blob: 9d539849739f8eea919fc1757cdff14678da0d40 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Ethernet driver for TI TMS320DM644x (DaVinci) chips.
*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
* Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright
* follows:
*
* ----------------------------------------------------------------------------
*
* dm644x_emac.c
*
* TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM
*
* Copyright (C) 2005 Texas Instruments.
*
* ----------------------------------------------------------------------------
*
* Modifications:
* ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot.
* ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors
*/
#include <common.h>
#include <command.h>
#include <net.h>
#include <miiphy.h>
#include <malloc.h>
#include <netdev.h>
#include <linux/compiler.h>
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
#include "davinci_emac.h"
unsigned int emac_dbg = 0;
#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
#ifdef EMAC_HW_RAM_ADDR
static inline unsigned long BD_TO_HW(unsigned long x)
{
if (x == 0)
return 0;
return x - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR;
}
static inline unsigned long HW_TO_BD(unsigned long x)
{
if (x == 0)
return 0;
return x - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR;
}
#else
#define BD_TO_HW(x) (x)
#define HW_TO_BD(x) (x)
#endif
#ifdef DAVINCI_EMAC_GIG_ENABLE
#define emac_gigabit_enable(phy_addr) davinci_eth_gigabit_enable(phy_addr)
#else
#define emac_gigabit_enable(phy_addr) /* no gigabit to enable */
#endif
#if !defined(CONFIG_SYS_EMAC_TI_CLKDIV)
#define CONFIG_SYS_EMAC_TI_CLKDIV ((EMAC_MDIO_BUS_FREQ / \
EMAC_MDIO_CLOCK_FREQ) - 1)
#endif
static void davinci_eth_mdio_enable(void);
static int gen_init_phy(int phy_addr);
static int gen_is_phy_connected(int phy_addr);
static int gen_get_link_speed(int phy_addr);
static int gen_auto_negotiate(int phy_addr);
void eth_mdio_enable(void)
{
davinci_eth_mdio_enable();
}
/* EMAC Addresses */
static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
static volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR;
/* EMAC descriptors */
static volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE);
static volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
static volatile emac_desc *emac_rx_active_head = 0;
static volatile emac_desc *emac_rx_active_tail = 0;
static int emac_rx_queue_active = 0;
/* Receive packet buffers */
static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * EMAC_RXBUF_SIZE]
__aligned(ARCH_DMA_MINALIGN);
#ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 3
#endif
/* PHY address for a discovered PHY (0xff - not found) */
static u_int8_t active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
/* number of PHY found active */
static u_int8_t num_phy;
phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
static int davinci_eth_set_mac_addr(struct eth_device *dev)
{
unsigned long mac_hi;
unsigned long mac_lo;
/*
* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
* receive)
* Using channel 0 only - other channels are disabled
* */
writel(0, &adap_emac->MACINDEX);
mac_hi = (dev->enetaddr[3] << 24) |
(dev->enetaddr[2] << 16) |
(dev->enetaddr[1] << 8) |
(dev->enetaddr[0]);
mac_lo = (dev->enetaddr[5] << 8) |
(dev->enetaddr[4]);
writel(mac_hi, &adap_emac->MACADDRHI);
#if defined(DAVINCI_EMAC_VERSION2)
writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
&adap_emac->MACADDRLO);
#else
writel(mac_lo, &adap_emac->MACADDRLO);
#endif
writel(0, &adap_emac->MACHASH1);
writel(0, &adap_emac->MACHASH2);
/* Set source MAC address - REQUIRED */
writel(mac_hi, &adap_emac->MACSRCADDRHI);
writel(mac_lo, &adap_emac->MACSRCADDRLO);
return 0;
}
static void davinci_eth_mdio_enable(void)
{
u_int32_t clkdiv;
clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV;
writel((clkdiv & 0xff) |
MDIO_CONTROL_ENABLE |
MDIO_CONTROL_FAULT |
MDIO_CONTROL_FAULT_ENABLE,
&adap_mdio->CONTROL);
while (readl(&adap_mdio->CONTROL) & MDIO_CONTROL_IDLE)
;
}
/*
* Tries to find an active connected PHY. Returns 1 if address if found.
* If no active PHY (or more than one PHY) found returns 0.
* Sets active_phy_addr variable.
*/
static int davinci_eth_phy_detect(void)
{
u_int32_t phy_act_state;
int i;
int j;
unsigned int count = 0;
for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++)
active_phy_addr[i] = 0xff;
udelay(1000);
phy_act_state = readl(&adap_mdio->ALIVE);
if (phy_act_state == 0)
return 0; /* No active PHYs */
debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
for (i = 0, j = 0; i < 32; i++)
if (phy_act_state & (1 << i)) {
count++;
if (count <= CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) {
active_phy_addr[j++] = i;
} else {
printf("%s: to many PHYs detected.\n",
__func__);
count = 0;
break;
}
}
num_phy = count;
return count;
}
/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
{
int tmp;
while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO)
;
writel(MDIO_USERACCESS0_GO |
MDIO_USERACCESS0_WRITE_READ |
((reg_num & 0x1f) << 21) |
((phy_addr & 0x1f) << 16),
&adap_mdio->USERACCESS0);
/* Wait for command to complete */
while ((tmp = readl(&adap_mdio->USERACCESS0)) & MDIO_USERACCESS0_GO)
;
if (tmp & MDIO_USERACCESS0_ACK) {
*data = tmp & 0xffff;
return 1;
}
return 0;
}
/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
{
while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO)
;
writel(MDIO_USERACCESS0_GO |
MDIO_USERACCESS0_WRITE_WRITE |
((reg_num & 0x1f) << 21) |
((phy_addr & 0x1f) << 16) |
(data & 0xffff),
&adap_mdio->USERACCESS0);
/* Wait for command to complete */
while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO)
;
return 1;
}
/* PHY functions for a generic PHY */
static int gen_init_phy(int phy_addr)
{
int ret = 1;
if (gen_get_link_speed(phy_addr)) {
/* Try another time */
ret = gen_get_link_speed(phy_addr);
}
return(ret);
}
static int gen_is_phy_connected(int phy_addr)
{
u_int16_t dummy;
return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy);
}
static int get_active_phy(void)
{
int i;
for (i = 0; i < num_phy; i++)
if (phy[i].get_link_speed(active_phy_addr[i]))
return i;
return -1; /* Return error if no link */
}
static int gen_get_link_speed(int phy_addr)
{
u_int16_t tmp;
if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) &&
(tmp & 0x04)) {
#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
defined(CONFIG_MACH_DAVINCI_DA850_EVM)
davinci_eth_phy_read(phy_addr, MII_LPA, &tmp);
/* Speed doesn't matter, there is no setting for it in EMAC. */
if (tmp & (LPA_100FULL | LPA_10FULL)) {
/* set EMAC for Full Duplex */
writel(EMAC_MACCONTROL_MIIEN_ENABLE |
EMAC_MACCONTROL_FULLDUPLEX_ENABLE,
&adap_emac->MACCONTROL);
} else {
/*set EMAC for Half Duplex */
writel(EMAC_MACCONTROL_MIIEN_ENABLE,
&adap_emac->MACCONTROL);
}
if (tmp & (LPA_100FULL | LPA_100HALF))
writel(readl(&adap_emac->MACCONTROL) |
EMAC_MACCONTROL_RMIISPEED_100,
&adap_emac->MACCONTROL);
else
writel(readl(&adap_emac->MACCONTROL) &
~EMAC_MACCONTROL_RMIISPEED_100,
&adap_emac->MACCONTROL);
#endif
return(1);
}
return(0);
}
static int gen_auto_negotiate(int phy_addr)
{
u_int16_t tmp;
u_int16_t val;
unsigned long cntr = 0;
if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
return 0;
val = tmp | BMCR_FULLDPLX | BMCR_ANENABLE |
BMCR_SPEED100;
davinci_eth_phy_write(phy_addr, MII_BMCR, val);
if (!davinci_eth_phy_read(phy_addr, MII_ADVERTISE, &val))
return 0;
val |= (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL |
ADVERTISE_10HALF);
davinci_eth_phy_write(phy_addr, MII_ADVERTISE, val);
if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
return(0);
#ifdef DAVINCI_EMAC_GIG_ENABLE
davinci_eth_phy_read(phy_addr, MII_CTRL1000, &val);
val |= PHY_1000BTCR_1000FD;
val &= ~PHY_1000BTCR_1000HD;
davinci_eth_phy_write(phy_addr, MII_CTRL1000, val);
davinci_eth_phy_read(phy_addr, MII_CTRL1000, &val);
#endif
/* Restart Auto_negotiation */
tmp |= BMCR_ANRESTART;
davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
/*check AutoNegotiate complete */
do {
udelay(40000);
if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
return 0;
if (tmp & BMSR_ANEGCOMPLETE)
break;
cntr++;
} while (cntr < 200);
if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
return(0);
if (!(tmp & BMSR_ANEGCOMPLETE))
return(0);
return(gen_get_link_speed(phy_addr));
}
/* End of generic PHY functions */
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static int davinci_mii_phy_read(struct mii_dev *bus, int addr, int devad,
int reg)
{
unsigned short value = 0;
int retval = davinci_eth_phy_read(addr, reg, &value);
return retval ? value : -EIO;
}
static int davinci_mii_phy_write(struct mii_dev *bus, int addr, int devad,
int reg, u16 value)
{
return davinci_eth_phy_write(addr, reg, value) ? 0 : 1;
}
#endif
static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr)
{
u_int16_t data;
if (davinci_eth_phy_read(phy_addr, 0, &data)) {
if (data & (1 << 6)) { /* speed selection MSB */
/*
* Check if link detected is giga-bit
* If Gigabit mode detected, enable gigbit in MAC
*/
writel(readl(&adap_emac->MACCONTROL) |
EMAC_MACCONTROL_GIGFORCE |
EMAC_MACCONTROL_GIGABIT_ENABLE,
&adap_emac->MACCONTROL);
}
}
}
/* Eth device open */
static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
{
dv_reg_p addr;
u_int32_t clkdiv, cnt, mac_control;
uint16_t __maybe_unused lpa_val;
volatile emac_desc *rx_desc;
int index;
debug_emac("+ emac_open\n");
/* Reset EMAC module and disable interrupts in wrapper */
writel(1, &adap_emac->SOFTRESET);
while (readl(&adap_emac->SOFTRESET) != 0)
;
#if defined(DAVINCI_EMAC_VERSION2)
writel(1, &adap_ewrap->softrst);
while (readl(&adap_ewrap->softrst) != 0)
;
#else
writel(0, &adap_ewrap->EWCTL);
for (cnt = 0; cnt < 5; cnt++) {
clkdiv = readl(&adap_ewrap->EWCTL);
}
#endif
#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
defined(CONFIG_MACH_DAVINCI_DA850_EVM)
adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
#endif
rx_desc = emac_rx_desc;
writel(1, &adap_emac->TXCONTROL);
writel(1, &adap_emac->RXCONTROL);
davinci_eth_set_mac_addr(dev);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
for (cnt = 0; cnt < 8; cnt++)
writel(0, addr++);
addr = &adap_emac->RX0HDP;
for (cnt = 0; cnt < 8; cnt++)
writel(0, addr++);
/* Clear Statistics (do this before setting MacControl register) */
addr = &adap_emac->RXGOODFRAMES;
for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++)
writel(0, addr++);
/* No multicast addressing */
writel(0, &adap_emac->MACHASH1);
writel(0, &adap_emac->MACHASH2);
/* Create RX queue and set receive process in place */
emac_rx_active_head = emac_rx_desc;
for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
rx_desc->next = BD_TO_HW((u_int32_t)(rx_desc + 1));
rx_desc->buffer = &emac_rx_buffers[cnt * EMAC_RXBUF_SIZE];
rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
rx_desc++;
}
/* Finalize the rx desc list */
rx_desc--;
rx_desc->next = 0;
emac_rx_active_tail = rx_desc;
emac_rx_queue_active = 1;
/* Enable TX/RX */
