| CONFIG_ARM=y |
| CONFIG_ARCH_CPU_INIT=y |
| CONFIG_ARCH_OMAP2PLUS=y |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0x20000 |
| CONFIG_DM_GPIO=y |
| CONFIG_AM33XX=y |
| CONFIG_TARGET_CHILIBOARD=y |
| CONFIG_SPL_MMC_SUPPORT=y |
| CONFIG_SPL_SERIAL_SUPPORT=y |
| CONFIG_SPL=y |
| CONFIG_ENV_OFFSET_REDUND=0x22000 |
| CONFIG_SPL_FS_FAT=y |
| CONFIG_SPL_LIBDISK_SUPPORT=y |
| CONFIG_DEFAULT_DEVICE_TREE="am335x-chiliboard" |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_BOOTDELAY=1 |
| # CONFIG_USE_BOOTCOMMAND is not set |
| CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb" |
| CONFIG_SYS_CONSOLE_INFO_QUIET=y |
| CONFIG_ARCH_MISC_INIT=y |
| CONFIG_SPL_I2C_SUPPORT=y |
| CONFIG_SPL_NAND_DRIVERS=y |
| CONFIG_SPL_NAND_ECC=y |
| CONFIG_SPL_NAND_BASE=y |
| CONFIG_SPL_POWER_SUPPORT=y |
| CONFIG_SPL_WATCHDOG_SUPPORT=y |
| CONFIG_CMD_ASKENV=y |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_NAND=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_BOOTP_DNS2=y |
| CONFIG_CMD_EXT4_WRITE=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=8000000.nand" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=8000000.nand:128k(NAND.SPL),128k(NAND.SPL.backup1),128k(NAND.SPL.backup2),128k(NAND.SPL.backup3),256k(NAND.u-boot-spl-os),1m(NAND.u-boot),128k(NAND.u-boot-env),128k(NAND.u-boot-env.backup1),8m(NAND.kernel),-(NAND.file-system)" |
| CONFIG_OF_CONTROL=y |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_SYS_REDUNDAND_ENVIRONMENT=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_BOOTP_SEND_HOSTNAME=y |
| CONFIG_BOOTCOUNT_LIMIT=y |
| CONFIG_MISC=y |
| CONFIG_MMC_OMAP_HS=y |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_PHY_SMSC=y |
| CONFIG_DM_ETH=y |
| CONFIG_MII=y |
| CONFIG_DRIVER_TI_CPSW=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_OMAP3_SPI=y |
| CONFIG_TIMER=y |
| CONFIG_OMAP_TIMER=y |
| CONFIG_USB=y |
| CONFIG_DM_USB=y |
| CONFIG_USB_MUSB_HOST=y |
| CONFIG_USB_MUSB_TI=y |
| CONFIG_LZO=y |