| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * https://beagleboard.org/ai-64 |
| * |
| * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ |
| * Copyright (C) 2022 Jason Kridner, BeagleBoard.org Foundation |
| * Copyright (C) 2022-2023 Robert Nelson, BeagleBoard.org Foundation |
| */ |
| |
| #include "k3-binman.dtsi" |
| |
| / { |
| memory@80000000 { |
| bootph-all; |
| }; |
| |
| /* Keep the LEDs on by default to indicate life */ |
| leds { |
| bootph-all; |
| led-0 { |
| default-state = "on"; |
| bootph-all; |
| }; |
| |
| led-1 { |
| default-state = "on"; |
| bootph-all; |
| }; |
| |
| led-2 { |
| default-state = "on"; |
| bootph-all; |
| }; |
| |
| led-3 { |
| default-state = "on"; |
| bootph-all; |
| }; |
| |
| led-4 { |
| default-state = "on"; |
| bootph-all; |
| }; |
| }; |
| }; |
| |
| &cbass_main { |
| bootph-all; |
| }; |
| |
| &main_navss { |
| bootph-all; |
| }; |
| |
| &cbass_mcu_wakeup { |
| bootph-all; |
| |
| chipid@43000014 { |
| bootph-all; |
| }; |
| }; |
| |
| &mcu_navss { |
| bootph-all; |
| }; |
| |
| &mcu_ringacc { |
| reg = <0x0 0x2b800000 0x0 0x400000>, |
| <0x0 0x2b000000 0x0 0x400000>, |
| <0x0 0x28590000 0x0 0x100>, |
| <0x0 0x2a500000 0x0 0x40000>, |
| <0x0 0x28440000 0x0 0x40000>; |
| reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; |
| bootph-all; |
| }; |
| |
| &mcu_udmap { |
| reg = <0x0 0x285c0000 0x0 0x100>, |
| <0x0 0x284c0000 0x0 0x4000>, |
| <0x0 0x2a800000 0x0 0x40000>, |
| <0x0 0x284a0000 0x0 0x4000>, |
| <0x0 0x2aa00000 0x0 0x40000>, |
| <0x0 0x28400000 0x0 0x2000>; |
| reg-names = "gcfg", "rchan", "rchanrt", "tchan", |
| "tchanrt", "rflow"; |
| bootph-all; |
| }; |
| |
| &secure_proxy_main { |
| bootph-all; |
| }; |
| |
| &dmsc { |
| bootph-all; |
| k3_sysreset: sysreset-controller { |
| compatible = "ti,sci-sysreset"; |
| bootph-all; |
| }; |
| }; |
| |
| &k3_pds { |
| bootph-all; |
| }; |
| |
| &k3_clks { |
| bootph-all; |
| }; |
| |
| &k3_reset { |
| bootph-all; |
| }; |
| |
| &wkup_pmx0 { |
| bootph-all; |
| }; |
| |
| &main_pmx0 { |
| bootph-all; |
| }; |
| |
| &main_uart0 { |
| bootph-all; |
| }; |
| |
| &main_gpio0 { |
| bootph-all; |
| }; |
| |
| &main_uart0_pins_default { |
| bootph-all; |
| }; |
| |
| &main_sdhci0 { |
| bootph-all; |
| }; |
| |
| &main_sdhci1 { |
| bootph-all; |
| sdhci-caps-mask = <0x00000007 0x00000000>; |
| /delete-property/ cd-gpios; |
| /delete-property/ cd-debounce-delay-ms; |
| /delete-property/ ti,fails-without-test-cd; |
| /delete-property/ no-1-8-v; |
| }; |
| |
| &main_mmc1_pins_default { |
| bootph-all; |
| }; |
| |
| &mcu_cpsw { |
| bootph-all; |
| }; |
| |
| &davinci_mdio { |
| bootph-all; |
| }; |
| |
| &phy0 { |
| bootph-all; |
| }; |
| |
| &serdes2 { |
| bootph-all; |
| }; |
| |
| &serdes_ln_ctrl { |
| bootph-all; |
| }; |
| |
| &serdes2_usb_link { |
| bootph-all; |
| }; |
| |
| &usb_serdes_mux { |
| bootph-all; |
| }; |
| |
| &serdes_wiz2 { |
| bootph-all; |
| }; |
| |
| &main_usbss1_pins_default { |
| bootph-all; |
| }; |
| |
| &mcu_usbss1_pins_default { |
| bootph-all; |
| }; |
| |
| &usbss1 { |
| bootph-all; |
| }; |
| |
| &usb1 { |
| bootph-all; |
