blob: 84fe9378ab9381c58f72de310d51866de1e923ff [file] [log] [blame]
/*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/ixp425.h>
#ifdef CONFIG_USE_IRQ
#include <asm/proc-armv/ptrace.h>
/*
* When interrupts are enabled, use timer 2 for time/delay generation...
*/
#define FREQ 66666666
#define CLOCK_TICK_RATE (((FREQ / CFG_HZ & ~IXP425_OST_RELOAD_MASK) + 1) * CFG_HZ)
#define LATCH ((CLOCK_TICK_RATE + CFG_HZ/2) / CFG_HZ) /* For divider */
struct _irq_handler {
void *m_data;
void (*m_func)( void *data);
};
static struct _irq_handler IRQ_HANDLER[N_IRQS];
static volatile ulong timestamp;
static void default_isr(void *data)
{
printf("default_isr(): called for IRQ %d, Interrupt Status=%x PR=%x\n",
(int)data, *IXP425_ICIP, *IXP425_ICIH);
}
static int next_irq(void)
{
return (((*IXP425_ICIH & 0x000000fc) >> 2) - 1);
}
static void timer_isr(void *data)
{
unsigned int *pTime = (unsigned int *)data;
(*pTime)++;
/*
* Reset IRQ source
*/
*IXP425_OSST = IXP425_OSST_TIMER_2_PEND;
}
ulong get_timer (ulong base)
{
return timestamp - base;
}
void reset_timer (void)
{
timestamp = 0;
}
#endif /* #ifdef CONFIG_USE_IRQ */
#ifdef CONFIG_USE_IRQ
void do_irq (struct pt_regs *pt_regs)
{
int irq = next_irq();
IRQ_HANDLER[irq].m_func(IRQ_HANDLER[irq].m_data);
}
#endif
int interrupt_init (void)
{
#ifdef CONFIG_USE_IRQ
int i;
/* install default interrupt handlers */
for (i = 0; i < N_IRQS; i++) {
IRQ_HANDLER[i].m_data = (void *)i;
IRQ_HANDLER[i].m_func = default_isr;
}
/* install interrupt handler for timer */
IRQ_HANDLER[IXP425_TIMER_2_IRQ].m_data = (void *)&timestamp;
IRQ_HANDLER[IXP425_TIMER_2_IRQ].m_func = timer_isr;
/* setup the Timer counter value */
*IXP425_OSRT2 = (LATCH & ~IXP425_OST_RELOAD_MASK) | IXP425_OST_ENABLE;
/* configure interrupts for IRQ mode */
*IXP425_ICLR = 0x00000000;
/* enable timer irq */
*IXP425_ICMR = (1 << IXP425_TIMER_2_IRQ);
#endif
return (0);
}