include/configs/km/pg-wcom-ls102xa.h - platform/external/u-boot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2020 Hitachi Power Grids. All rights reserved.
  */

 #ifndef __CONFIG_PG_WCOM_LS102XA_H
 #define __CONFIG_PG_WCOM_LS102XA_H

 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"

 #define CONFIG_SYS_INIT_RAM_ADDR	OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE

 #define CONFIG_PRAM			((CONFIG_KM_PNVRAM + \
 					  CONFIG_KM_PHRAM + \
 					  CONFIG_KM_RESERVED_PRAM) >> 10)

 #define PHYS_SDRAM			0x80000000
 #define PHYS_SDRAM_SIZE			(1u * 1024 * 1024 * 1024)

 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	4

 #define CONFIG_SYS_SPD_BUS_NUM		0
 #define SPD_EEPROM_ADDRESS		0x54

 /* POST memory regions test */
 #define CONFIG_POST			(CONFIG_SYS_POST_MEM_REGIONS)
 #define CONFIG_POST_EXTERNAL_WORD_FUNCS

 /*
  * IFC Definitions
  */
 /* NOR Flash Definitions */
 #define CONFIG_SYS_FLASH_BASE		0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE

 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 				CSPR_PORT_SIZE_16 | \
 				CSPR_TE | \
 				CSPR_MSEL_NOR | \
 				CSPR_V)
 #define CONFIG_SYS_NOR_AMASK		IFC_AMASK(64 * 1024 * 1024)

 #define CONFIG_SYS_NOR_CSOR		(CSOR_NOR_AVD_TGL_PGM_EN | \
 					CSOR_NOR_ADM_SHIFT(0x4) | \
 					CSOR_NOR_NOR_MODE_ASYNC_NOR | \
 					CSOR_NOR_TRHZ_20 | \
 					CSOR_NOR_BCTLD)
 #define CONFIG_SYS_NOR_FTIM0		(FTIM0_NOR_TACSE(0x1) | \
 					FTIM0_NOR_TEADC(0x7) | \
 					FTIM0_NOR_TAVDS(0x0) | \
 					FTIM0_NOR_TEAHC(0x1))
 #define CONFIG_SYS_NOR_FTIM1		(FTIM1_NOR_TACO(0x1) | \
 					FTIM1_NOR_TRAD_NOR(0x21) | \
 					FTIM1_NOR_TSEQRAD_NOR(0x21))
 #define CONFIG_SYS_NOR_FTIM2		(FTIM2_NOR_TCS(0x1) | \
 					FTIM2_NOR_TCH(0x1) | \
 					FTIM2_NOR_TWPH(0x6) | \
 					FTIM2_NOR_TWP(0xb))
 #define CONFIG_SYS_NOR_FTIM3		0

 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45	/* count down from 45/5: 9..1 */

 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

 #define CONFIG_SYS_FLASH_EMPTY_INFO
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }

 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 #define CONFIG_SYS_WRITE_SWAPPED_DATA

 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3

 /* NAND Flash Definitions */
 #define CONFIG_SYS_NAND_BASE		0x68000000
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE

 #define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) | \
 				CSPR_PORT_SIZE_8 | \
 				CSPR_TE | \
 				CSPR_MSEL_NAND | \
 				CSPR_V)
 #define CONFIG_SYS_NAND_AMASK		IFC_AMASK(64 * 1024)
 #define CONFIG_SYS_NAND_CSOR		(CSOR_NAND_ECC_ENC_EN \
 					| CSOR_NAND_ECC_DEC_EN \
 					| CSOR_NAND_ECC_MODE_4 \
 					| CSOR_NAND_RAL_3 \
 					| CSOR_NAND_PGS_2K \
 					| CSOR_NAND_SPRZ_64 \
 					| CSOR_NAND_PB(64) \
 					| CSOR_NAND_TRHZ_40 \
 					| CSOR_NAND_BCTLD)

 #define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x3) | \
 					FTIM0_NAND_TWP(0x8) | \
 					FTIM0_NAND_TWCHT(0x3) | \
 					FTIM0_NAND_TWH(0x5))
 #define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x1e) | \
 					FTIM1_NAND_TWBE(0x1e) | \
 					FTIM1_NAND_TRR(0x6) | \
 					FTIM1_NAND_TRP(0x8))
 #define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x9) | \
 					FTIM2_NAND_TREH(0x5) | \
 					FTIM2_NAND_TWHRE(0x3c))
 #define CONFIG_SYS_NAND_FTIM3		(FTIM3_NAND_TWW(0x1e))

 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NAND_CSPR_EXT
 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3