| }; |
| |
| &wkup_i2c0_pins_default { |
| bootph-all; |
| }; |
| |
| &wkup_i2c0 { |
| bootph-all; |
| }; |
| |
| #ifdef CONFIG_TARGET_J721E_A72_BEAGLEBONEAI64 |
| |
| #define SPL_NODTB "spl/u-boot-spl-nodtb.bin" |
| #define SPL_J721E_BBAI64_DTB "spl/dts/k3-j721e-beagleboneai64.dtb" |
| |
| #define UBOOT_NODTB "u-boot-nodtb.bin" |
| #define J721E_BBAI64_DTB "arch/arm/dts/k3-j721e-beagleboneai64.dtb" |
| |
| &binman { |
| ti-dm { |
| filename = "ti-dm.bin"; |
| blob-ext { |
| filename = "ti-dm/j721e/ipc_echo_testb_mcu1_0_release_strip.xer5f"; |
| }; |
| }; |
| |
| ti-spl_unsigned { |
| filename = "tispl.bin_unsigned"; |
| pad-byte = <0xff>; |
| |
| fit { |
| description = "Configuration to load ATF and SPL"; |
| #address-cells = <1>; |
| |
| images { |
| |
| atf { |
| description = "ARM Trusted Firmware"; |
| type = "firmware"; |
| arch = "arm64"; |
| compression = "none"; |
| os = "arm-trusted-firmware"; |
| load = <CONFIG_K3_ATF_LOAD_ADDR>; |
| entry = <CONFIG_K3_ATF_LOAD_ADDR>; |
| atf-bl31 { |
| filename = "bl31.bin"; |
| }; |
| }; |
| |
| tee { |
| description = "OP-TEE"; |
| type = "tee"; |
| arch = "arm64"; |
| compression = "none"; |
| os = "tee"; |
| load = <0x9e800000>; |
| entry = <0x9e800000>; |
| tee-os { |
| filename = "tee-raw.bin"; |
| }; |
| }; |
| |
| dm { |
| description = "DM binary"; |
| type = "firmware"; |
| arch = "arm32"; |
| compression = "none"; |
| os = "DM"; |
| load = <0x89000000>; |
| entry = <0x89000000>; |
| blob-ext { |
| filename = "ti-dm.bin"; |
| }; |
| }; |
| |
| spl { |
| description = "SPL (64-bit)"; |
| type = "standalone"; |
| os = "U-Boot"; |
| arch = "arm64"; |
| compression = "none"; |
| load = <CONFIG_SPL_TEXT_BASE>; |
| entry = <CONFIG_SPL_TEXT_BASE>; |
| blob-ext { |
| filename = SPL_NODTB; |
| }; |
| }; |
| |
| fdt-0 { |
| description = "k3-j721e-beagleboneai64"; |
| type = "flat_dt"; |
| arch = "arm"; |
| compression = "none"; |
| blob { |
| filename = SPL_J721E_BBAI64_DTB; |
| }; |
| }; |
| }; |
| |
| configurations { |
| default = "conf-0"; |
| |
| conf-0 { |
| description = "k3-j721e-beagleboneai64"; |
| firmware = "atf"; |
| loadables = "tee", "dm", "spl"; |
| fdt = "fdt-0"; |
| }; |
| }; |
| }; |
| }; |
| |
| u-boot_unsigned { |
| filename = "u-boot.img_unsigned"; |
| pad-byte = <0xff>; |
| |
| fit { |
| description = "FIT image with multiple configurations"; |
| |
| images { |
| uboot { |
| description = "U-Boot for j721e board"; |
| type = "firmware"; |
| os = "u-boot"; |
| arch = "arm"; |
| compression = "none"; |
| load = <CONFIG_TEXT_BASE>; |
| blob { |
| filename = UBOOT_NODTB; |
| }; |
| hash { |
| algo = "crc32"; |
| }; |
| }; |
| |
| fdt-0 { |
| description = "k3-j721e-beagleboneai64"; |
| type = "flat_dt"; |
| arch = "arm"; |
| compression = "none"; |
| blob { |
| filename = J721E_BBAI64_DTB; |
| }; |
| hash { |
| algo = "crc32"; |
| }; |
| }; |
| }; |
| |
| configurations { |
| default = "conf-0"; |
| |
| conf-0 { |
| description = "k3-j721e-beagleboneai64"; |
| firmware = "uboot"; |
| loadables = "uboot"; |
| fdt = "fdt-0"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| #endif |