| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2020 Hitachi Power Grids. All rights reserved. |
| */ |
| |
| #ifndef __CONFIG_PG_WCOM_SELI8_H |
| #define __CONFIG_PG_WCOM_SELI8_H |
| |
| #define CONFIG_HOSTNAME "SELI8" |
| |
| #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" |
| #define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" |
| |
| /* PAXK FPGA Definitions */ |
| #define CONFIG_SYS_CSPR3_EXT (0x00) |
| #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_PAX_BASE) | \ |
| CSPR_PORT_SIZE_8 | \ |
| CSPR_MSEL_GPCM | \ |
| CSPR_V) |
| #define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) |
| #define CONFIG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ |
| CSOR_GPCM_TRHZ_40) |
| #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ |
| FTIM0_GPCM_TEADC(0x7) | \ |
| FTIM0_GPCM_TEAHC(0x2)) |
| #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ |
| FTIM1_GPCM_TRAD(0x12)) |
| #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ |
| FTIM2_GPCM_TCH(0x1) | \ |
| FTIM2_GPCM_TWP(0x12)) |
| #define CONFIG_SYS_CS3_FTIM3 0x04000000 |
| |
| /* PRST */ |
| #define KM_LIU_RST 0 |
| #define KM_PAXK_RST 1 |
| #define KM_DBG_ETH_RST 15 |
| |
| /* QRIO GPIOs used for deblocking */ |
| #define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A |
| #define KM_I2C_DEBLOCK_SCL 20 |
| #define KM_I2C_DEBLOCK_SDA 21 |
| |
| #include "km/pg-wcom-ls102xa.h" |
| |
| #endif /* __CONFIG_PG_WCOM_SELI8_H */ |