| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device tree file for the Zyxel NSA 310S NAS box. |
| * |
| * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com> |
| * |
| * Based on |
| * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> |
| * Based upon the board setup file created by Peter Schildmann |
| */ |
| /dts-v1/; |
| |
| #include "kirkwood.dtsi" |
| #include "kirkwood-6281.dtsi" |
| |
| / { |
| model = "Zyxel NSA310S"; |
| compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood"; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| stdout-path = &uart0; |
| }; |
| |
| ocp@f1000000 { |
| pinctrl: pin-controller@10000 { |
| pinctrl-names = "default"; |
| |
| pmx_sata0: pmx-sata0 { |
| marvell,pins ; |
| marvell,function = "sata0"; |
| }; |
| |
| pmx_sata1: pmx-sata1 { |
| marvell,pins ; |
| marvell,function = "sata1"; |
| }; |
| |
| pmx_usb_power: pmx-usb-power { |
| marvell,pins = "mpp21"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_pwr_off: pmx-pwr-off { |
| marvell,pins = "mpp27"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_reset: pmx-btn-reset { |
| marvell,pins = "mpp24"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_copy: pmx-btn-copy { |
| marvell,pins = "mpp25"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_power: pmx-btn-power { |
| marvell,pins = "mpp26"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd2_green: pmx-led-hdd2-green { |
| marvell,pins = "mpp34"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd2_red: pmx-led-hdd2-red { |
| marvell,pins = "mpp12"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_usb_green: pmx-led-usb-green { |
| marvell,pins = "mpp15"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_copy_green: pmx-led-copy-green { |
| marvell,pins = "mpp22"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_copy_red: pmx-led-copy-red { |
| marvell,pins = "mpp23"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_sys_green: pmx-led-sys-green { |
| marvell,pins = "mpp28"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_sys_orange: pmx-led-sys-orange { |
| marvell,pins = "mpp29"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd1_green: pmx-led-hdd1-green { |
| marvell,pins = "mpp16"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd1_red: pmx-led-hdd1-red { |
| marvell,pins = "mpp13"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_pwr_sata1: pmx-pwr-sata1 { |
| marvell,pins = "mpp33"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| serial@12000 { |
| status = "ok"; |
| }; |
| |
| sata@80000 { |
| status = "okay"; |
| nr-ports = <1>; |
| }; |
| |
| rtc@10300 { |
| status = "disabled"; |
| }; |
| |
| i2c@11000 { |
| status = "okay"; |
| ht1382: rtc@68 { |
| compatible = "htk,ht1382"; |
| reg = <0x68>; |
| }; |
| }; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>; |
| |
| usb0_power: regulator@1 { |
| compatible = "regulator-fixed"; |
| reg = <1>; |
| regulator-name = "USB Power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| sata1_power: regulator@2 { |
| compatible = "regulator-fixed"; |
| reg = <2>; |
| regulator-name = "SATA1 Power"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| regulator-boot-on; |
| enable-active-high; |
| gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| gpio_poweroff { |
| compatible = "gpio-poweroff"; |
| pinctrl-0 = <&pmx_pwr_off>; |
| pinctrl-names = "default"; |
| gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; |
| pinctrl-names = "default"; |
| |
| button@1 { |
| label = "Power Button"; |
| linux,code = <KEY_POWER>; |
| gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; |
| }; |
| button@2 { |
| label = "Copy Button"; |
| linux,code = <KEY_COPY>; |
| gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; |
| }; |
| button@3 { |
| label = "Reset Button"; |
| linux,code = <KEY_RESTART>; |
| gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red |
| &pmx_led_usb_green |
| &pmx_led_sys_green &pmx_led_sys_orange |
| &pmx_led_copy_green &pmx_led_copy_red |
| &pmx_led_hdd1_green &pmx_led_hdd1_red>; |
| pinctrl-names = "default"; |
| |
| green-sys { |
| label = "nsa310s:green:sys"; |
| gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "default-on"; |
| }; |
| orange-sys { |
| label = "nsa310s:orange:sys"; |
| gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| }; |
| green-hdd1 { |
| label = "nsa310s:green:hdd1"; |
| gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; |
| }; |
| red-hdd1 { |
| label = "nsa310s:red:hdd1"; |
| gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| }; |
| green-hdd2 { |
| label = "nsa310s:green:hdd2"; |
| gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; |
| }; |
| red-hdd2 { |
| label = "nsa310s:red:hdd2"; |
| gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
| }; |
| green-usb { |
| label = "nsa310s:green:usb"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; |
| }; |
| green-copy { |
| label = "nsa310s:green:copy"; |
| gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "ide-disk"; |
| }; |
| red-copy { |
| label = "nsa310s:red:copy"; |
| gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| &nand { |
| status = "okay"; |
| chip-delay = <35>; |
| |
| partition@0 { |
| label = "uboot"; |
| reg = <0x0000000 0x0100000>; |
| }; |
| partition@100000 { |
| label = "stock_uboot_env"; |
| reg = <0x0100000 0x0080000>; |
| }; |
| partition@180000 { |
| label = "key_store"; |
| reg = <0x0180000 0x0080000>; |
| }; |
| partition@200000 { |
| label = "info"; |
| reg = <0x0200000 0x0080000>; |
| }; |
| partition@280000 { |
| label = "etc"; |
| reg = <0x0280000 0x0a00000>; |
| }; |
| partition@c80000 { |
| label = "kernel_1"; |
| reg = <0x0c80000 0x0a00000>; |
| }; |
| partition@1680000 { |
| label = "rootfs1"; |
| reg = <0x1680000 0x2fc0000>; |
| }; |
| partition@4640000 { |
| label = "kernel_2"; |
| reg = <0x4640000 0x0a00000>; |
| }; |
| partition@5040000 { |
| label = "rootfs2"; |
| reg = <0x5040000 0x2fc0000>; |
| }; |
| }; |
| |
| &mdio { |
| status = "okay"; |
| ethphy0: ethernet-phy@1 { |
| compatible = "marvell,88e1510"; |
| reg = <1>; |
| }; |
| }; |
| |
| ð0 { |
| status = "okay"; |
| ethernet0-port@0 { |
| phy-handle = <ðphy0>; |
| }; |
| }; |
| |
| &pciec { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| status = "okay"; |
| }; |