| /* |
| * MOUSSE/MPC8240 Board definitions. |
| * Flash Routines for MOUSSE onboard AMD29LV106DB devices |
| * |
| * (C) Copyright 2000 |
| * Marius Groeger <mgroeger@sysgo.de> |
| * Sysgo Real-Time Solutions, GmbH <www.elinos.com> |
| * |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp. |
| * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc8xx.h> |
| #include <malloc.h> |
| #include "mousse.h" |
| #include "flash.h" |
| |
| int flashLibDebug = 0; |
| int flashLibInited = 0; |
| |
| #define OK 0 |
| #define ERROR -1 |
| #define STATUS int |
| #define PRINTF if (flashLibDebug) printf |
| #if 0 |
| #define PRIVATE static |
| #else |
| #define PRIVATE |
| #endif |
| |
| flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; |
| |
| #define SLEEP_DELAY 166 |
| #define FLASH_SECTOR_SIZE (64*1024) |
| /*********************************************************************** |
| * |
| * Virtual Flash Devices on Mousse board |
| * |
| * These must be kept in sync with the definitions in flashLib.h. |
| * |
| ***********************************************************************/ |
| |
| PRIVATE flash_dev_t flashDev[] = { |
| /* Bank 0 sector SA0 (16 kB) */ |
| { "SA0",FLASH0_BANK, FLASH0_SEG0_START, 1, 14, |
| FLASH0_VENDOR_ID, FLASH0_DEVICE_ID |
| }, |
| /* Bank 0 sector SA1 (8 kB) */ |
| { "SA1", FLASH0_BANK, FLASH0_SEG0_START + 0x4000, 1, 13, |
| FLASH0_VENDOR_ID, FLASH0_DEVICE_ID |
| }, |
| /* Bank 0 sector SA2 (8 kB) */ |
| { "SA2", FLASH0_BANK, FLASH0_SEG0_START + 0x6000, 1, 13, |
| FLASH0_VENDOR_ID, FLASH0_DEVICE_ID |
| }, |
| /* Bank 0 sector SA3 is occluded by Mousse I/O devices */ |
| /* Bank 0 sectors SA4-SA18, after Mousse devices up to PLCC (960 kB) */ |
| { "KERNEL", FLASH0_BANK, FLASH0_SEG1_START, 15, 16, |
| FLASH0_VENDOR_ID, FLASH0_DEVICE_ID |
| }, |
| /* Bank 0 sectors SA19-SA26, jumper can occlude this by PLCC (512 kB) */ |
| /* This is where the Kahlua boot vector and boot ROM code resides. */ |
| { "BOOT",FLASH0_BANK, FLASH0_SEG2_START, 8, 16, |
| FLASH0_VENDOR_ID, FLASH0_DEVICE_ID |
| }, |
| /* Bank 0 sectors SA27-SA34 (512 kB) */ |
| { "RAMDISK",FLASH0_BANK, FLASH0_SEG3_START, 8, 16, |
| FLASH0_VENDOR_ID, FLASH0_DEVICE_ID |
| }, |
| }; |
| |
| int flashDevCount = (sizeof (flashDev) / sizeof (flashDev[0])); |
| |
| #define DEV(no) (&flashDev[no]) |
| #define DEV_NO(dev) ((dev) - flashDev) |
| |
| /*********************************************************************** |
| * |
| * Private Flash Routines |
| * |
| ***********************************************************************/ |
| |
| /* |
| * The convention is: |
| * |
| * "addr" is always the PROM raw address, which is the address of an |
| * 8-bit quantity for flash 0 and 16-bit quantity for flash 1. |
| * |
| * "pos" is always a logical byte position from the PROM beginning. |
| */ |
| |
| #define FLASH0_ADDR(dev, addr) \ |
| ((unsigned char *) ((dev)->base + (addr))) |
| |
| #define FLASH0_WRITE(dev, addr, value) \ |