 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }

 /* QRIO FPGA Definitions */
 #define CONFIG_SYS_QRIO_BASE		0x70000000
 #define CONFIG_SYS_QRIO_BASE_PHYS	CONFIG_SYS_QRIO_BASE

 #define CONFIG_SYS_CSPR2_EXT		(0x00)
 #define CONFIG_SYS_CSPR2	(CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \
 					CSPR_PORT_SIZE_8 | \
 					CSPR_TE | \
 					CSPR_MSEL_GPCM | \
 					CSPR_V)
 #define CONFIG_SYS_AMASK2		IFC_AMASK(64 * 1024)
 #define CONFIG_SYS_CSOR2		(CSOR_GPCM_ADM_SHIFT(0x4) | \
 					CSOR_GPCM_TRHZ_20 | \
 					CSOR_GPCM_BCTLD)
 #define CONFIG_SYS_CS2_FTIM0		(FTIM0_GPCM_TACSE(0x2) | \
 					FTIM0_GPCM_TEADC(0x8) | \
 					FTIM0_GPCM_TEAHC(0x2))
 #define CONFIG_SYS_CS2_FTIM1		(FTIM1_GPCM_TACO(0x2) | \
 					FTIM1_GPCM_TRAD(0x6))
 #define CONFIG_SYS_CS2_FTIM2		(FTIM2_GPCM_TCS(0x1) | \
 					FTIM2_GPCM_TCH(0x1) | \
 					FTIM2_GPCM_TWP(0x7))
 #define CONFIG_SYS_CS2_FTIM3		0x04000000

 /*
  * Serial Port
  */
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()

 /*
  * I2C
  */
 #define CONFIG_SYS_I2C_INIT_BOARD

 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_I2C_MAX_HOPS		1
 #define CONFIG_SYS_NUM_I2C_BUSES	3
 #define I2C_MUX_PCA_ADDR		0x70
 #define I2C_MUX_CH_DEFAULT		0x0
 #define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
 					{0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \
 					{1, {I2C_NULL_HOP}                 }, \
 				}

 /*
  * eTSEC
  */
 #ifdef CONFIG_TSEC_ENET
 #define CONFIG_ETHPRIME			"ethernet@2d90000"
 #endif

 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200
 #define COUNTER_FREQUENCY		8333333

 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		256
 #define CONFIG_FSL_DEVICE_DISABLE

 /*
  * Miscellaneous configurable options
  */

 #define CONFIG_LS102XA_STREAM_ID

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
 #define CONFIG_SYS_MONITOR_LEN		0x100000     /* 1Mbyte */

 #define CONFIG_SYS_BOOTCOUNT_BE

 /*
  * Environment
  */

 #define CONFIG_ENV_TOTAL_SIZE		0x40000
 #define ENV_DEL_ADDR		CONFIG_ENV_ADDR_REDUND  /* direct for newenv */

 #ifndef CONFIG_KM_DEF_ENV		/* if not set by keymile-common.h */
 #define CONFIG_KM_DEF_ENV
 #endif

 #ifndef CONFIG_KM_DEF_BOOT_ARGS_CPU
 #define CONFIG_KM_DEF_BOOT_ARGS_CPU		""
 #endif

 #define CONFIG_KM_DEF_ENV_CPU						\
 	"boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"			\
 	"cramfsloadfdt="						\
 		"cramfsload ${fdt_addr_r} "				\
 		"fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"		\
 	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"			\
 	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)	\
 		" +${filesize} && "					\
 		"erase " __stringify(CONFIG_SYS_MONITOR_BASE)		\
 		" +${filesize} && "					\
 		"cp.b ${load_addr_r} "					\
 		__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && "	\
 		"protect on " __stringify(CONFIG_SYS_MONITOR_BASE)	\
 		" +${filesize}\0"					\
 	"update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE)	\
 		" +${filesize} && "					\
 		"erase " __stringify(CONFIG_SYS_FLASH_BASE)		\
 		" +${filesize} && "					\
 		"cp.b ${load_addr_r} "					\
 		__stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && "	\
 		"protect on " __stringify(CONFIG_SYS_MONITOR_BASE)	\
 		" +" __stringify(CONFIG_SYS_MONITOR_LEN)"\0"		\
 	"set_fdthigh=true\0"			\
 	"checkfdt=true\0"						\
 	""

 #define CONFIG_KM_NEW_ENV						\
 	"newenv=protect off " __stringify(ENV_DEL_ADDR)			\
 		" +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "		\
 		"erase " __stringify(ENV_DEL_ADDR)			\
 		" +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "		\
 		"protect on " __stringify(ENV_DEL_ADDR)			\
 		" +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0"

 #define CONFIG_HW_ENV_SETTINGS						\
 	"hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi,"	\
 			"can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6,"	\
 			"asrc,spdif,lpuart1,ftm1\0"

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	CONFIG_KM_NEW_ENV						\
 	CONFIG_KM_DEF_ENV						\
 	CONFIG_HW_ENV_SETTINGS						\
 	"EEprom_ivm=pca9547:70:9\0"					\
 	"ethrotate=no\0"						\
 	""

 #define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
 #define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* Increase map for Linux */

 #define CONFIG_MISC_INIT_F

 #endif
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright 2020 Hitachi Power Grids. All rights reserved.
	*/

	#ifndef __CONFIG_PG_WCOM_LS102XA_H
	#define __CONFIG_PG_WCOM_LS102XA_H

	/* include common defines/options for all Keymile boards */
	#include "keymile-common.h"

	#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE

	#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + \
	CONFIG_KM_PHRAM + \
	CONFIG_KM_RESERVED_PRAM) >> 10)

	#define PHYS_SDRAM 0x80000000
	#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)

	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE

	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	#define CONFIG_CHIP_SELECTS_PER_CTRL 4

	#define CONFIG_SYS_SPD_BUS_NUM 0
	#define SPD_EEPROM_ADDRESS 0x54

	/* POST memory regions test */
	#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS)
	#define CONFIG_POST_EXTERNAL_WORD_FUNCS

	/*
	* IFC Definitions
	*/
	/* NOR Flash Definitions */
	#define CONFIG_SYS_FLASH_BASE 0x60000000
	#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE

	#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
	#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \| \
	CSPR_PORT_SIZE_16 \| \
	CSPR_TE \| \
	CSPR_MSEL_NOR \| \
	CSPR_V)
	#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024)

	#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN \| \
	CSOR_NOR_ADM_SHIFT(0x4) \| \
	CSOR_NOR_NOR_MODE_ASYNC_NOR \| \
	CSOR_NOR_TRHZ_20 \| \
	CSOR_NOR_BCTLD)
	#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) \| \
	FTIM0_NOR_TEADC(0x7) \| \
	FTIM0_NOR_TAVDS(0x0) \| \
	FTIM0_NOR_TEAHC(0x1))
	#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) \| \
	FTIM1_NOR_TRAD_NOR(0x21) \| \
	FTIM1_NOR_TSEQRAD_NOR(0x21))
	#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) \| \
	FTIM2_NOR_TCH(0x1) \| \
	FTIM2_NOR_TWPH(0x6) \| \
	FTIM2_NOR_TWP(0xb))
	#define CONFIG_SYS_NOR_FTIM3 0

	#define CONFIG_SYS_FLASH_QUIET_TEST
	#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */

	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */

	#define CONFIG_SYS_FLASH_EMPTY_INFO
	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }

	#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
	#define CONFIG_SYS_WRITE_SWAPPED_DATA

	#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
	#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
	#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
	#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
	#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
	#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
	#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
	#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3

	/* NAND Flash Definitions */
	#define CONFIG_SYS_NAND_BASE 0x68000000
	#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE

	#define CONFIG_SYS_NAND_CSPR_EXT (0x0)
	#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) \| \
	CSPR_PORT_SIZE_8 \| \
	CSPR_TE \| \
	CSPR_MSEL_NAND \| \
	CSPR_V)
	#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
	#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN \
	\| CSOR_NAND_ECC_DEC_EN \
	\| CSOR_NAND_ECC_MODE_4 \
	\| CSOR_NAND_RAL_3 \
	\| CSOR_NAND_PGS_2K \
	\| CSOR_NAND_SPRZ_64 \
	\| CSOR_NAND_PB(64) \
	\| CSOR_NAND_TRHZ_40 \
	\| CSOR_NAND_BCTLD)

	#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) \| \
	FTIM0_NAND_TWP(0x8) \| \
	FTIM0_NAND_TWCHT(0x3) \| \
	FTIM0_NAND_TWH(0x5))
	#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) \| \
	FTIM1_NAND_TWBE(0x1e) \| \
	FTIM1_NAND_TRR(0x6) \| \
	FTIM1_NAND_TRP(0x8))
	#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) \| \
	FTIM2_NAND_TREH(0x5) \| \
	FTIM2_NAND_TWHRE(0x3c))
	#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e))

	#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT
	#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
	#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
	#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
	#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
	#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
	#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
	#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3

	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }

	/* QRIO FPGA Definitions */
	#define CONFIG_SYS_QRIO_BASE 0x70000000
	#define CONFIG_SYS_QRIO_BASE_PHYS CONFIG_SYS_QRIO_BASE

