| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2008-2015 Freescale Semiconductor, Inc. |
| * |
| * Command for encapsulating DEK blob |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <asm/byteorder.h> |
| #include <linux/compiler.h> |
| #include <fsl_sec.h> |
| #include <asm/arch/clock.h> |
| #include <mapmem.h> |
| #include <tee.h> |
| #ifdef CONFIG_IMX_SECO_DEK_ENCAP |
| #include <asm/arch/sci/sci.h> |
| #include <asm/arch/image.h> |
| #endif |
| #include <cpu_func.h> |
| |
| /** |
| * blob_dek() - Encapsulate the DEK as a blob using CAM's Key |
| * @src: - Address of data to be encapsulated |
| * @dst: - Desination address of encapsulated data |
| * @len: - Size of data to be encapsulated |
| * |
| * Returns zero on success,and negative on error. |
| */ |
| #ifdef CONFIG_IMX_CAAM_DEK_ENCAP |
| static int blob_encap_dek(u32 src_addr, u32 dst_addr, u32 len) |
| { |
| u8 *src_ptr, *dst_ptr; |
| |
| src_ptr = map_sysmem(src_addr, len / 8); |
| dst_ptr = map_sysmem(dst_addr, BLOB_SIZE(len / 8)); |
| |
| hab_caam_clock_enable(1); |
| |
| u32 out_jr_size = sec_in32(CONFIG_SYS_FSL_JR0_ADDR + |
| FSL_CAAM_ORSR_JRa_OFFSET); |
| if (out_jr_size != FSL_CAAM_MAX_JR_SIZE) |
| sec_init(); |
| |
| if (!((len == 128) | (len == 192) | (len == 256))) { |
| debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n"); |
| return -1; |
| } |
| |
| len /= 8; |
| return blob_dek(src_ptr, dst_ptr, len); |
| } |
| #endif /* CONFIG_IMX_CAAM_DEK_ENCAP */ |
| |
| #ifdef CONFIG_IMX_OPTEE_DEK_ENCAP |
| |
| #define PTA_DEK_BLOB_PTA_UUID {0xef477737, 0x0db1, 0x4a9d, \ |
| {0x84, 0x37, 0xf2, 0xf5, 0x35, 0xc0, 0xbd, 0x92} } |
| |
| #define OPTEE_BLOB_HDR_SIZE 8 |
| |
| static int blob_encap_dek(u32 src_addr, u32 dst_addr, u32 len) |
| { |
| struct udevice *dev = NULL; |
| struct tee_shm *shm_input, *shm_output; |
| struct tee_open_session_arg arg = {0}; |
| struct tee_invoke_arg arg_func = {0}; |
| const struct tee_optee_ta_uuid uuid = PTA_DEK_BLOB_PTA_UUID; |
| struct tee_param param[4] = {0}; |
| int ret; |
| |
| /* Get tee device */ |
| dev = tee_find_device(NULL, NULL, NULL, NULL); |
| if (!dev) { |
| printf("Cannot get OP-TEE device\n"); |
| return -1; |
| } |
| |
| /* Set TA UUID */ |
| tee_optee_ta_uuid_to_octets(arg.uuid, &uuid); |
| |
| /* Open TA session */ |
| ret = tee_open_session(dev, &arg, 0, NULL); |
| if (ret < 0) { |
| printf("Cannot open session with PTA Blob 0x%X\n", ret); |
| return -1; |
| } |
| |
| /* Allocate shared input and output buffers for TA */ |
| ret = tee_shm_register(dev, (void *)(ulong)src_addr, len / 8, 0x0, &shm_input); |
| if (ret < 0) { |
| printf("Cannot register input shared memory 0x%X\n", ret); |
| goto error; |
| } |
| |
| ret = tee_shm_register(dev, (void *)(ulong)dst_addr, |
| BLOB_SIZE(len / 8) + OPTEE_BLOB_HDR_SIZE, |
| 0x0, &shm_output); |
| if (ret < 0) { |
| printf("Cannot register output shared memory 0x%X\n", ret); |
| goto error; |
| } |
| |
| param[0].u.memref.shm = shm_input; |
| param[0].u.memref.size = shm_input->size; |
| param[0].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INPUT; |
