| // SPDX-License-Identifier: GPL-2.0 |
| /dts-v1/; |
| |
| /* This dts file describes the HTC One X smartphone */ |
| /* CPU Speedo ID 4, Soc Speedo ID 1, CPU Process: 1, Core Process: 0 */ |
| |
| #include <dt-bindings/input/input.h> |
| |
| #include "tegra30.dtsi" |
| |
| / { |
| model = "HTC One X"; |
| compatible = "htc,endeavoru", "nvidia,tegra30"; |
| |
| chosen { |
| stdout-path = &uarta; |
| }; |
| |
| aliases { |
| i2c0 = &pwr_i2c; |
| |
| mmc0 = &sdmmc4; /* eMMC */ |
| |
| rtc0 = &pmic; |
| rtc1 = "/rtc@7000e000"; |
| |
| usb0 = µ_usb; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x80000000 0x40000000>; |
| }; |
| |
| host1x@50000000 { |
| dc@54200000 { |
| clocks = <&tegra_car TEGRA30_CLK_DISP1>, |
| <&tegra_car TEGRA30_CLK_PLL_D_OUT0>; |
| |
| rgb { |
| status = "okay"; |
| |
| nvidia,panel = <&dsia>; |
| }; |
| }; |
| |
| dsia: dsi@54300000 { |
| status = "okay"; |
| |
| avdd-dsi-csi-supply = <&avdd_dsi_csi>; |
| |
| panel = <&panel>; |
| }; |
| }; |
| |
| uarta: serial@70006000 { |
| status = "okay"; |
| }; |
| |
| pwr_i2c: i2c@7000d000 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| |
| /* Texas Instruments TPS80032 PMIC */ |
| pmic: tps80032@48 { |
| compatible = "ti,tps80032"; |
| reg = <0x48>; |
| |
| regulators { |
| /* DSI VDD */ |
| avdd_dsi_csi: ldo1 { |
| regulator-name = "avdd_dsi_csi"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| sdmmc4: sdhci@78000600 { |
| status = "okay"; |
| bus-width = <8>; |
| non-removable; |
| }; |
| |
| micro_usb: usb@7d000000 { |
| status = "okay"; |
| dr_mode = "otg"; |
| }; |
| |
| backlight: backlight { |
| compatible = "nvidia,tegra-pwm-backlight"; |
| |
| nvidia,pwm-source = <1>; |
| nvidia,default-brightness = <0x8E>; |
| }; |
| |
| /* PMIC has a built-in 32KHz oscillator which is used by PMC */ |
| clk32k_in: clock-32k { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| clock-output-names = "pmic-oscillator"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| key-power { |
| label = "Power"; |
| gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_ENTER>; |
| }; |
| |
| key-volume-up { |
| label = "Volume Up"; |
| gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_UP>; |
| }; |
| |
| key-volume-down { |
| label = "Volume Down"; |
| gpios = <&gpio TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>; |
| linux,code = <KEY_DOWN>; |
| }; |
| }; |
| |
| panel: panel { |
| compatible = "htc,edge-panel"; |
| |
| reset-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>; |
| |
| vdd-supply = <&vdd_3v3_panel>; |
| vddio-supply = <&vdd_1v8_panel>; |
| |
| backlight = <&backlight>; |
| }; |
| |
| vcore_emmc: regulator-emmc { |
| compatible = "regulator-fixed"; |
| regulator-name = "vdd_2v85_sdmmc"; |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| gpio = <&gpio TEGRA_GPIO(M, 3) GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| vdd_3v3_panel: regulator-lcm { |
| compatible = "regulator-fixed"; |
| regulator-name = "v_lcm_3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio TEGRA_GPIO(E, 2) GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| vdd_1v8_panel: regulator-lcmio { |
| compatible = "regulator-fixed"; |
| regulator-name = "v_lcmio_1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| gpio = <&gpio TEGRA_GPIO(E, 5) GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |