| // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| /* |
| * Copyright 2020 Toradex |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/usb/pd.h> |
| #include "imx8mm.dtsi" |
| |
| / { |
| model = "Toradex Verdin iMX8M Mini Quad/DualLite"; |
| compatible = "toradex,verdin-imx8mm", "fsl,imx8mm"; |
| |
| chosen { |
| stdout-path = &uart1; |
| }; |
| |
| aliases { |
| eeprom0 = &eeprom_module; |
| eeprom1 = &eeprom_carrier_board; |
| eeprom2 = &eeprom_display_adapter; |
| }; |
| |
| /* fixed clock dedicated to SPI CAN controller */ |
| clk20m: oscillator { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <20000000>; |
| }; |
| |
| reg_ethphy: regulator-ethphy { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; |
| off-on-delay = <500000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_eth>; |
| regulator-boot-on; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "V3.3_ETH"; |
| startup-delay-us = <200000>; |
| }; |
| |
| reg_usb_otg1_vbus: regulator-usb-otg1 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| /* Verdin USB1_EN */ |
| gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usb1_en>; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_usb_otg2_vbus: regulator-usb-otg2 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| /* Verdin USB2_EN */ |
| gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usb2_en>; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2 { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; |
| regulator-name = "V3.3_SD"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| startup-delay-us = <2000>; |
| }; |
| |
| reg_wifi_en: regulator-wifi-en { |
| compatible = "regulator-fixed"; |
| enable-active-high; |
| gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wifi_pwr_en>; |
| regulator-name = "V3.3_WI-FI"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| startup-delay-us = <2000>; |
| }; |
| }; |
| |
| &A53_0 { |
| arm-supply = <&buck2_reg>; |
| }; |
| |
| &clk { |
| assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>, <&clk IMX8MM_AUDIO_PLL2>; |
| assigned-clock-rates = <786432000>, <722534400>; |
| }; |
| |
| /* Verdin SPI_1 */ |
| &ecspi2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| spidev20: spidev@0 { |
| compatible = "toradex,evalspi"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; |
| status = "okay"; |
| }; |
| }; |
| |
| /* On-module CAN controller 1 & 2 */ |
| &ecspi3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>, |
| <&gpio1 5 GPIO_ACTIVE_LOW>; |
| /* This property is required, even if marked as obsolete in the doku */ |
| fsl,spi-num-chipselects = <2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi3>; |
| status = "okay"; |
| |
| can1: can@0 { |
| compatible = "microchip,mcp2517fd"; |
| clocks = <&clk20m>; |
| gpio-controller; |
| interrupt-parent = <&gpio1>; |
| interrupts = <6 IRQ_TYPE_EDGE_FALLING>; |
| microchip,clock-allways-on; |
| microchip,clock-out-div = <1>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can1_int>; |
| reg = <0>; |
| spi-max-frequency = <2000000>; |
| }; |
| |
| can2: can@1 { |
| compatible = "microchip,mcp2517fd"; |
| clocks = <&clk20m>; |
| gpio-controller; |
| interrupt-parent = <&gpio1>; |
| interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_can2_int>; |
| reg = <1>; |
| spi-max-frequency = <2000000>; |
| }; |
| }; |
| |
| &fec1 { |
| fsl,magic-packet; |
| phy-handle = <ðphy0>; |
| phy-mode = "rgmii"; |
| phy-supply = <®_ethphy>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_fec1>; |
| pinctrl-1 = <&pinctrl_fec1_sleep>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@7 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| interrupt-parent = <&gpio1>; |
| interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| micrel,led-mode = <0>; |
| reg = <7>; |
| }; |
| }; |
| }; |
| |
| &gpio4 { |
| /* |
| * The SE050 security element may be driven via I2C from user space. |
| * The element itself is enabled here as it has no kernel driver. |
| */ |
| se050_ena { |
| gpio-hog; |
| gpios = <19 GPIO_ACTIVE_HIGH>; |
| line-name = "SE050_ENABLE"; |
| output-high; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_se050_ena>; |
| }; |
| }; |
| |
| /* On-module I2C */ |
| &i2c1 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| /* Assembled on V1.1 HW and later */ |
| pmic { |
| reg = <0x25>; |
| u-boot,dm-spl; |
| compatible = "nxp,pca9450a"; |
| /* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */ |
| pinctrl-0 = <&pinctrl_pmic>; |
| gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>; |
| |
| regulators { |
| u-boot,dm-spl; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pca9450,pmic-buck2-uses-i2c-dvs; |
| /* Run/Standby voltage */ |
| pca9450,pmic-buck2-dvs-voltage = <950000>, <850000>; |
| |
| buck1_reg: regulator@0 { |
| reg = <0>; |
| regulator-compatible = "buck1"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <2187500>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <3125>; |
| }; |
| |
| buck2_reg: regulator@1 { |
| reg = <1>; |
| regulator-compatible = "buck2"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <2187500>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <3125>; |
| }; |
| |
| buck3_reg: regulator@2 { |
| reg = <2>; |
| regulator-compatible = "buck3"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <2187500>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck4_reg: regulator@3 { |
| reg = <3>; |
| regulator-compatible = "buck4"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3400000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck5_reg: regulator@4 { |
| reg = <4>; |
| regulator-compatible = "buck5"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3400000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| buck6_reg: regulator@5 { |
| reg = <5>; |
| regulator-compatible = "buck6"; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <3400000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo1_reg: regulator@6 { |
| reg = <6>; |
| regulator-compatible = "ldo1"; |
| regulator-min-microvolt = <1600000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo2_reg: regulator@7 { |
| reg = <7>; |
| regulator-compatible = "ldo2"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1150000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo3_reg: regulator@8 { |
| reg = <8>; |
| regulator-compatible = "ldo3"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo4_reg: regulator@9 { |
| reg = <9>; |
| regulator-compatible = "ldo4"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| ldo5_reg: regulator@10 { |
| reg = <10>; |
| regulator-compatible = "ldo5"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| }; |
| }; |
| |
| /* Epson RX8130 real time clock on carrier board */ |
| rtc@32 { |
| compatible = "epson,rx8130"; |
| reg = <0x32>; |
| }; |
| |
| eeprom_module: eeprom@50 { |
| compatible = "st,24c02", "atmel,24c02", "i2c-eeprom"; |
| pagesize = <16>; |
| reg = <0x50>; |
| }; |
| }; |
| |
| /* Verdin I2C_2_DSI */ |
| &i2c2 { |
| clock-frequency = <10000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| }; |
| |
| /* Verdin I2C_3_HDMI N/A */ |
| |
| /* Verdin I2C_4_CSI */ |
| &i2c3 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| }; |
| |
| /* Verdin I2C_1 */ |
| &i2c4 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| /* Audio Codec */ |
| wm8904_1a: codec@1a { |
| compatible = "wlf,wm8904"; |
| #sound-dai-cells = <0>; |
| clocks = <&clk IMX8MM_CLK_SAI2_ROOT>; |
| clock-names = "mclk"; |
| reg = <0x1a>; |
| }; |
| |
| gpio_expander_21: gpio-expander@21 { |
| compatible = "nxp,pcal6416"; |
| #gpio-cells = <2>; |
| gpio-controller; |
| reg = <0x21>; |
| }; |
| |
| /* Current measurement into module VCC */ |
| hwmon@40 { |
| compatible = "ti,ina219"; |
| reg = <0x40>; |
| shunt-resistor = <10000>; |
| status = "okay"; |
| }; |
| |
| /* EEPROM on display adapter (MIPI DSI Display Adapter) */ |
| eeprom_display_adapter: eeprom@50 { |
| compatible = "st,24c02", "atmel,24c02", "i2c-eeprom"; |
| pagesize = <16>; |
| reg = <0x50>; |
| }; |
| |
| /* EEPROM on carrier board */ |
| eeprom_carrier_board: eeprom@57 { |
| compatible = "st,24c02", "atmel,24c02", "i2c-eeprom"; |
| pagesize = <16>; |
| reg = <0x57>; |
| }; |
| }; |
| |
| /* Verdin PWM_3_DSI */ |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm_1>; |
| #pwm-cells = <3>; |
| status = "okay"; |
| }; |
| |
| /* Verdin PWM_1 */ |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm_2>; |
| #pwm-cells = <3>; |
| status = "okay"; |
| }; |
| |
| /* Verdin PWM_2 */ |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm_3>; |
| #pwm-cells = <3>; |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_3, Console/Debug UART */ |
| &uart1 { |
| fsl,uart-has-rtscts; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_1 */ |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| fsl,uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_2 */ |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| fsl,uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| /* Verdin UART_4 */ |
| /* |
| * resource allocated to M4 by default, must not be accessed from A-35 or you |
| * get an OOPS |
| */ |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "disabled"; |
| }; |
| |
| /* Verdin USB_1 */ |
| &usbotg1 { |
| dr_mode = "otg"; |
| picophy,dc-vol-level-adjust = <7>; |
| picophy,pre-emp-curr-control = <3>; |
| vbus-supply = <®_usb_otg1_vbus>; |
| status = "okay"; |
| }; |
| |
| /* Verdin USB_2 */ |
| &usbotg2 { |
| dr_mode = "host"; |
| picophy,dc-vol-level-adjust = <7>; |
| picophy,pre-emp-curr-control = <3>; |
| vbus-supply = <®_usb_otg2_vbus>; |
| status = "okay"; |
| }; |
| |
| /* On-module eMMC */ |
| &usdhc1 { |
| bus-width = <8>; |
| keep-power-in-suspend; |
| non-removable; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| pm-ignore-notify; |
| status = "okay"; |
| /* TODO Strobe */ |
| }; |
| |
| /* Verdin SD_1 */ |
| &usdhc2 { |
| bus-width = <4>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| status = "okay"; |
| }; |
| |
| /* On-module Wi-Fi */ |
| &usdhc3 { |
| bus-width = <4>; |
| non-removable; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>; |
| vmmc-supply = <®_wifi_en>; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| fsl,ext-reset-output; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_dsi_bkl_en>, <&pinctrl_gpio1>, <&pinctrl_gpio2>, |
| <&pinctrl_gpio3>, <&pinctrl_gpio4>, <&pinctrl_gpio5>, |
| <&pinctrl_gpio6>, <&pinctrl_gpio7>, <&pinctrl_gpio8>, |
| <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, |
| <&pinctrl_gpio_hog3>, <&pinctrl_gpio_hpd>; |
| |
| pinctrl_can1_int: can1intgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x1c4 |
| >; |
| }; |
| |
| pinctrl_can2_int: can2intgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x1c4 |
| >; |
| }; |
| |
| pinctrl_ctrl_force_off_moci: ctrlforceoffgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1c4 /* SODIMM 250 */ |
| >; |
| }; |
| |
| pinctrl_dsi_bkl_en: dsi_bkl_en { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x1c4 /* SODIMM 21 */ |
| >; |
| }; |
| |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x1c4 /* SODIMM 198 */ |
| MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x4 /* SODIMM 200 */ |
| MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x4 /* SODIMM 196 */ |
| MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x1c4 /* SODIMM 202 */ |
| >; |
| }; |
| |
| pinctrl_ecspi3: ecspi3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x1c4 |
| MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x4 |
| MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x4 |
| MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x1c4 |
| MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x1c4 |
| >; |
| }; |
| |
| pinctrl_fec1: fec1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f |
| MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f |
| MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f |
| MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f |
| MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f |
| MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f |
| MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x1c4 |
| >; |
| }; |
| |
| pinctrl_fec1_sleep: fec1-sleepgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 |
| MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 |
| MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21 0x1f |
| MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20 0x1f |
| MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19 0x1f |
| MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18 0x1f |
| MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 |
| MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 |
| MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 |
| MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 |
| MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23 0x1f |
| MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x1f |
| MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 |
| MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 |
| MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x184 |
| >; |
| }; |
| |
| pinctrl_flexspi0: flexspi0grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 /* SODIMM 52 */ |
| MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 /* SODIMM 54 */ |
| MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x82 /* SODIMM 64 */ |
| MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 /* SODIMM 56 */ |
| MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 /* SODIMM 58 */ |
| MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 /* SODIMM 60 */ |
| MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 /* SODIMM 62 */ |
| MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS 0x82 /* SODIMM 66 */ |
| >; |
| }; |
| |