| param[1].u.memref.shm = shm_output; |
| param[1].u.memref.size = shm_output->size; |
| param[1].attr = TEE_PARAM_ATTR_TYPE_MEMREF_OUTPUT; |
| param[2].attr = TEE_PARAM_ATTR_TYPE_NONE; |
| param[3].attr = TEE_PARAM_ATTR_TYPE_NONE; |
| |
| arg_func.func = 0; |
| arg_func.session = arg.session; |
| |
| /* Generate DEK blob */ |
| arg_func.session = arg.session; |
| ret = tee_invoke_func(dev, &arg_func, 4, param); |
| if (ret < 0) |
| printf("Cannot generate Blob with PTA DEK Blob 0x%X\n", ret); |
| |
| error: |
| /* Free shared memory */ |
| tee_shm_free(shm_input); |
| tee_shm_free(shm_output); |
| |
| /* Close session */ |
| ret = tee_close_session(dev, arg.session); |
| if (ret < 0) |
| printf("Cannot close session with PTA DEK Blob 0x%X\n", ret); |
| |
| return ret; |
| } |
| #endif /* CONFIG_IMX_OPTEE_DEK_ENCAP */ |
| #ifdef CONFIG_IMX_SECO_DEK_ENCAP |
| |
| #define DEK_BLOB_KEY_ID 0x0 |
| |
| #define AHAB_PRIVATE_KEY 0x81 |
| #define AHAB_VERSION 0x00 |
| #define AHAB_MODE_CBC 0x67 |
| #define AHAB_ALG_AES 0x55 |
| #define AHAB_128_AES_KEY 0x10 |
| #define AHAB_192_AES_KEY 0x18 |
| #define AHAB_256_AES_KEY 0x20 |
| #define AHAB_FLAG_KEK 0x80 |
| #define AHAB_DEK_BLOB 0x01 |
| |
| #define DEK_BLOB_HDR_SIZE 8 |
| #define SECO_PT 2U |
| |
| static int blob_encap_dek(u32 src_addr, u32 dst_addr, u32 len) |
| { |
| sc_err_t err; |
| sc_rm_mr_t mr_input, mr_output; |
| struct generate_key_blob_hdr hdr; |
| u8 in_size, out_size; |
| u8 *src_ptr, *dst_ptr; |
| int ret = 0; |
| int i; |
| |
| /* Set sizes */ |
| in_size = sizeof(struct generate_key_blob_hdr) + len / 8; |
| out_size = BLOB_SIZE(len / 8) + DEK_BLOB_HDR_SIZE; |
| |
| /* Get src and dst virtual addresses */ |
| src_ptr = map_sysmem(src_addr, in_size); |
| dst_ptr = map_sysmem(dst_addr, out_size); |
| |
| /* Check addr input */ |
| if (!(src_ptr && dst_ptr)) { |
| debug("src_addr or dst_addr invalid\n"); |
| return -1; |
| } |
| |
| /* Build key header */ |
| hdr.version = AHAB_VERSION; |
| hdr.length_lsb = sizeof(struct generate_key_blob_hdr) + len / 8; |
| hdr.length_msb = 0x00; |
| hdr.tag = AHAB_PRIVATE_KEY; |
| hdr.flags = AHAB_DEK_BLOB; |
| hdr.algorithm = AHAB_ALG_AES; |
| hdr.mode = AHAB_MODE_CBC; |
| |
| switch (len) { |
| case 128: |
| hdr.size = AHAB_128_AES_KEY; |
| break; |
| case 192: |
| hdr.size = AHAB_192_AES_KEY; |
| break; |
| case 256: |
| hdr.size = AHAB_256_AES_KEY; |
| break; |
| default: |
| /* Not supported */ |
| debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n"); |
| return -1; |
| } |
| |
| /* Build input message */ |
| memmove((void *)(src_ptr + sizeof(struct generate_key_blob_hdr)), |
| (void *)src_ptr, len / 8); |
| memcpy((void *)src_ptr, (void *)&hdr, |
| sizeof(struct generate_key_blob_hdr)); |
| |
| /* Flush the cache before triggering the CAAM DMA */ |
| flush_dcache_range(src_addr, src_addr + in_size); |
| |
| /* Find input memory region */ |
| err = sc_rm_find_memreg((-1), &mr_input, src_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1), |
| ALIGN(src_addr + in_size, CONFIG_SYS_CACHELINE_SIZE)); |