| (*FLASH0_ADDR(dev, addr) = (value)) |
| |
| #define FLASH0_READ(dev, addr) \ |
| (*FLASH0_ADDR(dev, addr)) |
| |
| PRIVATE int flashCheck(flash_dev_t *dev) |
| { |
| if (! flashLibInited) { |
| printf("flashCheck: flashLib not initialized\n"); |
| return ERROR; |
| } |
| |
| if (dev < &flashDev[0] || dev >= &flashDev[flashDevCount]) { |
| printf("flashCheck: Bad dev parameter\n"); |
| return ERROR; |
| } |
| |
| if (! dev->found) { |
| printf("flashCheck: Device %d not available\n", DEV_NO(dev)); |
| return ERROR; |
| } |
| |
| return OK; |
| } |
| |
| PRIVATE void flashReset(flash_dev_t *dev) |
| { |
| PRINTF("flashReset: dev=%d\n", DEV_NO(dev)); |
| |
| if (dev->bank == FLASH0_BANK) { |
| FLASH0_WRITE(dev, 0x555, 0xaa); |
| FLASH0_WRITE(dev, 0xaaa, 0x55); |
| FLASH0_WRITE(dev, 0x555, 0xf0); |
| } |
| |
| udelay(SLEEP_DELAY); |
| |
| PRINTF("flashReset: done\n"); |
| } |
| |
| PRIVATE int flashProbe(flash_dev_t *dev) |
| { |
| int rv, deviceID, vendorID; |
| |
| PRINTF("flashProbe: dev=%d\n", DEV_NO(dev)); |
| |
| if (dev->bank != FLASH0_BANK) { |
| rv = ERROR; |
| goto DONE; |
| } |
| |
| FLASH0_WRITE(dev, 0xaaa, 0xaa); |
| FLASH0_WRITE(dev, 0x555, 0x55); |
| FLASH0_WRITE(dev, 0xaaa, 0x90); |
| |
| udelay(SLEEP_DELAY); |
| |
| vendorID = FLASH0_READ(dev, 0); |
| deviceID = FLASH0_READ(dev, 2); |
| |
| FLASH0_WRITE(dev, 0, 0xf0); |
| |
| PRINTF("flashProbe: vendor=0x%x device=0x%x\n", vendorID, deviceID); |
| |
| if (vendorID == dev->vendorID && deviceID == dev->deviceID) |
| rv = OK; |
| else |
| rv = ERROR; |
| |
| DONE: |
| PRINTF("flashProbe: rv=%d\n", rv); |
| |
| return rv; |
| } |
| |
| PRIVATE int flashWait(flash_dev_t *dev, int addr, int expect, int erase) |
| { |
| int rv = ERROR; |
| int i, data; |
| int polls; |
| #if 0 |
| PRINTF("flashWait: dev=%d addr=0x%x expect=0x%x erase=%d\n", |
| DEV_NO(dev), addr, expect, erase); |
| #endif |
| |
| if (dev->bank != FLASH0_BANK) { |
| rv = ERROR; |
| goto done; |
| } |
| |
| if (erase) |
| polls = FLASH_ERASE_SECTOR_TIMEOUT; /* Ticks */ |
| else |
| polls = FLASH_PROGRAM_POLLS; /* Loops */ |
| |
| for (i = 0; i < polls; i++) { |
| if (erase) |
| udelay(SLEEP_DELAY); |
| |
| data = FLASH0_READ(dev, addr); |
| |
| if (((data ^ expect) & 0x80) == 0) { |
| rv = OK; |
| goto done; |
| } |
| |
| if (data & 0x20) { |
| /* |
| * If the 0x20 bit has come on, it could actually be because |
| * the operation succeeded, so check the done bit again. |
| */ |
| |
| data = FLASH0_READ(dev, addr); |
| |
| if (((data ^ expect) & 0x80) == 0) { |
| rv = OK; |
| goto done; |
| } |
| |
| printf("flashWait: Program error (dev: %d, addr: 0x%x)\n", |
| DEV_NO(dev), addr); |
| |
| flashReset(dev); |
| rv = ERROR; |
| goto done; |
| } |
| } |
| |
| printf("flashWait: Timeout %s (dev: %d, addr: 0x%x)\n", |
| erase ? "erasing sector" : "programming byte", |
| DEV_NO(dev), addr); |
| |
| done: |
| |
| #if 0 |
| PRINTF("flashWait: rv=%d\n", rv); |
| #endif |
| |
| return rv; |
| } |
| |
| /*********************************************************************** |
| * |
| * Public Flash Routines |
| * |
| ***********************************************************************/ |
| |
| STATUS flashLibInit(void) |
| { |
| int i; |
| |
| PRINTF("flashLibInit: devices=%d\n", flashDevCount); |
| |
| for (i = 0; i < flashDevCount; i++) { |
| flash_dev_t *dev = &flashDev[i]; |
| /* |
| * For bank 1, probe both without and with byte swappage, |
| * so that this module works on both old and new Mousse boards. |
| */ |
| |
| flashReset(dev); |
| |
| if (flashProbe(dev) != ERROR) |
| dev->found = 1; |
| |
| flashReset(dev); |
| |
| if (flashProbe(dev) != ERROR) |
| dev->found = 1; |
| |
| dev->swap = 0; |
| |
| if(dev->found){ |
| PRINTF("\n FLASH %s[%d]: iobase=0x%x - %d sectors %d KB", |
| flashDev[i].name,i,flashDev[i].base, flashDev[i].sectors, |
| (flashDev[i].sectors * FLASH_SECTOR_SIZE)/1024); |
| |
| } |
| } |
| |
| flashLibInited = 1; |
| |
| PRINTF("flashLibInit: done\n"); |
| |
| return OK; |
| } |
| |
| STATUS flashEraseSector(flash_dev_t *dev, int sector) |
| { |
| int pos, addr; |
| |
| PRINTF("flashErasesector: dev=%d sector=%d\n", DEV_NO(dev), sector); |
| |
| if (flashCheck(dev) == ERROR) |
| return ERROR; |
| |
| if (sector < 0 || sector >= dev->sectors) { |
| printf("flashEraseSector: Sector out of range (dev: %d, sector: %d)\n", |
| DEV_NO(dev), sector); |
| return ERROR; |
| } |
| |
| pos = FLASH_SECTOR_POS(dev, sector); |
| |
| if (dev->bank != FLASH0_BANK) { |
| return ERROR; |
| } |
| |
| addr = pos; |
| |
| FLASH0_WRITE(dev, 0xaaa, 0xaa); |
| FLASH0_WRITE(dev, 0x555, 0x55); |
| FLASH0_WRITE(dev, 0xaaa, 0x80); |
| FLASH0_WRITE(dev, 0xaaa, 0xaa); |
| FLASH0_WRITE(dev, 0x555, 0x55); |
| FLASH0_WRITE(dev, addr, 0x30); |
| |
| return flashWait(dev, addr, 0xff, 1); |
| } |
| |
| /* |
| * Note: it takes about as long to flash all sectors together with Chip |
| * Erase as it does to flash them one at a time (about 30 seconds for 2 |
| * MB). Also since we want to be able to treat subsets of sectors as if |
| * they were complete devices, we don't use Chip Erase. |
| */ |
| |
| STATUS flashErase(flash_dev_t *dev) |
| { |
| int sector; |
| |
| PRINTF("flashErase: dev=%d sectors=%d\n", DEV_NO(dev), dev->sectors); |
| |
| if (flashCheck(dev) == ERROR) |
| return ERROR; |
| |
| for (sector = 0; sector < dev->sectors; sector++) { |
| if (flashEraseSector(dev, sector) == ERROR) |
| return ERROR; |
| } |
| return OK; |
| } |
| |
| /* |
| * Read and write bytes |
| */ |
| |
| STATUS flashRead(flash_dev_t *dev, int pos, char *buf, int len) |
| { |
| int addr, words; |
| |
| PRINTF("flashRead: dev=%d pos=0x%x buf=0x%x len=0x%x\n", |
| DEV_NO(dev), pos, (int) buf, len); |
| |
| if (flashCheck(dev) == ERROR) |
| return ERROR; |
| |
| if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS(dev)) { |
| printf("flashRead: Position out of range " |
| "(dev: %d, pos: 0x%x, len: 0x%x)\n", |