writel(EMAC_MAX_ETHERNET_PKT_SIZE, &adap_emac->RXMAXLEN);
writel(0, &adap_emac->RXBUFFEROFFSET);
/*
* No fancy configs - Use this for promiscous debug
* - EMAC_RXMBPENABLE_RXCAFEN_ENABLE
*/
writel(EMAC_RXMBPENABLE_RXBROADEN, &adap_emac->RXMBPENABLE);
/* Enable ch 0 only */
writel(1, &adap_emac->RXUNICASTSET);
/* Init MDIO & get link state */
clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV;
writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT,
&adap_mdio->CONTROL);
/* We need to wait for MDIO to start */
udelay(1000);
index = get_active_phy();
if (index == -1)
return(0);
/* Enable MII interface */
mac_control = EMAC_MACCONTROL_MIIEN_ENABLE;
#ifdef DAVINCI_EMAC_GIG_ENABLE
davinci_eth_phy_read(active_phy_addr[index], MII_STAT1000, &lpa_val);
if (lpa_val & PHY_1000BTSR_1000FD) {
debug_emac("eth_open : gigabit negotiated\n");
mac_control |= EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
mac_control |= EMAC_MACCONTROL_GIGABIT_ENABLE;
}
#endif
davinci_eth_phy_read(active_phy_addr[index], MII_LPA, &lpa_val);
if (lpa_val & (LPA_100FULL | LPA_10FULL))
/* set EMAC for Full Duplex */
mac_control |= EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
#if defined(CONFIG_SOC_DA8XX) || \
(defined(CONFIG_OMAP34XX) && defined(CONFIG_DRIVER_TI_EMAC_USE_RMII))
mac_control |= EMAC_MACCONTROL_RMIISPEED_100;
#endif
writel(mac_control, &adap_emac->MACCONTROL);
/* Start receive process */
writel(BD_TO_HW((u_int32_t)emac_rx_desc), &adap_emac->RX0HDP);
debug_emac("- emac_open\n");
return(1);
}
/* EMAC Channel Teardown */
static void davinci_eth_ch_teardown(int ch)
{
dv_reg dly = 0xff;
dv_reg cnt;
debug_emac("+ emac_ch_teardown\n");
if (ch == EMAC_CH_TX) {
/* Init TX channel teardown */
writel(0, &adap_emac->TXTEARDOWN);
do {
/*
* Wait here for Tx teardown completion interrupt to
* occur. Note: A task delay can be called here to pend
* rather than occupying CPU cycles - anyway it has
* been found that teardown takes very few cpu cycles
* and does not affect functionality
*/
dly--;
udelay(1);
if (dly == 0)
break;
cnt = readl(&adap_emac->TX0CP);
} while (cnt != 0xfffffffc);
writel(cnt, &adap_emac->TX0CP);
writel(0, &adap_emac->TX0HDP);
} else {
/* Init RX channel teardown */
writel(0, &adap_emac->RXTEARDOWN);
do {
/*
* Wait here for Rx teardown completion interrupt to
* occur. Note: A task delay can be called here to pend
* rather than occupying CPU cycles - anyway it has
* been found that teardown takes very few cpu cycles
* and does not affect functionality
*/
dly--;
udelay(1);
if (dly == 0)
break;
cnt = readl(&adap_emac->RX0CP);
} while (cnt != 0xfffffffc);
writel(cnt, &adap_emac->RX0CP);
writel(0, &adap_emac->RX0HDP);
}
debug_emac("- emac_ch_teardown\n");
}
/* Eth device close */
static void davinci_eth_close(struct eth_device *dev)
{
debug_emac("+ emac_close\n");
davinci_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */
if (readl(&adap_emac->RXCONTROL) & 1)
davinci_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */
/* Reset EMAC module and disable interrupts in wrapper */
writel(1, &adap_emac->SOFTRESET);
#if defined(DAVINCI_EMAC_VERSION2)
writel(1, &adap_ewrap->softrst);
#else
writel(0, &adap_ewrap->EWCTL);
#endif
#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
defined(CONFIG_MACH_DAVINCI_DA850_EVM)
adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
#endif
debug_emac("- emac_close\n");
}
static int tx_send_loop = 0;
/*
* This function sends a single packet on the network and returns
