x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).
Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.
Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe
Not supported yet is:
- I2C
- USB 3.0
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/board/congatec/conga-qeval20-qa3-e3845/Kconfig b/board/congatec/conga-qeval20-qa3-e3845/Kconfig
new file mode 100644
index 0000000..9f31238
--- /dev/null
+++ b/board/congatec/conga-qeval20-qa3-e3845/Kconfig
@@ -0,0 +1,28 @@
+if TARGET_CONGA_QEVAL20_QA3_E3845
+
+config SYS_BOARD
+ default "conga-qeval20-qa3-e3845"
+
+config SYS_VENDOR
+ default "congatec"
+
+config SYS_SOC
+ default "baytrail"
+
+config SYS_CONFIG_NAME
+ default "conga-qeval20-qa3-e3845"
+
+config SYS_TEXT_BASE
+ default 0xfff00000 if !EFI_STUB
+ default 0x01110000 if EFI_STUB
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select X86_RESET_VECTOR if !EFI_STUB
+ select INTEL_BAYTRAIL
+ select BOARD_ROMSIZE_KB_8192
+
+config PCIE_ECAM_BASE
+ default 0xe0000000
+
+endif