| /* (MEZ_)GPIO_1 shared with (MEZ_)DSI_1_INT# on Verdin Development Board */ |
| pinctrl_gpio1: gpio1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x184 /* SODIMM 206 */ |
| >; |
| }; |
| |
| pinctrl_gpio2: gpio2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x184 /* SODIMM 208 */ |
| >; |
| }; |
| |
| pinctrl_gpio3: gpio3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x184 /* SODIMM 210 */ |
| >; |
| }; |
| |
| pinctrl_gpio4: gpio4grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x184 /* SODIMM 212 */ |
| >; |
| }; |
| |
| pinctrl_gpio5: gpio5grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x184 /* SODIMM 216 */ |
| >; |
| }; |
| |
| pinctrl_gpio6: gpio6grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x184 /* SODIMM 218 */ |
| >; |
| }; |
| |
| pinctrl_gpio7: gpio7grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x184 /* SODIMM 220 */ |
| >; |
| }; |
| |
| pinctrl_gpio8: gpio8grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x184 /* SODIMM 222 */ |
| >; |
| }; |
| |
| pinctrl_gpio_hog1: gpiohog1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20 0x1c4 /* SODIMM 88 */ |
| MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1 0x1c4 /* SODIMM 90 */ |
| MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x1c4 /* SODIMM 92 */ |
| MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x1c4 /* SODIMM 94 */ |
| MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4 0x1c4 /* SODIMM 96 */ |
| MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x1c4 /* SODIMM 100 */ |
| MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x1c4 /* SODIMM 102 */ |
| MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 0x1c4 /* SODIMM 104 */ |
| MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x1c4 /* SODIMM 106 */ |
| MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13 0x1c4 /* SODIMM 108 */ |
| MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x1c4 /* SODIMM 112 */ |
| MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15 0x1c4 /* SODIMM 114 */ |
| MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16 0x1c4 /* SODIMM 116 */ |
| MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x1c4 /* SODIMM 118 */ |
| MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10 0x1c4 /* SODIMM 120 */ |
| >; |
| }; |
| |
| pinctrl_gpio_hog2: gpiohog2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1c4 /* SODIMM 91 */ |
| >; |
| }; |
| |
| pinctrl_gpio_hog3: gpiohog3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x1c4 /* SODIMM 157 */ |
| MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4 /* SODIMM 187 */ |
| >; |
| }; |
| |
| /* (MEZ_)DSI_1_INT# shared with (MEZ_)GPIO_1 on Verdin Development Board */ |
| pinctrl_gpio_hpd: gpiohpdgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15 0x184 /* SODIMM 17 */ |
| >; |
| }; |
| |
| /* On-module I2C */ |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c6 |
| MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c6 |
| >; |
| }; |
| |
| /* Verdin I2C_4_CSI */ |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c6 /* SODIMM 55 */ |
| MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c6 /* SODIMM 53 */ |
| >; |
| }; |
| |
| /* Verdin I2C_2_DSI */ |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c6 /* SODIMM 95 */ |
| MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c6 /* SODIMM 93 */ |
| >; |
| }; |
| |
| /* Verdin I2C_1 */ |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c6 /* SODIMM 14 */ |
| MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c6 /* SODIMM 12 */ |
| >; |
| }; |
| |
| pinctrl_pcie0: pcie0grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x6 /* SODIMM 244 */ |
| MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x6 /* PMIC_EN_PCIe_CLK */ |
| >; |
| }; |
| |
| pinctrl_pmic: pmicirqgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 |
| >; |
| }; |
| |
| pinctrl_pwm_1: pwm1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* SODIMM 19 */ |
| >; |
| }; |
| |
| pinctrl_pwm_2: pwm2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x6 /* SODIMM 15 */ |
| >; |
| }; |
| |
| pinctrl_pwm_3: pwm3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x6 /* SODIMM 16 */ |
| >; |
| }; |
| |
| pinctrl_reg_eth: regethgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_WP_GPIO2_IO20 0x184 |
| >; |
| }; |
| |
| pinctrl_reg_usb1_en: regusb1engrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x184 /* SODIMM 155 */ |
| >; |
| }; |
| |
| pinctrl_reg_usb2_en: regusb2engrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x184 /* SODIMM 185 */ |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK 0xd6 /* SODIMM 38 */ |
| MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6 /* SODIMM 36 */ |
| MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0xd6 /* SODIMM 30 */ |
| MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0xd6 /* SODIMM 34 */ |
| MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0xd6 /* SODIMM 32 */ |
| >; |
| }; |
| |
| pinctrl_sai5: sai5grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6 /* SODIMM 48 */ |
| MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6 /* SODIMM 44 */ |
| MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6 /* SODIMM 42 */ |
| MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6 /* SODIMM 46 */ |
| >; |
| }; |
| |
| pinctrl_se050_ena: se050enagrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x184 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1c4 /* SODIMM 147 */ |
| MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1c4 /* SODIMM 149 */ |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1c4 /* SODIMM 133 */ |
| MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1c4 /* SODIMM 135 */ |
| MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1c4 /* SODIMM 131 */ |
| MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1c4 /* SODIMM 129 */ |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1c4 /* SODIMM 141 */ |
| MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1c4 /* SODIMM 139 */ |
| MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1c4 /* SODIMM 137 */ |
| MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x1c4 /* SODIMM 143 */ |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x1c4 /* SODIMM 151 */ |
| MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x1c4 /* SODIMM 153 */ |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 |
| MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 |
| MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 |
| MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1grp100mhz { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 |
| MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 |
| MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 |
| MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1grp200mhz { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 |
| MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 |
| MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 |
| MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 |
| >; |
| }; |
| |
| pinctrl_usdhc2_cd: usdhc2cdgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4 /* SODIMM 84 */ |
| >; |
| }; |
| |
| pinctrl_usdhc2_pwr_en: usdhc2pwrengrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5 0x184 /* SODIMM 76 */ |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 /* SODIMM 78 */ |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 /* SODIMM 74 */ |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 /* SODIMM 80 */ |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 /* SODIMM 82 */ |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 /* SODIMM 70 */ |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 /* SODIMM 72 */ |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2grp100mhz { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4 |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2grp200mhz { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0 |
| MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196 |
| MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6 |
| MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3grp100mhz { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3grp200mhz { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 |
| MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 |
| MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 |
| MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 |
| >; |
| }; |
| |
| pinctrl_wifi_ctrl: wifictrlgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x1c4 /* WIFI_WKUP_BT */ |
| MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x1c4 /* WIFI_W_WKUP_HOST */ |
| MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x1c4 /* WIFI_WKUP_WLAN */ |
| >; |
| }; |
| |
| pinctrl_wifi_i2s: wifii2sgrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK 0xd6 |
| MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0 0xd6 |
| MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC 0xd6 |
| MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0 0xd6 |
| >; |
| }; |
| |
| pinctrl_wifi_pwr_en: wifipwrengrp { |
| fsl,pins = < |
| MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x184 /* PMIC_EN_WIFI */ |
| >; |
| }; |
| }; |