* positive number (number of bytes transmitted) or negative for error
*/
static int davinci_eth_send_packet (struct eth_device *dev,
void *packet, int length)
{
int ret_status = -1;
int index;
tx_send_loop = 0;
index = get_active_phy();
if (index == -1) {
printf(" WARN: emac_send_packet: No link\n");
return (ret_status);
}
/* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */
if (length < EMAC_MIN_ETHERNET_PKT_SIZE) {
length = EMAC_MIN_ETHERNET_PKT_SIZE;
}
/* Populate the TX descriptor */
emac_tx_desc->next = 0;
emac_tx_desc->buffer = (u_int8_t *) packet;
emac_tx_desc->buff_off_len = (length & 0xffff);
emac_tx_desc->pkt_flag_len = ((length & 0xffff) |
EMAC_CPPI_SOP_BIT |
EMAC_CPPI_OWNERSHIP_BIT |
EMAC_CPPI_EOP_BIT);
flush_dcache_range((unsigned long)packet,
(unsigned long)packet + ALIGN(length, PKTALIGN));
/* Send the packet */
writel(BD_TO_HW((unsigned long)emac_tx_desc), &adap_emac->TX0HDP);
/* Wait for packet to complete or link down */
while (1) {
if (!phy[index].get_link_speed(active_phy_addr[index])) {
davinci_eth_ch_teardown (EMAC_CH_TX);
return (ret_status);
}
if (readl(&adap_emac->TXINTSTATRAW) & 0x01) {
ret_status = length;
break;
}
tx_send_loop++;
}
return (ret_status);
}
/*
* This function handles receipt of a packet from the network
*/
static int davinci_eth_rcv_packet (struct eth_device *dev)
{
volatile emac_desc *rx_curr_desc;
volatile emac_desc *curr_desc;
volatile emac_desc *tail_desc;
int status, ret = -1;
rx_curr_desc = emac_rx_active_head;
if (!rx_curr_desc)
return 0;
status = rx_curr_desc->pkt_flag_len;
if ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0) {
if (status & EMAC_CPPI_RX_ERROR_FRAME) {
/* Error in packet - discard it and requeue desc */
printf ("WARN: emac_rcv_pkt: Error in packet\n");
} else {
unsigned long tmp = (unsigned long)rx_curr_desc->buffer;
unsigned short len =
rx_curr_desc->buff_off_len & 0xffff;
invalidate_dcache_range(tmp, tmp + ALIGN(len, PKTALIGN));
net_process_received_packet(rx_curr_desc->buffer, len);
ret = len;
}
/* Ack received packet descriptor */
writel(BD_TO_HW((ulong)rx_curr_desc), &adap_emac->RX0CP);
curr_desc = rx_curr_desc;
emac_rx_active_head =
(volatile emac_desc *) (HW_TO_BD(rx_curr_desc->next));
if (status & EMAC_CPPI_EOQ_BIT) {
if (emac_rx_active_head) {
writel(BD_TO_HW((ulong)emac_rx_active_head),
&adap_emac->RX0HDP);
} else {
emac_rx_queue_active = 0;
printf ("INFO:emac_rcv_packet: RX Queue not active\n");
}
}
/* Recycle RX descriptor */
rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
rx_curr_desc->next = 0;
if (emac_rx_active_head == 0) {
printf ("INFO: emac_rcv_pkt: active queue head = 0\n");
emac_rx_active_head = curr_desc;
emac_rx_active_tail = curr_desc;
if (emac_rx_queue_active != 0) {
writel(BD_TO_HW((ulong)emac_rx_active_head),
&adap_emac->RX0HDP);
printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
emac_rx_queue_active = 1;
}
} else {
tail_desc = emac_rx_active_tail;
emac_rx_active_tail = curr_desc;
tail_desc->next = BD_TO_HW((ulong) curr_desc);
status = tail_desc->pkt_flag_len;
if (status & EMAC_CPPI_EOQ_BIT) {
writel(BD_TO_HW((ulong)curr_desc),
&adap_emac->RX0HDP);
status &= ~EMAC_CPPI_EOQ_BIT;
tail_desc->pkt_flag_len = status;
}
}
return (ret);
}
return (0);
}
/*
* This function initializes the emac hardware. It does NOT initialize
* EMAC modules power or pin multiplexors, that is done by board_init()
* much earlier in bootup process. Returns 1 on success, 0 otherwise.
