| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ |
| */ |
| |
| #include <asm/io.h> |
| #include <clk.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <dm/device_compat.h> |
| #include <linux/bitops.h> |
| #include <linux/err.h> |
| |
| #define UFS_SS_CTRL 0x4 |
| #define UFS_SS_RST_N_PCS BIT(0) |
| #define UFS_SS_CLK_26MHZ BIT(4) |
| |
| static int ti_j721e_ufs_probe(struct udevice *dev) |
| { |
| void __iomem *base; |
| unsigned int clock; |
| struct clk clk; |
| u32 reg = 0; |
| int ret; |
| |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret) { |
| dev_err(dev, "failed to get M-PHY clock\n"); |
| return ret; |
| } |
| |
| clock = clk_get_rate(&clk); |
| if (IS_ERR_VALUE(clock)) { |
| dev_err(dev, "failed to get rate\n"); |
| return ret; |
| } |
| |
| base = dev_remap_addr_index(dev, 0); |
| |
| if (clock == 26000000) |
| reg |= UFS_SS_CLK_26MHZ; |
| /* Take UFS slave device out of reset */ |
| reg |= UFS_SS_RST_N_PCS; |
| writel(reg, base + UFS_SS_CTRL); |
| |
| return 0; |
| } |
| |
| static int ti_j721e_ufs_remove(struct udevice *dev) |
| { |
| void __iomem *base = dev_remap_addr_index(dev, 0); |
| u32 reg = readl(base + UFS_SS_CTRL); |
| |
| reg &= ~UFS_SS_RST_N_PCS; |
| writel(reg, base + UFS_SS_CTRL); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id ti_j721e_ufs_ids[] = { |
| { |
| .compatible = "ti,j721e-ufs", |
| }, |
| {}, |
| }; |
| |
| U_BOOT_DRIVER(ti_j721e_ufs) = { |
| .name = "ti-j721e-ufs", |
| .id = UCLASS_MISC, |
| .of_match = ti_j721e_ufs_ids, |
| .probe = ti_j721e_ufs_probe, |
| .remove = ti_j721e_ufs_remove, |
| .flags = DM_FLAG_OS_PREPARE, |
| }; |