| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Device Tree Source for the Eagle board |
| * |
| * Copyright (C) 2016-2017 Renesas Electronics Corp. |
| * Copyright (C) 2017 Cogent Embedded, Inc. |
| */ |
| |
| /dts-v1/; |
| #include "r8a77970.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "Renesas Eagle board based on r8a77970"; |
| compatible = "renesas,eagle", "renesas,r8a77970"; |
| |
| aliases { |
| serial0 = &scif0; |
| ethernet0 = &avb; |
| }; |
| |
| chosen { |
| bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@48000000 { |
| device_type = "memory"; |
| /* first 128MB is reserved for secure area. */ |
| reg = <0x0 0x48000000 0x0 0x38000000>; |
| }; |
| }; |
| |
| &avb { |
| pinctrl-0 = <&avb0_pins>; |
| pinctrl-names = "default"; |
| renesas,no-ether-link; |
| phy-handle = <&phy0>; |
| phy-mode = "rgmii-id"; |
| status = "okay"; |
| |
| phy0: ethernet-phy@0 { |
| rxc-skew-ps = <1500>; |
| reg = <0>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <17 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &extal_clk { |
| clock-frequency = <16666666>; |
| }; |
| |
| &extalr_clk { |
| clock-frequency = <32768>; |
| }; |
| |
| &i2c0 { |
| pinctrl-0 = <&i2c0_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| io_expander: gpio@20 { |
| compatible = "onnn,pca9654"; |
| reg = <0x20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| &pfc { |
| avb0_pins: avb { |
| mux { |
| groups = "avb0_link", "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; |
| function = "avb0"; |
| }; |
| }; |
| |
| i2c0_pins: i2c0 { |
| groups = "i2c0"; |
| function = "i2c0"; |
| }; |
| |
| scif0_pins: scif0 { |
| groups = "scif0_data"; |
| function = "scif0"; |
| }; |
| }; |
| |
| &rwdt { |
| timeout-sec = <60>; |
| status = "okay"; |
| }; |
| |
| &scif0 { |
| pinctrl-0 = <&scif0_pins>; |
| pinctrl-names = "default"; |
| |
| status = "okay"; |
| }; |