*/
int davinci_emac_initialize(void)
{
u_int32_t phy_id;
u_int16_t tmp;
int i;
int ret;
struct eth_device *dev;
dev = malloc(sizeof *dev);
if (dev == NULL)
return -1;
memset(dev, 0, sizeof *dev);
strcpy(dev->name, "DaVinci-EMAC");
dev->iobase = 0;
dev->init = davinci_eth_open;
dev->halt = davinci_eth_close;
dev->send = davinci_eth_send_packet;
dev->recv = davinci_eth_rcv_packet;
dev->write_hwaddr = davinci_eth_set_mac_addr;
eth_register(dev);
davinci_eth_mdio_enable();
/* let the EMAC detect the PHYs */
udelay(5000);
for (i = 0; i < 256; i++) {
if (readl(&adap_mdio->ALIVE))
break;
udelay(1000);
}
if (i >= 256) {
printf("No ETH PHY detected!!!\n");
return(0);
}
/* Find if PHY(s) is/are connected */
ret = davinci_eth_phy_detect();
if (!ret)
return(0);
else
debug_emac(" %d ETH PHY detected\n", ret);
/* Get PHY ID and initialize phy_ops for a detected PHY */
for (i = 0; i < num_phy; i++) {
if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID1,
&tmp)) {
active_phy_addr[i] = 0xff;
continue;
}
phy_id = (tmp << 16) & 0xffff0000;
if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID2,
&tmp)) {
active_phy_addr[i] = 0xff;
continue;
}
phy_id |= tmp & 0x0000ffff;
sprintf(phy[i].name, "GENERIC @ 0x%02x",
active_phy_addr[i]);
phy[i].init = gen_init_phy;
phy[i].is_phy_connected = gen_is_phy_connected;
phy[i].get_link_speed = gen_get_link_speed;
phy[i].auto_negotiate = gen_auto_negotiate;
debug("Ethernet PHY: %s\n", phy[i].name);
int retval;
struct mii_dev *mdiodev = mdio_alloc();
if (!mdiodev)
return -ENOMEM;
strncpy(mdiodev->name, phy[i].name, MDIO_NAME_LEN);
mdiodev->read = davinci_mii_phy_read;
mdiodev->write = davinci_mii_phy_write;
retval = mdio_register(mdiodev);
if (retval < 0)
return retval;
#ifdef DAVINCI_EMAC_GIG_ENABLE
#define PHY_CONF_REG 22
/* Enable PHY to clock out TX_CLK */
davinci_eth_phy_read(active_phy_addr[i], PHY_CONF_REG, &tmp);
tmp |= PHY_CONF_TXCLKEN;
davinci_eth_phy_write(active_phy_addr[i], PHY_CONF_REG, tmp);
davinci_eth_phy_read(active_phy_addr[i], PHY_CONF_REG, &tmp);
#endif
}
#if defined(CONFIG_TI816X) || (defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
defined(CONFIG_MACH_DAVINCI_DA850_EVM) && \
!defined(CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE))
for (i = 0; i < num_phy; i++) {
if (phy[i].is_phy_connected(i))
phy[i].auto_negotiate(i);
}
#endif
return(1);
}