| config CHAIN_OF_TRUST |
| depends on !FIT_SIGNATURE && NXP_ESBC |
| imply CMD_BLOB |
| imply CMD_HASH if ARM |
| select FSL_CAAM |
| select ARCH_MISC_INIT |
| select SPL_BOARD_INIT if (ARM && SPL) |
| select SPL_HASH if (ARM && SPL) |
| select SHA_HW_ACCEL |
| select SHA_PROG_HW_ACCEL |
| select ENV_IS_NOWHERE |
| select CMD_EXT4 if ARM |
| select CMD_EXT4_WRITE if ARM |
| bool |
| default y |
| |
| config CMD_ESBC_VALIDATE |
| bool "Enable the 'esbc_validate' and 'esbc_halt' commands" |
| depends on CHAIN_OF_TRUST |
| default y |
| help |
| This option enables two commands used for secure booting: |
| |
| esbc_validate - validate signature using RSA verification |
| esbc_halt - put the core in spin loop (Secure Boot Only) |
| |
| config ESBC_HDR_LS |
| bool |
| |
| config ESBC_ADDR_64BIT |
| def_bool y |
| depends on ESBC_HDR_LS && FSL_LAYERSCAPE |
| help |
| For Layerscape based platforms, ESBC image Address in Header is 64bit. |
| |
| config DEEP_SLEEP |
| bool "Enable SoC deep sleep feature" |
| depends on ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || ARCH_LS1021A |
| default y |
| help |
| Indicates this SoC supports deep sleep feature. If deep sleep is |
| supported, core will start to execute uboot when wakes up. |
| |
| config FSL_USE_PCA9547_MUX |
| bool "Enable PCA9547 I2C Mux on Freescale boards" |
| depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 |
| help |
| This option enables the PCA9547 I2C mux on Freescale boards. |
| |
| config VID |
| bool "Enable Freescale VID" |
| depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (I2C || DM_I2C) |
| help |
| This option enables setting core voltage based on individual |
| values saved in SoC fuses. |
| |
| config SPL_VID |
| bool "Enable Freescale VID in SPL" |
| depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (SPL_I2C || DM_SPL_I2C) |
| help |
| This option enables setting core voltage based on individual |
| values saved in SoC fuses, in SPL. |
| |
| if VID || SPL_VID |
| |
| config VID_FLS_ENV |
| string "Environment variable for overriding VDD" |
| help |
| This option allows for specifying the environment variable |
| to check to override VDD information. |
| |
| config VOL_MONITOR_INA220 |
| bool "Enable the INA220 voltage monitor read" |
| help |
| This option enables INA220 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_IR36021_READ |
| bool "Enable the IR36021 voltage monitor read" |
| help |
| This option enables IR36021 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_IR36021_SET |
| bool "Enable the IR36021 voltage monitor set" |
| help |
| This option enables IR36021 voltage monitor set |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_LTC3882_READ |
| bool "Enable the LTC3882 voltage monitor read" |
| help |
| This option enables LTC3882 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_LTC3882_SET |
| bool "Enable the LTC3882 voltage monitor set" |
| help |
| This option enables LTC3882 voltage monitor set |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_ISL68233_READ |
| bool "Enable the ISL68233 voltage monitor read" |
| help |
| This option enables ISL68233 voltage monitor read |
| functionality. It is used by the common VID driver. |
| |
| config VOL_MONITOR_ISL68233_SET |
| bool "Enable the ISL68233 voltage monitor set" |
| help |
| This option enables ISL68233 voltage monitor set |
| functionality. It is used by the common VID driver. |
| |
| endif |
| |
| config FSL_QIXIS |
| bool "Enable QIXIS support" |
| depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 |
| |
| config QIXIS_I2C_ACCESS |
| bool "Access to QIXIS is over i2c" |
| depends on FSL_QIXIS |
| default y |
| |
| config HAS_FSL_DR_USB |
| def_bool y |
| depends on USB_EHCI_HCD && PPC |