl & MIIM_KSZ90xx_PHYCTL_DUPLEX) |
| phydev->duplex = DUPLEX_FULL; |
| else |
| phydev->duplex = DUPLEX_HALF; |
| |
| if (phy_ctl & MIIM_KSZ90xx_PHYCTL_1000) |
| phydev->speed = SPEED_1000; |
| else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_100) |
| phydev->speed = SPEED_100; |
| else if (phy_ctl & MIIM_KSZ90xx_PHYCTL_10) |
| phydev->speed = SPEED_10; |
| return 0; |
| } |
| |
| /* Common OF config bits for KSZ9021 and KSZ9031 */ |
| #ifdef CONFIG_DM_ETH |
| struct ksz90x1_reg_field { |
| const char *name; |
| const u8 size; /* Size of the bitfield, in bits */ |
| const u8 off; /* Offset from bit 0 */ |
| const u8 dflt; /* Default value */ |
| }; |
| |
| struct ksz90x1_ofcfg { |
| const u16 reg; |
| const u16 devad; |
| const struct ksz90x1_reg_field *grp; |
| const u16 grpsz; |
| }; |
| |
| static const struct ksz90x1_reg_field ksz90x1_rxd_grp[] = { |
| { "rxd0-skew-ps", 4, 0, 0x7 }, { "rxd1-skew-ps", 4, 4, 0x7 }, |
| { "rxd2-skew-ps", 4, 8, 0x7 }, { "rxd3-skew-ps", 4, 12, 0x7 } |
| }; |
| |
| static const struct ksz90x1_reg_field ksz90x1_txd_grp[] = { |
| { "txd0-skew-ps", 4, 0, 0x7 }, { "txd1-skew-ps", 4, 4, 0x7 }, |
| { "txd2-skew-ps", 4, 8, 0x7 }, { "txd3-skew-ps", 4, 12, 0x7 }, |
| }; |
| |
| static const struct ksz90x1_reg_field ksz9021_clk_grp[] = { |
| { "txen-skew-ps", 4, 0, 0x7 }, { "txc-skew-ps", 4, 4, 0x7 }, |
| { "rxdv-skew-ps", 4, 8, 0x7 }, { "rxc-skew-ps", 4, 12, 0x7 }, |
| }; |
| |
| static const struct ksz90x1_reg_field ksz9031_ctl_grp[] = { |
| { "txen-skew-ps", 4, 0, 0x7 }, { "rxdv-skew-ps", 4, 4, 0x7 } |
| }; |
| |
| static const struct ksz90x1_reg_field ksz9031_clk_grp[] = { |
| { "rxc-skew-ps", 5, 0, 0xf }, { "txc-skew-ps", 5, 5, 0xf } |
| }; |
| |
| static int ksz90x1_of_config_group(struct phy_device *phydev, |
| struct ksz90x1_ofcfg *ofcfg, |
| int ps_to_regval) |
| { |
| struct udevice *dev = phydev->dev; |
| struct phy_driver *drv = phydev->drv; |
| int val[4]; |
| int i, changed = 0, offset, max; |
| u16 regval = 0; |
| ofnode node; |
| |
| if (!drv || !drv->writeext) |
| return -EOPNOTSUPP; |
| |
| /* Look for a PHY node under the Ethernet node */ |
| node = dev_read_subnode(dev, "ethernet-phy"); |
| if (!ofnode_valid(node)) { |
| /* No node found, look in the Ethernet node */ |
| node = dev_ofnode(dev); |
| } |
| |
| for (i = 0; i < ofcfg->grpsz; i++) { |
| val[i] = ofnode_read_u32_default(node, ofcfg->grp[i].name, ~0); |
| offset = ofcfg->grp[i].off; |
| if (val[i] == -1) { |
| /* Default register value for KSZ9021 */ |
| regval |= ofcfg->grp[i].dflt << offset; |
| } else { |
| changed = 1; /* Value was changed in OF */ |
| /* Calculate the register value and fix corner cases */ |
| max = (1 << ofcfg->grp[i].size) - 1; |
| if (val[i] > ps_to_regval * max) { |
| regval |= max << offset; |
| } else { |
| regval |= (val[i] / ps_to_regval) << offset; |
| } |
| } |
| } |
| |
| if (!changed) |
| return 0; |
| |
| return drv->writeext(phydev, 0, ofcfg->devad, ofcfg->reg, regval); |
| } |
| |
| static int ksz9021_of_config(struct phy_device *phydev) |
| { |
| struct ksz90x1_ofcfg ofcfg[] = { |
| { MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0, ksz90x1_rxd_grp, 4 }, |
| { MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0, ksz90x1_txd_grp, 4 }, |
| { MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0, ksz9021_clk_grp, 4 }, |
| }; |
| int i, ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { |
| ret = ksz90x1_of_config_group(phydev, &ofcfg[i], |
| KSZ9021_PS_TO_REG); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ksz9031_of_config(struct phy_device *phydev) |
| { |
| struct ksz90x1_ofcfg ofcfg[] = { |
| { MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, 2, ksz9031_ctl_grp, 2 }, |
| { MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, 2, ksz90x1_rxd_grp, 4 }, |
| { MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, 2, ksz90x1_txd_grp, 4 }, |
| { MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, 2, ksz9031_clk_grp, 2 }, |
| }; |
| int i, ret = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(ofcfg); i++) { |
| ret = ksz90x1_of_config_group(phydev, &ofcfg[i], |
| KSZ9031_PS_TO_REG); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int ksz9031_center_flp_timing(struct phy_device *phydev) |
| { |
| struct phy_driver *drv = phydev->drv; |
| int ret = 0; |
| |
| if (!drv || !drv->writeext) |
| return -EOPNOTSUPP; |
| |
| ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_LO, 0x1A80); |
| if (ret) |
| return ret; |
| |
| ret = drv->writeext(phydev, 0, 0, MII_KSZ9031_FLP_BURST_TX_HI, 0x6); |
| return ret; |
| } |
| |
| #else /* !CONFIG_DM_ETH */ |
| static int ksz9021_of_config(struct phy_device *phydev) |
| { |
| return 0; |
| } |
| |
| static int ksz9031_of_config(struct phy_device *phydev) |
| { |
| return 0; |
| } |
| |
| static int ksz9031_center_flp_timing(struct phy_device *phydev) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* |
| * KSZ9021 |
| */ |
| int ksz9021_phy_extended_write(struct phy_device *phydev, int regnum, u16 val) |
| { |
| /* extended registers */ |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9021_EXTENDED_CTRL, regnum | 0x8000); |
| return phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9021_EXTENDED_DATAW, val); |
| } |
| |
| int ksz9021_phy_extended_read(struct phy_device *phydev, int regnum) |
| { |
| /* extended registers */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_CTRL, regnum); |
| return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9021_EXTENDED_DATAR); |
| } |
| |
| |
| static int ksz9021_phy_extread(struct phy_device *phydev, int addr, int devaddr, |
| int regnum) |
| { |
| return ksz9021_phy_extended_read(phydev, regnum); |
| } |
| |
| static int ksz9021_phy_extwrite(struct phy_device *phydev, int addr, |
| int devaddr, int regnum, u16 val) |
| { |
| return ksz9021_phy_extended_write(phydev, regnum, val); |
| } |
| |
| static int ksz9021_config(struct phy_device *phydev) |
| { |
| unsigned ctrl1000 = 0; |
| const unsigned master = CTRL1000_PREFER_MASTER | |
| CTRL1000_CONFIG_MASTER | CTRL1000_MANUAL_CONFIG; |
| unsigned features = phydev->drv->features; |
| int ret; |
| |
| ret = ksz9021_of_config(phydev); |
| if (ret) |
| return ret; |
| |
| if (env_get("disable_giga")) |
| features &= ~(SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full); |
| /* force master mode for 1000BaseT due to chip errata */ |
| if (features & SUPPORTED_1000baseT_Half) |
| ctrl1000 |= ADVERTISE_1000HALF | master; |
| if (features & SUPPORTED_1000baseT_Full) |
| ctrl1000 |= ADVERTISE_1000FULL | master; |
| phydev->advertising = features; |
| phydev->supported = features; |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, ctrl1000); |
| genphy_config_aneg(phydev); |
| genphy_restart_aneg(phydev); |
| return 0; |
| } |
| |