| DEV_NO(dev), pos, len); |
| return ERROR; |
| } |
| |
| if (len == 0) |
| return OK; |
| |
| if (dev->bank == FLASH0_BANK) { |
| addr = pos; |
| words = len; |
| |
| PRINTF("flashRead: memcpy(0x%x, 0x%x, 0x%x)\n", |
| (int) buf, (int) FLASH0_ADDR(dev, pos), len); |
| |
| memcpy(buf, FLASH0_ADDR(dev, addr), words); |
| |
| } |
| PRINTF("flashRead: rv=OK\n"); |
| |
| return OK; |
| } |
| |
| STATUS flashWrite(flash_dev_t *dev, int pos, char *buf, int len) |
| { |
| int addr, words; |
| |
| PRINTF("flashWrite: dev=%d pos=0x%x buf=0x%x len=0x%x\n", |
| DEV_NO(dev), pos, (int) buf, len); |
| |
| if (flashCheck(dev) == ERROR) |
| return ERROR; |
| |
| if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS(dev)) { |
| printf("flashWrite: Position out of range " |
| "(dev: %d, pos: 0x%x, len: 0x%x)\n", |
| DEV_NO(dev), pos, len); |
| return ERROR; |
| } |
| |
| if (len == 0) |
| return OK; |
| |
| if (dev->bank == FLASH0_BANK) { |
| unsigned char tmp; |
| |
| addr = pos; |
| words = len; |
| |
| while (words--) { |
| tmp = *buf; |
| if (~FLASH0_READ(dev, addr) & tmp) { |
| printf("flashWrite: Attempt to program 0 to 1 " |
| "(dev: %d, addr: 0x%x, data: 0x%x)\n", |
| DEV_NO(dev), addr, tmp); |
| return ERROR; |
| } |
| FLASH0_WRITE(dev, 0xaaa, 0xaa); |
| FLASH0_WRITE(dev, 0x555, 0x55); |
| FLASH0_WRITE(dev, 0xaaa, 0xa0); |
| FLASH0_WRITE(dev, addr, tmp); |
| if (flashWait(dev, addr, tmp, 0) < 0) |
| return ERROR; |
| buf++; |
| addr++; |
| } |
| } |
| |
| PRINTF("flashWrite: rv=OK\n"); |
| |
| return OK; |
| } |
| |
| /* |
| * flashWritable returns TRUE if a range contains all F's. |
| */ |
| |
| STATUS flashWritable(flash_dev_t *dev, int pos, int len) |
| { |
| int addr, words; |
| int rv = ERROR; |
| |
| PRINTF("flashWritable: dev=%d pos=0x%x len=0x%x\n", |
| DEV_NO(dev), pos, len); |
| |
| if (flashCheck(dev) == ERROR) |
| goto done; |
| |
| if (pos < 0 || len < 0 || pos + len > FLASH_MAX_POS(dev)) { |
| printf("flashWritable: Position out of range " |
| "(dev: %d, pos: 0x%x, len: 0x%x)\n", |
| DEV_NO(dev), pos, len); |
| goto done; |
| } |
| |
| if (len == 0) { |
| rv = 1; |
| goto done; |
| } |
| |
| if (dev->bank == FLASH0_BANK) { |
| addr = pos; |
| words = len; |
| |
| while (words--) { |
| if (FLASH0_READ(dev, addr) != 0xff) { |
| rv = 0; |
| goto done; |
| } |
| addr++; |
| } |
| } |
| |
| rv = 1; |
| |
| done: |
| PRINTF("flashWrite: rv=%d\n", rv); |
| return rv; |
| } |
| |
| |
| /* |
| * NOTE: the below code cannot run from FLASH!!! |
| */ |
| /*********************************************************************** |
| * |
| * Flash Diagnostics |
| * |
| ***********************************************************************/ |
| |
| STATUS flashDiag(flash_dev_t *dev) |
| { |
| unsigned int *buf = 0; |
| int i, len, sector; |
| int rv = ERROR; |
| |
| if (flashCheck(dev) == ERROR) |
| return ERROR; |
| |
| printf("flashDiag: Testing device %d, " |
| "base: 0x%x, %d sectors @ %d kB = %d kB\n", |
