| /dts-v1/; |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "andestech,ax25"; |
| model = "andestech,ax25"; |
| |
| aliases { |
| uart0 = &serial0; |
| spi0 = &spi; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0xf0300000 debug loglevel=7"; |
| stdout-path = "uart0:38400n8"; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| timebase-frequency = <10000000>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| status = "okay"; |
| compatible = "riscv"; |
| riscv,isa = "rv64imafdc"; |
| mmu-type = "riscv,sv39"; |
| clock-frequency = <60000000>; |
| |
| CPU0_intc: interrupt-controller { |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| compatible = "riscv,cpu-intc"; |
| }; |
| }; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x00000000 0x0 0x40000000>; |
| }; |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "andestech,riscv-ae350-soc"; |
| ranges; |
| }; |
| |
| plmt0@e6000000 { |
| compatible = "riscv,plmt0"; |
| interrupts-extended = <&CPU0_intc 7>; |
| reg = <0x0 0xe6000000 0x0 0x100000>; |
| }; |
| |
| plic0: interrupt-controller@e4000000 { |
| compatible = "riscv,plic0"; |
| #address-cells = <2>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| reg = <0x0 0xe4000000 0x0 0x2000000>; |
| riscv,ndev=<31>; |
| interrupts-extended = <&CPU0_intc 11 &CPU0_intc 9>; |
| }; |
| |
| plic1: interrupt-controller@e6400000 { |
| compatible = "riscv,plic1"; |
| #address-cells = <2>; |
| #interrupt-cells = <2>; |
| interrupt-controller; |
| reg = <0x0 0xe6400000 0x0 0x400000>; |
| riscv,ndev=<1>; |
| interrupts-extended = <&CPU0_intc 3>; |
| }; |
| |
| spiclk: virt_100mhz { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <100000000>; |
| }; |
| |
| timer0: timer@f0400000 { |
| compatible = "andestech,atcpit100"; |
| reg = <0x0 0xf0400000 0x0 0x1000>; |
| clock-frequency = <40000000>; |
| interrupts = <3 4>; |
| interrupt-parent = <&plic0>; |
| }; |
| |
| serial0: serial@f0300000 { |
| compatible = "andestech,uart16550", "ns16550a"; |
| reg = <0x0 0xf0300000 0x0 0x1000>; |
| interrupts = <9 4>; |
| clock-frequency = <19660800>; |
| reg-shift = <2>; |
| reg-offset = <32>; |
| no-loopback-test = <1>; |
| interrupt-parent = <&plic0>; |
| }; |
| |
| mac0: mac@e0100000 { |
| compatible = "andestech,atmac100"; |
| reg = <0x0 0xe0100000 0x0 0x1000>; |
| interrupts = <19 4>; |
| interrupt-parent = <&plic0>; |
| }; |
| |
| mmc0: mmc@f0e00000 { |
| compatible = "andestech,atfsdc010"; |
| max-frequency = <100000000>; |
| clock-freq-min-max = <400000 100000000>; |
| fifo-depth = <0x10>; |
| reg = <0x0 0xf0e00000 0x0 0x1000>; |
| interrupts = <18 4>; |
| cap-sd-highspeed; |
| interrupt-parent = <&plic0>; |
| }; |
| |
| smc0: smc@e0400000 { |
| compatible = "andestech,atfsmc020"; |
| reg = <0x0 0xe0400000 0x0 0x1000>; |
| }; |
| |
| nor@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0x0 0x88000000 0x0 0x1000>; |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| spi: spi@f0b00000 { |
| compatible = "andestech,atcspi200"; |
| reg = <0x0 0xf0b00000 0x0 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| num-cs = <1>; |
| clocks = <&spiclk>; |
| interrupts = <3 4>; |
| interrupt-parent = <&plic0>; |
| |
| flash@0 { |
| compatible = "spi-flash"; |
| spi-max-frequency = <50000000>; |
| reg = <0>; |
| spi-cpol; |
| spi-cpha; |
| }; |
| }; |
| }; |