| static struct phy_driver ksz9021_driver = { |
| .name = "Micrel ksz9021", |
| .uid = 0x221610, |
| .mask = 0xfffffe, |
| .features = PHY_GBIT_FEATURES, |
| .config = &ksz9021_config, |
| .startup = &ksz90xx_startup, |
| .shutdown = &genphy_shutdown, |
| .writeext = &ksz9021_phy_extwrite, |
| .readext = &ksz9021_phy_extread, |
| }; |
| |
| /* |
| * KSZ9031 |
| */ |
| int ksz9031_phy_extended_write(struct phy_device *phydev, |
| int devaddr, int regnum, u16 mode, u16 val) |
| { |
| /*select register addr for mmd*/ |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9031_MMD_ACCES_CTRL, devaddr); |
| /*select register for mmd*/ |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9031_MMD_REG_DATA, regnum); |
| /*setup mode*/ |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9031_MMD_ACCES_CTRL, (mode | devaddr)); |
| /*write the value*/ |
| return phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9031_MMD_REG_DATA, val); |
| } |
| |
| int ksz9031_phy_extended_read(struct phy_device *phydev, int devaddr, |
| int regnum, u16 mode) |
| { |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9031_MMD_ACCES_CTRL, devaddr); |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9031_MMD_REG_DATA, regnum); |
| phy_write(phydev, MDIO_DEVAD_NONE, |
| MII_KSZ9031_MMD_ACCES_CTRL, (devaddr | mode)); |
| return phy_read(phydev, MDIO_DEVAD_NONE, MII_KSZ9031_MMD_REG_DATA); |
| } |
| |
| static int ksz9031_phy_extread(struct phy_device *phydev, int addr, int devaddr, |
| int regnum) |
| { |
| return ksz9031_phy_extended_read(phydev, devaddr, regnum, |
| MII_KSZ9031_MOD_DATA_NO_POST_INC); |
| } |
| |
| static int ksz9031_phy_extwrite(struct phy_device *phydev, int addr, |
| int devaddr, int regnum, u16 val) |
| { |
| return ksz9031_phy_extended_write(phydev, devaddr, regnum, |
| MII_KSZ9031_MOD_DATA_POST_INC_RW, val); |
| } |
| |
| static int ksz9031_config(struct phy_device *phydev) |
| { |
| int ret; |
| |
| ret = ksz9031_of_config(phydev); |
| if (ret) |
| return ret; |
| ret = ksz9031_center_flp_timing(phydev); |
| if (ret) |
| return ret; |
| |
| /* add an option to disable the gigabit feature of this PHY */ |
| if (env_get("disable_giga")) { |
| unsigned features; |
| unsigned bmcr; |
| |
| /* disable speed 1000 in features supported by the PHY */ |
| features = phydev->drv->features; |
| features &= ~(SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full); |
| phydev->advertising = phydev->supported = features; |
| |
| /* disable speed 1000 in Basic Control Register */ |
| bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| bmcr &= ~(1 << 6); |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, bmcr); |
| |
| /* disable speed 1000 in 1000Base-T Control Register */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, 0); |
| |
| /* start autoneg */ |
| genphy_config_aneg(phydev); |
| genphy_restart_aneg(phydev); |
| |
| return 0; |
| } |
| |
| return genphy_config(phydev); |
| } |
| |
| static struct phy_driver ksz9031_driver = { |
| .name = "Micrel ksz9031", |
| .uid = 0x221620, |
| .mask = 0xfffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &ksz9031_config, |
| .startup = &ksz90xx_startup, |
| .shutdown = &genphy_shutdown, |
| .writeext = &ksz9031_phy_extwrite, |
| .readext = &ksz9031_phy_extread, |
| }; |
| |
| int phy_micrel_ksz90x1_init(void) |
| { |
| phy_register(&ksz9021_driver); |
| phy_register(&ksz9031_driver); |
| return 0; |
| } |