| DEV_NO(dev), dev->base, |
| dev->sectors, |
| 1 << (dev->lgSectorSize - 10), |
| dev->sectors << (dev->lgSectorSize - 10)); |
| |
| len = 1 << dev->lgSectorSize; |
| |
| printf("flashDiag: Erasing\n"); |
| |
| if (flashErase(dev) == ERROR) { |
| printf("flashDiag: Erase failed\n"); |
| goto done; |
| } |
| printf("%d bytes requested ...\n", len); |
| buf = malloc(len); |
| printf("allocated %d bytes ...\n", len); |
| if (buf == 0) { |
| printf("flashDiag: Out of memory\n"); |
| goto done; |
| } |
| |
| /* |
| * Write unique counting pattern to each sector |
| */ |
| |
| for (sector = 0; sector < dev->sectors; sector++) { |
| printf("flashDiag: Write sector %d\n", sector); |
| |
| for (i = 0; i < len / 4; i++) |
| buf[i] = sector << 24 | i; |
| |
| if (flashWrite(dev, |
| sector << dev->lgSectorSize, |
| (char *) buf, |
| len) == ERROR) { |
| printf("flashDiag: Write failed (dev: %d, sector: %d)\n", |
| DEV_NO(dev), sector); |
| goto done; |
| } |
| } |
| |
| /* |
| * Verify |
| */ |
| |
| for (sector = 0; sector < dev->sectors; sector++) { |
| printf("flashDiag: Verify sector %d\n", sector); |
| |
| if (flashRead(dev, |
| sector << dev->lgSectorSize, |
| (char *) buf, |
| len) == ERROR) { |
| printf("flashDiag: Read failed (dev: %d, sector: %d)\n", |
| DEV_NO(dev), sector); |
| goto done; |
| } |
| |
| for (i = 0; i < len / 4; i++) { |
| if (buf[i] != (sector << 24 | i)) { |
| printf("flashDiag: Verify error " |
| "(dev: %d, sector: %d, offset: 0x%x)\n", |
| DEV_NO(dev), sector, i); |
| printf("flashDiag: Expected 0x%08x, got 0x%08x\n", |
| sector << 24 | i, buf[i]); |
| |
| goto done; |
| } |
| } |
| } |
| |
| printf("flashDiag: Erasing\n"); |
| |
| if (flashErase(dev) == ERROR) { |
| printf("flashDiag: Final erase failed\n"); |
| goto done; |
| } |
| |
| rv = OK; |
| |
| done: |
| if (buf) |
| free(buf); |
| |
| if (rv == OK) |
| printf("flashDiag: Device %d passed\n", DEV_NO(dev)); |
| else |
| printf("flashDiag: Device %d failed\n", DEV_NO(dev)); |
| |
| return rv; |
| } |
| |
| STATUS flashDiagAll(void) |
| { |
| int i; |
| int rv = OK; |
| |
| PRINTF("flashDiagAll: devices=%d\n", flashDevCount); |
| |
| for (i = 0; i < flashDevCount; i++) { |
| flash_dev_t *dev = &flashDev[i]; |
| |
| if (dev->found && flashDiag(dev) == ERROR) |
| rv = ERROR; |
| } |
| |
| if (rv == OK) |
| printf("flashDiagAll: Passed\n"); |
| else |
| printf("flashDiagAll: Failed because of earlier errors\n"); |
| |
| return OK; |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| unsigned long flash_init (void) |
| { |
| unsigned long size = 0; |
| flash_dev_t *dev = NULL; |
| flashLibInit(); |
| |
| /* |
| * Provide info for FLASH (up to 960K) of Kernel Image data. |
| */ |
| dev = FLASH_DEV_BANK0_LOW; |
| flash_info[FLASH_BANK_KERNEL].flash_id = |
| (dev->vendorID << 16) | dev->deviceID; |
| flash_info[FLASH_BANK_KERNEL].sector_count = dev->sectors; |
| flash_info[FLASH_BANK_KERNEL].size = |
