| /* |
| * Copyright (C) 2011 Samsung Electronics |
| * Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * (C) Copyright 2010 |
| * Stefano Babic, DENX Software Engineering, sbabic@denx.de |
| * |
| * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <linux/types.h> |
| #include <power/pmic.h> |
| #include <spi.h> |
| |
| static struct spi_slave *slave; |
| |
| static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) |
| { |
| u32 pmic_tx, pmic_rx; |
| u32 tmp; |
| |
| if (!slave) { |
| slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk, |
| p->hw.spi.mode); |
| |
| if (!slave) |
| return -ENODEV; |
| } |
| |
| if (check_reg(p, reg)) |
| return -EINVAL; |
| |
| if (spi_claim_bus(slave)) |
| return -EBUSY; |
| |
| pmic_tx = p->hw.spi.prepare_tx(reg, val, write); |
| |
| tmp = cpu_to_be32(pmic_tx); |
| |
| if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, |
| pmic_spi_flags)) |
| goto err; |
| |
| if (write) { |
| pmic_tx = p->hw.spi.prepare_tx(reg, val, 0); |
| tmp = cpu_to_be32(pmic_tx); |
| if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, |
| pmic_spi_flags)) |
| goto err; |
| } |
| |
| spi_release_bus(slave); |
| *val = cpu_to_be32(pmic_rx); |
| |
| return 0; |
| |
| err: |
| spi_release_bus(slave); |
| return -ENOTSUPP; |
| } |
| |
| int pmic_reg_write(struct pmic *p, u32 reg, u32 val) |
| { |
| return pmic_reg(p, reg, &val, 1); |
| } |
| |
| int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) |
| { |
| return pmic_reg(p, reg, val, 0); |
| } |