| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| /* Copyright (c) 2020-2021 SiFive, Inc */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/clock/sifive-fu740-prci.h> |
| #include <dt-bindings/reset/sifive-fu740-prci.h> |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "sifive,fu740-c000", "sifive,fu740"; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| ethernet0 = ð0; |
| }; |
| |
| chosen { |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cpu0: cpu@0 { |
| compatible = "sifive,bullet0", "riscv"; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <128>; |
| i-cache-size = <16384>; |
| next-level-cache = <&ccache>; |
| reg = <0x0>; |
| riscv,isa = "rv64imac"; |
| status = "disabled"; |
| cpu0_intc: interrupt-controller { |
| #interrupt-cells = <1>; |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| }; |
| }; |
| cpu1: cpu@1 { |
| compatible = "sifive,bullet0", "riscv"; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <128>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| reg = <0x1>; |
| riscv,isa = "rv64imafdc"; |
| tlb-split; |
| cpu1_intc: interrupt-controller { |
| #interrupt-cells = <1>; |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| }; |
| }; |
| cpu2: cpu@2 { |
| compatible = "sifive,bullet0", "riscv"; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <128>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| reg = <0x2>; |
| riscv,isa = "rv64imafdc"; |
| tlb-split; |
| cpu2_intc: interrupt-controller { |
| #interrupt-cells = <1>; |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| }; |
| }; |
| cpu3: cpu@3 { |
| compatible = "sifive,bullet0", "riscv"; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <128>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| reg = <0x3>; |
| riscv,isa = "rv64imafdc"; |
| tlb-split; |
| cpu3_intc: interrupt-controller { |
| #interrupt-cells = <1>; |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| }; |
| }; |
| cpu4: cpu@4 { |
| compatible = "sifive,bullet0", "riscv"; |
| d-cache-block-size = <64>; |
| d-cache-sets = <64>; |
| d-cache-size = <32768>; |
| d-tlb-sets = <1>; |
| d-tlb-size = <40>; |
| device_type = "cpu"; |
| i-cache-block-size = <64>; |
| i-cache-sets = <128>; |
| i-cache-size = <32768>; |
| i-tlb-sets = <1>; |
| i-tlb-size = <40>; |
| mmu-type = "riscv,sv39"; |
| next-level-cache = <&ccache>; |
| reg = <0x4>; |
| riscv,isa = "rv64imafdc"; |
| tlb-split; |
| cpu4_intc: interrupt-controller { |
| #interrupt-cells = <1>; |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| }; |
| }; |
| }; |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "sifive,fu740-c000", "sifive,fu740", "simple-bus"; |
| ranges; |
| plic0: interrupt-controller@c000000 { |
| #interrupt-cells = <1>; |
| compatible = "sifive,plic-1.0.0"; |
| reg = <0x0 0xc000000 0x0 0x4000000>; |
| riscv,ndev = <69>; |
| interrupt-controller; |
| interrupts-extended = < |
| &cpu0_intc 0xffffffff |
| &cpu1_intc 0xffffffff &cpu1_intc 9 |
| &cpu2_intc 0xffffffff &cpu2_intc 9 |
| &cpu3_intc 0xffffffff &cpu3_intc 9 |
| &cpu4_intc 0xffffffff &cpu4_intc 9>; |
| }; |
| prci: clock-controller@10000000 { |
| compatible = "sifive,fu740-c000-prci"; |
| reg = <0x0 0x10000000 0x0 0x1000>; |
| clocks = <&hfclk>, <&rtcclk>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| uart0: serial@10010000 { |
| compatible = "sifive,fu740-c000-uart", "sifive,uart0"; |
| reg = <0x0 0x10010000 0x0 0x1000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <39>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| status = "disabled"; |
| }; |
| uart1: serial@10011000 { |
| compatible = "sifive,fu740-c000-uart", "sifive,uart0"; |
| reg = <0x0 0x10011000 0x0 0x1000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <40>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| status = "disabled"; |
| }; |
| i2c0: i2c@10030000 { |
| compatible = "sifive,fu740-c000-i2c", "sifive,i2c0"; |
| reg = <0x0 0x10030000 0x0 0x1000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <52>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| reg-shift = <2>; |