| flash_info[FLASH_BANK_KERNEL].sector_count * FLASH_SECTOR_SIZE; |
| flash_info[FLASH_BANK_KERNEL].start[FIRST_SECTOR] = dev->base; |
| size += flash_info[FLASH_BANK_KERNEL].size; |
| |
| /* |
| * Provide info for 512K PLCC FLASH ROM (U-Boot) |
| */ |
| dev = FLASH_DEV_BANK0_BOOT; |
| flash_info[FLASH_BANK_BOOT].flash_id = |
| (dev->vendorID << 16) | dev->deviceID; |
| flash_info[FLASH_BANK_BOOT].sector_count = dev->sectors; |
| flash_info[FLASH_BANK_BOOT].size = |
| flash_info[FLASH_BANK_BOOT].sector_count * FLASH_SECTOR_SIZE; |
| flash_info[FLASH_BANK_BOOT].start[FIRST_SECTOR] = dev->base; |
| size += flash_info[FLASH_BANK_BOOT].size; |
| |
| |
| /* |
| * Provide info for 512K FLASH0 segment (U-Boot) |
| */ |
| dev = FLASH_DEV_BANK0_HIGH; |
| flash_info[FLASH_BANK_AUX].flash_id = |
| (dev->vendorID << 16) | dev->deviceID; |
| flash_info[FLASH_BANK_AUX].sector_count = dev->sectors; |
| flash_info[FLASH_BANK_AUX].size = |
| flash_info[FLASH_BANK_AUX].sector_count * FLASH_SECTOR_SIZE; |
| flash_info[FLASH_BANK_AUX].start[FIRST_SECTOR] = dev->base; |
| size += flash_info[FLASH_BANK_AUX].size; |
| |
| |
| return size; |
| } |
| |
| /* |
| * Get flash device from U-Boot flash info. |
| */ |
| flash_dev_t* |
| getFlashDevFromInfo(flash_info_t* info) |
| { |
| int i; |
| |
| if(!info) |
| return NULL; |
| |
| for (i = 0; i < flashDevCount; i++) { |
| flash_dev_t *dev = &flashDev[i]; |
| if(dev->found && (dev->base == info->start[0])) |
| return dev; |
| } |
| printf("ERROR: notice, no FLASH mapped at address 0x%x\n", |
| (unsigned int)info->start[0]); |
| return NULL; |
| } |
| |
| ulong |
| flash_get_size (vu_long *addr, flash_info_t *info) |
| { |
| int i; |
| for(i = 0; i < flashDevCount; i++) { |
| flash_dev_t *dev = &flashDev[i]; |
| if(dev->found){ |
| if(dev->base == (unsigned int)addr){ |
| info->flash_id = (dev->vendorID << 16) | dev->deviceID; |
| info->sector_count = dev->sectors; |
| info->size = info->sector_count * FLASH_SECTOR_SIZE; |
| return dev->sectors * FLASH_SECTOR_SIZE; |
| } |
| } |
| } |
| return 0; |
| } |
| |
| void |
| flash_print_info (flash_info_t *info) |
| { |
| int i; |
| unsigned int chip; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch ((info->flash_id >> 16) & 0xff) { |
| case 0x1: |
| printf ("AMD "); |
| break; |
| default: |
| printf ("Unknown Vendor "); |
| break; |
| } |
| chip = (unsigned int) info->flash_id & 0x000000ff; |
| |
| switch (chip) { |
| |
| case AMD_ID_F040B: |
| printf ("AM29F040B (4 Mbit)\n"); |
| break; |
| |
| case AMD_ID_LV160B: |
| case FLASH_AM160LV: |
| case 0x49: |
| printf ("AM29LV160B (16 Mbit / 2M x 8bit)\n"); |
| break; |
| |
| default: |
| printf ("Unknown Chip Type:0x%x\n", chip); |
| break; |
| } |
| |
| printf (" Size: %ld bytes in %d Sectors\n", |
| info->size, info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| for (i=0; i<info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s", |
| info->start[FIRST_SECTOR] + i*FLASH_SECTOR_SIZE, |