| if (err) { |
| printf("Error: find memory region 0x%X\n", src_addr); |
| return -ENOMEM; |
| } |
| |
| /* Find output memory region */ |
| err = sc_rm_find_memreg((-1), &mr_output, dst_addr & ~(CONFIG_SYS_CACHELINE_SIZE - 1), |
| ALIGN(dst_addr + out_size, CONFIG_SYS_CACHELINE_SIZE)); |
| if (err) { |
| printf("Error: find memory region 0x%X\n", dst_addr); |
| return -ENOMEM; |
| } |
| |
| /* Set memory region permissions for SECO */ |
| err = sc_rm_set_memreg_permissions(-1, mr_input, SECO_PT, |
| SC_RM_PERM_FULL); |
| if (err) { |
| printf("Set permission failed for input memory region\n"); |
| ret = -EPERM; |
| goto error; |
| } |
| |
| err = sc_rm_set_memreg_permissions(-1, mr_output, SECO_PT, |
| SC_RM_PERM_FULL); |
| if (err) { |
| printf("Set permission failed for output memory region\n"); |
| ret = -EPERM; |
| goto error; |
| } |
| |
| /* Flush output data before SECO operation */ |
| flush_dcache_range((ulong)dst_ptr, (ulong)(dst_ptr + |
| roundup(out_size, ARCH_DMA_MINALIGN))); |
| |
| /* Generate DEK blob */ |
| err = sc_seco_gen_key_blob((-1), 0x0, src_addr, dst_addr, out_size); |
| if (err) { |
| ret = -EPERM; |
| goto error; |
| } |
| |
| /* Invalidate output buffer */ |
| invalidate_dcache_range((ulong)dst_ptr, (ulong)(dst_ptr + |
| roundup(out_size, ARCH_DMA_MINALIGN))); |
| |
| printf("DEK Blob\n"); |
| for (i = 0; i < DEK_BLOB_HDR_SIZE + BLOB_SIZE(len / 8); i++) |
| printf("%02X", dst_ptr[i]); |
| printf("\n"); |
| |
| error: |
| /* Remove memory region permission to SECO */ |
| err = sc_rm_set_memreg_permissions(-1, mr_input, SECO_PT, |
| SC_RM_PERM_NONE); |
| if (err) { |
| printf("Error: remove permission failed for input\n"); |
| ret = -EPERM; |
| } |
| |
| err = sc_rm_set_memreg_permissions(-1, mr_output, SECO_PT, |
| SC_RM_PERM_NONE); |
| if (err) { |
| printf("Error: remove permission failed for output\n"); |
| ret = -EPERM; |
| } |
| |
| return ret; |
| } |
| #endif /* CONFIG_IMX_SECO_DEK_ENCAP */ |
| |
| /** |
| * do_dek_blob() - Handle the "dek_blob" command-line command |
| * @cmdtp: Command data struct pointer |
| * @flag: Command flag |
| * @argc: Command-line argument count |
| * @argv: Array of command-line arguments |
| * |
| * Returns zero on success, CMD_RET_USAGE in case of misuse and negative |
| * on error. |
| */ |
| static int do_dek_blob(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| uint32_t src_addr, dst_addr, len; |
| |
| if (argc != 4) |
| return CMD_RET_USAGE; |
| |
| src_addr = simple_strtoul(argv[1], NULL, 16); |
| dst_addr = simple_strtoul(argv[2], NULL, 16); |
| len = simple_strtoul(argv[3], NULL, 10); |
| |
| return blob_encap_dek(src_addr, dst_addr, len); |
| } |
| |
| /***************************************************/ |
| static char dek_blob_help_text[] = |
| "src dst len - Encapsulate and create blob of data\n" |
| " $len bits long at address $src and\n" |
| " store the result at address $dst.\n"; |
| |
| U_BOOT_CMD( |
| dek_blob, 4, 1, do_dek_blob, |
| "Data Encryption Key blob encapsulation", |
| dek_blob_help_text |
| ); |