blob: 65d45c197f0053cc6ad9c4c1d4ca036a818f9167 [file] [log] [blame]
/*
* (C) Copyright 2001
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2001-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <mpc8xx.h>
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
const uint sdram_table[] = {
#if (MPC8XX_SPEED <= 50000000L)
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x0F07EC04, 0x01BBD804, 0x1FF7F440, 0xFFFFFC07,
0xFFFFFFFF,
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FE7F434, 0xEFABE834, 0x1FA7D435,
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x0F07EC04, 0x10EFDC04, 0xF0AFFC00, 0xF0AFFC00,
0xF1AFFC00, 0xFFAFFC40, 0xFFAFFC07, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x0E07E804, 0x01BBD000, 0x1FF7F447, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x0E07E800, 0x10EFD400, 0xF0AFFC00, 0xF0AFFC00,
0xF1AFFC47, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FF7DC84, 0xFFFFFC04, 0xFFFFFC84, 0xFFFFFC07,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7FFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF
#else
/*
* Single Read. (Offset 0 in UPMA RAM)
*/
0x1F07FC04, 0xEEAFEC04, 0x11AFDC04, 0xEFBBF800,
0x1FF7F447,
/*
* SDRAM Initialization (offset 5 in UPMA RAM)
*
* This is no UPM entry point. The following definition uses
* the remaining space to establish an initialization
* sequence, which is executed by a RUN command.
*
*/
0x1FF7F434, 0xEFEBE834, 0x1FB7D435,
/*
* Burst Read. (Offset 8 in UPMA RAM)
*/
0x1F07FC04, 0xEEAFEC04, 0x10AFDC04, 0xF0AFFC00,
0xF0AFFC00, 0xF1AFFC00, 0xEFBBF800, 0x1FF7F447,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPMA RAM)
*/
0x1F07FC04, 0xEEAFE800, 0x01BBD004, 0x1FF7F447,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPMA RAM)
*/
0x1F07FC04, 0xEEAFE800, 0x10AFD400, 0xF0AFFC00,
0xF0AFFC00, 0xE1BBF804, 0x1FF7F447, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPMA RAM)
*/
0x1FF7DC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
0xFFFFFC84, 0xFFFFFC07,
_NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPMA RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
#endif
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*
*/
int checkboard (void)
{
printf ("Board: Nexus NX823");
return (0);
}
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size_b0, size_b1, size8, size9;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Up to 2 Banks of 64Mbit x 2 devices
* Initial builds only have 1
*/
memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
memctl->memc_mar = 0x00000088;
/*
* Map controller SDRAM bank 0
*/
memctl->memc_or1 = CFG_OR1_PRELIM;
memctl->memc_br1 = CFG_BR1_PRELIM;
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/*
* Map controller SDRAM bank 1
*/
memctl->memc_or2 = CFG_OR2_PRELIM;
memctl->memc_br2 = CFG_BR2_PRELIM;
/*
* Perform SDRAM initializsation sequence
*/
memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */
udelay (1);
memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */
udelay (1);
memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */
udelay (1);
memctl->memc_mcr = 0x80004230; /* SDRAM bank 1 - execute twice */
udelay (1);
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Check Bank 0 Memory Size for re-configuration
*
* try 8 column mode
*/
size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE1_PRELIM,
SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE1_PRELIM,
SDRAM_MAX_SIZE);
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size_b0 = size8;
memctl->memc_mamr = CFG_MAMR_8COL;
udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
/*
* Check Bank 1 Memory Size
* use current column settings
* [9 column SDRAM may also be used in 8 column mode,
* but then only half the real size will be used.]
*/
size_b1 = dram_size (memctl->memc_mamr, (long *) SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
udelay (1000);
/*
* Adjust refresh rate depending on SDRAM type, both banks
* For types > 128 MBit leave it at the current (fast) rate
*/
if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
/* reduce to 15.6 us (62.4 us / quad) */
memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping: map bigger bank first
*/
if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */
memctl->memc_or2 =
((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
memctl->memc_br2 =
(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
if (size_b0 > 0) {
/*
* Position Bank 0 immediately above Bank 1
*/
memctl->memc_or1 =
((-size_b0) & 0xFFFF0000) |
CFG_OR_TIMING_SDRAM;
memctl->memc_br1 =
((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
BR_V)
+ size_b1;
} else {
unsigned long reg;
/*
* No bank 0
*
* invalidate bank
*/
memctl->memc_br1 = 0;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
}
} else { /* SDRAM Bank 0 is bigger - map first */
memctl->memc_or1 =
((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
memctl->memc_br1 =
(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
if (size_b1 > 0) {
/*
* Position Bank 1 immediately above Bank 0
*/
memctl->memc_or2 =
((-size_b1) & 0xFFFF0000) |
CFG_OR_TIMING_SDRAM;
memctl->memc_br2 =
((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA |
BR_V)
+ size_b0;
} else {
unsigned long reg;
/*
* No bank 1
*
* invalidate bank
*/
memctl->memc_br2 = 0;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
}
}
udelay (10000);
return (size_b0 + size_b1);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base,
long int maxsize)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
return (get_ram_size (base, maxsize));
}
u_long *my_sernum;
int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
char tmp[50];
u_char *e = gd->bd->bi_enetaddr;
/* save serial numbre from flash (uniquely programmed) */
my_sernum = malloc (8);
memcpy (my_sernum, gd->bd->bi_sernum, 8);
/* save env variables according to sernum */
sprintf (tmp, "%08lx%08lx", my_sernum[0], my_sernum[1]);
setenv ("serial#", tmp);
sprintf (tmp, "%02x:%02x:%02x:%02x:%02x:%02x", e[0], e[1], e[2], e[3],
e[4], e[5]);
setenv ("ethaddr", tmp);
return (0);
}
void load_sernum_ethaddr (void)
{
DECLARE_GLOBAL_DATA_PTR;
int i;
bd_t *bd = gd->bd;
for (i = 0; i < 8; i++) {
bd->bi_sernum[i] = *(u_char *) (CFG_FLASH_SN_BASE + i);
}
bd->bi_enetaddr[0] = 0x10;
bd->bi_enetaddr[1] = 0x20;
bd->bi_enetaddr[2] = 0x30;
bd->bi_enetaddr[3] = bd->bi_sernum[1] << 4 | bd->bi_sernum[2];
bd->bi_enetaddr[4] = bd->bi_sernum[5];
bd->bi_enetaddr[5] = bd->bi_sernum[6];
}