| /* |
| * SPI flash interface |
| * |
| * Copyright (C) 2008 Atmel Corporation |
| */ |
| #define DEBUG |
| #include <common.h> |
| #include <malloc.h> |
| #include <spi.h> |
| #include <spi_flash.h> |
| |
| #include "spi_flash_internal.h" |
| |
| int spi_flash_cmd(struct spi_slave *spi, u8 cmd, void *response, size_t len) |
| { |
| unsigned long flags = SPI_XFER_BEGIN; |
| int ret; |
| |
| if (len == 0) |
| flags |= SPI_XFER_END; |
| |
| ret = spi_xfer(spi, 8, &cmd, NULL, flags); |
| if (ret) { |
| debug("SF: Failed to send command %02x: %d\n", cmd, ret); |
| return ret; |
| } |
| |
| if (len) { |
| ret = spi_xfer(spi, len * 8, NULL, response, SPI_XFER_END); |
| if (ret) |
| debug("SF: Failed to read response (%zu bytes): %d\n", |
| len, ret); |
| } |
| |
| return ret; |
| } |
| |
| int spi_flash_cmd_read(struct spi_slave *spi, const u8 *cmd, |
| size_t cmd_len, void *data, size_t data_len) |
| { |
| unsigned long flags = SPI_XFER_BEGIN; |
| int ret; |
| |
| if (data_len == 0) |
| flags |= SPI_XFER_END; |
| |
| ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); |
| if (ret) { |
| debug("SF: Failed to send read command (%zu bytes): %d\n", |
| cmd_len, ret); |
| } else if (data_len != 0) { |
| ret = spi_xfer(spi, data_len * 8, NULL, data, SPI_XFER_END); |
| if (ret) |
| debug("SF: Failed to read %zu bytes of data: %d\n", |
| data_len, ret); |
| } |
| |
| return ret; |
| } |
| |
| int spi_flash_cmd_write(struct spi_slave *spi, const u8 *cmd, size_t cmd_len, |
| const void *data, size_t data_len) |
| { |
| unsigned long flags = SPI_XFER_BEGIN; |
| int ret; |
| |
| if (data_len == 0) |
| flags |= SPI_XFER_END; |
| |
| ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); |
| if (ret) { |
| debug("SF: Failed to send read command (%zu bytes): %d\n", |
| cmd_len, ret); |
| } else if (data_len != 0) { |
| ret = spi_xfer(spi, data_len * 8, data, NULL, SPI_XFER_END); |
| if (ret) |
| debug("SF: Failed to read %zu bytes of data: %d\n", |
| data_len, ret); |
| } |
| |
| return ret; |
| } |
| |
| |
| int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, |
| size_t cmd_len, void *data, size_t data_len) |
| { |
| struct spi_slave *spi = flash->spi; |
| int ret; |
| |
| spi_claim_bus(spi); |
| ret = spi_flash_cmd_read(spi, cmd, cmd_len, data, data_len); |
| spi_release_bus(spi); |
| |
| return ret; |
| } |
| |
| struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, |
| unsigned int max_hz, unsigned int spi_mode) |
| { |
| struct spi_slave *spi; |
| struct spi_flash *flash; |
| int ret; |
| u8 idcode[3]; |
| |
| spi = spi_setup_slave(bus, cs, max_hz, spi_mode); |
| if (!spi) { |
| debug("SF: Failed to set up slave\n"); |
| return NULL; |
| } |
| |
| ret = spi_claim_bus(spi); |
| if (ret) { |
| debug("SF: Failed to claim SPI bus: %d\n", ret); |
| goto err_claim_bus; |
| } |
| |
| /* Read the ID codes */ |
| ret = spi_flash_cmd(spi, CMD_READ_ID, &idcode, sizeof(idcode)); |
| if (ret) |
| goto err_read_id; |
| |
| debug("SF: Got idcode %02x %02x %02x\n", idcode[0], |
| idcode[1], idcode[2]); |
| |
| switch (idcode[0]) { |
| #ifdef CONFIG_SPI_FLASH_SPANSION |
| case 0x01: |
| flash = spi_flash_probe_spansion(spi, idcode); |
| break; |
| #endif |
| #ifdef CONFIG_SPI_FLASH_ATMEL |
| case 0x1F: |
| flash = spi_flash_probe_atmel(spi, idcode); |
| break; |
| #endif |
| #ifdef CONFIG_SPI_FLASH_STMICRO |
| case 0x20: |
| flash = spi_flash_probe_stmicro(spi, idcode); |
| break; |
| #endif |
| default: |
| debug("SF: Unsupported manufacturer %02X\n", idcode[0]); |
| flash = NULL; |
| break; |
| } |
| |
| if (!flash) |
| goto err_manufacturer_probe; |
| |
| spi_release_bus(spi); |
| |
| return flash; |
| |
| err_manufacturer_probe: |
| err_read_id: |
| spi_release_bus(spi); |
| err_claim_bus: |
| spi_free_slave(spi); |
| return NULL; |
| } |
| |
| void spi_flash_free(struct spi_flash *flash) |
| { |
| spi_free_slave(flash->spi); |
| free(flash); |
| } |