| reg-io-width = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| i2c1: i2c@10031000 { |
| compatible = "sifive,fu740-c000-i2c", "sifive,i2c0"; |
| reg = <0x0 0x10031000 0x0 0x1000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <53>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| reg-shift = <2>; |
| reg-io-width = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| qspi0: spi@10040000 { |
| compatible = "sifive,fu740-c000-spi", "sifive,spi0"; |
| reg = <0x0 0x10040000 0x0 0x1000 |
| 0x0 0x20000000 0x0 0x10000000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <41>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| qspi1: spi@10041000 { |
| compatible = "sifive,fu740-c000-spi", "sifive,spi0"; |
| reg = <0x0 0x10041000 0x0 0x1000 |
| 0x0 0x30000000 0x0 0x10000000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <42>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| spi0: spi@10050000 { |
| compatible = "sifive,fu740-c000-spi", "sifive,spi0"; |
| reg = <0x0 0x10050000 0x0 0x1000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <43>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| eth0: ethernet@10090000 { |
| compatible = "sifive,fu540-c000-gem"; |
| interrupt-parent = <&plic0>; |
| interrupts = <55>; |
| reg = <0x0 0x10090000 0x0 0x2000 |
| 0x0 0x100a0000 0x0 0x1000>; |
| local-mac-address = [00 00 00 00 00 00]; |
| clock-names = "pclk", "hclk"; |
| clocks = <&prci PRCI_CLK_GEMGXLPLL>, |
| <&prci PRCI_CLK_GEMGXLPLL>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| pwm0: pwm@10020000 { |
| compatible = "sifive,fu740-c000-pwm", "sifive,pwm0"; |
| reg = <0x0 0x10020000 0x0 0x1000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <44 45 46 47>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| pwm1: pwm@10021000 { |
| compatible = "sifive,fu740-c000-pwm", "sifive,pwm0"; |
| reg = <0x0 0x10021000 0x0 0x1000>; |
| interrupt-parent = <&plic0>; |
| interrupts = <48 49 50 51>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| ccache: cache-controller@2010000 { |
| compatible = "sifive,fu740-c000-ccache", "cache"; |
| cache-block-size = <64>; |
| cache-level = <2>; |
| cache-sets = <2048>; |
| cache-size = <2097152>; |
| cache-unified; |
| interrupt-parent = <&plic0>; |
| interrupts = <19 21 22 20>; |
| reg = <0x0 0x2010000 0x0 0x1000>; |
| }; |
| gpio: gpio@10060000 { |
| compatible = "sifive,fu740-c000-gpio", "sifive,gpio0"; |
| interrupt-parent = <&plic0>; |
| interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, |
| <30>, <31>, <32>, <33>, <34>, <35>, <36>, |
| <37>, <38>; |
| reg = <0x0 0x10060000 0x0 0x1000>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&prci PRCI_CLK_PCLK>; |
| status = "disabled"; |
| }; |
| pcie@e00000000 { |
| #address-cells = <3>; |
| #interrupt-cells = <1>; |
| #num-lanes = <8>; |
| #size-cells = <2>; |
| compatible = "sifive,fu740-pcie"; |
| reg = <0xe 0x00000000 0x1 0x0 |
| 0xd 0xf0000000 0x0 0x10000000 |
| 0x0 0x100d0000 0x0 0x1000>; |
| reg-names = "dbi", "config", "mgmt"; |
| device_type = "pci"; |
| dma-coherent; |
| bus-range = <0x0 0xff>; |
| ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000 |
| 0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000 |
| 0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000 |
| 0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; |
| num-lanes = <0x8>; |
| interrupts = <56 57 58 59 60 61 62 63 64>; |
| interrupt-names = "msi", "inta", "intb", "intc", "intd"; |
| interrupt-parent = <&plic0>; |
| interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, |
| <0x0 0x0 0x0 0x2 &plic0 58>, |
| <0x0 0x0 0x0 0x3 &plic0 59>, |
| <0x0 0x0 0x0 0x4 &plic0 60>; |
| pwren-gpios = <&gpio 5 0>; |
| reset-gpios = <&gpio 8 0>; |
| clocks = <&prci PRCI_CLK_PCIEAUX>; |
| clock-names = "pcieaux"; |
| resets = <&prci PRCI_RST_PCIE_POWER_UP_N>; |
| reset-names = "rst_n"; |
| |
| status = "okay"; |
| }; |
| }; |
| }; |