| info->protect[i] ? " (RO)" : " " |
| ); |
| } |
| printf ("\n"); |
| } |
| |
| |
| /* |
| * Erase a range of flash sectors. |
| */ |
| int flash_erase (flash_info_t *info, int s_first, int s_last) |
| { |
| vu_long *addr = (vu_long*)(info->start[0]); |
| int prot, sect, l_sect; |
| flash_dev_t* dev = NULL; |
| |
| if ((s_first < 0) || (s_first > s_last)) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect = s_first; sect <= s_last; sect++) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf ("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| } else { |
| printf ("\n"); |
| } |
| |
| l_sect = -1; |
| |
| /* Start erase on unprotected sectors */ |
| dev = getFlashDevFromInfo(info); |
| if(dev){ |
| printf("Erase FLASH[%s] -%d sectors:", dev->name, dev->sectors); |
| for (sect = s_first; sect<=s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| addr = (vu_long*)(dev->base); |
| /* printf("erase_sector: sector=%d, addr=0x%x\n", |
| sect, addr); */ |
| printf("."); |
| if(ERROR == flashEraseSector(dev, sect)){ |
| printf("ERROR: could not erase sector %d on FLASH[%s]\n", |
| sect, dev->name); |
| return 1; |
| } |
| } |
| } |
| } |
| printf (" done\n"); |
| return 0; |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int |
| write_word (flash_info_t *info, ulong dest, ulong data) |
| { |
| |
| flash_dev_t* dev = getFlashDevFromInfo(info); |
| int addr = dest - info->start[0]; |
| |
| if (! dev) |
| return 1; |
| |
| if(OK != flashWrite(dev, addr, (char*)&data, sizeof(ulong))){ |
| printf("ERROR: could not write to addr=0x%x, data=0x%x\n", |
| (unsigned int)addr, (unsigned)data); |
| return 1; |
| } |
| |
| if((addr % FLASH_SECTOR_SIZE) == 0) |
| printf("."); |
| |
| |
| PRINTF("write_word:0x%x, base=0x%x, addr=0x%x, data=0x%x\n", |
| (unsigned)info->start[0], |
| (unsigned)dest, |
| (unsigned)(dest - info->start[0]), |
| (unsigned)data); |
| |
| |
| |
| return (0); |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| |
| int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| ulong cp, wp, data; |
| int i, l, rc; |
| flash_dev_t* dev = getFlashDevFromInfo(info); |
| |
| if( dev ) { |
| printf("FLASH[%s]:", dev->name); |
| wp = (addr & ~3); /* get lower word aligned address */ |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ((l = addr - wp) != 0) { |
| data = 0; |
| for (i=0, cp=wp; i<l; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| for (; i<4 && cnt>0; ++i) { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| for (; cnt==0 && i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| while (cnt >= 4) { |
| data = 0; |
| for (i=0; i<4; ++i) { |
| data = (data << 8) | *src++; |
| } |
| if ((rc = write_word(info, wp, data)) != 0) { |
| return (rc); |
| } |
| wp += 4; |
| cnt -= 4; |
| } |
| |
| if (cnt == 0) { |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| return (write_word(info, wp, data)); |
| } |
| return 1; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |