| /* |
| * Copyright (C) 2016 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <fdtdec.h> |
| #include <mmc.h> |
| #include <dm.h> |
| #include <linux/compat.h> |
| #include <linux/dma-direction.h> |
| #include <linux/io.h> |
| #include <linux/sizes.h> |
| #include <asm/unaligned.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define UNIPHIER_SD_CMD 0x000 /* command */ |
| #define UNIPHIER_SD_CMD_NOSTOP BIT(14) /* No automatic CMD12 issue */ |
| #define UNIPHIER_SD_CMD_MULTI BIT(13) /* multiple block transfer */ |
| #define UNIPHIER_SD_CMD_RD BIT(12) /* 1: read, 0: write */ |
| #define UNIPHIER_SD_CMD_DATA BIT(11) /* data transfer */ |
| #define UNIPHIER_SD_CMD_APP BIT(6) /* ACMD preceded by CMD55 */ |
| #define UNIPHIER_SD_CMD_NORMAL (0 << 8)/* auto-detect of resp-type */ |
| #define UNIPHIER_SD_CMD_RSP_NONE (3 << 8)/* response: none */ |
| #define UNIPHIER_SD_CMD_RSP_R1 (4 << 8)/* response: R1, R5, R6, R7 */ |
| #define UNIPHIER_SD_CMD_RSP_R1B (5 << 8)/* response: R1b, R5b */ |
| #define UNIPHIER_SD_CMD_RSP_R2 (6 << 8)/* response: R2 */ |
| #define UNIPHIER_SD_CMD_RSP_R3 (7 << 8)/* response: R3, R4 */ |
| #define UNIPHIER_SD_ARG 0x008 /* command argument */ |
| #define UNIPHIER_SD_STOP 0x010 /* stop action control */ |
| #define UNIPHIER_SD_STOP_SEC BIT(8) /* use sector count */ |
| #define UNIPHIER_SD_STOP_STP BIT(0) /* issue CMD12 */ |
| #define UNIPHIER_SD_SECCNT 0x014 /* sector counter */ |
| #define UNIPHIER_SD_RSP10 0x018 /* response[39:8] */ |
| #define UNIPHIER_SD_RSP32 0x020 /* response[71:40] */ |
| #define UNIPHIER_SD_RSP54 0x028 /* response[103:72] */ |
| #define UNIPHIER_SD_RSP76 0x030 /* response[127:104] */ |
| #define UNIPHIER_SD_INFO1 0x038 /* IRQ status 1 */ |
| #define UNIPHIER_SD_INFO1_CD BIT(5) /* state of card detect */ |
| #define UNIPHIER_SD_INFO1_INSERT BIT(4) /* card inserted */ |
| #define UNIPHIER_SD_INFO1_REMOVE BIT(3) /* card removed */ |
| #define UNIPHIER_SD_INFO1_CMP BIT(2) /* data complete */ |
| #define UNIPHIER_SD_INFO1_RSP BIT(0) /* response complete */ |
| #define UNIPHIER_SD_INFO2 0x03c /* IRQ status 2 */ |
| #define UNIPHIER_SD_INFO2_ERR_ILA BIT(15) /* illegal access err */ |
| #define UNIPHIER_SD_INFO2_CBSY BIT(14) /* command busy */ |
| #define UNIPHIER_SD_INFO2_BWE BIT(9) /* write buffer ready */ |
| #define UNIPHIER_SD_INFO2_BRE BIT(8) /* read buffer ready */ |
| #define UNIPHIER_SD_INFO2_DAT0 BIT(7) /* SDDAT0 */ |
| #define UNIPHIER_SD_INFO2_ERR_RTO BIT(6) /* response time out */ |
| #define UNIPHIER_SD_INFO2_ERR_ILR BIT(5) /* illegal read err */ |
| #define UNIPHIER_SD_INFO2_ERR_ILW BIT(4) /* illegal write err */ |
| #define UNIPHIER_SD_INFO2_ERR_TO BIT(3) /* time out error */ |
| #define UNIPHIER_SD_INFO2_ERR_END BIT(2) /* END bit error */ |
| #define UNIPHIER_SD_INFO2_ERR_CRC BIT(1) /* CRC error */ |
| #define UNIPHIER_SD_INFO2_ERR_IDX BIT(0) /* cmd index error */ |
| #define UNIPHIER_SD_INFO1_MASK 0x040 |
| #define UNIPHIER_SD_INFO2_MASK 0x044 |
| #define UNIPHIER_SD_CLKCTL 0x048 /* clock divisor */ |
| #define UNIPHIER_SD_CLKCTL_DIV_MASK 0x104ff |
| #define UNIPHIER_SD_CLKCTL_DIV1024 BIT(16) /* SDCLK = CLK / 1024 */ |
| #define UNIPHIER_SD_CLKCTL_DIV512 BIT(7) /* SDCLK = CLK / 512 */ |
| #define UNIPHIER_SD_CLKCTL_DIV256 BIT(6) /* SDCLK = CLK / 256 */ |
| #define UNIPHIER_SD_CLKCTL_DIV128 BIT(5) /* SDCLK = CLK / 128 */ |
| #define UNIPHIER_SD_CLKCTL_DIV64 BIT(4) /* SDCLK = CLK / 64 */ |
| #define UNIPHIER_SD_CLKCTL_DIV32 BIT(3) /* SDCLK = CLK / 32 */ |
| #define UNIPHIER_SD_CLKCTL_DIV16 BIT(2) /* SDCLK = CLK / 16 */ |
| #define UNIPHIER_SD_CLKCTL_DIV8 BIT(1) /* SDCLK = CLK / 8 */ |
| #define UNIPHIER_SD_CLKCTL_DIV4 BIT(0) /* SDCLK = CLK / 4 */ |
| #define UNIPHIER_SD_CLKCTL_DIV2 0 /* SDCLK = CLK / 2 */ |
| #define UNIPHIER_SD_CLKCTL_DIV1 BIT(10) /* SDCLK = CLK */ |
| #define UNIPHIER_SD_CLKCTL_OFFEN BIT(9) /* stop SDCLK when unused */ |
| #define UNIPHIER_SD_CLKCTL_SCLKEN BIT(8) /* SDCLK output enable */ |
| #define UNIPHIER_SD_SIZE 0x04c /* block size */ |
| #define UNIPHIER_SD_OPTION 0x050 |
| #define UNIPHIER_SD_OPTION_WIDTH_MASK (5 << 13) |
| #define UNIPHIER_SD_OPTION_WIDTH_1 (4 << 13) |
| #define UNIPHIER_SD_OPTION_WIDTH_4 (0 << 13) |
| #define UNIPHIER_SD_OPTION_WIDTH_8 (1 << 13) |
| #define UNIPHIER_SD_BUF 0x060 /* read/write buffer */ |
| #define UNIPHIER_SD_EXTMODE 0x1b0 |
| #define UNIPHIER_SD_EXTMODE_DMA_EN BIT(1) /* transfer 1: DMA, 0: pio */ |
| #define UNIPHIER_SD_SOFT_RST 0x1c0 |
| #define UNIPHIER_SD_SOFT_RST_RSTX BIT(0) /* reset deassert */ |
| #define UNIPHIER_SD_VERSION 0x1c4 /* version register */ |
| #define UNIPHIER_SD_VERSION_IP 0xff /* IP version */ |
| #define UNIPHIER_SD_HOST_MODE 0x1c8 |
| #define UNIPHIER_SD_IF_MODE 0x1cc |
| #define UNIPHIER_SD_IF_MODE_DDR BIT(0) /* DDR mode */ |
| #define UNIPHIER_SD_VOLT 0x1e4 /* voltage switch */ |
| #define UNIPHIER_SD_VOLT_MASK (3 << 0) |
| #define UNIPHIER_SD_VOLT_OFF (0 << 0) |
| #define UNIPHIER_SD_VOLT_330 (1 << 0)/* 3.3V signal */ |
| #define UNIPHIER_SD_VOLT_180 (2 << 0)/* 1.8V signal */ |
| #define UNIPHIER_SD_DMA_MODE 0x410 |
| #define UNIPHIER_SD_DMA_MODE_DIR_RD BIT(16) /* 1: from device, 0: to dev */ |
| #define UNIPHIER_SD_DMA_MODE_ADDR_INC BIT(0) /* 1: address inc, 0: fixed */ |
| #define UNIPHIER_SD_DMA_CTL 0x414 |
| #define UNIPHIER_SD_DMA_CTL_START BIT(0) /* start DMA (auto cleared) */ |
| #define UNIPHIER_SD_DMA_RST 0x418 |
| #define UNIPHIER_SD_DMA_RST_RD BIT(9) |
| #define UNIPHIER_SD_DMA_RST_WR BIT(8) |
| #define UNIPHIER_SD_DMA_INFO1 0x420 |
| #define UNIPHIER_SD_DMA_INFO1_END_RD2 BIT(20) /* DMA from device is complete*/ |
| #define UNIPHIER_SD_DMA_INFO1_END_RD BIT(17) /* Don't use! Hardware bug */ |
| #define UNIPHIER_SD_DMA_INFO1_END_WR BIT(16) /* DMA to device is complete */ |
| #define UNIPHIER_SD_DMA_INFO1_MASK 0x424 |
| #define UNIPHIER_SD_DMA_INFO2 0x428 |
| #define UNIPHIER_SD_DMA_INFO2_ERR_RD BIT(17) |
| #define UNIPHIER_SD_DMA_INFO2_ERR_WR BIT(16) |
| #define UNIPHIER_SD_DMA_INFO2_MASK 0x42c |
| #define UNIPHIER_SD_DMA_ADDR_L 0x440 |
| #define UNIPHIER_SD_DMA_ADDR_H 0x444 |
| |
| /* alignment required by the DMA engine of this controller */ |
| #define UNIPHIER_SD_DMA_MINALIGN 0x10 |
| |
| struct uniphier_sd_plat { |
| struct mmc_config cfg; |
| struct mmc mmc; |
| }; |
| |
| struct uniphier_sd_priv { |
| void __iomem *regbase; |
| unsigned long mclk; |
| unsigned int version; |
| u32 caps; |
| #define UNIPHIER_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */ |
| #define UNIPHIER_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */ |
| #define UNIPHIER_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */ |
| #define UNIPHIER_SD_CAP_64BIT BIT(3) /* Controller is 64bit */ |
| }; |
| |
| static u64 uniphier_sd_readq(struct uniphier_sd_priv *priv, const u32 reg) |
| { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) |
| return readq(priv->regbase + (reg << 1)); |
| else |
| return readq(priv->regbase + reg); |
| } |
| |
| static void uniphier_sd_writeq(struct uniphier_sd_priv *priv, |
| const u64 val, const u32 reg) |
| { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) |
| writeq(val, priv->regbase + (reg << 1)); |
| else |
| writeq(val, priv->regbase + reg); |
| } |
| |
| static u32 uniphier_sd_readl(struct uniphier_sd_priv *priv, const u32 reg) |
| { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) |
| return readl(priv->regbase + (reg << 1)); |
| else |
| return readl(priv->regbase + reg); |
| } |
| |
| static void uniphier_sd_writel(struct uniphier_sd_priv *priv, |
| const u32 val, const u32 reg) |
| { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) |
| writel(val, priv->regbase + (reg << 1)); |
| else |
| writel(val, priv->regbase + reg); |
| } |
| |
| static dma_addr_t __dma_map_single(void *ptr, size_t size, |
| enum dma_data_direction dir) |
| { |
| unsigned long addr = (unsigned long)ptr; |
| |
| if (dir == DMA_FROM_DEVICE) |
| invalidate_dcache_range(addr, addr + size); |
| else |
| flush_dcache_range(addr, addr + size); |
| |
| return addr; |
| } |
| |
| static void __dma_unmap_single(dma_addr_t addr, size_t size, |
| enum dma_data_direction dir) |
| { |
| if (dir != DMA_TO_DEVICE) |
| invalidate_dcache_range(addr, addr + size); |
| } |
| |
| static int uniphier_sd_check_error(struct udevice *dev) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| u32 info2 = uniphier_sd_readl(priv, UNIPHIER_SD_INFO2); |
| |
| if (info2 & UNIPHIER_SD_INFO2_ERR_RTO) { |
| /* |
| * TIMEOUT must be returned for unsupported command. Do not |
| * display error log since this might be a part of sequence to |
| * distinguish between SD and MMC. |
| */ |
| return -ETIMEDOUT; |
| } |
| |
| if (info2 & UNIPHIER_SD_INFO2_ERR_TO) { |
| dev_err(dev, "timeout error\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (info2 & (UNIPHIER_SD_INFO2_ERR_END | UNIPHIER_SD_INFO2_ERR_CRC | |
| UNIPHIER_SD_INFO2_ERR_IDX)) { |
| dev_err(dev, "communication out of sync\n"); |
| return -EILSEQ; |
| } |
| |
| if (info2 & (UNIPHIER_SD_INFO2_ERR_ILA | UNIPHIER_SD_INFO2_ERR_ILR | |
| UNIPHIER_SD_INFO2_ERR_ILW)) { |
| dev_err(dev, "illegal access\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int uniphier_sd_wait_for_irq(struct udevice *dev, unsigned int reg, |
| u32 flag) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| long wait = 1000000; |
| int ret; |
| |
| while (!(uniphier_sd_readl(priv, reg) & flag)) { |
| if (wait-- < 0) { |
| dev_err(dev, "timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| ret = uniphier_sd_check_error(dev); |
| if (ret) |
| return ret; |
| |
| udelay(1); |
| } |
| |
| return 0; |
| } |
| |
| static int uniphier_sd_pio_read_one_block(struct udevice *dev, u32 **pbuf, |
| uint blocksize) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| int i, ret; |
| |
| /* wait until the buffer is filled with data */ |
| ret = uniphier_sd_wait_for_irq(dev, UNIPHIER_SD_INFO2, |
| UNIPHIER_SD_INFO2_BRE); |
| if (ret) |
| return ret; |
| |
| /* |
| * Clear the status flag _before_ read the buffer out because |
| * UNIPHIER_SD_INFO2_BRE is edge-triggered, not level-triggered. |
| */ |
| uniphier_sd_writel(priv, 0, UNIPHIER_SD_INFO2); |
| |
| if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) { |
| for (i = 0; i < blocksize / 8; i++) { |
| u64 data; |
| data = uniphier_sd_readq(priv, |
| UNIPHIER_SD_BUF); |
| *(*pbuf)++ = data; |
| *(*pbuf)++ = data >> 32; |
| } |
| } else { |
| for (i = 0; i < blocksize / 4; i++) { |
| u32 data; |
| data = uniphier_sd_readl(priv, UNIPHIER_SD_BUF); |
| *(*pbuf)++ = data; |
| } |
| } |
| } else { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) { |
| for (i = 0; i < blocksize / 8; i++) { |
| u64 data; |
| data = uniphier_sd_readq(priv, |
| UNIPHIER_SD_BUF); |
| put_unaligned(data, (*pbuf)++); |
| put_unaligned(data >> 32, (*pbuf)++); |
| } |
| } else { |
| for (i = 0; i < blocksize / 4; i++) { |
| u32 data; |
| data = uniphier_sd_readl(priv, UNIPHIER_SD_BUF); |
| put_unaligned(data, (*pbuf)++); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int uniphier_sd_pio_write_one_block(struct udevice *dev, |
| const u32 **pbuf, uint blocksize) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| int i, ret; |
| |
| /* wait until the buffer becomes empty */ |
| ret = uniphier_sd_wait_for_irq(dev, UNIPHIER_SD_INFO2, |
| UNIPHIER_SD_INFO2_BWE); |
| if (ret) |
| return ret; |
| |
| uniphier_sd_writel(priv, 0, UNIPHIER_SD_INFO2); |
| |
| if (likely(IS_ALIGNED((unsigned long)*pbuf, 4))) { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) { |
| for (i = 0; i < blocksize / 8; i++) { |
| u64 data = *(*pbuf)++; |
| data |= (u64)*(*pbuf)++ << 32; |
| uniphier_sd_writeq(priv, data, |
| UNIPHIER_SD_BUF); |
| } |
| } else { |
| for (i = 0; i < blocksize / 4; i++) { |
| uniphier_sd_writel(priv, *(*pbuf)++, |
| UNIPHIER_SD_BUF); |
| } |
| } |
| } else { |
| if (priv->caps & UNIPHIER_SD_CAP_64BIT) { |
| for (i = 0; i < blocksize / 8; i++) { |
| u64 data = get_unaligned((*pbuf)++); |
| data |= (u64)get_unaligned((*pbuf)++) << 32; |
| uniphier_sd_writeq(priv, data, |
| UNIPHIER_SD_BUF); |
| } |
| } else { |
| for (i = 0; i < blocksize / 4; i++) { |
| u32 data = get_unaligned((*pbuf)++); |
| uniphier_sd_writel(priv, data, |
| UNIPHIER_SD_BUF); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int uniphier_sd_pio_xfer(struct udevice *dev, struct mmc_data *data) |
| { |
| u32 *dest = (u32 *)data->dest; |
| const u32 *src = (const u32 *)data->src; |
| int i, ret; |
| |
| for (i = 0; i < data->blocks; i++) { |
| if (data->flags & MMC_DATA_READ) |
| ret = uniphier_sd_pio_read_one_block(dev, &dest, |
| data->blocksize); |
| else |
| ret = uniphier_sd_pio_write_one_block(dev, &src, |
| data->blocksize); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void uniphier_sd_dma_start(struct uniphier_sd_priv *priv, |
| dma_addr_t dma_addr) |
| { |
| u32 tmp; |
| |
| uniphier_sd_writel(priv, 0, UNIPHIER_SD_DMA_INFO1); |
| uniphier_sd_writel(priv, 0, UNIPHIER_SD_DMA_INFO2); |
| |
| /* enable DMA */ |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_EXTMODE); |
| tmp |= UNIPHIER_SD_EXTMODE_DMA_EN; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_EXTMODE); |
| |
| uniphier_sd_writel(priv, dma_addr & U32_MAX, UNIPHIER_SD_DMA_ADDR_L); |
| |
| /* suppress the warning "right shift count >= width of type" */ |
| dma_addr >>= min_t(int, 32, 8 * sizeof(dma_addr)); |
| |
| uniphier_sd_writel(priv, dma_addr & U32_MAX, UNIPHIER_SD_DMA_ADDR_H); |
| |
| uniphier_sd_writel(priv, UNIPHIER_SD_DMA_CTL_START, UNIPHIER_SD_DMA_CTL); |
| } |
| |
| static int uniphier_sd_dma_wait_for_irq(struct udevice *dev, u32 flag, |
| unsigned int blocks) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| long wait = 1000000 + 10 * blocks; |
| |
| while (!(uniphier_sd_readl(priv, UNIPHIER_SD_DMA_INFO1) & flag)) { |
| if (wait-- < 0) { |
| dev_err(dev, "timeout during DMA\n"); |
| return -ETIMEDOUT; |
| } |
| |
| udelay(10); |
| } |
| |
| if (uniphier_sd_readl(priv, UNIPHIER_SD_DMA_INFO2)) { |
| dev_err(dev, "error during DMA\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int uniphier_sd_dma_xfer(struct udevice *dev, struct mmc_data *data) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| size_t len = data->blocks * data->blocksize; |
| void *buf; |
| enum dma_data_direction dir; |
| dma_addr_t dma_addr; |
| u32 poll_flag, tmp; |
| int ret; |
| |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_DMA_MODE); |
| |
| if (data->flags & MMC_DATA_READ) { |
| buf = data->dest; |
| dir = DMA_FROM_DEVICE; |
| poll_flag = UNIPHIER_SD_DMA_INFO1_END_RD2; |
| tmp |= UNIPHIER_SD_DMA_MODE_DIR_RD; |
| } else { |
| buf = (void *)data->src; |
| dir = DMA_TO_DEVICE; |
| poll_flag = UNIPHIER_SD_DMA_INFO1_END_WR; |
| tmp &= ~UNIPHIER_SD_DMA_MODE_DIR_RD; |
| } |
| |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_DMA_MODE); |
| |
| dma_addr = __dma_map_single(buf, len, dir); |
| |
| uniphier_sd_dma_start(priv, dma_addr); |
| |
| ret = uniphier_sd_dma_wait_for_irq(dev, poll_flag, data->blocks); |
| |
| __dma_unmap_single(dma_addr, len, dir); |
| |
| return ret; |
| } |
| |
| /* check if the address is DMA'able */ |
| static bool uniphier_sd_addr_is_dmaable(unsigned long addr) |
| { |
| if (!IS_ALIGNED(addr, UNIPHIER_SD_DMA_MINALIGN)) |
| return false; |
| |
| #if defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARM64) && \ |
| defined(CONFIG_SPL_BUILD) |
| /* |
| * For UniPhier ARMv7 SoCs, the stack is allocated in the locked ways |
| * of L2, which is unreachable from the DMA engine. |
| */ |
| if (addr < CONFIG_SPL_STACK) |
| return false; |
| #endif |
| |
| return true; |
| } |
| |
| static int uniphier_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, |
| struct mmc_data *data) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| int ret; |
| u32 tmp; |
| |
| if (uniphier_sd_readl(priv, UNIPHIER_SD_INFO2) & UNIPHIER_SD_INFO2_CBSY) { |
| dev_err(dev, "command busy\n"); |
| return -EBUSY; |
| } |
| |
| /* clear all status flags */ |
| uniphier_sd_writel(priv, 0, UNIPHIER_SD_INFO1); |
| uniphier_sd_writel(priv, 0, UNIPHIER_SD_INFO2); |
| |
| /* disable DMA once */ |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_EXTMODE); |
| tmp &= ~UNIPHIER_SD_EXTMODE_DMA_EN; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_EXTMODE); |
| |
| uniphier_sd_writel(priv, cmd->cmdarg, UNIPHIER_SD_ARG); |
| |
| tmp = cmd->cmdidx; |
| |
| if (data) { |
| uniphier_sd_writel(priv, data->blocksize, UNIPHIER_SD_SIZE); |
| uniphier_sd_writel(priv, data->blocks, UNIPHIER_SD_SECCNT); |
| |
| /* Do not send CMD12 automatically */ |
| tmp |= UNIPHIER_SD_CMD_NOSTOP | UNIPHIER_SD_CMD_DATA; |
