| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * SPL board functions for CompuLab CL-SOM-iMX7 module |
| * |
| * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com |
| * |
| * Author: Uri Mashiach <uri.mashiach@compulab.co.il> |
| */ |
| |
| #include <common.h> |
| #include <hang.h> |
| #include <init.h> |
| #include <spl.h> |
| #include <fsl_esdhc_imx.h> |
| #include <asm/mach-imx/iomux-v3.h> |
| #include <asm/arch-mx7/mx7-pins.h> |
| #include <asm/arch-mx7/clock.h> |
| #include <asm/arch-mx7/mx7-ddr.h> |
| #include <asm/sections.h> |
| #include "common.h" |
| |
| #ifdef CONFIG_FSL_ESDHC_IMX |
| |
| static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = { |
| USDHC1_BASE_ADDR, 0, 4}; |
| |
| int board_mmc_init(struct bd_info *bis) |
| { |
| cl_som_imx7_usdhc1_pads_set(); |
| cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); |
| return fsl_esdhc_initialize(bis, &cl_som_imx7_spl_usdhc_cfg); |
| } |
| #endif /* CONFIG_FSL_ESDHC_IMX */ |
| |
| static iomux_v3_cfg_t const led_pads[] = { |
| MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 | MUX_PAD_CTRL(PAD_CTL_PUS_PU5KOHM | |
| PAD_CTL_PUE | PAD_CTL_SRE_SLOW) |
| }; |
| |
| static struct ddrc cl_som_imx7_spl_ddrc_regs_val = { |
| .init1 = 0x00690000, |
| .init0 = 0x00020083, |
| .init3 = 0x09300004, |
| .init4 = 0x04080000, |
| .init5 = 0x00100004, |
| .rankctl = 0x0000033F, |
| .dramtmg1 = 0x0007020E, |
| .dramtmg2 = 0x03040407, |
| .dramtmg3 = 0x00002006, |
| .dramtmg4 = 0x04020305, |
| .dramtmg5 = 0x03030202, |
| .dramtmg8 = 0x00000803, |
| .zqctl0 = 0x00810021, |
| .dfitmg0 = 0x02098204, |
| .dfitmg1 = 0x00030303, |
| .dfiupd0 = 0x80400003, |
| .dfiupd1 = 0x00100020, |
| .dfiupd2 = 0x80100004, |
| .addrmap4 = 0x00000F0F, |
| .odtcfg = 0x06000604, |
| .odtmap = 0x00000001, |
| }; |
| |
| static struct ddrc_mp cl_som_imx7_spl_ddrc_mp_val = { |
| .pctrl_0 = 0x00000001, |
| }; |
| |
| static struct ddr_phy cl_som_imx7_spl_ddr_phy_regs_val = { |
| .phy_con0 = 0x17420F40, |
| .phy_con1 = 0x10210100, |
| .phy_con4 = 0x00060807, |
| .mdll_con0 = 0x1010007E, |
| .drvds_con0 = 0x00000D6E, |
| .cmd_sdll_con0 = 0x00000010, |
| .offset_lp_con0 = 0x0000000F, |
| }; |
| |
| struct mx7_calibration cl_som_imx7_spl_calib_param = { |
| .num_val = 5, |
| .values = { |
| 0x0E407304, |
| 0x0E447304, |
| 0x0E447306, |
| 0x0E447304, |
| 0x0E407304, |
| }, |
| }; |
| |
| static void cl_som_imx7_spl_dram_cfg_size(u32 ram_size) |
| { |
| switch (ram_size) { |
| case SZ_256M: |
| cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01041001; |
| cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046; |
| cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000014; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00151515; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x03030303; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F0F0303; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0C0C0C0C; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404; |
| break; |
| case SZ_512M: |
| cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001; |
| cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046; |
| cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000015; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00161616; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F0F0404; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0C0C0C0C; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404; |
| break; |
| case SZ_1G: |
| cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001; |
| cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x00400046; |
| cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E1109; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000016; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00171717; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x0F040404; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0A0A0A0A; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x02020202; |
| break; |
| case SZ_2G: |
| cl_som_imx7_spl_ddrc_regs_val.mstr = 0x01040001; |
| cl_som_imx7_spl_ddrc_regs_val.rfshtmg = 0x0040005E; |
| cl_som_imx7_spl_ddrc_regs_val.dramtmg0 = 0x090E110A; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap0 = 0x00000018; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap1 = 0x00181818; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap5 = 0x04040404; |
| cl_som_imx7_spl_ddrc_regs_val.addrmap6 = 0x04040404; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0 = 0x0A0A0A0A; |
| cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0 = 0x04040404; |
| break; |
| } |
| |
| mx7_dram_cfg(&cl_som_imx7_spl_ddrc_regs_val, |
| &cl_som_imx7_spl_ddrc_mp_val, |
| &cl_som_imx7_spl_ddr_phy_regs_val, |
| &cl_som_imx7_spl_calib_param); |
| } |
| |
| static void cl_som_imx7_spl_dram_cfg(void) |
| { |
| ulong ram_size_test, ram_size = 0; |
| |
| for (ram_size = SZ_2G; ram_size >= SZ_256M; ram_size >>= 1) { |
| cl_som_imx7_spl_dram_cfg_size(ram_size); |
| ram_size_test = get_ram_size((long int *)PHYS_SDRAM, ram_size); |
| if (ram_size_test == ram_size) |
| break; |
| } |
| |
| if (ram_size < SZ_256M) { |
| puts("!!!ERROR!!! DRAM detection failed!!!\n"); |
| hang(); |
| } |
| } |
| |
| #ifdef CONFIG_SPL_SPI |
| |
| static void cl_som_imx7_spl_spi_init(void) |
| { |
| cl_som_imx7_espi1_pads_set(); |
| } |
| #else /* !CONFIG_SPL_SPI */ |
| static void cl_som_imx7_spl_spi_init(void) {} |
| #endif /* CONFIG_SPL_SPI */ |
| |
| void board_init_f(ulong dummy) |
| { |
| imx_iomux_v3_setup_multiple_pads(led_pads, 1); |
| /* setup AIPS and disable watchdog */ |
| arch_cpu_init(); |
| /* setup GP timer */ |
| timer_init(); |
| cl_som_imx7_spl_spi_init(); |
| cl_som_imx7_uart1_pads_set(); |
| /* UART clocks enabled and gd valid - init serial console */ |
| preloader_console_init(); |
| /* DRAM detection */ |
| cl_som_imx7_spl_dram_cfg(); |
| /* Clear the BSS. */ |
| memset(__bss_start, 0, __bss_end - __bss_start); |
| /* load/boot image from boot device */ |
| board_init_r(NULL, 0); |
| } |
| |
| void spl_board_init(void) |
| { |
| u32 boot_device = spl_boot_device(); |
| |
| if (boot_device == BOOT_DEVICE_SPI) |
| puts("Booting from SPI flash\n"); |
| else if (boot_device == BOOT_DEVICE_MMC1) |
| puts("Booting from SD card\n"); |
| else |
| puts("Unknown boot device\n"); |
| } |
| |
| void board_boot_order(u32 *spl_boot_list) |
| { |
| spl_boot_list[0] = spl_boot_device(); |
| switch (spl_boot_list[0]) { |
| case BOOT_DEVICE_SPI: |
| spl_boot_list[1] = BOOT_DEVICE_MMC1; |
| break; |
| case BOOT_DEVICE_MMC1: |
| spl_boot_list[1] = BOOT_DEVICE_SPI; |
| break; |
| } |
| } |