| /* |
| * Copyright 2016 Freescale Semiconductor, Inc. |
| * |
| * RGPIO2P driver for the Freescale i.MX7ULP. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <fdtdec.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <malloc.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| enum imx_rgpio2p_direction { |
| IMX_RGPIO2P_DIRECTION_IN, |
| IMX_RGPIO2P_DIRECTION_OUT, |
| }; |
| |
| #define GPIO_PER_BANK 32 |
| |
| struct imx_rgpio2p_data { |
| struct gpio_regs *regs; |
| }; |
| |
| struct imx_rgpio2p_plat { |
| int bank_index; |
| struct gpio_regs *regs; |
| }; |
| |
| static int imx_rgpio2p_is_output(struct gpio_regs *regs, int offset) |
| { |
| u32 val; |
| |
| val = readl(®s->gpio_pddr); |
| |
| return val & (1 << offset) ? 1 : 0; |
| } |
| |
| static void imx_rgpio2p_bank_direction(struct gpio_regs *regs, int offset, |
| enum imx_rgpio2p_direction direction) |
| { |
| u32 l; |
| |
| l = readl(®s->gpio_pddr); |
| |
| switch (direction) { |
| case IMX_RGPIO2P_DIRECTION_OUT: |
| l |= 1 << offset; |
| break; |
| case IMX_RGPIO2P_DIRECTION_IN: |
| l &= ~(1 << offset); |
| } |
| writel(l, ®s->gpio_pddr); |
| } |
| |
| static void imx_rgpio2p_bank_set_value(struct gpio_regs *regs, int offset, |
| int value) |
| { |
| if (value) |
| writel((1 << offset), ®s->gpio_psor); |
| else |
| writel((1 << offset), ®s->gpio_pcor); |
| } |
| |
| static int imx_rgpio2p_bank_get_value(struct gpio_regs *regs, int offset) |
| { |
| return (readl(®s->gpio_pdir) >> offset) & 0x01; |
| } |
| |
| static int imx_rgpio2p_direction_input(struct udevice *dev, unsigned offset) |
| { |
| struct imx_rgpio2p_data *bank = dev_get_priv(dev); |
| |
| /* Configure GPIO direction as input. */ |
| imx_rgpio2p_bank_direction(bank->regs, offset, IMX_RGPIO2P_DIRECTION_IN); |
| |
| return 0; |
| } |
| |
| static int imx_rgpio2p_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct imx_rgpio2p_data *bank = dev_get_priv(dev); |
| |
| /* Configure GPIO output value. */ |
| imx_rgpio2p_bank_set_value(bank->regs, offset, value); |
| |
| /* Configure GPIO direction as output. */ |
| imx_rgpio2p_bank_direction(bank->regs, offset, IMX_RGPIO2P_DIRECTION_OUT); |
| |
| return 0; |
| } |
| |
| static int imx_rgpio2p_get_value(struct udevice *dev, unsigned offset) |
| { |
| struct imx_rgpio2p_data *bank = dev_get_priv(dev); |
| |
| return imx_rgpio2p_bank_get_value(bank->regs, offset); |
| } |
| |
| static int imx_rgpio2p_set_value(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct imx_rgpio2p_data *bank = dev_get_priv(dev); |
| |
| imx_rgpio2p_bank_set_value(bank->regs, offset, value); |
| |
| return 0; |
| } |
| |
| static int imx_rgpio2p_get_function(struct udevice *dev, unsigned offset) |
| { |
| struct imx_rgpio2p_data *bank = dev_get_priv(dev); |
| |
| /* GPIOF_FUNC is not implemented yet */ |
| if (imx_rgpio2p_is_output(bank->regs, offset)) |
| return GPIOF_OUTPUT; |
| else |
| return GPIOF_INPUT; |
| } |
| |
| static const struct dm_gpio_ops imx_rgpio2p_ops = { |
| .direction_input = imx_rgpio2p_direction_input, |
| .direction_output = imx_rgpio2p_direction_output, |
| .get_value = imx_rgpio2p_get_value, |
| .set_value = imx_rgpio2p_set_value, |
| .get_function = imx_rgpio2p_get_function, |
| }; |
| |
| static int imx_rgpio2p_probe(struct udevice *dev) |
| { |
| struct imx_rgpio2p_data *bank = dev_get_priv(dev); |
| struct imx_rgpio2p_plat *plat = dev_get_platdata(dev); |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| int banknum; |
| char name[18], *str; |
| |
| banknum = plat->bank_index; |
| sprintf(name, "GPIO%d_", banknum + 1); |
| str = strdup(name); |
| if (!str) |
| return -ENOMEM; |
| uc_priv->bank_name = str; |
| uc_priv->gpio_count = GPIO_PER_BANK; |
| bank->regs = plat->regs; |
| |
| return 0; |
| } |
| |
| static int imx_rgpio2p_bind(struct udevice *dev) |
| { |
| struct imx_rgpio2p_plat *plat = dev->platdata; |
| fdt_addr_t addr; |
| |
| /* |
| * If platdata already exsits, directly return. |
| * Actually only when DT is not supported, platdata |
| * is statically initialized in U_BOOT_DEVICES.Here |
| * will return. |
| */ |
| if (plat) |
| return 0; |
| |
| addr = devfdt_get_addr_index(dev, 1); |
| if (addr == FDT_ADDR_T_NONE) |
| return -ENODEV; |
| |
| /* |
| * TODO: |
| * When every board is converted to driver model and DT is supported, |
| * this can be done by auto-alloc feature, but not using calloc |
| * to alloc memory for platdata. |
| */ |
| plat = calloc(1, sizeof(*plat)); |
| if (!plat) |
| return -ENOMEM; |
| |
| plat->regs = (struct gpio_regs *)addr; |
| plat->bank_index = dev->req_seq; |
| dev->platdata = plat; |
| |
| return 0; |
| } |
| |
| |
| static const struct udevice_id imx_rgpio2p_ids[] = { |
| { .compatible = "fsl,imx7ulp-gpio" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(imx_rgpio2p) = { |
| .name = "imx_rgpio2p", |
| .id = UCLASS_GPIO, |
| .ops = &imx_rgpio2p_ops, |
| .probe = imx_rgpio2p_probe, |
| .priv_auto_alloc_size = sizeof(struct imx_rgpio2p_plat), |
| .of_match = imx_rgpio2p_ids, |
| .bind = imx_rgpio2p_bind, |
| }; |
| |
| #if !CONFIG_IS_ENABLED(OF_CONTROL) |
| static const struct imx_rgpio2p_plat imx_plat[] = { |
| { 0, (struct gpio_regs *)RGPIO2P_GPIO1_BASE_ADDR }, |
| { 1, (struct gpio_regs *)RGPIO2P_GPIO2_BASE_ADDR }, |
| { 2, (struct gpio_regs *)RGPIO2P_GPIO3_BASE_ADDR }, |
| { 3, (struct gpio_regs *)RGPIO2P_GPIO4_BASE_ADDR }, |
| { 4, (struct gpio_regs *)RGPIO2P_GPIO5_BASE_ADDR }, |
| { 5, (struct gpio_regs *)RGPIO2P_GPIO6_BASE_ADDR }, |
| }; |
| |
| U_BOOT_DEVICES(imx_rgpio2ps) = { |
| { "imx_rgpio2p", &imx_plat[0] }, |
| { "imx_rgpio2p", &imx_plat[1] }, |
| { "imx_rgpio2p", &imx_plat[2] }, |
| { "imx_rgpio2p", &imx_plat[3] }, |
| { "imx_rgpio2p", &imx_plat[4] }, |
| { "imx_rgpio2p", &imx_plat[5] }, |
| }; |
| #endif |