	#define CONFIG_SYS_CSPR2_EXT (0x00)
	#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) \| \
	CSPR_PORT_SIZE_8 \| \
	CSPR_TE \| \
	CSPR_MSEL_GPCM \| \
	CSPR_V)
	#define CONFIG_SYS_AMASK2 IFC_AMASK(64 * 1024)
	#define CONFIG_SYS_CSOR2 (CSOR_GPCM_ADM_SHIFT(0x4) \| \
	CSOR_GPCM_TRHZ_20 \| \
	CSOR_GPCM_BCTLD)
	#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x2) \| \
	FTIM0_GPCM_TEADC(0x8) \| \
	FTIM0_GPCM_TEAHC(0x2))
	#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x2) \| \
	FTIM1_GPCM_TRAD(0x6))
	#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x1) \| \
	FTIM2_GPCM_TCH(0x1) \| \
	FTIM2_GPCM_TWP(0x7))
	#define CONFIG_SYS_CS2_FTIM3 0x04000000

	/*
	* Serial Port
	*/
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_CLK get_serial_clock()

	/*
	* I2C
	*/
	#define CONFIG_SYS_I2C_INIT_BOARD

	#define CONFIG_I2C_MULTI_BUS
	#define CONFIG_SYS_I2C_MAX_HOPS 1
	#define CONFIG_SYS_NUM_I2C_BUSES 3
	#define I2C_MUX_PCA_ADDR 0x70
	#define I2C_MUX_CH_DEFAULT 0x0
	#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
	{0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \
	{1, {I2C_NULL_HOP} }, \
	}

	/*
	* eTSEC
	*/
	#ifdef CONFIG_TSEC_ENET
	#define CONFIG_ETHPRIME "ethernet@2d90000"
	#endif

	#define CONFIG_LAYERSCAPE_NS_ACCESS
	#define CONFIG_SMP_PEN_ADDR 0x01ee0200
	#define COUNTER_FREQUENCY 8333333

	#define CONFIG_HWCONFIG
	#define HWCONFIG_BUFFER_SIZE 256
	#define CONFIG_FSL_DEVICE_DISABLE

	/*
	* Miscellaneous configurable options
	*/

	#define CONFIG_LS102XA_STREAM_ID

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
	#define CONFIG_SYS_MONITOR_LEN 0x100000 /* 1Mbyte */

	#define CONFIG_SYS_BOOTCOUNT_BE

	/*
	* Environment
	*/

	#define CONFIG_ENV_TOTAL_SIZE 0x40000
	#define ENV_DEL_ADDR CONFIG_ENV_ADDR_REDUND /* direct for newenv */

	#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */
	#define CONFIG_KM_DEF_ENV
	#endif

	#ifndef CONFIG_KM_DEF_BOOT_ARGS_CPU
	#define CONFIG_KM_DEF_BOOT_ARGS_CPU ""
	#endif

	#define CONFIG_KM_DEF_ENV_CPU \
	"boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \
	"cramfsloadfdt=" \
	"cramfsload ${fdt_addr_r} " \
	"fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \
	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \
	"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
	" +${filesize} && " \
	"erase " __stringify(CONFIG_SYS_MONITOR_BASE) \
	" +${filesize} && " \
	"cp.b ${load_addr_r} " \
	__stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \
	"protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
	" +${filesize}\0" \
	"update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \
	" +${filesize} && " \
	"erase " __stringify(CONFIG_SYS_FLASH_BASE) \
	" +${filesize} && " \
	"cp.b ${load_addr_r} " \
	__stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && " \
	"protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
	" +" __stringify(CONFIG_SYS_MONITOR_LEN)"\0" \
	"set_fdthigh=true\0" \
	"checkfdt=true\0" \
	""

	#define CONFIG_KM_NEW_ENV \
	"newenv=protect off " __stringify(ENV_DEL_ADDR) \
	" +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \
	"erase " __stringify(ENV_DEL_ADDR) \
	" +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \
	"protect on " __stringify(ENV_DEL_ADDR) \
	" +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0"

	#define CONFIG_HW_ENV_SETTINGS \
	"hwconfig=devdis:esdhc,usb3,usb2,sata,sec,dcu,duart2,qspi," \
	"can1,can2_4,ftm2_8,i2c2_3,sai1_4,lpuart2_6," \
	"asrc,spdif,lpuart1,ftm1\0"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_KM_NEW_ENV \
	CONFIG_KM_DEF_ENV \
	CONFIG_HW_ENV_SETTINGS \
	"EEprom_ivm=pca9547:70:9\0" \
	"ethrotate=no\0" \
	""

	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */

	#define CONFIG_MISC_INIT_F

	#endif