| |
| if (data->blocks > 1) |
| tmp |= UNIPHIER_SD_CMD_MULTI; |
| |
| if (data->flags & MMC_DATA_READ) |
| tmp |= UNIPHIER_SD_CMD_RD; |
| } |
| |
| /* |
| * Do not use the response type auto-detection on this hardware. |
| * CMD8, for example, has different response types on SD and eMMC, |
| * while this controller always assumes the response type for SD. |
| * Set the response type manually. |
| */ |
| switch (cmd->resp_type) { |
| case MMC_RSP_NONE: |
| tmp |= UNIPHIER_SD_CMD_RSP_NONE; |
| break; |
| case MMC_RSP_R1: |
| tmp |= UNIPHIER_SD_CMD_RSP_R1; |
| break; |
| case MMC_RSP_R1b: |
| tmp |= UNIPHIER_SD_CMD_RSP_R1B; |
| break; |
| case MMC_RSP_R2: |
| tmp |= UNIPHIER_SD_CMD_RSP_R2; |
| break; |
| case MMC_RSP_R3: |
| tmp |= UNIPHIER_SD_CMD_RSP_R3; |
| break; |
| default: |
| dev_err(dev, "unknown response type\n"); |
| return -EINVAL; |
| } |
| |
| dev_dbg(dev, "sending CMD%d (SD_CMD=%08x, SD_ARG=%08x)\n", |
| cmd->cmdidx, tmp, cmd->cmdarg); |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_CMD); |
| |
| ret = uniphier_sd_wait_for_irq(dev, UNIPHIER_SD_INFO1, |
| UNIPHIER_SD_INFO1_RSP); |
| if (ret) |
| return ret; |
| |
| if (cmd->resp_type & MMC_RSP_136) { |
| u32 rsp_127_104 = uniphier_sd_readl(priv, UNIPHIER_SD_RSP76); |
| u32 rsp_103_72 = uniphier_sd_readl(priv, UNIPHIER_SD_RSP54); |
| u32 rsp_71_40 = uniphier_sd_readl(priv, UNIPHIER_SD_RSP32); |
| u32 rsp_39_8 = uniphier_sd_readl(priv, UNIPHIER_SD_RSP10); |
| |
| cmd->response[0] = ((rsp_127_104 & 0x00ffffff) << 8) | |
| ((rsp_103_72 & 0xff000000) >> 24); |
| cmd->response[1] = ((rsp_103_72 & 0x00ffffff) << 8) | |
| ((rsp_71_40 & 0xff000000) >> 24); |
| cmd->response[2] = ((rsp_71_40 & 0x00ffffff) << 8) | |
| ((rsp_39_8 & 0xff000000) >> 24); |
| cmd->response[3] = (rsp_39_8 & 0xffffff) << 8; |
| } else { |
| /* bit 39-8 */ |
| cmd->response[0] = uniphier_sd_readl(priv, UNIPHIER_SD_RSP10); |
| } |
| |
| if (data) { |
| /* use DMA if the HW supports it and the buffer is aligned */ |
| if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL && |
| uniphier_sd_addr_is_dmaable((long)data->src)) |
| ret = uniphier_sd_dma_xfer(dev, data); |
| else |
| ret = uniphier_sd_pio_xfer(dev, data); |
| |
| ret = uniphier_sd_wait_for_irq(dev, UNIPHIER_SD_INFO1, |
| UNIPHIER_SD_INFO1_CMP); |
| if (ret) |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int uniphier_sd_set_bus_width(struct uniphier_sd_priv *priv, |
| struct mmc *mmc) |
| { |
| u32 val, tmp; |
| |
| switch (mmc->bus_width) { |
| case 1: |
| val = UNIPHIER_SD_OPTION_WIDTH_1; |
| break; |
| case 4: |
| val = UNIPHIER_SD_OPTION_WIDTH_4; |
| break; |
| case 8: |
| val = UNIPHIER_SD_OPTION_WIDTH_8; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_OPTION); |
| tmp &= ~UNIPHIER_SD_OPTION_WIDTH_MASK; |
| tmp |= val; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_OPTION); |
| |
| return 0; |
| } |
| |
| static void uniphier_sd_set_ddr_mode(struct uniphier_sd_priv *priv, |
| struct mmc *mmc) |
| { |
| u32 tmp; |
| |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_IF_MODE); |
| if (mmc->ddr_mode) |
| tmp |= UNIPHIER_SD_IF_MODE_DDR; |
| else |
| tmp &= ~UNIPHIER_SD_IF_MODE_DDR; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_IF_MODE); |
| } |
| |
| static void uniphier_sd_set_clk_rate(struct uniphier_sd_priv *priv, |
| struct mmc *mmc) |
| { |
| unsigned int divisor; |
| u32 val, tmp; |
| |
| if (!mmc->clock) |
| return; |
| |
| divisor = DIV_ROUND_UP(priv->mclk, mmc->clock); |
| |
| if (divisor <= 1) |
| val = UNIPHIER_SD_CLKCTL_DIV1; |
| else if (divisor <= 2) |
| val = UNIPHIER_SD_CLKCTL_DIV2; |
| else if (divisor <= 4) |
| val = UNIPHIER_SD_CLKCTL_DIV4; |
| else if (divisor <= 8) |
| val = UNIPHIER_SD_CLKCTL_DIV8; |
| else if (divisor <= 16) |
| val = UNIPHIER_SD_CLKCTL_DIV16; |
| else if (divisor <= 32) |
| val = UNIPHIER_SD_CLKCTL_DIV32; |
| else if (divisor <= 64) |
| val = UNIPHIER_SD_CLKCTL_DIV64; |
| else if (divisor <= 128) |
| val = UNIPHIER_SD_CLKCTL_DIV128; |
| else if (divisor <= 256) |
| val = UNIPHIER_SD_CLKCTL_DIV256; |
| else if (divisor <= 512 || !(priv->caps & UNIPHIER_SD_CAP_DIV1024)) |
| val = UNIPHIER_SD_CLKCTL_DIV512; |
| else |
| val = UNIPHIER_SD_CLKCTL_DIV1024; |
| |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_CLKCTL); |
| if (tmp & UNIPHIER_SD_CLKCTL_SCLKEN && |
| (tmp & UNIPHIER_SD_CLKCTL_DIV_MASK) == val) |
| return; |
| |
| /* stop the clock before changing its rate to avoid a glitch signal */ |
| tmp &= ~UNIPHIER_SD_CLKCTL_SCLKEN; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_CLKCTL); |
| |
| tmp &= ~UNIPHIER_SD_CLKCTL_DIV_MASK; |
| tmp |= val | UNIPHIER_SD_CLKCTL_OFFEN; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_CLKCTL); |
| |
| tmp |= UNIPHIER_SD_CLKCTL_SCLKEN; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_CLKCTL); |
| |
| udelay(1000); |
| } |
| |
| static int uniphier_sd_set_ios(struct udevice *dev) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| struct mmc *mmc = mmc_get_mmc_dev(dev); |
| int ret; |
| |
| dev_dbg(dev, "clock %uHz, DDRmode %d, width %u\n", |
| mmc->clock, mmc->ddr_mode, mmc->bus_width); |
| |
| ret = uniphier_sd_set_bus_width(priv, mmc); |
| if (ret) |
| return ret; |
| uniphier_sd_set_ddr_mode(priv, mmc); |
| uniphier_sd_set_clk_rate(priv, mmc); |
| |
| return 0; |
| } |
| |
| static int uniphier_sd_get_cd(struct udevice *dev) |
| { |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| |
| if (priv->caps & UNIPHIER_SD_CAP_NONREMOVABLE) |
| return 1; |
| |
| return !!(uniphier_sd_readl(priv, UNIPHIER_SD_INFO1) & |
| UNIPHIER_SD_INFO1_CD); |
| } |
| |
| static const struct dm_mmc_ops uniphier_sd_ops = { |
| .send_cmd = uniphier_sd_send_cmd, |
| .set_ios = uniphier_sd_set_ios, |
| .get_cd = uniphier_sd_get_cd, |
| }; |
| |
| static void uniphier_sd_host_init(struct uniphier_sd_priv *priv) |
| { |
| u32 tmp; |
| |
| /* soft reset of the host */ |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_SOFT_RST); |
| tmp &= ~UNIPHIER_SD_SOFT_RST_RSTX; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_SOFT_RST); |
| tmp |= UNIPHIER_SD_SOFT_RST_RSTX; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_SOFT_RST); |
| |
| /* FIXME: implement eMMC hw_reset */ |
| |
| uniphier_sd_writel(priv, UNIPHIER_SD_STOP_SEC, UNIPHIER_SD_STOP); |
| |
| /* |
| * Connected to 32bit AXI. |
| * This register dropped backward compatibility at version 0x10. |
| * Write an appropriate value depending on the IP version. |
| */ |
| uniphier_sd_writel(priv, priv->version >= 0x10 ? 0x00000101 : 0x00000000, |
| UNIPHIER_SD_HOST_MODE); |
| |
| if (priv->caps & UNIPHIER_SD_CAP_DMA_INTERNAL) { |
| tmp = uniphier_sd_readl(priv, UNIPHIER_SD_DMA_MODE); |
| tmp |= UNIPHIER_SD_DMA_MODE_ADDR_INC; |
| uniphier_sd_writel(priv, tmp, UNIPHIER_SD_DMA_MODE); |
| } |
| } |
| |
| static int uniphier_sd_bind(struct udevice *dev) |
| { |
| struct uniphier_sd_plat *plat = dev_get_platdata(dev); |
| |
| return mmc_bind(dev, &plat->mmc, &plat->cfg); |
| } |
| |
| static int uniphier_sd_probe(struct udevice *dev) |
| { |
| struct uniphier_sd_plat *plat = dev_get_platdata(dev); |
| struct uniphier_sd_priv *priv = dev_get_priv(dev); |
| struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev); |
| const u32 quirks = dev_get_driver_data(dev); |
| fdt_addr_t base; |
| struct clk clk; |
| int ret; |
| |
| base = devfdt_get_addr(dev); |
| if (base == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| priv->regbase = devm_ioremap(dev, base, SZ_2K); |
| if (!priv->regbase) |
| return -ENOMEM; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret < 0) { |
| dev_err(dev, "failed to get host clock\n"); |
| return ret; |
| } |
| |
| /* set to max rate */ |
| priv->mclk = clk_set_rate(&clk, ULONG_MAX); |
| if (IS_ERR_VALUE(priv->mclk)) { |
| dev_err(dev, "failed to set rate for host clock\n"); |
| clk_free(&clk); |
| return priv->mclk; |
| } |
| |
| ret = clk_enable(&clk); |
| clk_free(&clk); |
| if (ret) { |
| dev_err(dev, "failed to enable host clock\n"); |
| return ret; |
| } |
| |
| plat->cfg.name = dev->name; |
| plat->cfg.host_caps = MMC_MODE_HS_52MHz | MMC_MODE_HS; |
| |
| switch (fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "bus-width", |
| 1)) { |
| case 8: |
| plat->cfg.host_caps |= MMC_MODE_8BIT; |
| break; |
| case 4: |
| plat->cfg.host_caps |= MMC_MODE_4BIT; |
| break; |
| case 1: |
| break; |
| default: |
| dev_err(dev, "Invalid \"bus-width\" value\n"); |
| return -EINVAL; |
| } |
| |
| if (quirks) { |
| priv->caps = quirks; |
| } else { |
| priv->version = uniphier_sd_readl(priv, UNIPHIER_SD_VERSION) & |
| UNIPHIER_SD_VERSION_IP; |
| dev_dbg(dev, "version %x\n", priv->version); |
| if (priv->version >= 0x10) { |
| priv->caps |= UNIPHIER_SD_CAP_DMA_INTERNAL; |
| priv->caps |= UNIPHIER_SD_CAP_DIV1024; |
| } |
| } |
| |
| if (fdt_get_property(gd->fdt_blob, dev_of_offset(dev), "non-removable", |
| NULL)) |
| priv->caps |= UNIPHIER_SD_CAP_NONREMOVABLE; |
| |
| uniphier_sd_host_init(priv); |
| |
| plat->cfg.voltages = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34; |
| plat->cfg.f_min = priv->mclk / |
| (priv->caps & UNIPHIER_SD_CAP_DIV1024 ? 1024 : 512); |
| plat->cfg.f_max = priv->mclk; |
| plat->cfg.b_max = U32_MAX; /* max value of UNIPHIER_SD_SECCNT */ |
| |
| upriv->mmc = &plat->mmc; |
| |
| return 0; |
| } |
| |
| static const struct udevice_id uniphier_sd_match[] = { |
| { .compatible = "renesas,sdhi-r8a7795", .data = UNIPHIER_SD_CAP_64BIT }, |
| { .compatible = "renesas,sdhi-r8a7796", .data = UNIPHIER_SD_CAP_64BIT }, |
| { .compatible = "socionext,uniphier-sdhc", .data = 0 }, |
| { /* sentinel */ } |
| }; |
| |
| U_BOOT_DRIVER(uniphier_mmc) = { |
| .name = "uniphier-mmc", |
| .id = UCLASS_MMC, |
| .of_match = uniphier_sd_match, |
| .bind = uniphier_sd_bind, |
| .probe = uniphier_sd_probe, |
| .priv_auto_alloc_size = sizeof(struct uniphier_sd_priv), |
| .platdata_auto_alloc_size = sizeof(struct uniphier_sd_plat), |
| .ops = &uniphier_sd_ops, |
| }; |